Tender For Provn Of 02 X High Mast Light Near Wksp Floor Area & Provn Of Mt Parking Shed With Hardstanding Near Bldg No T-208 At Old Cantt Under Ge Gangtok
Tender Value
44 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
18 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sikkim → Sikkim
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of 02 X High Mast Light Near Wksp Floor Area & Provn Of Mt Parking Shed With Hardstanding Near Bldg No T-208 At Old Cantt Under Ge Gangtok
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and as directed. |
| 2 | Rough excavation not exceeding 1.5m deep and getting out soft / loose soil completed all as specified & directed. |
| 3 | Excavating over areas n exc 1.5m deep and for foundation etc and getting out in soft / loose soil completed all as specified & directed. |
| 4 | Excavation in trenches, n exc. 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft / loose soil etc complete all as specified and directed. |
| 5 | Returning filling in, including, spreading, levelling, watering and well ramming in layers n.exc 25cm in soft / loose soil complete all as specified and as directed. |
| 6 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, Returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil completed all as specified & directed. |
| 7 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point for soil completed all as specified & directed. |
| 8 | M&L for Hand packing of broken stone or boulder (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level complete all as specified and directed. |
| 9 | M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface using broken stone boulders completed all as specified and as directed. |
| 10 | M&L for PCC type C2 1:3:6 using 40 mm graded stone aggregates on in foundation, filling and mass concrete complete all as specified and as directed. |
| 11 | M&L for Plain cement concrete 1:3:6, type C-2 as in Plum concrete in retaining walls etc including plums of stone boulders (Basalt, trap or any other approved) of size 200 to 300mm complete all as specified in Ref TD Drg No SZ/TD/332/2015 Sheet No 1/1 and as directed.Note: - Boulders will be measured & paid in seperate item as Supply only. |
| 12 | Supply only Boulders exceeding 20 cm and upto 30cm dia (Basalt, trap or any other approved) of size 200 to 300 mm complete all as specified and as directed. |
| 13 | M&L for Providing, cement concrete Type C1 1:3:6 (20mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs complete all as specified and as directed. |
| 14 | M&L RCC M25 (design mix) using 20 mm graded stone aggregate as in RCC Band etc complete all as specified and as directed. |
| 15 | Use and waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc all as specified and as directed. |
| 16 | Use and waste Formwork to flat & rough finished faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter etc complete all as specified and directed. |
| 17 | M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 18 | M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 19 | M&L for mild steel rolled sections conforming to Fe - 410 (Gde E-250) as in main and cross beams, hip and jack rafters; purlins where connected to common rafter and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including truss completed as specified and directed. |
| 20 | M&L for preparation of new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete as specified and directed. |
| 21 | M&L for 150mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub-base of floor etc. Complete all as specified and as directed by the Engr-in-Charge. |
| 22 | M&L for 100 mm thick PCC type C2 1:2:4 type B2 (using 40mm graded stone aggregate) as in plinth protection/Path/hardstanding completed all as specified and as directed by the Engr-in-Charge. |
| 23 | S&F 75mm bore PVC pipe (SWR) single socketed, in any length with rubber ring joints, as in weep holes.etc complete all as specified and directed. |
| 24 | M&L for TMT bars 10 mm dia and over, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed. |
| 25 | M&L for TMT bars 6 to 10 mm dia in stirrups, spacers and binders, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed. |
| 26 | M&L for point wiring with 1.5 Sqmm PVC insulated unsheathed single core stranded copper conductor (FRLSH) Cable of working voltage 1100 Volts grade conforming to IS-694 pt-I & II of 2000 drawn in and including 25 mm size PVC rigid non matellic casing caping (Double lock) with all casing capping fittings & accessories with PVC Box backelite sheet fixed with brass screws & cup washers including 1.5 sqmm PVC insulated unsheathed single core stranded copper conductor (FRLSH) cable as earth continuity conductor connected to main switch / DB's or common earth dolly complete for for light point/ fan point/ exhaust fan point/ call bell point/ controlled by one switch 5/6 Amp one way complete all as specified and directed. |
| 27 | All as per Item No.26 here in above but for One 2/3 pin socket outlet 5/6Amps on independent board |
| 28 | All as per Item No.26 here in above but for one switch socket combination 15/16 Amps on independent board with cable 2.5 sq mm size and earth wire 2.5 sqmm |
| 29 | S&F switch piano, flush type, 5 amps, 230 volts, single pole, one way (ISI marked) complete all as specified and directed. |
| 30 | S&F Switch socket combination, 2 and 3 pin, 5/6 amps, multipurpose, flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish complete all as specified and directed. |
| 31 | S&F Switch socket combination, 2 in 1, 6 pin, 5/6 Amps and 15/16 Amps, multipurpose , flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish complete all as specified and directed. |
| 32 | S&F Ceiling rose, PVC/polycarbonate insulated body, 3 terminal and 240 volts, ISI marked complete all as specified and directedMake : Anchor Product Code No 39040 or equivalent of approved make |
| 33 | S&F in sheet metal enclosure for 8 way Distribution Boards (DB’s), single pole and neutral double door with IP-43 protection suitable for fixing MCB's/lsolators complete all as specified and as directed. |
| 34 | S&F MCB Triple pole & neutral 6 to32 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as specified and as directed. |
| 35 | S&F MCB single pole 6 to 32 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as specified and as directed. |
| 36 | S&F Air termination, single pointed, copper rod 12mm dia and 300mm long complete with all fittings, jointed tested and commissioned complete all as specified and directed. |
| 37 | S&F Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw |
| 38 | S&F Galvanised iron strip 25 x 3.15 mm complete with all fittings fixing on wall, jointed tested and commissioned complete all as specified and directed. |
| 39 | M&L for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'Medium grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continious earth wire on pole, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 1991 print and as directed . |
| 40 | M&L for Earthing complete with galvanized iron earth plate 600x600x6mm size buried in ground vertically at a depth not less than 2.25mtr below ground level with the top edge of earth plate at a depth not less than 1.50 metre below ground level connected to galvanized steel strip 25x5mm as earth lead by means of bolts, nuts, check nuts and washers of galvanized steel, earth plate electrode surrounded by a packed thickness of char coal of coke dust mixed with common salt in alternate layers not exc 150mm thick, aluminium strip protectected with and including galvanized iron pipe 40mm bore (dia) light grade, upto 1.0 metre for GI strip protection above the floor level of the building where it is connected and 20mm dia GI pipe light grade with CI funnel on top upto ground level for watering purpose incl necessary excavation in soft/loose soil, returning, filling in and removal of surplus spoil upto a distance of 50.00 mtr and all as shown in electrical plate No. 3 of MES Schedule Part-I and testing on completion including earth pit and cover all specified. |
| 41 | Supply, Laying, jointing & testing in trenches/through pipes/ducts or on poles/walls jointing to O/H conductor, LT panels, main switch with cable size aluminum lugs and testing. XLPE insulated, armoured heavy duty electric cables with aluminum conductor, 1100 volt grade, all as specified directed by Engineer in charge of cross sectional area of 16 Sqmm 4 core |
| 42 | Supply and lay cable XLPE Insulated screened Meter PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sqmm x 3.5 core all as specified. Please Enable Macros to View BoQ information |
| 43 | Supply and lay cable XLPE Insulated screened Meter PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sqmm x 3.5 core all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender