Tender For Comprehensive Maintenance To Md Accn Of Offr/Jco/Ors In Old C Area Under Age B&R-Ii,Ge Babina.
Tender Value
49.95 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
14 days left
EMD
99900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jhansi → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance To Md Accn Of Offr/Jco/Ors In Old C Area Under Age B&R-Ii,Ge Babina.
BOQ
| Sl. No. | Item Description |
| 1 | S&F in repair of extruded Aluminum anodised handles 100 mm long, fabricated type, complete all as specified and directed. |
| 2 | S&F in repair of extruded Aluminum anodised handles 150 mm long, fabricated type, complete all as specified and directed. |
| 3 | S&F in repair of Aluminium anodised barrel tower bolts 200 mm long of extruded section, complete all as specified and directed. |
| 4 | S&F in repair of Aluminium anodised barrel tower bolts 150 mm long of extruded section, complete all as specified and directed. |
| 5 | S&F in repair of Aluminium anodised sliding door bolts with hasp and staple (bolt type) and fixing clips of sheets,cast or extruded type 300mm long, plate type, complete all as specified and directed. |
| 6 | S&F in repair of Aluminium anodised 150mm long hasp & staple type, incl bolt to hinge plate and fix with screws complete all as specified and directed. |
| 7 | S&F in repair 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union etc complete all as specified and as directed. |
| 8 | S&F in repair of Aluminium anodised floor door stopper 140 mm with hard drawn steel spring long, complete all as specified and directed. |
| 9 | S&F in repair of Butt hinges, 100 mm size, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 10 | S&F in repair of Butt hinges, 75 mm size, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 11 | S&F in repair of Butt hinges with galvanised MS hinge pin, 100 mm size, aluminium anodised extruded, B-21 type, complete all as specified and directed. |
| 12 | S&F in repair of MS ordinary rat tail rod pattern springs of size 300mm incl roller & roller plate, complete all as specified and directed.Note : Including welding work as required for fixing in steel chowkhats. |
| 13 | S&F in repair of wooden bright polished Cup board knobs, 40mm dia size with nut, screw & washer, complete all as specified and directed. |
| 14 | S&F in repair continuous (piano) hinges, mild steel bright finish in electro galvanized width of flat (when open) in 30mm, complete all as specified and directed. |
| 15 | S&Fin repair for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed. |
| 16 | S & F Peg set of six S.S. fixed to wall with PVC plugs and screw complete. |
| 17 | Hacking out old broken glass (any thickness,any quality or description ) from wooden frames or stone,concrete or brick surrounds,glazed with putty or fixed with beadscomplete all as specified and directed.Note:- (i) Work will be executed up to height of 6 meter for G+1 and no extra payment will be considered for extra height and for temporary scaffolding. |
| 18 | S&F 3mm thick sheet figured glass pin headed type, not exc 0.50 sqm in each pane, complete all as specified and directed.Note:- (i) Putty / Wooden beading included for fixing of glass in wooden /steel window shutter(II) Work will be executed up to height of 6 meter for G+1 and no extra payment will be considered for extra height and for temporary scaffolding. |
| 19 | -ditto as per item No 18 above but in plain glass. |
| 20 | S&F in repair of SS wire cloth 0.36 mm in nominal dia of wire average width of aperture 1.40 mm, and fixed with SS wire staples,complete all as specified and directed. |
| 21 | S&F in repair of 18/19mm thick prelaminated MDF board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws with timber frame work complete all as specified and directed. |
| 22 | S&F 19 mm Cover fillet of external teak wood lipping 6mm thick fixed with nail all as specified and directed. |
| 23 | S&F 25 mm bore SS Pipe curtain rods including SS brackets & SS decorative dome, suitable for door/widows curtain with fancy type SS decorative dooms with ss brackets fitted to each end and fixed to wall with wooden battens incl. removal of existing rod and making good complete all as specified and directed. |
| 24 | S&F in repair of door seal 20 to 25 mm wide fixed to wooden doors with screws, complete all as specified and directed. |
| 25 | M&L , 2nd class hard wood , Plain fillets square, rectangular or triangular in section, exe 6 & n.exe 13 Sq.cm, bull nosed, splayed, chamfered or rounded on one edge, secured with nails or brads, refixed in repair in old position complete all as specified and directed. |
| 26 | M&L , 2nd class hard wood , Plain fillets square, rectangular or triangular in section, exe 13 & n.exe 25 Sq.cm, bull nosed, splayed, chamfered or rounded on one edge, secured with nails or brads, refixed in repair in old position complete all as specified and directed. |
| 27 | M&L for resecuring, without taking down, chowkhats or frames with shutters (without taking off shutters from the frames), area n.exe 1.5 Sqm |
| 28 | M&L for resecuring, without taking down, chowkhats or frames with shutters (without taking off shutters from the frames), area exe 1.5 sq.m and n.sqm 4 sq.m |
| 29 | M&L for 2nd class hard wood Beads, straight (any size) for glazed or gauzed joinery,renewed, including mitres etc.and removing old beads from site complete. |
| 30 | M& L for Resecuring or easing & adjusting without taking down of door/window/cupboard shutter of any description any type not exceeding 1 Sqm each complete all as specified and as directed by Enineer-in-charge |
| 31 | M&L for Resecuring or easing & adjusting without taking down of door/window/cupboard shutter of any description any typeexceeding 1 Sqm and n. exc 2 sqm each complete all as specified and as directed by Enineer-in-charge |
| 32 | M&L for Refixing in the same opening of door/window/cupboard wooden shutter of any description not exceeding 1 Sqm each including easing and adjusting as required complete all as specified and as directed by Enineer-in-charge |
| 33 | All as per item No 32 above but exceeding 1Sqm and not exceeding 2 Sqm |
| 34 | Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exceeding 4 sqm each complete all specified and directed. Note: Including cutting of hole as required at site for taking down and making good of disturbed portion with brick work of CM 1:6 or PCC 1:2:4. |
| 35 | All as per Ser item No 34 above but not exc 1.5 sqm each complete all as specified and directed. |
| 36 | Taking down Shutters of any description not exc 1 sq. m each etc complete all as specified and as directed. |
| 37 | Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each |
| 38 | Material & labour 2nd class hardwood plain, solidstraight chowkhats and frames, wrought, framedrebated on the solid,rounded or chamfered, put together with glue pinned at joints, all as specified and directed. |
| 39 | S&F 125 mm x 60 mm size pressed steel frames locally fabricated for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4type B1 using 20 mm graded stone aggregate complete all as specified and as directed.Note :- 10 mm deformed bar shall be provided in bottom. PCC shall be provided in hollow frame in same rates. |
| 40 | S&F 105 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4type B1 using 20 mm graded stone aggregate complete all as specified and as directed.Note :- 10 mm deformed bar shall be provided in bottom & PCC will be provided in hollow frame in same rate. |
| 41 | S&F 35mm thick 2nd class hard wood Glazed and skeleton shutters (locally fabricated), open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) fitted to chowkhats complete all as specified and as directed by the Engr-in-Charge. |
| 42 | M&L for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 43 | S&F 100mm size mild steel butt hinges medium weight, cold rolled complete all as specified and as directed by Engr-in-Charge. |
| 44 | S&F 100 mm butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and as directed. |
| 45 | S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by the Engr-in-Charge. |
| 46 | S/F 150 mm size Aluminium handles, cast type, anodised and fixed of approved make & ISI marked. |
| 47 | S&F 300 mm long aluminium alloy anodised sliding door bolts with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and as directed by the Engr-in-Charge. |
| 48 | S&F of SS wire cloth 0.36 mm in nominal dia of wire average width of aperture 1.40 mm, and fixed with SS wire staples,complete all as specified and directed. |
| 49 | S&F 30mm thick 2nd class hard wood locally fabricated glazed and skelton window or ventilator shutter open rebated and prepared to receive glass, gauge etc divided into square with plain, chamfered or rounded, mitred beads for securing glass/gauge complete all as specified in SSR Part-I para 8.24 (b). |
| 50 | S&F of Butt hinges, 75 mm size, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 51 | S&F of Aluminium anodised barrel tower bolts 100 mm long of extruded section, complete all as specified and directed. |
| 52 | S&F of extruded Aluminum anodised handles 100 mm long, fabricated type, complete all as specified and directed. |
| 53 | M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 54 | M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator (adequate track) without sash, aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware ie. handles, barrel tower bolts, hinges etc, powder coated aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately. |
| 55 | M&L for powder coated (minimum thickness of powder coating 50 micron) aluminium glazed window shutters (side hung type) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and as directed. |
| 56 | S&F 4.00 mm thick tinted glass of selected quality in square not exceeding 0.5 sqm in each pane, fixed to aluminum frame with and including suitable rubber beading complete all as specified and directed |
| 57 | S&F 4.00 mm thick tinted glass of selected quality in square exceeding 0.5 sqm in each pane, fixed to aluminum frame with and including suitable rubber beading complete all as specified and directed |
| 58 | S&F framed work such as grills, grating, etc, with ends of bars shouldered and or riveted, or froged in to spikes framed guard bars, barred iron doors, ladders, or similar work confirming to Fe 290 Gde-E-165. |
| 59 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing |
| 60 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. |
| 61 | S&F in repair of Ball valves, 20mm dia, high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 62 | S&F in repair of Ball valves, 25mm dia, high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 63 | S&F in repair of PTMT waste coupling, 32mm dia, half or full thread, complete all as specified and directed. |
| 64 | S&F in repair of PTMT waste kitchen sink coupling, 100 mm dia with waste pipe, complete all as specified and directed |
| 65 | S&F in repair of PVC waste pipe 900mm long, 32mm dia size, complete all as specified and directed. |
| 66 | S&F in repair of PVC connection 450 x 15mm dia, PTMT nuts at both end, complete all as specified and directed. |
| 67 | S&F in repair of PVC seat cover, suitable for existing EWC, complete all as specified and directed. |
| 68 | S&F in repair of Brass Spindle for bib taps/pillar taps/angle cock 15 mm, complete all as specified and directed. |
| 69 | Taking up or down existing steel tubing 15 mm bore and including connections etc complete all as specified and as directed. |
| 70 | Taking up or down existing steel tubing 20 mm bore and including connections etc complete and as directed. |
| 71 | Taking up or down existing steel tubing 25 mm bore and including connections etc complete and as directed. |
| 72 | Supply and fixing, jointing and testing galvanised iron tubing 15 mm bore medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor etc complete all as specified and directed. |
| 73 | Supply and fixing, jointing and testing galvanised iron tubing 20 mm bore medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor etc complete all as specified and directed. |
| 74 | Supply and fixing, jointing and testing galvanised iron tubing 25 mm bore medium grade with all fittings such as bends, elbows sockets, reduces etc and fixed to wall, ceiling or laid in floor etc complete all as specified and directed. |
| 75 | S&F of 20mm outer dia CPVC pipes SDR 11 & CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 76 | S&F of 25mm outer dia CPVC pipes SDR 11 & CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 77 | S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed |
| 78 | S&F in repair PVC (SWR) 110mm pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 79 | S&F in repair PVC (SWR) 110mm pipes single socketed in any length with rubber ring joints fixed to walls, including hold fast for fixing of pipe in wall complete all as specified and directed. |
| 80 | S&F 75 in repairs mm dia PVC(SWR) type B pipes single socketed, in any length with rubber ring joints,fixed laid in trenches or in floor complete all as specified and as directed by engineer in charge . |
| 81 | S&F 75 in repairs mm dia PVC(SWR) type B pipes single socketed, in any length with rubber ring joints,fixed in Wall complete all as specified and as directed by engineer in charge . |
| 82 | S&F of PVC(SWR) Bend any radius suitable for 110 mm Pipe, complete all as specified and directed. |
| 83 | S&F 110mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 84 | S&F 110mm PVC (SWR) branch piece, single (double Y)) equal or unequal complete all as specified and directed. |
| 85 | S&F 110mm PVC (SWR) reducers complete all as specified and directed. |
| 86 | S&F 110mm PVC (SWR) vent cowl complete all as specified and directed. |
| 87 | S&F of PVC(SWR) Bend any radius suitable for 75 mm Pipe, complete all as specified and directed. |
| 88 | M&L PVC (SWR) floor trap 75 mm dia plain with grating including jointing with solvent cement etc complete all as specified and as directed. |
| 89 | Repair and mending of leakage in 15mm bib tap, pillar tap, stop cock, angle stop cock etc of any description including replacement of internal fitting of requisite pattern and size etc. complete all as specified and as directed. |
| 90 | S&F in repairs small galvanised iron fittings (ISI Marked) such as socket, elbow, nipple, tee, union etc for 20mm bore pipe or 15x20mm reducers etc complete all as specified and as directed. |
| 91 | S&F in repairs flush pipe of polyethylene with rubber cone for low level flushing cistern including jointing to WC complete all as specified and as directed. |
| 92 | S&F in repairs internal fitting (PVC syphon kit) with handle complete for low level PVC flushing cistern etc complete all as specified and as directed. |
| 93 | M&L for Opening of air lock/ blockage in GI pipe line from service water tank to internal GI pipes/ fittings for smooth flow of water to bib taps/ showers/ pillar tap/ stop valves complete by application of pressure pump/ gravity pressure etc complete all as specified and as directed. |
| 94 | Attending plumber complaints and rectifying defects such as leakage from flushing cistern down pipe, flush handle, PVC connection, stop valves, leakage of taps, mixer, mixer, stop cocks, leakage in GI pipe line fittings, water tanks/over flow from inlet & outlets and repair in portion including providing all type of washers, and minor accessories (upto 2 No. items in each bldg.) |
| 95 | Attending carpenter complaints such as tightening of loose door/ window/ cup board hinges, re-fixing of loose sliding bolts/ tower bolts/ handles, resecuring of loose pelmet & curtain rods/ brackets and repairing in position including providing all type of screws, nails and necessary minor accessories (upto 5 No. items in each bldg.) |
| 96 | S&F in repair of CP bib cock, 15 mm dia with wall flange made of cast copper alloy, chromium plated, fancy type complete all as specified and directed. |
| 97 | S&F in repair of CP Pillar cock, 15 mm dia with flange made of cast copper alloy fancy type, complete all as specified and directed. |
| 98 | S&F in repair of CP fancy type stop cock (concealed type) , 15 mm dia with flange made of cast copper alloy, complete all as specified and directed. |
| 99 | S&F in repair 15 mm bore angle cock long thread fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete. |
| 100 | S&F in repair of CP two way angle cock, 15 mm dia with wall flange, ISI Marked, complete all as specified and directed. |
| 101 | S&F in repair of CP two way bib cock & angle cock, 15 mm dia with wall flange, ISI Marked, complete all as specified and directed. |
| 102 | S&F in repair of CP wash basin mixer 15 mm dia with flange made of cast copper alloy, complete all as specified and directed. |
| 103 | S&F in repair of CP wall mixer, incl provn for shower connection, 15 mm dia with flange made of cast copper alloy, complete all as specified and directed. |
| 104 | S&F in repair of CP sink mixer swan neck type, for kitchen 15 mm dia with flange made of cast copper alloy, complete all as specified and directed. |
| 105 | S&F in repair of CP health faucet with 8 mm dia, 1.5 mtr long flexible tube & wall hook, made of cast copper alloy, complete all as specified and directed. |
| 106 | S&F in repairs chromium plated tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed by Engineer-in-Charge. |
| 107 | S&F in repair 8-10mm thick CP corner glass shelf with bracket fixed with screws complete all as specified and as directed by Engineer-in-Charge . |
| 108 | S&F in repair 600mm x450mm looking mirror 5mm thick of selected quality glass, mounted on 6mm thick commercial ply wood and fixed to wooden plugs with chromium plated brass and cup washer complete all as directed |
| 109 | S&F in repair PVC bathroom cabinet with mirror of size 432mmx311mm complete all as specified and as directed. |
| 110 | S&F in repair of SS grating of 125 mm dia size, complete all as specified and directed. |
| 111 | S&F in repair of SS grating of 125 mm dia size with hole for waste pipe, complete all as specified and directed. |
| 112 | S&F in repair of Gun-metal gate valve with iron wheel, screwed both ends, 20 mm bore size, complete all as specified and directed. |
| 113 | S&F in repair vitreous china wash hand basin, white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets 32mm dia brass waste coupling and including fixing of tap waste fitting and union complete all as specified and as directed . |
| 114 | S&F in repair vitreous china squatting pan orissa pattern of size 580x440mm white with integral foot rest and including connection to trap and to flushing pipe, anti syphonage pipe etc. complete including making good to floor. |
| 115 | Supply & Fix in repairs Vitreous China wash down water closet pan (pedestal pattern), EWC, coloured including jet system & matching coloured seat cover fixed complete all as specified and directed. |
| 116 | Running welding in repairs not exc 6mm thickness of metal to be welded complete all as specified and directed. |
| 117 | Welding in repairs n. exc 2.5cm in length n exc 6mm thickness of metal to be welded complete all as specified and directed. |
| 118 | Dismantling floor hearth wall tiling including cement mortar bedding but not backing removing serviceable meterial to store. |
| 119 | M/L 25mm thk PCC 1:2:4 type B-0 using 12.5 mm graded agg as in flooring finished fair and even without using extra cement. |
| 120 | M&L for glazed coloured ceramic tiles 300x450x8mm/300 x 600 x 8 mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match the existing wall surfaces, over and incl 10mm thick rendering in cement mortar 1:4 etc complete. |
| 121 | M&L non skid ceramic coloured tiles 7 to 8 mm thick ( square or rectangular ) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm over 15mm thick screed bed or bedding layer in cement mortar 1:6 in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 122 | M&L for 18-20mm thick granite of any type in full length for kitchen plate form, machine cut bedded and jointed with grey cement sluury and pointed with white cement with admixture of pigment to match the shade over 15 mm thick screed bed (1:6) including grinding and polishing complete all as directed. |
| 123 | Demolition of PCC in ground floor or paving n.exc 15 cm thick above or below ground level complete all as specified and as directed. |
| 124 | M&L PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection, of 75 mm thick finished fair and even, using extra cement complete all as specified and as directed |
| 125 | S&F in repair for aluminium (Extruded section) body door closer, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 60 to 80 kg complete all as specified and as directed. |
| 126 | Taking down old existing unserviceable HDPE water storage tank(PVC/RCC and of capacity n exc 500 ltrs etc complete as directed |
| 127 | Taking down old existing unserviceable HDPE water storage tank (PVC/RCC) and of capacity exc 500 ltrs but n exc 1000 ltrs complete as directed |
| 128 | S & F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, triplr layer in construction white in colour hoisted and fixed in position complete all as specified and directed. |
| 129 | S & F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, triplr layer in construction white in colour hoisted and fixed in positioncomplete all as specified and directed. |
| 130 | Cleaning & removing all scale & dirt, etc. from 500 litres tankS&Form mouths of circulating pipes, etc. |
| 131 | Cleaning & removing all scale & dirt, etc. from 1000 litres tankS&Form mouths of circulating pipes, etc. |
| 132 | Demolition of PCC in exc 15 cm thickness but above ground floors in sunken floor of toilet/bathrom/kitchen complete, all as directed and as specified. |
| 133 | M&L rendering 10 mm thick in CM 1:3 on fair faces of brick/concrete surfaces of sunken floors including WPC finished even and smooth with out using extra cement complete. |
| 134 | M&L for applying two coats of spray/brush applied of Smart Care Ultron Liquid membrane of Asian pant Ltd or equivalent as approved by GE in proportions as per manufacturer instruction complete on surfaces floor and wall of sunken portion complete all as specified and directed. |
| 135 | M&L for PCC (1:5:10) type E2 using 40 mm graded stone aggregate as in filling and mass concrete complete all as directed and as specified. |
| 136 | M&L for cement concrete 1:2:4 type B1 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, copings, bond stones, bed plates for hold fast and the like including weathering, slightly rounded or chamfered angles and throating, , complete all as specified and directed. |
| 137 | S&F in repair for stainless steel kitchen plate rack 900mm x 600mm x 250mm size including fixing arrangement to walls with rawel plug or wooden plugs complete all as specified and directed. |
| 138 | S&F in repairs sink with drainage board made up of stainless steel 1mm thick for kitchen or laboratory with plug washers and waste fittings including bedding in CM 1:3 into dwarf wall or cantilever brackets and connecting union to pipe over all size 915mm x 460mm, bowl size 410 x 330 x 160mm etc complete all as specified and as directed by Engineer-in-Charge |
| 139 | S&F in repair of SS dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 140 | Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc. |
| 141 | M&L rendering/screeding 15mm thick cment mortar 1:6 on fbrick or concrete surface of wall rendering is to be finished even smooth with out using extra cement complete all as specified and as directed |
| 142 | Materials and labour for preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over one coat of putty complete. |
| 143 | Materials and labour for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer over one coat of putty complete. |
| 144 | Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed by the Engr-in-Charge. |
| 145 | Material and labour for prepration old or untreated surfaces of wood or wood based surfaces and applying one coat of synthetic enamel paint over a prime coat of pink primer on surfaces of any desription, not otherwise described, over 10 cm width or girth complete all as specified and directed by Engineer -in-Charge. |
| 146 | M&L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer on surfaces of any description over 10cm width or girth on new steel surfaces including preparation of surfaces complete all as specified and directed |
| 147 | Material and labour for preparation of old steel surface and applying one coat of synthetic enamel paint on steel or iron surfaces of any decription, over 10 cm in width or grith, not othewise described including preparation of old steel surfaces and over a coat of red oxide complete all as specified and directed by Engineer -in-Charge. |
| 148 | S&F in repair cast copper alloy chromium plated jet spray for EWC complete all as specified and as directed. |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender