Tender For Special Repairs To Toilets, Tea Rooms, Flooring And Roof In Certain Bldgs Of Hq Southern Comd Office Complex Under Ge (North) Pune
Tender Value
69 Lakhs
Estimated cost
Bid Submission
29 Jul 2026
20 days left
EMD
1.29 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Toilets, Tea Rooms, Flooring And Roof In Certain Bldgs Of Hq Southern Comd Office Complex Under Ge (North) Pune
BOQ
| Sl. No. | Item Description |
| 1 | B/R PORTIONDismantling floor, hearth or wall tiling including cement mortar bedding (but notbacking), removing serviceable tiles to store and rubbish off the premises complete all as directed. |
| 2 | M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding exc. 0.06 sqm but not exc. 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles laid on screed bed in CM 1:4 mixing pidicrete URP @ 10% by wt of cement complete all as specified.Note:- Pidicrete URP measured and paid seperately. |
| 3 | Supply only for pidicrete URP or Equalvalent as approved complete all as specifed and directed. |
| 4 | M&L for glazed ceramic coloured tiles of size 600 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, complete all as specified and directed.(NOTE : Shade/ colour of tiles shall be approved by Garrison Engineer in consultation with user.) |
| 5 | M&L for Vitrified Ceramic tiles (Light shade) 8 to 10mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm as in floor/skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles, complete all as specified and directed.(NOTE : Shade/ colour of tile shall be approved by Garrison Engineer in consultation with user.) |
| 6 | M&L for providing Screed bed or bedding layer of cement mortar (1:6) , 15 mm thick for laying floor finishes under floor tiles, complete all as specified and directed. |
| 7 | M&L for Rendering 10mm thick CM (1:4) on fair faces of brick work or concrete surfaces for tiles in vertical faces, complete all as specified and directed. |
| 8 | M&L for Granite (of any type), 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform, WHB plateform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade and, incl dismantling of existing complete all as specified.NOTE : Shade/ colour to be approved by Garrison Engineer in consultation with user. |
| 9 | Labour only for full round moulding to 18 to 20mm thick granite slab complete all as specified and directed. |
| 10 | M&L for providing Plywood, grade BWP 18 mm thick, type BB, fixed with screws to timber frame work as in cupboard and shelf, cabinet etc, including dismantling of existing complete all as specified and directed. |
| 11 | S & F in repairs Magnet window catcher (round/ square) and connected plate to shutters and frame, complete all as specified and directed. |
| 12 | S&F auto closing hinges with stainless steel screws including taking down existing one complete all as specified and directed. |
| 13 | S&F stainless steel Handle of 75 mm size (modular selected quality of design as approved) fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge. |
| 14 | S & F continuous (piano) hinges, stainless steel, width of flaps (when open) in 30mm, 0.8mm thickness complete all as specified & directed. |
| 15 | M&L for providing Decorative laminate type 1,with 0.9 mm thickness of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed. |
| 16 | M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed. |
| 17 | S&F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 914mm x 460mm x 203 mm, bowl size 405mm x 354mm x 203mm complete all as specified and directed.(NOTE : Sample / make of SS Sink shall be got approved by contractor from GE prior placing bulk order.) |
| 18 | Taking down chowkats or frames not exc. 1.5 sqm each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed |
| 19 | S&F 4 mm thick Sheet frosted glass, ordinary quality, in squares n. exc. 0.5 sq. m each pane glass, each pane fixed with aluminum frame work including rubber beading complete all as specified and directed. |
| 20 | S&F Factory made 100% solid wood plastic composite (WPC) door frame, single rivet 45 mm x 85 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile, floor tile etc and as per site requirement. |
| 21 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm², modulus of elasticity 850 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, ater/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 22 | S&F brass butt hinges medium weight 100mm long complete all as specified and directed. |
| 23 | S&F brass body sliding door bolts, plate type, bright bolt not less than 12mm dia with and incl a mini of 6 bolts and nuts, four on bolt plate and two on staple plate 250 mm long (selected quality as approved ) all as specified. |
| 24 | S&F brass tower Bolt of 200 mm long ( selected quality as approved ) fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge |
| 25 | S&F brass handle of 150 mm (selected quality as approved) long fixed with self tapping screws all as specifed and directed by Engr-in-Charge |
| 26 | S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing as specified. |
| 27 | S&F for 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing as specified. |
| 28 | M&L for cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth all as specified. |
| 29 | S&F in repair vitreous china premium 1st quality Jaquar of size 370x670x720 mm UF soft close seat floor mounted wash down water closet EWC white/ivory/off white incl flush cistern fittings, health faucet alongwith two way bibcock and accessaries complete all as specified (NOTE : Sample / make shall be got approved by contractor from GE prior placing bulk order.) |
| 30 | S&F in repair vitreous china in white colour table top basin Size: 485x370x150mm fixed in position incl waste coupling and PTMT bottel trap, 32 mm dia complete (NOTE : Sample / make shall be got approved by contractor from GE prior placing bulk order.) |
| 31 | S&F in repair bevelled edge looking mirror of any size of selected quality glass of thickness not less than 5 mm, fixed to wall with SS studs complete all as specified. |
| 32 | S & F in repair single lever pillar cock for 15 mm bore pipe fancy type brass CP screwed down screwed for iron pipe or brass ferrule complete all as specified. (NOTE : Sample / make of Pillar cock shall be got approved by contractor from GE prior placing bulk order.) |
| 33 | S&F in repair side handle two way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified. (NOTE : Sample / make bib taps shall be got approved by contractor from GE prior placing bulk order.) |
| 34 | S&F in repair hand shower (health faucet) of cast copper alloy chromium plated with 8mm dia, 1.2m long flexible tube and wall hook complete all as specified and directed by Engr-in-charge. |
| 35 | S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 36 | S&F in repair Angular stop cock/ Push cock 15mm bore cast copper alloy (ISI Marked) chromium plated screwed down high pressure for iron pipe complete all as specified and directed. |
| 37 | S&F in repairs long body bib cock quarter turn suitable for 15mm bore pipe with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified. |
| 38 | S&F 32 mm Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 260gms gms) complete all as specified. |
| 39 | S & F in repair Brass Chromium plated towel rail all as specified and directed. (NOTE : Sample / make of towel rail shall be got approved by contractor from GE prior placing bulk order.) |
| 40 | S&F in repair chromium plated square towel ring with round flange complete all as specified and directed. |
| 41 | S&F in repairs Towel Rack 600mm Long with Lower Hangers, Stainless Steel complete all as specified and as directed. |
| 42 | S&F in repair Paper Holder with Flap Recessed Type of stainless steel, complete all as specified and directed. (NOTE : Sample / make of paper holder shall be got approved by contractor from GE prior placing bulk order.) |
| 43 | S&F in repair Soap dispensar (Glass), with stand complete all as specified and directed. |
| 44 | S&F in repairs sensor Mini Concealed Type Flushing Valve for Urinal Complete Set with Installation Box (Battery Operated) complete all as specified and as directed.(NOTE : Sample / make shall be got approved by contractor from GE prior placing bulk order.) |
| 45 | S&F in repair vitreous china Urinal, Half stall type, white including brass CP 32mm waste pipe and CP brass spreader for fixing with 15 mm dia pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe complete all as specified.(NOTE : Sample / make of Urinal shall be got approved by contractor from GE prior placing bulk order.) |
| 46 | S&F in repair 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1,1:2:4 using 20mm graded stone aggregate complete all as specified. |
| 47 | S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 48 | S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and directed. |
| 49 | S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as specified and directed. |
| 50 | S&F in repairs PVC (SWR) bends of any radius of 110mm bore complete all as specified and directed. |
| 51 | S&F in repairs PVC (SWR) bends of any radius of 75mm bore complete all as specified and directed. |
| 52 | S&F in repairs PVC (SWR) branch piece single (single ‘Y’) equal or unequal for 110mm bore PVC pipe complete all as specified and directed. |
| 53 | S&F in repair PVC(SWR) branch piece single (single ‘Y’) equal or unequal for 75mm bore PVC pipe complete all as specified and directed. |
| 54 | S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified and directed. |
| 55 | S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as specified. |
| 56 | S&F in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm dia of bore complete all as specified and directed. |
| 57 | All as per Ser. item No 56.00 above but on 75mm bore complete all as specified and directed. |
| 58 | M&L for 7-8mm thick PVC laminated false ceiling board of size 600 mm x 600 mm on and including GI powder coated grid work with using 32mm x 23.5mm x 1.5 mm thick main tee, 23.5 mm x 23.5 mm x 1.28 mm cross tee and 23.5mm x 23.5mm x 1.5mm angle fixed to wall for false ceiling including necessary supporting hanger with 2.0mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, size of grid shall be 605 mm x 605 mm including dismantling of ceiling board of any description and any thickness including cover fillets/ grid etc. complete all as specified and as directed. |
| 59 | M&L for 10 mm thick Gymsum board (mositure resistant) seamless as in the ceiling/ linning fixed with counter sunk screws on and incl GI channels frame work of stardard section as per manufacture,s instructions, fixed @ 1.2 m in one direction and 45 cm in center to center in other direction with necessary fixing arrangmentat their junction point at desired heights below roof slab and incl two coats of plastic emulsion paint over a coat of primer over a 2 mm thick layer of putty on exposed surfaces. (The frame work shall be fixed with the help of GI suspenders of suitable size with the help of dash fasteners and along wall, making good disturbed surfaces, smoothening the gypsum board, POP lining at joints as required) including dismantling of existing board complete all as specified and directed. |
| 60 | S&F in repairs for POP cornices of approved size and shape for seamles false ceiling incl necessary fixing arrangments atc complete all as specified and directed. |
| 61 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc upto 12.0 mtr height of Bldg complete all as specified and directed. |
| 62 | M&L for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement upto 12.0m height of Bldg with using @ 2% WPC on cement complete all as specified and directed. |
| 63 | M&L for rendering 10 mm thick cement plaster on faces of brick work or concrete surfaces in CM 1:6 finished even and fair without using extra cement upto 12.0mtr height of bldg complete all as specified. |
| 64 | M&L for 10mm thick cement plaster in CM 1:3 on concrete ceiling surfaces finishing the surfaces even and smooth without using extra cement with any height of Bldg complete all as specified and directed. |
| 65 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces complete all as specified and directed. |
| 66 | M&L for preparation of new plastered wall surfaces any description over 10cm girth or width, not otherwise described and applying two coats of plastic emulsion paint , of any tint over a coat of primer over a 1 mm thin layer of wall care putty complete all as specified and directed. |
| 67 | M&L for preparation of new plastered ceiling surfaces any description over 10cm girth or width, not otherwise described and applying two coats of plastic emulsion paint over a coat of primer over a 1mm thin layer of wall care putty complete all as specified and directed. |
| 68 | M&L for fly ash Brick work with old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc including demolition of brickwork built in cement mortar complete all as specified and directed. |
| 69 | M&L for preparation of old plastered wall surfaces any description over 10cm girth or width, not otherwise described and applying two coats of plastic emulsion paint , of any tint complete all as specified. |
| 70 | M&L for preparation of old plastered ceiling surfaces any description over 10cm girth or width, not otherwise described and applying two coats of plastic emulsion paint , of any tint complete all as specified. |
| 71 | M&L for preparation of old plastered surfaces of wall and applying two coats of lustre paint incl removing loose layer of existing treatment and applying thin layer of wall care putty where as required complete all as specified and as directed. |
| 72 | M&L for preparation of old plastered surfaces of ceiling and applying two coats of lustre paint incl removing loose layer of existing tratment and applying thin layer of wall care putty where as required complete all as specified and as directed. |
| 73 | Removing of vegetation / plantation on the wall/ roof/ any position of up to fourth storey building including necessary scaffolding and roots, girth n. exc. 10cm each and applying chemical treatment with GLYPHOSATE 41% and making good surface including removing /refixing of CI/GI pipe lines complete all as specified and as directed. (Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately) |
| 74 | Complete removal of existing water proofing treatment of any thickness and cement mortar screed in existing roof including scraping out old treatment/bitumen etc.The roof surface shall be thoroughly wire brushed , cleaned to eliminate all shorp projections, washed, dreid up and cleaned all of foreign material and dust to recieve new water proofing treatment and removal of rubbish off the premises to outside ministry of defence land complete all as specified and directed. |
| 75 | M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregates) as in roof padding mixing of WPC @ 2% by weight of cement, of any thickness finished fair and even complete all as specified and as directed. |
| 76 | M&L for 20 mm thick plaster on roof surface in CM (1:4) with using 2% WPC as per manufacturers instructions finish the surface smooth without using extra cement complete all as specified and as directed. |
| 77 | Material and labour for water proofing treatment to RCC roof slab, Chajja complete all as specified below and as directed:-(a) Cleaning the plastered surface and applying Oil Based Bituminous primer @ 0.70 Kg/ Sqm.(b) Laying APP Modified bituminous membrane 3mm thick weighing not less than 3.60 Kgs/ Sqm with non woven polyester mat as reinforcement with plain finish laid over hot bitumen on roof surface.(c) Applying two coats of bituminous aluminium paint on APP membrane surface.(d) Overlaps (end and longitudinal) shall be finished by torch application.(e) The membrane shall be embedded into parapet wall is more than 300mm height or else provided over the full width of parapet wall Note(i) : Overlaps shall be provided as under (a) End Over Laps - 150mm (b) Longitudinal overlaps 100mm. (ii) : Waterproofing Compound shall be measured and paid separtely under relevant item. |
| 78 | Disconnnecting, cleaning and refixing of rotational moulded polyethylene water storage tank of 1000 litres capacity incl fixing of new float valve as required complete all as specified and directed. |
| 79 | S&F rotational moulded polyethylene water storage tank of 500 litres capacity 3 layer black/white colour (as approved) with following specifications, Extra heavy duty, non- toxic effect, algea formation protection (made frome virgin grade of polyethylene material which is duly stablized with anti-oxident plastic), cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet / outlet washout, overflow pieces long nipples, checknuts & washer, 20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20mm brass stop cock etc complete including dismantling existing water tank all as specified and directed. |
| 80 | All as per Ser. item No 79.00 above but 1000 Ltrs capacity complete all as specified and directed. |
| 81 | S&F in repairs 0.63 mm 'Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed. |
| 82 | S&F in repair 0.63 mm plain, galvanised, mild steel sheeting as in roofs, ridges,hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 83 | S&F in repair for mild steel framed work such as grill, grating etc. with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc, sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed. |
| 84 | M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed. |
| 85 | Dismantling and refixing of Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and as directed.NOTE : This item of work is to be operated upto 15m Building Height. |
| 86 | S & F of Roof tiles, Mangalore pattern,interlocking at side joints, laid dry incl dismantling of existing tiles complete all as specified and as directedNOTE : This item of work is to be operated upto 15m Building Height. |
| 87 | S & F of Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 incl dismantling of existing tiles complete all as specified and as directedNOTE : This item of work is to be operated upto 15m Building Height. |
| 88 | M&L for second class hardwood battens squar/rectangular in section at 30 cm centres, Clean sawn secured with nails or brads sec exc 5 sqcm but exc 15 but not exc 25 Sqcm including dismantling of existing complete all as specified and directed.NOTE : This item of work is to be operated upto 15m Building Height. |
| 89 | S&F in repair 10 to 12 mm thick decorative/designed AC board as in eaves board and similar work at height exc. 10 m and not exc. 15 m including two coats of synthetic enamel paint a coat of primer complete all as specified and directed. |
| 90 | M&L for preparation of surfaces and applying two coats exterior water based acrylic coating paint to mangalore tiles roof on heritage buildings including removing/cleaning of existing treatment complete all as specified and as directed. |
| 91 | S&F factory made UPVC in any colour fixed/louvers glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of UPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass or wiremesh shall be paid separately).(Note : For UPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made) |
| 92 | E/M PORTIONTaking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, complete all as specified and directed. |
| 93 | Taking down carefully existing unserviceable main switch /cutout /DBs of any type, capacity and description and removing materials from site and making good disturbed surfaces of walls, floors as per the existing finishes all as specified and as directed. |
| 94 | Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed. |
| 95 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH Cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC Concealed conduit including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH Cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :- |
| 96 | (a) One light point controlled by one, one way switch 5 Amps |
| 97 | (b) One exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 98 | (c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 99 | (d) One 3 pin switch socket outlet, 5 Amps, Same board Complete. |
| 100 | All as per Ser. Item No. 95.00 above but with multistranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly. |
| 101 | S & F in replacement for Modular Switch flush type, single pole, one way, and 6 Amp complete all as specified. |
| 102 | S & F in replacement for Modular Switch flush type, single pole, one way, and 15 Amp complete all as specified. |
| 103 | S & F in replacement for Modular Socket outlet multipurpose having provision for 3 pin, 5 Amp and 2 pin, 5 Amp, piano flush type complete all as specified. |
| 104 | S & F in replacementfor Modular Socket outlet multipurpose having provision for 3 pin, 15 Amp and 3 pin, 5 Amp, piano flush type complete all as specified. |
| 105 | Taking down Exhaust fan of any size, type and make after disconnecting the electrical connections and refixing back (after cleaning and servicing/ repairing / painting / rewinding) including Repairing of Exhaust fan and replacing all the unserviceable parts such as bearing, gunmetal bushes, capacitors, bolt/nuts, split pins, rubber reels, mounting clamps etc. also includes copper Re-winding of fan motor and connecting up with 3 core 1 sqmm copper flexible cable from ceiling rose to the fan all as directed. Note:- The cost of cleaning and servicing/ repairing / painting / rewinding work and 3 core 0.5 sqmm copper flexible cable from ceiling rose to the fan is included in this Item. |
| 106 | S & F Ceiling rose, 3 phase / PVC / polycarbonate, complete all as specified and as directed. |
| 107 | S & F in replacement for LED down light recess mounted luminare, 1'x1' of 24 watts with efficiency of 100 lumens per watt, white/warm white as per site requirement, sleek design aluminium housing polycarbonate diffuser white finish operating voltage 150 V-270 V AC, 50 Hz complete all as directed by Engineer- in-charge(NOTE : Sample / make of LED down light shall be got approved by contractor from GE prior placing bulk order.) |
| 108 | S & F in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 109 | S & F in replacement amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 110 | S & F in replacement MCB SPN 40 - 63 Amps 240 volts 10 KA 50 HZ, C curve,Integrated level holder,colour coded on/off indication complete all as directed. |
| 111 | S & F in replacement MCB DB SPN 4 way, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with integrated door earhting system, with tinned copper bus bar ,neutral link earth link complete all as directed. |
| 112 | S & Fin replacement submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 2.5 Sqmm and one single core 2.5 Sqmm (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed in Brick/stone masonary PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed complete all as specified and as directed. (Note :- Two runs of 2.5sqmm of main copper wire, one run of 2.5sqmm of earth wire cable & PVC conduit shall be measured together as one length). |
| 113 | S&F submain wiring with 2 single core (FRLSH) PVC insulated unsheathed multistranded flexible copper conductorcable of 4.0 Sqmm and one one single core 4.0 Sqmm (FRLSH) PVC insulated, unsheathed multistranded, flexible copper cable as earthing lead, all as per IS 694/1990 drawn through including concealed in Brick/stone masonary PVC conduit and conduit accessories heavy duty ISI marked, providing copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings all as specified and as directed.(Note :- Two runs of 4 sqmm of main copper wire, one run of 4 sqmm of earth wire cable & PVC conduit shall be measured together as one length). |
| 114 | M&L for Earthing complete with galvanised iron earth plate electrode 600 x 600 x 6mm as earthing lead buried directly in ground vertically to depth not less than 2.25 mtr below GL with the top edge of the plate not less than 1.5 mtr from GL, connected to GI earth lead of 4.0mm dia, by means of bolts & nuts, to GI and connected to earthing test point all as shown in elecrical plate No. 3 of SSR Part-I of 2009* specified or indicated and testing on completion including excavation / earth work in any type of starta, PCC (1:3:6) type C1 earthing chamber pre cast slab 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric (XPM) weight not less than 4 KG/sqm cast iron frame, funnel with wire mesh GI watering pipe of 20 mm bore medium grade and lugs with and including GI earth wire 4 mm dia with GI protection pipe of 15 mm medium grade 7.5 meter long etc complete tested on completion all as specified and directed.(Note : (i) Rate quoted shall deemed to include cost of excavation in any type of strata, RFR and removal upto 50metre, PCC pit, funnel and RCC cover plate. (ii) GI wire above 7.5m will be measured and paid seperately.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender