Tender For Addn/ Altn To Main Guard Room Bldg, False Ceiling & Certain B/R Works In Bldg No. T-232, Provn Of Misc Works In Esd Lab And Fire Retardant Roof Ceiling On Old Eqpt Room Of Afnet Section Of Eti, Shelter For 100 Kva Dg Set At Eti And Parking
Tender Value
Ref. Documents
Estimated cost
Bid Submission
22 Jul 2026
12 days left
EMD
91500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/ Altn To Main Guard Room Bldg, False Ceiling & Certain B/R Works In Bldg No. T-232, Provn Of Misc Works In Esd Lab And Fire Retardant Roof Ceiling On Old Eqpt Room Of Afnet Section Of Eti, Shelter For 100 Kva Dg Set At Eti And Parking Shed At Omq, False Ceiling And Lighting In Saree Shop At Bldg No. P-212, Tiling Work At Smc, Kota Stone At Cook House And Washing Area At P-1076 And Washroom At Fresh Ration Store At Af Stn Jalahalli
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m deep for foundation etc., and getting out in hard/dense soil complete all as specified and as directed. |
| 2 | Returning fillin in, including spreading, leveling,watering and well ramming in layers n exc 25cm complete all as specified and as directed. |
| 3 | Removing excavated material to a distance not exceeding 50m and depositing where directed at a level not exc 1.50m above the starting point all as specified. |
| 4 | M&L PCC 1:4:8 type D-2 (using 40mm graded agg) in foundation, filling and mass concrete complete all as specified and as directed. |
| 5 | M&L RCC type B1 1:2:4, 20 mm graded stone aggregate (nominal mix)as in plinth beam/band etc mixed with with using integral water proofing compound.(WPC shall be measured separately) complete all as specified and as directed. |
| 6 | M&L for TMT bars 8mm dia in stirups cut to length bent to shape required including cranking, hooking ends etc and binding with MS wire not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 7 | Formwork to sides of concrete foundation,footing,based of columns,raft and raft beam,sides and soffits (if any) of foundation and plinth beams,and similar works,vertical or to batter rough finished flate surface of concrete complete all as specified and as directed. |
| 8 | M & L for 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base, pavings, mass concrete all as specified and directed . |
| 9 | M&L for MS Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails nand guides for sliding doors; fixed with angle cleats or other connecting plates as reqd forming holes bolted and welded attchment and curved shaped by welding (thickness of metal n.exxc.6mm) making jointless by filling including cutting of Fe 410- Betc complete all as specified and as directed. |
| 10 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 11 | M&L pre-cast PCC 1:3:6 type C1 (using 20 mm graded stone agg) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6 incl demoliion of Brickwork or stone/ boulder masonry, built in cement mortar all as specified and as directed. |
| 12 | M&L for rendering 15mm thick in cement mortar (1:4) on brick or concrete surfaces of wall and finishing the surface even and smooth without using extra cement complete all specified and directed. |
| 13 | M&L for reinforced cement concrete Type B-1,1:2:4,using 20mm graded aggregate for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc complete all as specified and as directed. |
| 14 | Use & waste for form work of concrete measured flat for soffits of suspended slabs such as roof slabs, and similar work complete all as specified and as directed. |
| 15 | M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 16 | M&L for cement plaster rendering 10mm thick in CM 1:6 on fair faces of brickwork or concrete surface as on wall finished even and smooth without using extra cement and taking down old cement plaster on brick or stone walls, or concrete walls etc., hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises complete all as per specified and directed. |
| 17 | M&L for cement plaster rendering 5mm thick in CM 1:3 on fair faces of brickwork or concrete surface as on ceiling finished even and smooth and including taking down cement plaster on ceilings surface etc., hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises complete all as per specified and directed. |
| 18 | M&L 15mm thick rendering on External fair faces of brick work or concrete surfaces in CM 1:4 mixed with water proofing compound and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.Note : WPC shall be measured & paid seperately. |
| 19 | M&L for supply only liquid water proofing compound of approved make (ISI marked) complete all as specified and as directed. |
| 20 | M&L preparation of plastered surfaces of walls and applying two coats of cement base paint over primer alkali resistance on new surfaces complete all as specified and as directed. |
| 21 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/ loose of soil complete all as specified and as directed. |
| 22 | Excavating in post holes in soft or loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed. |
| 23 | M&L for Cement concrete 1:3:6 type C2 (using 40 mm graded stone agg) as in foundation, filling and for mass concrete all as specified and directed |
| 24 | M&L MS Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 complete all as specified and directed. |
| 25 | S&F Pre painted Coloured Galvalume roofing sheets 0.50 mm thick having Zinc aluminium alloy coating double ribbed trapezoidal profile steel sheet any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified & directed. |
| 26 | S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified incl dismantling of old sheet complete all as specified and directed. |
| 27 | S&F MS Plates Fe 410 -W (Gde- E- 250) quality- A (plain or chequered) channels, square cut or notched (ordinary and counter sunk forming holes, without any attachment complete all as specified and as directed. |
| 28 | M&L Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 29 | M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete all as directed |
| 30 | M & L for 75 mm thick PCC type C1, 1:3:6 (20 mm graded stone aggregate) as in plinth protection/ floor finishing the surface even and smooth with using extra cement all as speecified and as directed. |
| 31 | M&L Vitrified Ceramic tiles 8-10 mm thick, (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including screed bed or bedding layer, 15 mm thick in Cement Mortar (1:6) complete including dismantling of existing old tiles and disposal to outside MD land all as specified and as directed. |
| 32 | M&L Vitrified Ceramic tiles 8-10 mm thick, (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertcal surfaces such as skirting/ dado etc. set and jointed in neat cement slurry and pointed in coloured / white cement to match the tiles inc rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as in backing coat including dismantling of existing old tiles and disposal to outside MD land all as specified and as directed. |
| 33 | Supply and fixing anodised aluminimun size 605 x 605 mm snap grid frame work for false ceiling as per manufacturer instructions, with Hangers 6 mm dia. G.I. (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and including 18mm thick gypsum designer tiles, fixed to sheet suitably placed in false ceiling grid made of aluminium/G.I./ M.S.as per specification and drawing complete all as specified and directed. |
| 34 | Surface excavation n.exc 30cm deep and averaging 24 cm deep and getting out in soft soil complete all as specified and as directed. |
| 35 | M&L for broken stone boulders hard core of guage n.exc 63mm deposited spread and level laid in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 36 | M&L for Sand filling under floors or in foundations including watering and consolidation and all as specified and directed. |
| 37 | M&L for machine pressed pre polished precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade over sand cushion with grey cement and no pigment all as specified and directed. |
| 38 | S&F of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing all as per drawing complete all as specified and as directed. |
| 39 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 40 | S & F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 41 | Supply & Fixing 150 mm Aluminium handles, cast type, anodised complete all as specified and as directed. |
| 42 | S&F Butt hinges, medium weight cold rolled mild steel and fixed 75mm sizecomplete all as specified and as directed. |
| 43 | S & F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 44 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm complete all as specified and directed. |
| 45 | M&L 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work including taking down old complete all as specified and as directed. |
| 46 | Taking down steel window/ventilators shutters area n.exc 1.0 sqm each including all fittings,cutting and grinding the surface attached with iron grill (without taking out grill) and S&F Powder coated aluminium frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws, etc complete all as specified. Make : JINDAL/HINDALCO/INDALCO. Note : (i) Glazing and wire mesh shall be measured and paid separetely.(ii) Item shall be paid as per weight of aluminium section (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arrangement, etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing. |
| 47 | Dismantling aluminium frame work with glass from exsitng structure complete all as specified and directed |
| 48 | Supply and fixing in repairs Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws,included rubber beading complete all as per architectural drawings and as directed. |
| 49 | M&L for powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc (thickness of powder coating not less than 50 micron) complete all as specified. |
| 50 | S&F 5.50 mm thick sheet glass ordinary quality and glazing complete in square n exc 0.50 Sqm in each pane complete all as specified and directed. |
| 51 | S&F 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty/beading in square exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 52 | S &F 3mm thick frosted glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 53 | S&F Aluminium body door closer hydraulically regulated,designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed including taking existing one complete as directed. |
| 54 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 55 | S&F in repair 20-25mm thick SS curtain rail incl brackets fixed into wall using wooden plug, screw etc complete all as specified and directed. |
| 56 | M&L for anodised aluminium snap grid frame work for false ceiling of size of grid 605 x 605mm or as per manufacturer's instruction including necessary scaffolding, notching and prepared holes and including taking down existing false ceiling & frame complete all as specified and as directed |
| 57 | M&L for hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, provision of PVC protected sheeting and its removal after fabrication and supporting hanger comprising of mild steel rod, J bolt with necessary washers, bolts and nuts, for securing frame work to ceiling and to the snap grid complete all as specified and as directed |
| 58 | M&L for providing 10mm thick seamless calcium silicate fire proof ceiling made out of required size board of siliceous and calcareous material reinforced with cellulose fibre, meets fire ratings as per BS 476 Part 5, 6 and 7 class 1 and P, water resistant and thermal insulated, tested as per fire retardant IS 15061-2002 for excellent results, fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish all as per manufacture instruction complete all as specified and as directed. (Frame work for ceiling shall be measured and paid separately) Note: Contractor has to submit fire resistant/retardant certificate of ceilling from the manufacturer alongwith sample approval . |
| 59 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed. |
| 60 | M&L PCC (1:4:8) type D2 using 40mm graded aggregate 75mm thick as in sub base of floor finished even and rough to receive top layer complete all as specified and directed |
| 61 | M&L Machine cut kota stone slab 20-25 mm thick as in flooring, laid over and incl 20 mm thick screed bed in CM 1:3 set and jointed in neat cement slurry and pointed with cement and pigment to match the shade of the slab incl rubbing and polishing complete all as specified and as directed. |
| 62 | M&L polished Sadarahalli granite stone slab flooring 18-20 mm thick with grey cement slurry mixed with pigment to match the shade of the slab including 20mm thick screed bed in cement mortar 1:4 complete incl dismantling old stone slab complete all as specified and as directed. |
| 63 | M&L for 18 to 20mm thick polished sadarahalli granite tiles as in riser and dado of steps over and including10mm thick cement mortar 1:4 incl dismantling old stone slab complete all as specified and as directed. |
| 64 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
| 65 | M & L for preparation of old or treated plastered surface and applying one coat of oil bound distemper (OBD) complete all as specified and directed. |
| 66 | M&L Providing and applying wall care putty of 1mm thickness over plastered surface to prepare the surface even and smooth. |
| 67 | M&L for Preparation of old decorated plastered or unplastered surface of celling, Washing, rubbing down and stopping of distempered and painted surfaces and applying one coat oil bound distemper complete all as specified and as directed. |
| 68 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 69 | S& F Gypsum board 12 mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed. |
| 70 | Taking down cement plaster from old walls and raking out joints, hacking for key,scrubbing down with water built in cement mortar complete all as specified and as directed. |
| 71 | M&L for rendering 15mm thick in cement mortar (1:6) on wall surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 72 | M&L Two coats of acrylic distemper over a coat of primer on newly plastered walls over 1 mm putty, pillasters, cornices, etc., and necessary preparation of surfaces all as specified and as directed. |
| 73 | M&L Two coats of acrylic distemper over a coat of primer on newly plastered ceiling over 1 mm putty, pillasters, cornices, etc., and necessary preparation of surfaces all as specified and as directed. |
| 74 | M&L Two coats of acrylic distemper over a coat of primer on ceiling over 1 mm putty including complete removal of existing treatment and necessary preparation of surfaces all as specified and as directed. |
| 75 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces and all as specified and as directed |
| 76 | M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over 15mm thick screed bed or bedding layer of cement mortar in (1:6) complete all as specified and as directed. |
| 77 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and as directed. |
| 78 | Material and labour for Glazed coloured Ceramic tiles of size 300mm X 600mm and 6-7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in vertical surfaces over 10 mm thick rendering in cement mortar 1:4 finished including dismantling of existing tile and disposal to outside MD land complete all as specified and directed. |
| 79 | Material and labour for Non skid coloured ceramic tiles 7 to 8 mm thick matt finish(square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, laid in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile incl screed bed 15 mm thick in cement mortar (1:6) including dismantling of existing tile and disposal to outside MD land complete all as specified and directed. |
| 80 | M&L Granite 18 to 20mm thick (table rubbed and polished) in steps,Jamps, Pillars, Windows, cills, platforms and like CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with marble shade of Granite over screed bed or bedding layer of mortar 20mm thick for laying floor finishes in cement mortar (1:4) all as specified and as directed. |
| 81 | Supply and fixing 15mm bore galvanized steel water tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors including taking up or down old steel tubing complete all as specified and directed. |
| 82 | Supply and fixing 20 mm bore galvanized steel water tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors including taking up or down old steel tubing complete all as specified and directed. |
| 83 | S & F Bib taps cast copper alloy chromium plated fancy type screwed down screwed for iron pipe or for brass ferrule and fixed for 15 mm bore complete all as specified and as directed. |
| 84 | S&F Angular stop cock, chromium plated valves high pressure screwed both ends iron pipe or for unioins 15mm dia, including taking existing one complete as directed. |
| 85 | S&F 15 mm bore Pillar taps, cast copper alloy fancy type, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified |
| 86 | S& F of 15mm dia concussive push button taps of cast copper alloy, chromium plated screwed for iron pipe and fixed complete all as specified and directed. |
| 87 | Supply and fix vitreous China urinals, Half stall type white (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed. |
| 88 | S&F Urinal spreader of CP any colour for fixing with 15mm dia pipe (minimum wt 60 gms) complete all as specified and directed. |
| 89 | S&F Wash hand basin flat back 550x400mm vitreous china (white) with cantilever CI/Angle iron brackets embedded in concrete block including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, complete all as specified |
| 90 | S&F 10 litre capacity PVC flushing tank, syphonic action type, flushing cistern, low level, white, with inlet, ball valve,pvc flush pipe, float and handle incl brackets and waste pipe complete all as specified and as directed. |
| 91 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 92 | Supplying and laying of 25mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and as directed. |
| 93 | S & F 25 mm dia CPVC gate valve screwed both ends for CPVC pipe of following sizes complete all as specified and as directed. |
| 94 | Supplying and laying of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches or concealed in walls complete all as specified and as directed. |
| 95 | S & F Rotational moulded Polyethylene water storage tank - 1000 liters capacity (cylidrical vertical with threaded top cover) hoisted and fixed in position all as specified in SSR part I including 25mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. |
| 96 | S & F PVC connection 15 mm bore, 450 mm long complete with both ends unions complete all as specified and as directed. |
| 97 | S&F angular stop valves cast copper screwed down high pressure fancy type screwed both ends for pipe or union fixed for 15mm bore complete all as specified and as directed. |
| 98 | S&F CP 2 way bib cock with wall flange fancy type screwed down screwed for iron pipe in repairs 15mm bore complete all as specified and as directed. |
| 99 | S&F vitreous china squatting pan 'Orissa pattern' size 580 x 440mm white with integral foot rests incl connecting to 'P' or 'S' trap and to flush pipe anti syphonage pipe etc complete including provn of lime concerte bedding and making good to floor complete all as specified and as directed. |
| 100 | S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenches bore of pipe 75 mm with PVC clamps and saddles including taking down old existing pipes and dismantling of cast iron/RCC/PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings complete all as specified and as directed |
| 101 | S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenches bore of pipe 110 mm with PVC clamps and saddles including taking down old existing pipes and dismantling of cast iron/RCC/PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings complete all as specified and as directed |
| 102 | S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenches bore of pipe 150 mm with PVC clamps and saddles including taking down and dismantling of old unserviceable cast iron/RCC/PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings complete all as specified and as directed |
| 103 | S & F in repairs PVC (SWR) bends of any radius with access door bore of pipe 75 mm complete all as specified and as directed. |
| 104 | S & F in repairs PVC (SWR) bends of any radius with access door bore of pipe 110 mm complete all as specified and as directed. |
| 105 | S & F in repairs PVC (SWR) bends of any radius with access door bore of pipe 150 mm complete all as specified and as directed. |
| 106 | S & F in repairs PVC (SWR) junction single (single T) equal or unequal with access door bore of pipe 75 mm complete all as specified and as directed. |
| 107 | S & F in repairs PVC (SWR) junction single (single T) equal or unequal with access door bore of pipe 110 mm complete all as specified and as directed. |
| 108 | S & F in repairs 125/ 110 mm bore PVC (SWR) floor trap plain with grating incl jointing with solvent cement complete all as specified and as directed. |
| 109 | S & F 75 mm bore PVC (SWR) floor trap with grating incl jointing with solvent cement complete all as specified and directed. |
| 110 | Supply and fix 75mm dia PVC (SWR) pipe single socket in any length with rubber ring joint fixed to wall or laid in trenches complete all as specified and as directed. |
| 111 | Supply and fix 75 mm dia PVC bend any radius complete all as specified and as directed. |
| 112 | Supply and fix PVC cowl 75 mm dia complete all as specified and as directed. |
| 113 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm screed bed 1:6 incl dismantling any floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed. |
| 114 | M&L coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm back coat of CM 1:4 incl dismantling any floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed. |
| 115 | Supply and fixing Anodized aluminium size 605 x 605 mm snap grid frame work for false ceiling as per manufacturer instructions, with hangers of GI wire of suitable dia (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and 6mm thick Non asbestos fibre cement building boards, fixed to sheet suitably placed in false ceiling grid made of Aluminium/G.I./ M.S.as per specification and drawing and, complete all as specified and directed. |
| 116 | M & L for preparation of old or treated plastered surface and applying one coats of oil bound distemper (OBD) complete all as specified and directed. |
| 117 | Material and labour for Preparation of old decorated plastered or unplastered surface of wall, chajja, balcony, facia etc., brooming down or steel wire brushing down smoke soot, moulds mass, efflorescent, trading, oil, greasy spots and applying one coat of white wash complete all as specified and directed. |
| 118 | Preparation of new plastered surfaces of wall, pillasters, cornices, etc. and applying two coats of acrylic distemper over a coat of primer over 2 mm thick wall care putty complete all as specified and as directed. |
| 119 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 120 | M & L for 75 mm thick PCC 1:2:4 type B-2 (using 40 mm graded crushed stone agg) as in Hard standing etc. with , spike rolling ,or making impression of expanded metal, while the concrete is green including complete all as specified and directed. |
| 121 | Dismantling any floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 122 | Material and labour for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 15 mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finishes complete all as specidied and as directed. |
| 123 | Material and labour for light shade Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.36 sqm but not exceeding 0.42 Sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and including 10mm thick backing coat in cement mortar 1:4 complete all as specidied and as directed. |
| 124 | Material and labour for Sadarahalli Stone (of any type) tiles 18 to 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over & including 20mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 125 | Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) and removing rubbish off from premises & M&L for ceramic coloured tiles of size 350mmx250mm/ 300mm X 450mmx7 to 8 mm thick, on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured / white cement to match the tiles inc rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as in backing coat to receive wall tiles etc complete all as specified and directed. |
| 126 | Excavation in trenches not exceeding 1.50 m wide and not exceeding 1.50 m deep along the existing sewage line carefully for placing taking out and getting out in soft/loose soil complete all as specified and directed. |
| 127 | Providing, cement concrete 1:2:4 type B1 as in surface channel and drains, benching of manholes in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed. |
| 128 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165-complete all as specified and directed. |
| 129 | M & L for precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) setting in CM 1:6 work for landings, cover slabs, manholes, chajjas, water troughs, manger shleves and similar articles with plain faces including demolition of old reinforced cement concrete of any description and in any position complete all as specified and directed. |
| 130 | M&L for precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) setting in CM 1:6 work for landings, cover slabs, manholes, chajjas, water troughs, manger shleves and similar articles with plain faces complete all as specified and directed. |
| 131 | Supply and fix 150mm dia PVC drainage pipe single socket in any length with proper joint fixed laid in trenches complete all as specified and as directed. |
| 132 | M & L for Point wiring with PVC insulated FRLS 1.5 sq mm multi stranded copper conductor cable 1100 Volts grade drawn into and including rigid non metalic PVC conduit/casing caping medium grade not less than 19/20 mm ( ISI marked ) with all fitting and fixing accessories including sunk in pressed steel chromium plated terminal boxes, concealed in wall/surface/roofs/floor/ceiling etc as per site requirement and making & matching the existing surface ) white bakelite sheet cover for mounting switches, Sockets, Fan regulators etc or modular cover plate with frame including sunken boxes suitable to fix modular cover plate with frame, concealed in wall and 1.5 sq mm multi stranded copper conductor FRLS cable as continuous earth wire drawn with wiring and connected to common earth dolly complete all as specified and directed for the following :- Make of wire: Polycab/Plaza/HavellsNote: Blanking plate,Modular cover plate ,Switches, sockets outlets, Light fittngs, fans, bells & regulators shall be measured and paid for separetely). |
| 133 | All as per item No. 132 here in before but for one light point controlled by one way switch. |
| 134 | All as per item No. 132 but for One exhaust point controlled by one switch one way 5/6 Amps |
| 135 | Supply and Fix modular switch 1 way 5/6 Amp,1 module, complete all as specified and directed. Make : Legrand/ Crabtree/ Anchor/Indoasian |
| 136 | Supply & fix ceiling rose, 3 phase/PVC/polycarbonate, isolated body all as specified and as directed. |
| 137 | S & F modular PVC White cover plate with frame, 2 module |
| 138 | S & F modular PVC White cover plate with frame, 3 module |
| 139 | Supply and Fixing 4 feet surface mounted batten type luminaire , lumen output of 2000 lumens, high efficiency long life LED package in integral module with lumen efficacy of >100 lm/w, viewing angle not less than 120° to ensure better uniformity with an operating voltage range from 140V-270V. The luminaire shall have a white extrusion housing with a poly carbonate diffuser to provide uniform light and sleek design with width not more than 22 mm. The luminaire shall have a CRI >80, Color temperature 6500K, THD <10% and PF >0.95,SDCM<5, IP20, IK02, Operating Temperature: -10 TO + 45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-55 HZ. The luminaire shall have flicker content<5% and shall have high and low cut off with auto restart feature.Driver Safety requirement stds: IS 15885-2-13. The luminaire shall be EMI/ EMC compliant and shall have a internal surge protection of 4 KV. The luminaire shall have Class-1 Electrical insulation, Class-B serviceability . The luminaire and driver shall be BIS approved, complete all as specified and directed. Make : Philips/ Bajaj / CG/Havells. |
| 140 | Supply and Fixing 2 feet surface mounted batten type luminaire , lumen output of 1000 lumens, high efficiency long life LED package in integral module with lumen efficacy of >100 lm/w, viewing angle not less than 120° to ensure better uniformity with an operating voltage range from 140V-270V. The luminaire shall have a white extrusion housing with a poly carbonate diffuser to provide uniform light and sleek design with width not more than 22 mm. The luminaire shall have a CRI >80, Color temperature 6500K, THD <10% and PF >0.95,SDCM<5, IP20, IK02, Operating Temperature: -10 TO + 45 DEG.C; Input Supply Voltage Range:140-270 V, Frequency :50-55 HZ. The luminaire shall have flicker content<5% and shall have high and low cut off with auto restart feature.Driver Safety requirement stds: IS 15885-2-13. The luminaire shall be EMI/ EMC compliant and shall have a internal surge protection of 4 KV. The luminaire shall have Class-1 Electrical insulation, Class-B serviceability . The luminaire and driver shall be BIS approved, complete all as specified and directed. Make : Philips/ Bajaj / CG/Havells. |
| 141 | Supply and fixing Exhaust fan 300 mm sweep 230/ 240 volt AC single phase Metal body 1400 RPM including necessary nut, bolts / screws all specified and directed. Make-Havells /bajaj/ Crompton Greaves. |
| 142 | M&L for cutting of hole through stone wall with the help of Core cutting machine including providing, fixing and removing shoring,cleaning,internal plastering and removing surplus hard core,rubbish not exceeding 50 mtrs including fixing of exhaust fan of size 250-450 mm all as specified and as directed. |
| 143 | S&F Sub main wiring with 2 runs of single core, 4 Sqmm PVC insulated, unsheathed, 1100 volts grade multi-stranded, copper conductor cables (FRLS quality) drawn through PVC casing capping / Conduit with fitting/accessories, fixed on roof, walls, ceiling etc including 4.00 Sqmm PVC insulated, unsheathed, single core, multistranded, copper conductor as earth continuity wire complete as specified and directed. (Note : Two runs of cable and one run of earth wire including PVC conduit /Casing capping shall be measured as one run length) Make : Havells, Polycab, Plaza |
| 144 | S&F 35/36 W( WW/WH) LED recess /surface type 2x2 ft luminaire with classic design & glare free soft illumination. housing with white high reflection powder coated (RAL9016) CRCA sheet. Glare free, Opal diffuser for symmetrical light distribution fixed in separate CRCA sheet frame held in with housing by screws for easy maintenance. High efficiency long life LED package in integral module with lumen efficacy of >100 lm/w, viewing angle of 100° to ensure better uniformity. Powered by an independent Isolated, SELF Output electronic LED driver (SMPS based constant current supply) efficiency of 85% with built-in Surge protection 3Kv. System Lumen Output of 3000 lumens. Make : Philips/ Bajaj /CG/Havells. |
| 145 | Note :- An amount of Rs 17,150.00 on account of credit schedule for schedule 'A' part II shall be deducted from the total amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender