Tender For special Repair To Administrative Bldg No. 23, 23/1, 2, 3, 23/B And Record Office Of Hq Cesc Office Complex In The Aor Of Age B/R (Central) Under Ge (North) Pune.
Tender Value
1.44 Crore
Estimated cost
Bid Submission
29 Jul 2026
19 days left
EMD
2.20 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Administrative Bldg No. 23, 23/1, 2, 3, 23/B And Record Office Of Hq Cesc Office Complex In The Aor Of Age B/R (Central) Under Ge (North) Pune.
BOQ
| Sl. No. | Item Description |
| 1 | B&R PORTIONDismantling Single layer Mangalore Pattern or similar tiles in roofing and rubbish off the premises complete all as specified and directed. |
| 2 | Dismantling tile battens, spaced at spacing exc 15cm centres to centres fixed with nails complete all as specified and as directed. |
| 3 | Dismantling structual steel work including doors, gates, rolling shutter, weldmess but excluding framed trusses etc. complete all as specified and directed. |
| 4 | S & F of mild steel work as in Roof battens, rafters etc and similar work complete using ERW or induction butt welded tubes conforming to IS1161-1998 grade ST-240, complete all as specified and directed. |
| 5 | S & F Rolled steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of Fe-290 ( Gde E165 ) complete all as specified and directed. |
| 6 | M&L for mild steel framed work such as grill, gate etc with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed. |
| 7 | M&L for preparation of New steel surfaces of any description over 10cm girth or width and applying Two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 8 | Dismantling plain or corrugated steel sheeting, any gauge or any thickness, as in roof coverings complete all as specified and directed. |
| 9 | Supply and fix 0.60mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws & aluminium washers, in roofs, walls etc with grade of zinc coating 120gms/ Sqm complete all as specified and as directed. |
| 10 | Supply and fix in repairs 0.56 mm thick Aluminium corrugated sheeting Alloy 31000 H4, STUCCO mbossed finish with two corrugations side lap fixed with coach screw and Aluminium washer in roof and wall etc. with end laps stitched with 25x6mm G.I. bolts at 20cm apart complete all as specified and as directed. |
| 11 | Dismantling of wall/ceiling board of any description and any thickness including cover fillets etc complete all as specified and directed. |
| 12 | M&L for 7-8 mm thick PVC prelaminated Gypsum board false ceiling board on and including GI powder coated grid work of size 595 mm x 595 mm with using 32.0 mm x 20 mm x 1.5 mm thick main tee, 23.5 mm x 23.5 mm x 1.28 mm cross tee and 25 mm x 25 mm x 1.5 mm angle fixed to wall for false ceiling including necessary supporting hanger with 2.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, size of grid shall be 600 mm x 600 mm complete all as specified and as directed. |
| 13 | M&L for 10mm thick Gymsum board (mositure resistant) seamless as in the ceiling/ linning fixed with counter sunk screws on and incl GI channels frame work of stardard section as per manufacture,s instructions, fixed @ 1.2 m in one direction and 45 cm in center to center in other direction with necessary fixing arrangmentat their junction point at desired heights below roof slab and incl two coats of plastic emulsion paint over a coat of primer on exposed surfaces. (The frame work shall be fixed with the help of GI suspenders of suitable size with the help of dash fasteners and along wall, making good disturbed surfaces, smoothening the gypsum board, POP lining at joints as required) including dismantling of existing board complete all as specified and directed. |
| 14 | M&L in repairs for POP cornices of approved size and shape for seamles false ceiling incl necessary hanging arrangments atc complete all as specified and directed. |
| 15 | M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in roof kerbs or mud stops rounded or chamfered on edges and as in Coping and similar work complete all as specified and directed. |
| 16 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded, pointed in any mortar rubbish off the premises to low land area of outside MoD land complete all as specified and directed. |
| 17 | M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base including demolition of existing PCC and removing rubbish off the premises exceeding 200m m but not exc. 500 m and depositing out of MoD Land complete all as specified and directed. |
| 18 | M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding exc 0.18 sqm but not exc 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding in CM 1:4 mixing with water proofing compound (as approved by GE) @ 10% by wt of cement complete all as specified.(Note:- WPC measured and paid seperately) |
| 19 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 20 | M&L for glazed ceramic coloured tiles of size 600 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.NOTE : Shade/ colour to be approved by Garrison Engineer in consultation with user. |
| 21 | M&L for double charged vitrified colour ceramic light shade tiles 8 to 10 mm thick, area of each tiles exc 0.18 sqm but not exc 0.36 sqm in floors set & jointed in neat cement slurry & pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.NOTE : Shade/ colour to be approved by Garrison Engineer in consultation with user. |
| 22 | All as per ser. item No- 21.00 above but on vertical surfaces of skirting or dado etc incl 10mm thick backing coat of cement plaster in CM 1:3 complete all as specified and directed.NOTE : Shade/ colour to be approved by Garrison Engineer in consultation with user. |
| 23 | M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite over and including 10mm thick backing coat of cement plaster in CM 1:3 including dismantling existing old stone slab and tiles of any description or thickness laid bedded complete all as specified.and directed. |
| 24 | M&L for Green marble 18-20mm thick (of any type), (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform,WHB plateform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 25 | M&L for Providing edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finishomplete all as specified and directed. |
| 26 | M&L for Providing edge moulding to 18-20mm thick marble stone of counters vanities etc. including machine polishing to edge to give high gloss finish complete all as specified and directed. |
| 27 | M&L for Machine cut cuddappah stone slab 20 to 22mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including dismantling of existing stone slabs / tiles of any description or thickness laid bedded and pointed in cement mortar removing rubbish off the premises complete all as specified and as directed. |
| 28 | S&F 15mm bore GI tubing medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing complete all as specified and directed. |
| 29 | S&F 20mm bore GI tubing medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing complete all as specified and directed. |
| 30 | M&L for cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting not exc. 10cm girth complete all as specified and directed. |
| 31 | S&F in repairs Vitreous China wash down water closet pan (pedestel pattern) EWC white, including trap connection to drain (outgoing pipe) and to flushing pipe, PVC connections 15mm size with PTMT nuts of length 600mm, antisyphonage pipe and plastic water closet seat of white in colour, back closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed. |
| 32 | S&F in repairs vitreous china coloured wash down water closet (pedestal / wall mounted Type) cascade type ‘P’ trap or 'S' Trap, in built seat cover and flushing cistern, low level, valveless, symphonic action type complete with inlet ball valve, float and handle complete all as specified and as directed.(NOTE : Sample / make wash down water closet shall be got approved by contractor from GE prior placing bulk order.) |
| 33 | S&F in repairs vitreous China squatting pan ‘Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern) including connection to trap and to flushing pipe, anti-syphonage pipe etc& making good to floor, trap set in concrete complete all as specified and as directed.(NOTE : Sample / make shall be got approved by contractor from GE prior placing bulk order.) |
| 34 | S&F in repair dual flush 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and directed.(NOTE : Sample / make of dual flush shall be got approved by contractor from GE prior placing bulk order.) |
| 35 | S&F in repairs vitreous china wash hand basin white of bowl size 550 x 400mm incl CP brass waste coupling and PVC waste pipe, 32mm dia, fixed with fasteners and incl M S brackets complete all as specified and directed. |
| 36 | S&F in repairs vitreous china counter Top wash hand basin, Ivory, size 560 mm x 470 mm x 190mm flat back excluding taps but including CI brackets, chromium plated brass waste coupling, chain and plug, waste fitting including waste pipe, union and PVC waste pipe 32mm dia, of required length, cutting for and pinning in ends of bracket or errecting stand complete all as specified and as directed. (NOTE : Sample / make of WHB shall be got approved by contractor from GE prior placing bulk order.) |
| 37 | S&F in repairs SS rectangular/ square flat cut grating jali with cockroach trap, inner & outer filter, frame type of grade SS 304 with / without hole complete all as specified and directed. |
| 38 | S&F in repair 600mmx450mm beveled edge looking mirror of selected quality glass of thickness not less than 5.50mm, itched desined corners, fixed to wall with 12mm dia spacers at each corners, complete all as specified and directed. |
| 39 | S&F in repair bevelled edge looking mirror of any size of selected quality glass of thickness not less than 5 mm, fixed to wall with SS studs complete all as specified and directed. |
| 40 | S&F in repair 32 mm Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/40mm-270 gms) complete all as specified and as directed. |
| 41 | S&F in repair Vitreous china Urinal, Full stall type, white with waste pipe and 15mm bore CP brass spreader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe including brass CP urinal spreader for fixing with 15 mm dia pipe complete all as specified and as directed. |
| 42 | S&F in repair 450mm long PVC connection 15mm bore size with PTMT check nuts and washers complete all as specified and directed. |
| 43 | S&F in repairs Hand shower (Health faucet) (ABS Body) with 8mm dia, 1.0mtr long spirochrome flex tube & wall hook suitable for 15 mm dia pipe including making connections and fixed in position complete all as specified and directed. (NOTE : Sample / make of Hand shower shall be got approved by contractor from GE prior placing bulk order.) |
| 44 | S&F in repairs 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified. (NOTE : Sample / make shall be got approved by contractor from GE prior placing bulk order.) |
| 45 | S&F in repair 15mm bore chromium plated angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.(NOTE : Sample / make of CP angle cock shall be got approved by contractor from GE prior placing bulk order.) |
| 46 | S & F in repair brass Chromium plated soap dish holder , fixed to wall with CP brass screws, all as specified and directed. (NOTE : Sample / make of CP Soap Dish shall be got approved by contractor from GE prior placing bulk order.) |
| 47 | S&F in repair Brass Chromium plated towel rail as specified and directed. (NOTE : Sample / make of CP Towel rail shall be got approved by contractor from GE prior placing bulk order.) |
| 48 | S&F in repair Brass Chromium plated towel ring all as specified and directed. (NOTE : Sample / make of CP towel ring shall be got approved by contractor from GE prior placing bulk order.) |
| 49 | S&F in repair of glass shelf of size 600mm long with chomium plated railing fixed with and including chromium plated bracket complete all as specified and directed.(NOTE : Sample / make of glass shelf shall be got approved by contractor from GE prior placing bulk order.) |
| 50 | S&F in repairs Two Way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified and directed. (NOTE : Sample / make of fancy type two way bib tap shall be got approved by contractor from GE prior placing bulk order.) |
| 51 | S & F in repairs long body 'U' shaped sink taps cast copper alloy with chromium plated fancy type screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed bore of pipe 15mm in kitchen sink or counter sink or basin complete all as specified and directed.(NOTE : Sample / make of CP Sink tap shall be got approved by contractor from GE prior placing bulk order.) |
| 52 | S&F in repair Toilet paper holder of stainless steel, all as specified and directed. (NOTE : Sample / make of SS Toilet Paper holder shall be got approved by contractor from GE prior placing bulk order.) |
| 53 | S&F in repair 15mm size with PTMT nuts of lenggth 450mm screwed both ends for iron pipe or for unions and fixed screwed down complete all as specified. |
| 54 | S&F in repair 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate complete all as specified. |
| 55 | S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 56 | S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 57 | S&F in repairs PVC (SWR) bends of any radius of 110mm bore complete all as specified and directed. |
| 58 | S&F in repairs PVC (SWR) bends of any radius of 75mm bore complete all as specified and directed. |
| 59 | S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified and directed. |
| 60 | S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as specified and directed. |
| 61 | S&F PVC (SWR) vent cowl of size 110mm bore complete all as specified and directed. |
| 62 | S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc (minimum thickness of powder coating 50 micron) complete all as specified and directed. |
| 63 | S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos.), suitable handle (1 No.) (minimum thickness of powder coating 50 micron) complete all as specified.(NOTE : Glass and wire mesh shall measured and paid seperately under relevant items) |
| 64 | S&F 4mm thick sheet glass, ordinary quality including glazing with oil putty/rubber beading for door/windows / partions complete all as specified and directed. |
| 65 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified. |
| 66 | Taking down chowkats or frames not exc. 1.5 sqm each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed. |
| 67 | Taking down chowkats or frames exc. 1.5 sqm but not exc 4 sqm each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed. |
| 68 | Taking down shutter of size exc. 2 sqm each complete and refxing again in same opening after complete all as specified and directed |
| 69 | Taking down the shutter of size exc 1.00 sqm but not exc 2.00 sqm each complete all as specified and directed. |
| 70 | Taking down shutter of size not exc 1.00 sqm each complete all as specified and directed. |
| 71 | S&F Factory made 100 % solid wood plastic composite (WPC) door frame, single rebate 45 x 70 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE : During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile, floor tile etc and as per site requirement. |
| 72 | S&F Factory made 100 % solid wood plastic composite (WPC) door frame, double rebate 50 mm x 100 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed. NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile, floor tile etc and as per site requirement. |
| 73 | S&F Factory made solid panel PVC both side Prelam PVC sheet door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a VC sheet strip of 20mm width stuck inside with solvent cement for stiles and lain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing all as specified and directed. |
| 74 | S&F for 30 mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters complete all as specified and directed. |
| 75 | S&F second class hard wood 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats |
| 76 | S&F mild steel butt hinges 100mm long, medium weight, ISI marked complete all as specified and directed.(NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm) |
| 77 | S&F for 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 78 | S&F of 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed ISI marked fixed with Self Tapping screws complete all as specifed and directed. |
| 79 | S&F of 125mm long Aluminium handles, cast type, anodised long fixed with Self Tapping screws ISI marked all as specifed and directed. |
| 80 | S&F floor door stopper of aluminium alloy body and tongue 140 mm anodised with hard drawn steel spring fixed in floor complete all as specified and directed. and specified. |
| 81 | S&F 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed complete all as specified and directed. and specified. |
| 82 | S&F brass Tower Bolt of 200 mm long (selected quality as approved) fixed with Self Tapping screws complete all as specified and directed. and specified. |
| 83 | S&F brass sliding door bolts, plate type, bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250 mm long( selected quality as approved ) complete all as specified and directed. and specified. |
| 84 | S&F brass Handle cast type polished of 150 mm long (selected quality as approved) fixed with Self Tapping screws complete all as specified and directed. and specified. |
| 85 | S&F in repair curtain rails 20mm dia Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete with SS bracket any colour rings and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified and directed. |
| 86 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale, dirt etc from tanks, mouths of circulating pipes for capacity of tank exc.500 litres and not exc. 1000 litres complete all as specified and directed. |
| 87 | Dismantling water tanks exc. 500 litres of capacity and not exc.1000 litres capacity and removing to store complete all as specified and directed. |
| 88 | Dismantling water tanks exc. 250 litres of capacity and not exc.500 litres capacity and removing to store complete all as specified and directed. |
| 89 | S&F for rotational moulded polythelene water storage tanks 3 layer white colour water tank non toxic effect, algea formation protection (made from virgin grade of polyethylene material which is duly stablized with anti-oxident plastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in postion including necessary GI fittings, inlet / outlet washout, overflow pieces long nipples, checknuts & washer, 20mm dia PTMT ball valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball and 20 mm CP stop valve etc. complete all as specified and as directed. |
| 90 | All as per Ser. item No. 89.00 above but 500ltr capacity complete all as specified and directed. |
| 91 | M&L for Complete removal of existing water proofing treatment of any thickness and cement mortar screed in existing roof including scrapping out old treatment/ bitumen etc. The roof surface shall be thoroughly wire brushed, cleaned to eliminate all sharp projections, washed, dried up and cleaned of all foreign material and dust to receive new water proofing treatment and removal of rubbish off the premises to a distance exc. 500m and not exc 1.5 Km complete all as specified and directed. |
| 92 | Demolition of cement Concrete any description and in any position from Roof, walls and floors complete as as specified and as directed. |
| 93 | M&L for PCC (1:2:4) type B-0 (using 12.5mm graded broken stone aggregate) averaging n.exc 50mm thick as in leveling course on roof slab complete all as specified and as directed. |
| 94 | M&L for water proofing treatment to RCC roof slab complete all as specified below and as directed by Engineer-in-Charge including testing :-(a) 10mm thick rendering in cement mortar (1:3) mixed with and including integral water proofing compound @ 3% by weight of cement on roof slab finished even and fair complete (b) On the dried plastered surface, one coat of approved bituminous primer @ 0.25 lit/Sqm shall be applied. (c) On this primered surface, APP modified bituminous memberance 3mm thick with non woven polyster mat as reinforcement weighing not less than 3.00Kg/Sqm with plain finish shall be laid by torch application method (d) Apply a coat of bituminous aluminium paint @ 0.15 Kg/Sqm. (e) The overlap while torching shall be at least 100mm at the longitudinal edges and 150mm at the ends. (f) The treatment shall be carried as per manufacturer instructions through authorised applicator. |
| 95 | Supply only bitumen primer for water proofing treatment complete all as specified and as directed |
| 96 | M&L for 0.9mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed. |
| 97 | S&F in repair stainless steel auto close/ hydraulic hinge of size 50 mm suitable for shutter of not exc 0.50 sqm area complete all as specified and as directed. |
| 98 | S & F MS steel handle of 150 mm size (modular selected quality of design as approved) fixed with self tapping screw all as specified and directed by Engr-in-Charge |
| 99 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches,pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed |
| 100 | M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 101 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc upto 15.0m height of Bldg complete all as specified and directed. |
| 102 | M&L for 15mm thick cement plaster in CM 1:4 on brick or concrete surfaces/chajjas/parapet finishing even and smooth without using extra cement with sponge finish using water proofing compound 200ml per bag of cement or as per manufactuer's instructions complete all specified and directed.(Note: Waterproofing compound shall be measured and paid separately under relevant item as supply only). |
| 103 | M&L for rendering 10 mm thick cement plaster on faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement upto 12.0mtr height of bldg complete all as specified and directed. |
| 104 | M&L for preparation of new plastered surfaces of wall and applying two coats of Oil bound distemper of any tint over a coat of alkali resistance primer over a thin layer 1.5 mm of wall care putty height of Bldg complete all as specified. |
| 105 | M&L for preparation of new plastered wall surface of any description, width or girth, Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) upto height of Bldg complete all as specified. |
| 106 | M&L for complete removal of existing treatment on walls using steel wire brush, sanding machine, rubbing with emery papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces plastered or unplastered surfaces to receive new finish complete all as specified and directed. |
| 107 | M&L for complete removal of existing treatment on ceilings using steel wire brush, sanding machine, rubbing emery papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces plastered or unplastered surfaces ready to receive new finish complete all as specified and directed. |
| 108 | M&L for applying wall care putty 1 to 2 mm thick on walls surfaces complete all as specified and directed. |
| 109 | M&L for applying wall care putty 1 to 2 mm thick on celing surfaces complete all as specified and directed. |
| 110 | M&L for applying one coat of alkali resistant priming paint on wall complete all as specified and directed. |
| 111 | M&L for applying one coat of alkali resistant priming paint on ceiling complete all as specified and directed. |
| 112 | M&L for two coats of oil bound distemper of approved tint on wall surfaces complete all as specified and directed. |
| 113 | M&L for two coats of oil bound distemper of approved tint on ceiling surfaces complete all as specified and directed. |
| 114 | M&L for complete removal of existing treatment on old plastered surfaces of wall/ ceiling/floor by filling cracks by crack fill paste of approve make as approved by GE removing loose paints etc., removing nails etc and making good surfaces by applying one coat of wall care putty wherever required, smoothen surfaces by sand paper, and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces.NOTE : (i) The contractor shall furnish 5 years performance warranty as per manufacturer of paint(ii) The work should be done by a company recommended applicator and he should be able to furnish stage wise on site technical reports from the concerned company technologist(iii) Sample / make of putty, acrylic emulsion paint etc shall be got approved by contractor from GE prior placing bulk order.) |
| 115 | M&L for preparation of old/ Previously untreated surface steel surfaces of any description over 10cm girth or width and applying two coats of synthetic enamel paint over a coat of Red Oxide Primer all as specified and directed. |
| 116 | M&L for preparation of old/Previously untreated surface wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of pink primer complete all as specified and as directed. |
| 117 | M&L for preparation of external surfaces on chajja, projections, parapet wall and other surface where requred and appying two coats of chemical water proofing treatment on wall/chajja terrace and parapet walls, grooves etc. approved heavy Duty waterproofing coat or equivalent complete all as per manufacturer instruction as directed.(NOTE : Sample / make of water proofing material etc shall be got approved by contractor from GE prior placing bulk order.) |
| 118 | M&L for 2nd class softwood palin fillets, square/ rectangular in section, clean sawn, secured with nails or brads sec exc 13 sqcm but n exc 25 sqcm including dismantling of existing fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section complete all as specified and directed. |
| 119 | M&L for 12mm thick plywood, grade BWR, type BB, number of ply 07 nos, fixed with fevicol and nails for working table/storage almirah to the size and pattern fixed with wooden frame work, including taking down existing plywood complete all as specified and directed. |
| 120 | S&F for 4mm thick laid of 3 No of ply veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face fixed with screws to timber frame work complete all as specified and directed. |
| 121 | M&L for preparation of new wood or wood base surfaces and applying malamine polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed. |
| 122 | M&L for scrapping out old treated wooden surfaces in floors, staircase etc, sanding the surfaces using sanding machine, application of pigment and hardener to desired colour and finally applying two coats of melamine polish with spray guns, compressor etc complete till glossy surface is obtained complete all as specified and as directed. |
| 123 | M&L for preparation of stone masonary surface by cleaning the surface thoroughly using stiff steel wire brush and wash down using soap and clean water to remove algea growth, dust,fungus, liatance , efflorescence, grease, foam repease oils and similar contanminants and applying two coats of \\"Indigo stone & tile topcoat\\" matt or glossy finish as approved by GE.NOTE- 1. Rate quoted by contractor is deemed to be including of roughening of surface (if smooth) to receive indigo stone & tile top coat.2. Rate quoted is deemed to be inclusive of necessary scaffolding / security measures as the work is to be carried out for upto 15mtr height building.)3. Thinner/ Turpentine if reqd to be used shall not be more than 10% of the emulsion.4. Damaged cement joints/pointing shall be made good by the contractor as directed by Engr-in-Charge and cost the same is deemed to be including in the qoated rate.5. Sample / make shall be got approved by contractor from GE prior placing bulk order. |
| 124 | M&L for 2nd class hard wood as in boarding in floor and skirting plain one side with bolt joints but secret nailed for 40 mm thick and match with existing floor includind dismantling of existing one all as specified and as directed. |
| 125 | M&L for roof tiles Mangalore pattern interlocking at side joints, laid dry in roofing complete all as specified and as directed. |
| 126 | E/M PORTIONTaking down carefully aluminium point wiring (light, fan, socket or power), complete (fitting such as switches, ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall by plastering disturbed surface smooth by applying two coats of same colour paint as existing, floor etc. complete all as specified and as directed. |
| 127 | Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including MCBs any type and capacity making good the disturbed surfaces by plastering disturbed surface smooth by applying two coats of same colour paint as existing to match with the existing finishes all as specified. |
| 128 | Taking down the existing unservicable sub main wiring of any type / description as existing at site including making good the disturbed surfaces by plastering disturbed surface smooth by applying two coats of same colour paint as existing to match with the existing finishes complete all as specified and directed. |
| 129 | M&L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC concealed conduit including all accessories, Metal flush box of suitable module, with earth dolly, covered with twin colour (specified by Engr-in- Charge) modular white cover plate & frame for accomodating modular switches, sockets, regulators etc including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the following :- |
| 130 | One light / wall / exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed. |
| 131 | One ceiling fan point controlled by one, one way switch 6 Amps and regulatorNote : PVC Casing caping / Pipe of size as required at site on surface of ceiling (only for fan point) in lieu of concealed is permitted and is deemed to be included in the unit rate quoted. |
| 132 | One light point controlled by two 2 way switch 6 Amps complete all as specified and as directed. |
| 133 | One bell point controlled by one, one way switch 6 Amps complete all as specified and as directed. |
| 134 | One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed. |
| 135 | One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed. |
| 136 | All as per Ser. Item No. 129.00 above but using 2.5 Sqmm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 pin socket outlet plug point,16 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLSH cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures complete all as specified and as directed. |
| 137 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with GI/PVC surface boxes 1.2 mm thick, with earth dolly duly as per site requirment, covered with modular white cover plate with frame suitable for modular switches, or PVC surface mounted modular box, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :- |
| 138 | One light point / Exhaust / Wall fan point controlled by one way switch 5 Amps |
| 139 | One fan point controlled by one, one way switch 5 Amps and regulator |
| 140 | One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 141 | One light point controlled by two 2-way switches 5 Amps |
| 142 | One bell point controlled by one, bell switch 5 Amps |
| 143 | One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 144 | All as per Ser. Item No. 131.00 above but with multistranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLSH cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly. |
| 145 | S&F Modular Switch - 6 Amps, Single pole one way, one module complete all as specified and as directed. |
| 146 | S&F Modular Switch - 6 Amps, Single pole Two way, one module complete all as specified and as directed. |
| 147 | S&F Modular Bell push - 6 Amps, Single pole one way, one module complete all as specified and as directed. |
| 148 | S&F Modular Switch - 16 Amps, Single pole one way, one module complete all as specified and as directed. |
| 149 | S & F Modular socket outlet multipurpose 6 Amps, 5 pin, 2 module, complete all as specified and as directed. |
| 150 | S & F Modular socket outlet multipurpose 16 Amps, 6 pin-shuttered type, 2 module, complete all as specified and as directed. |
| 151 | S&F, Ding Dong bell suitable for operation on AC. 230 volts, single pole complete all as specified and as directed. |
| 152 | S&F modular fan step regulator, 120W - 2 module suitable for ( 48\\" & 56\\" fans) supply complete all as specified and as directed. |
| 153 | S & F for modular type mobile charging socket for mobile charging USB 'C' type 1.5 amp 230 volt 50 HZ AC supply complete all as specified and as directed |
| 154 | S & F for for Lamp holder, PVC body of brass suitable for batten fitting complete all as specified and as directed. |
| 155 | S & F Ceiling rose, 3 phase / PVC / polycarbonate, complete all as specified and as directed |
| 156 | S&F 22 Watt Inverter LED Batten aluminium body with Opal Diffuser, IP20, Battery back-up & Functioning as per Product TDS with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed. |
| 157 | S & F in replacement for wall/ceiling mounted LED 20 watts with out put of 1800 lumens , box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20 watts complete all as specified and as directed. |
| 158 | S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 159 | S & F round shape 15 watt LED hanging light for table adjustable type with efficiency of 100 lumens per watt, sleek design metal housing finish operating voltage 150 V - 270 V AC, 50 Hz including all hanging arrangement all as specified and directed.(NOTE : Sample / make LED hanging light shall be got approved by contractor from GE prior placing bulk order.) |
| 160 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting with peanut lenses luminaire with high power LEDs as light source and electronic driver of capacity 45 watts or above with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 0.6 to 0.9 mtr long bend to required shape with clamps, nut, bolts complete all as directed.(NOTE : Sample / make LED Security light fittings shall be got approved by contractor from GE prior placing bulk order.) |
| 161 | S&F Spot light 12 W (Cool White/Warm white) for fixing of floor/Ceiling and side wall complete all as specified and directed. |
| 162 | S&F Track light 20W ( Cool White/Warm White) for fixing of ceiling/Floor complete all as specified and directed. |
| 163 | S&F of indicator light module suitable for modular switch system, having high brightness LED indicator with coloured diffuser (Red/Green/Amber or as required), suitable for 230V AC, 50 Hz supply, compatible with standard modular switch plates/boxes, made of flame retardant polycarbonate material, complete with all internal connections, fixing in modular plate/frame, including necessary wiring and testing complete, all as specified and as directed by the Engineer-in-Charge. |
| 164 | S & F for wall/ceiling mounted 10 watts or more indoor, box type light fitting white/ warm white as per site requirement, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 2' x 10 watts complete all as specified and as directed. |
| 165 | S & F for LED down light recess mounted luminare, round/ Square type 15 watts (W/WW) as per site requirement with efficiency of 1500 lumens per watt, Series of downlighters with low depth round & larger dia, powder coated white finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver suitable for office spaces sleek design white finish operating voltage 150 V-270 V AC, 50 Hz complete all as specified and directed. Please Enable Macros to View BoQ information |
| 166 | S & F for LED down light recess mounted luminare, round/ Square type 15 watts (W/WW) as per site requirement with efficiency of 1500 lumens per watt, Series of downlighters with low depth round & larger dia, powder coated white finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver suitable for office spaces sleek design white finish operating voltage 150 V-270 V AC, 50 Hz complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender