Tender For Provn Of Modular Kitchen And Renovation Of Two Bathrooms At P-03, Haldighati Line Under Ge(S) Jaipur At Mil Stn Jaipur
Tender Value
9.50 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
15 days left
EMD
19000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Modular Kitchen And Renovation Of Two Bathrooms At P-03, Haldighati Line Under Ge(S) Jaipur At Mil Stn Jaipur
BOQ
| Sl. No. | Item Description |
| 1 | M&L for cutting holes in brick walls exc half brick but not exc one brick built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.Note:- The depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall. |
| 2 | M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms or any horizontal portion and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed. |
| 3 | S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and both face are covered with decorative face veneer with lipping / frame to match including preparation of surface with filler coat and one coat primer with two or more coat french polish till shining to the surface complete all as specified and directed. |
| 4 | S&F for solid Moulded PVC door frame of size 50 x 47 mm made out of 5 mm of approved colour PVC sheet , reinforced with MS square tube, complete all as specified and directed. |
| 5 | Taking down chowkats or frames n.exc 1.5 Sqm each with shutters (without taking off shutters from the frames) including making good of disturbed portion except space for holdfast complete all as specified and directed. |
| 6 | Taking down chowkats or frames exc. 1.5 sqm but n.exc 4.0 Sqm each with shutters (without taking off shutters from the frames) including making good of disturbed portion except space for holdfast complete all as specified and directed. |
| 7 | S&F second class hard wood 30 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed. |
| 8 | Taking down shutters of any description exc 1.00 Sqm but not exc 2.00 Sqm each and removing to or from store complete all as specified and directed. |
| 9 | S&F Factory made Solid PVC Moulded door shutter with particle board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick moulded PVC Sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 10 | S&F brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed 200 mm long complete all as specified and directed. |
| 11 | S&F brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed of 150 mm length of bolt complete all as specified and directed. |
| 12 | S&F butt hinges, medium weight, cold rolled mild steel 100 mm long complete all as specified and directed. |
| 13 | S&F brass handle of 150mm size, cast type, polished bright complete all as specified and as directed. |
| 14 | S&F floor door stopper of brass body and tongue with hard drawn steel spring overall length of cover plate 150 mm complete all as specified and directed. |
| 15 | S&F door closer hydraulically regulated designation No 3, universal type, suitable for door shutter of weight between 61 to 80 Kg of aluminium (die cast) body complete all as specified and directed. |
| 16 | S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed. |
| 17 | M&L for auto close hinges, stainless steel, bright finish or electrogalvanised fixed complete all as specified and as directed. |
| 18 | S&F stainless steel handles, fancy type, of 200 mm size complete all as specified and directed.Make : Ebco / Hettich / Ultima / Hafele or equvalent make as approved by GE. |
| 19 | S&F stainless steel handles, fancy type, of 150 mm size complete all as specified and directed.Make : Ebco / Hettich / Ultima / Hafele or equvalent make as approved by GE. |
| 20 | S&F 18 mm thick (one side decorative lamination and other side balancing lamination ) solid PVC board with cement solvent adhesive for shutters, kitchen cabinet/ cup board /partition wall/ wall cabinet incuding lipping to exposed surfaces with PVC strip as provide by manufacturer complete all as specified and directed. |
| 21 | S&F powder coated (thickness of powder coating not less than 50 micron) anodised aluminium window and ventilator shutters, side hung / sliding / fixed type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21, 100 mm long (2 No) , suitable handle (1 No) complete all as specified and directed. |
| 22 | S&F aluminium expanded metal for securing wire mesh over gauzed shutter including repair / replacement of wooden bidding complete all as specified and directed. |
| 23 | S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 24 | S&F pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including one shop coat of priming complete all as specified and directed. |
| 25 | M&L for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 26 | S&F fibre glass reinforced translucent corrugated sheeting 2 mm thick with two corrugation side lap fixed with L-type or J- type or cranked hook bolt in roof, wall etc complete all as specified and directed. |
| 27 | M&L for 8 mm thick HDHMR (High density high moisture resistant) board both side white laminate as in back of kitchen cabinets/portion of cupboard etc complete all as specified and directed. |
| 28 | M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate, in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed. |
| 29 | M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and smooth with using extra cement complete all as specified and directed. |
| 30 | M&L for glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm / 450X 350X 7 mm / 300x 600x7 mm / 450x 300x7 mm / 600x 1200x7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in CM 1:4 complete all as specified and directed. |
| 31 | M&L for non skid ceramic coloured tiles of design as approved 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 32 | M&L for vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished area of each tiles exceeding 0.42 sqm but not exceeding 1.0 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including screed bed or bedding layer 15 mm thick in CM 1:6 complete all as specified and directed. |
| 33 | Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed. |
| 34 | M&L for rendering 10 mm thick in CM 1:4 on concrete surface and finished even and smooth with out using extra cement with and including integral water proofing compound at rate of 03% by weight of cement or as per manufacturer specification complete all as specified and directed. |
| 35 | M&L for rendering on stone masonry or other than fair faces of brick work of wall 15 mm thick in CM 1:6 and to be finished even and smooth with out using extra cement complete all as specified and directed. |
| 36 | Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 37 | M&L for rendering on stone masonry or other than fair faces of brick work of wall 15 mm thick in CM 1:4 and to be finished even and smooth with out using extra cement complete all as specified and directed. |
| 38 | M&L for preparation of new plastered surfaces of ceiling and applying two coat of oil bound distemper complete all as specified and directed. |
| 39 | M&L for preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper over a coat of wall care putty complete all as specified and directed. |
| 40 | M&L for preparation of newly plastered surfaces of ceiling and applying two coat of oil bound distemper (OBD) over and including a coat of wall care putty complete all as specified and directed. |
| 41 | M&L for preparation of new surface of walls of any description with a coat of 1 mm thick wall putty and applying two coats of acrylic emulsion exterior grade weather proof paint over a coat of primer complete all as specified and directed.Make for Acrylic Emulsion Paint : Apex Ultima of Asian Paint / WeatherShield Max of Dulux / WeatherCoat Anti Dust of Berger or equivalent make as approved by GE.Note :- Acrylic Emulsion Paint shall be carried out as specified in clause 15.17 of SSR Part-I including all necessary arrangement such as scaffolding / working plateform for execution of work. |
| 42 | M&L for complete removal of existing treatment and preparation of old surface of wall of any description with a coat of 1 mm thick wall putty and applying two coats of acrylic emulsion exterior grade weather proof paint over a coat of primer complete all as specified and directed.Make for Acrylic Emulsion Paint : Apex Ultima of Asian Paint / WeatherShield Max of Dulux / WeatherCoat Anti Dust of Berger or equivalent make as approved by GE.Note :- Acrylic Emulsion Paint shall be carried out as specified in clause 15.17 of SSR Part-I including all necessary arrangement such as scaffolding / working plateform for execution of work. |
| 43 | S&F figured glass 5 mm thick, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed |
| 44 | S&F 10 mm thick toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes with channel, allied fittings & hand rail sliding as required complete all as specified and directed. |
| 45 | S&F of CPVC pipes of 16 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. |
| 46 | S&F of CPVC pipes of 20 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. |
| 47 | S&F grating droom 100 mm dia of CP (with or without hole) complete all as specified and directed. |
| 48 | S&F in repair for 15mm bore dia of pipe brass CP, single lever wash hand basin mixer for mixing hot & cold water screwed down for iron pipe including all accessories complete all as specified and directed. |
| 49 | S&F in repair for 15mm bore dia of pipe, brass CP, single lever dual flow pull-out kitchen mixer for mixing hot & cold water with pipe swinging spout wall mounted model with connecting accessories complete all as specified and directed. |
| 50 | S&F in repair white rimless single piece EWC with UF soft close slim seat cover, Hinges, fixing accessories and accessories set and cistern fittings, S trap including fixing as per manufacturer instructions complete all as specified and as directed. |
| 51 | M&L in repair for table top wash basins, of rectangular / square shape Vitreous China, white, flat back, excluding taps, waste, chain and plug and porcelain stopper but including PVC waste pipe minimum 600 mm long suitable for 32 / 40 mm dia of outlet complete all as specified and directed. |
| 52 | S&F in repairs wash hand basin vitreous china white of size 800x475 mm with cabinet (Vanity) and including all fittings and bottle trap complete all as specified and as directed. |
| 53 | S&F in repair for 15mm bore, brass, Single Lever Wall Mixer 3-in-1 System with provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) and including screwed down for iron pipe or for union along with spout complete all as specified and directed. |
| 54 | S&F in repair brass chromium plated overhead shower rose of 250 X 250 mm size, square / round shape, with revolving / swivel joint complete all as specified and directed. |
| 55 | S&F in bib taps 2-in-1 cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fancy type of 15 mm bore dia of pipe complete all as specified and directed. |
| 56 | S&F in repair chromium plated towel rail 600 mm long of brass complete all as specified and directed. |
| 57 | S&F in repair Stainless Steel Towel Rack 600mm Long complete all as specified and directed. |
| 58 | S&F in repair chromium plated soap dish holder complete all as specified and directed. |
| 59 | S&F in repair chromium plated towel ring round (20cm dia) / square (20cm x20cm) shape (minimum weight 300gm) with round flange complete all as specified and directed. |
| 60 | M&L in repair for Tumbler Holder for bathroom complete all as specified and directed. |
| 61 | S&F in repair liquid Push Button Soap Dispenser of brass fixed with and including chromium plated brass screws complete all as specified and directed. |
| 62 | Dismantling of AC/PVC water tank and S&F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litre capacity hoisted and fixed in position complete all as specified and directed. |
| 63 | M&L for providing circular, raised platform of height 20 cm below the tank and base dia 25 cm more than the external dia of PVC tank of 500/1000 liters using PCC 1:3:6 type C1 using 20 mm graded stone aggregate with smooth finish including necessary form work etc. complete all as specified and directed. |
| 64 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75 mm bore of pipe etc complete all as specified and directed. |
| 65 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of 110 mm bore of pipe etc complete all as specified and directed. |
| 66 | S&F PVC (SWR) bends any radius of 75 mm bore without access door complete all as specified and directed. |
| 67 | S&F PVC (SWR) bends any radius of 110 mm bore without access door complete all as specified and directed. |
| 68 | M&L PVC (SWR) vent cowl 110 mm complete all as specified and directed. |
| 69 | M&L PVC (SWR) floor trap of diameter of outlet 75 mm, plain with grating including jointing with solvent cement complete all as specified and directed |
| 70 | M&L PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and directed |
| 71 | S&F in repair bib taps cast copper alloy with crutch or butterfly handle, long body, screwed down, screwed for iron pipe or for brass ferrule fancy type chromium plated of 15 mm bore dia of pipe complete all as specified and directed. |
| 72 | S&F in repair ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of 20 mm bore dia of pipe complete all as specified and directed. |
| 73 | S&F in repair waste fittings, brass, chromium plated 32mm dia for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 74 | S&F in repair ball valves for 15 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 142 gms) complete all as specified and directed. |
| 75 | S&F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 76 | S&F in repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 77 | S&F kitchen plate basket of stainless steel size 520 x 485 x 100 mm of grade SS-304 complete all as specified and directed.Make : Godrej / Hindware / Lifetime or equivalent make as approved by GE. |
| 78 | S&F in repair angle stop valve, fancy type chromium plated cast copper alloy, for 15 mm bore dia of pipe screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. |
| 79 | S&F in repair kitchen plain basket of stainless steel size 520 x 485 x 100 mm of grade SS-304 complete all as specified and directed.Make : Godrej / Hindware / Lifetime or equivalent make as approved by GE. |
| 80 | S&F in repair kitchen cup & saucer basket of stainless steel size 520 x 485 x 100 mm of grade SS-304 complete all as specified and directed.Make : Godrej / Hindware / Lifetime or equivalent make as approved by GE. |
| 81 | S&F in repair baskets guide channel of stainless steel suitable for running basket of grade SS-304, 50cm long and 30 to 40mm width including drilling over stone complete all as specified and directed. |
| 82 | S&F in repair kitchen cutlery & spoon basket (plain) of stainless steel size 520 x 485 x 100 mm of grade SS-304 complete all as specified and directed.Make : Godrej / Hindware / Lifetime or equivalent make as approved by GE. |
| 83 | S&F in repair LED light looking mirror 5.0 mm thick of selected quality glass, square / rectangular shape of 1200 x 800 mm size, bevelled edge, highly resilience with great shine, warm white colour with smart motion sensor switch that turn on / glow the light as soon as one approches the mirror and including fixing glass on wall with brass screw and cup washers complete all as specified and directed. |
| 84 | S&F in repair health faucet (hand shower) chromium plated suitable for 15 mm dia pipe with 1.2 metre long flexible tube with non return valve and wall hook including making connections and fixed in position complete all as specified and directed. |
| 85 | S&F in repair hand shower round shape of 105mm dia, ABS (Acrylonitrile Butadiene Styrene) body with a chrome-plated finish, a face plate, multi-flow functionality, equipped with a cascade effect, with cleaning system for easy cleaning and including 1.5m long flexible chrome tube complete all as specified and directed. |
| 86 | S&F double bowl SS sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including fixing cantilever brackets and connecting union to pipe, overall size 940 mm x 457 mm x 205 mm, and including waste coupling fittings, brass, chromium plated 32mm dia with long screwed shanks and fly-nuts, and PVC waste pipe minimum 900 mm long suitable for 32 mm dia of outlet complete all as specified and directed. |
| 87 | M&L in repair toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 88 | Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
| 89 | Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender