Tender For Repair/ Maintenance Of Internal Electrification & Façade Lights And Repair/ Maintenance Of Water Supply Distribution Lines, Pump, Fountain & Cleaning Of Sump/ Tank Alongwith Its Connected Works At Ndc Under Ge New Delhi
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Jul 2026
9 days left
EMD
76000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Internal Electrification & Façade Lights And Repair/ Maintenance Of Water Supply Distribution Lines, Pump, Fountain & Cleaning Of Sump/ Tank Alongwith Its Connected Works At Ndc Under Ge New Delhi
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE NEW DELHI Name of Work: REPAIR/ MAINT OF INTERNAL ELECTRIFICATION & FAÇADE LIGHTS AND REPAIR/ MAINT OF WATER SUPPLY DISTRIBUTION LINES, PUMP, FOUNTAIN & CLEANING OF SUMP/ TANK ALONGWITH ITS CONNECTED WORKS AT NDC UNDER GE NEW DELHI Contract No: GE/ND-37/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Taking down carefully old point wiring (Light / Fan/ Socket/ Bell Point) with aluminium/ copper conductor cable complete including fittings such as ceiling rose, holders, regulators, bell, switch and socket from existing concealed conduits/ casing caping and making good the disturbed surface of wall/ floor complete to match with the existing surface/ finishes complete all as specified and directed by Engg in charge. |
| 3 | M&L for Point wiring for one light/ ceiling fan/ exhaust fan point controlled by one, one way 6 Amp switch with 1.5 sqmm PVC insulated and unsheathed copper conductor multistranded 1100 volts grade, ISI marking drawn thorugh and new non metallic PVC rigid concealed conduit and conduit accessories, medium grade, ISI marking, concealed Frame for fixing switches, sockets, inculding one run of 1.5 sqmm PVC insulated unsheathed copper cable FRLS grade as in earth wire for continuity and connecting to earth dolly for one light point controlled by one switch complete including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the wall (wash/ paint/ distemper) wherever required (as per the existing condition) complete all as specified and directed.Note: The cost of modular metal flush box and Modular white Cover Plate with Frame, MS terminal boxes and blank plate if required shall be deemed to be included in the unit rate.Make: RR kabel/ Polycab/ Havells/ Gloster/ Finolex |
| 4 | All as per item No 02.00 above but for one bell point controlled by one, one way 5 Amp switch complete all as specified and directed. |
| 5 | All as per Item No 02.00 above but for One 3 pin 5 Amp socket outlet on the same board complete all as specified and directed. |
| 6 | All as per Item No 02.00 above but for One 3 pin 5 Amps socket outlet on independent board complete all as specified and directed. |
| 7 | All as per item No 2.00 above but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core cable for one three pin 15 socket outlet point on independent board complete all as specified and directed by Engineer-in-Charge.Make: RR kabel/ Polycab/ Havells/ Gloster/ Finolex |
| 8 | All as per item No 2.00 above but with 4.0 sqmm single core copper (for Phase, Neutral) and sqmm (for continuous earth wire) cable for one three pin AC/Geyser Outlet point on independent board complete all as specified and directed. Make : RR Kabel, Polycab, Finolex, Gloster, Havells |
| 9 | S&F in replacement of modular type switch single Pole 6 Amp 250V AC with ISI mark including 6 Amps Switch frame complete all as specified and directed. Make : Anchor, IndoAsian, Legrand, Panasonic, Goldmedal, Havells, Schneider, Siemens |
| 10 | S&F in replacement of modular switch 16 A SP one way 240 volts complete all as specified and directed. Make : Anchor/Indoasian/Legrand/Panasonic/Goldmedal/Havells/ Schneider, Siemens |
| 11 | S&F in replacement modular socket 6 A Multi socket for 2 pin and 3 pin 240 volts complete all as specified and directed. Make : Anchor/Indoasian/Legrand/Panasonic/Goldmedal/ Havells/ Schneider, Siemens |
| 12 | S&F in replacement of modular socket outlet 16 A-2/3 pin combined 240 volts complete all as specified and directed.Make : Anchor/Indoasian/Legrand/Panasonic/Goldmedal/Havells /Schneider/ Siemens |
| 13 | S&F in replacement modular bell push 6A with Neon 1 module 240 volts complete all as specified and directed. Make : Anchor/Indoasian/Legrand/Panasonic/Goldmedal/Havells |
| 14 | S&F in replacement of electric bell Ding-Dong AC 230 Volt complete all as specified and directed by Engr-in-Charge. Make : Anchor/Indoasian/Legrand/Panasonic/Goldmedal/ Havells/ Cona/ Schneider/ Siemens |
| 15 | S&F in replacement of Flush Type Piano Switch single Pole 6 Amp 250V AC with ISI mark including 6 Amps Switch frame complete all as specified and directed by Engg in charge.Make : Anchor, IndoAsian, Legrand, Panasonic, Goldmedal, Havells |
| 16 | S&F in replacement of Flush Type Piano switch 16 A SP one way 240 volts complete all as specified and directed. Make : Anchor/Indoasian/Legrand/Panasonic/Goldmedal/Havells, KEI |
| 17 | S&F in replacement Flush Type socket 6 A Multi socket for 2 pin and 3 pin 240 volts complete all as specified and directed. Make : Anchor/Indoasian/Legrand/Panasonic/ Goldmedal/ Havells |
| 18 | S&F in replacement of Flush Type Multi Socket outlet 16 A-2/3 pin combined 240 volts complete all as specified and directed. Make : Anchor/Indoasian/Legrand/Panasonic/ Goldmedal/Havells |
| 19 | S&F in replacement LED lights fitting 1x 20W (Size 4 Feet) 220V, AC Warm/Natural White decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make : Philips, Bajaj, Crompton, Orient, Havells, Polycab, Halonix |
| 20 | S&F in replacement LED light fitting with high output diffuser 10W (Size 2 Feet) 220V, AC Warm/Natural White decorative box type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make : Philips, Bajaj, Crompton, Orient, Havells, Polycab, Halonix |
| 21 | S&F in replacement aesthetically designed wall mounted decorative wall LED light of 15W fixture with opal diffuser to give glare free light including suitable LED lamp of 15W, complete all as specified and directed.Make: Philips Cat Part No. Muziris 31434, Lustre Cat Part No. LI 3618/IW, Wipro Cat Part No. BW06 |
| 22 | S&F in replacement Mirror light/ Photo frame upto 10 Watt LED type WW /NW/CDL made of copper plated metalic body and suitable to mount on wall complete all as specified and directed.Make: Philips Cat Part 31403 or equivalent in Bajaj, Crompton, Orient, Havells, Polycab, Halonix |
| 23 | S&F in replacement LED light fitting upto 15 Watt bulkhead luminaires circular shaped including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-charge. Make : Philips, Bajaj, Crompton, Orient, Havells, Polycab, Halonix |
| 24 | S&F in replacement ceiling secure down light circular shaped recess mounted LED light of 10-15 W Warm/ Natural White complete suitable for existing light fittings (Dia as per sample) complete all as specified and directed.Make: Philips/CG/Havells/ Halonix |
| 25 | S&F in replacement ceiling secure down light circular shaped recess mounted LED light of 20-24 W Warm/ Natural White complete suitable for existing light fittings (Dia as per sample) complete all as specified and directed.Make: Philips/CG/Havells/Halonix |
| 26 | S&F in replacement 3/5 Watt LED candle type warm white lamp complete suitable for existing lamp complete all as specified and directed. Make : Havells/CG/ Philips/Bajaj/ Orient/Jaquar/ Polycab/ Wipro/Halonix |
| 27 | S&F in replacement 9 watt theread type LED Bulb warm /natural white suitable for existing size complete all as specified and directed. Make : Havells/CG/ Philips/Bajaj/ Orient/Jaquar/ Polycab/ Wipro/Halonix |
| 28 | S&F in replacement 9 watt jallbi type warm/ natural white LED Bulb suitable for existing size complete all as specified and directed. Make : Havells/CG/ Philips/Bajaj/ Orient/Jaquar/ Polycab/ Wipro/Halonix |
| 29 | S&F inreplacement LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.Make : Havells/CG/ Philips/Bajaj/ Orient/Jaquar/ Polycab/ Wipro/Halonix |
| 30 | S&F in replacement mirror light 22 wat LED type WW /NW/CDL made of copper plated metalic body and suitable to mount on wall complete all as specified and directed.Make- Philips Cat Part 581999 or equivalent in Havells/CG/Bajaj/ Orient/Jaquar/ Polycab/ Wipro/Halonix |
| 31 | S&F in replacement step /foot light LED light 2-5 watt warm/natural white made of PVC body recess type IP 44 complete all as specififed and directed. Make: Philips Cat Part 581958 or equivalent in Havells/CG/Bajaj/ Orient/Jaquar/ Polycab/ Wipro/Halonix (size as per sample ) |
| 32 | S&F in replacement LED light panel type upto 36 watt 5-8 ft long and 3-6 inch wide having LED profile under PVC body and covered with transparent glass/fiber to give a glarefree light (Wattage depend on size seleced by Engr-in-Charge) complete all as specified and directed.Make : Havells/CG/ Philips/Bajaj/ Orient/Jaquar/ Polycab/ Wipro/Halonix |
| 33 | S&F in replacement warm/cool white rope light 140 led per meter (50 mtr roll) with 5 nos adapter to connect as pe design complete all as specified and directed by engr in charge. Make : Havells/CG/ Philips/Bajaj/ Orient/Jaquar/ Polycab/ Wipro/Halonix |
| 34 | S&F in replacement warm/natural white LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. Make : Philips, Bajaj, Crompton, Orient, Havells, Polycab, Halonix |
| 35 | S&F in replacement bollard LED light 10 watt inverted pyramid tripod type with soft 360 degree light out door type having resistant to corrosion withbetter optics for uniform distribution complete with suitable driveer & fixing nuts ,bolt and washer complete all as specified and directed by engr in charge.Make : Crompton Cat Part No LBLSN -10-CDL or equivalent in Havells/CG/Bajaj/ Orient/Jaquar/ Polycab/ Wipro/ Halonix |
| 36 | S&F in replacement of LED projector light fixture 36W, LED, RGB/RGBW (DMX512 Compatible), IP 66. The housing should be made of high strength pressure die cast aluminium with 3-4mm thick safety glass and coated by static powder making it weather resistant. Protection screen with tempered glass with high impact resistance IK07. Voltage input 24V DC, 50Hz. The luminaire should have options for various beam angle: 10°/25°/40°/60°. Light fixture should be standard DMX512 protocol compatible, the DMX decoder function should be inbuilt the light fixture. Estimated LED Lifetime is L70- 50,000 hours minimum@ 25degree Ambient Temperature. Minimum Light fixture Lumen output atleast 1440 Lumens @ full power. Operating Temperature : - 20°C to +50°C. Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements complete all as specified and directed.Make : Havells/CG/ Philips/Bajaj/ Orient/Jaquar/ Polycab/ Wipro/Halonix |
| 37 | S&F in replacement of RGB/RGBW linear wall washer made of aluminium extrusion, LED, exterior-rated linear luminaire (1000mm), Input Power 18W, DMX512 with inbuilt decoder PCB for individual addressing for programming, Rated input Supply & Fix in replacement of Input Voltage 24V DC, Luminaire luminous flux Minimum range 720Lm. IP protection rating : IP66. The luminaire should have multiple beam angle: 10°, 20, 40, 60°, 10X20° ( as per site requirement) complete all as specified and directed.Make : Havells/CG/ Philips/Bajaj/ Orient/Jaquar/ Polycab/ Wipro/Halonix |
| 38 | S&F in replacement of IP67 power supply system 24V output. Power consumption- 200W complete all as specified and directed. |
| 39 | S&F in replacement of Signal Booster/Splitter with 4-Way output for spreading and amplyfing the DMX Data signals in multiple directions, Input-220-240V AC complete all as specified and directed. |
| 40 | Servicing and testing of 2X512 DMX 512 Controller and synchoronization with the existing DMX controller, Input Power 5-5.5V DC 0.6A, Output Protocol DMX512, Programmability Windows, Mac OS, iOS, Android, Connections Type C USB, XLR3, Ethernet, HE20, battery Memory microSD SD & SDHC, Environment IP20. 0°C - 50°C, Buttons 10 buttons for direct access, 2 buttons to change scene, + 1 button to change zone Dimensions 160x90x45mm 268g, OS Requirements Mac OS X 10.8-10.15, Windows 7/8/10 64bit Standards EC, EMC, ROHS complete all as specified and directed.Note : this job includes complete service of facade light system and make it operational as per user satifaction |
| 41 | S&F in replacement of DMX Special cable (single pair) having one 22AWG pair stranded (7x30) tinned copper conductors, Datalene (FHDPE) insulation, twisted pairs, overall Beldfoil shield (100% coverage) plus tinned copper braid, PVC jacket Cable (As per sample) complete all as specified and directed. |
| 42 | S&F in replacement of enclosure for Power Supply, Splitter, DMX Controller : Plain sides, grey cover, Degree of protection: IP 66/ IP 67, Impact strength: IK 08, Material, base: Fiberglass reinforced polycarbonate, Material, cover: Polycarbonate, Material, cover screws: Polyamide, Material, gasket: Polyurethane, Colour: RAL 7035 complete all as specified and directed. |
| 43 | S&F in replacement of high strength exterior rated LED RGB Ground Buried Uplighter luminaires with dedicated optics for architectural lighting. Luminaire has a choice of architectural floodlighting optics with beam angles of 10°/25°/40°/60°. Wattage between 26-34W,with system lumen output of minimum 1072 lumen with all LED ON and operating voltage of 100- 277V AC. Fixture should have high pressure Die-cast aluminium body with cover of stainless steel and buried barrel of high-quality corrosion resistant nulon with high strength toughened glass which can withstand a weight of 2500 KG and should have 24 no. of LED,s. Luminaire lifetime of 50,000 hours at 50 degree Centigrade @L70 and IP67 & IK10 protection against weather. Fixture should have Height 185 mm±1% and outer dia of 240 mm±1%. The light fixture should be programmable using 8 bit control DMX512 protocol with Operating Temperature Range from -10ºC to 50ºC. LED Work should be complete with necessary factory made weather proof cable, lenses, and external power and data supply [if any], wiring, junction boxes, provisioning of power and data cabling etc. as per site required Suitable fixing arrangement , Foundation as required complete included in all respect complete all as specified and directed by Engineer in Charge. |
| 44 | S&F in replacement PVC gang box with Cover plate 2/3 module suitable for fitting one 5 Amp switch and one 5 Amp socket complete all as specified and directed by Engg in charge.Note : No of Switches and Socket required are included in the quoted rate. |
| 45 | S&F in replacement PVC gang box with cover 04 module suitable for fitting one 15 Amp switch and one socket complete all as specified and directed. Note : No of Switches and Socket required are included in the quoted rate. |
| 46 | S&F in replacement PVC gang box with cover 6 module suitable for fitting switch and socket of 5 Amp complete all as specified and directed. Note : No of Switches and Socket required are included in the quoted rate. |
| 47 | S&F in replacement PVC gang box with cover 8 module suitable for fitting switch and socket of 5 Amp complete all as specified and directed. Note : No of Switches and Socket required are included in the quoted rate. |
| 48 | S&F in replacement electronic fan regulator modular type 120Watt dimmer / step type any Module as per existing complete all as specified and directed. Make : Anchor/Indoasian/Legrand/Panasonic/Goldmedal/Havells |
| 49 | S&F in replacement Dimmer/Step type electronic fan regulator flush type 230V complete all as specified and directed. Make : Anchor/Indoasian/Legrand/Panasonic/Goldmedal/Havells |
| 50 | S&F in replacement fan capacitor 1.5 mfd capacity complete all as specified and directed.Make : Epcos/ Anchor |
| 51 | S&F in replacement fan capacitor 2.5 mfd capacity complete all as specified and directed.Make : Epcos/ Anchor |
| 52 | S&F in replacement ceiling fans complete with blades, down rods, accessories, 230 V, 1200 mm sweep. Min air delivery 230 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) ceiling fan with remote of color white or (As per site requirment) complete with all accessories internally pre wired and including connecting up with three core flexible copper conductor cable with suitable size and making arrangement to hanging of fan to ceiling with proper hook nut bolt complete all as specified and directed. Make : Havells, Crompton, Orient, Atomberg, Usha, Bajaj, Polycab, Halonix |
| 53 | S&F in replacement PVC body ventilation fans AC single phase 230/240 V of size 250 mm sweep (as per sample ) complete all as specified and directed. Make : Havells, Crompton, Orient, Usha, Bajaj, Polycab, Halonix |
| 54 | S&F in replacement PVC body ventilation fans AC single phase 230/240 V of size 160 mm sweep (as per sample ) complete all as specified and directed. Make : Havells, Crompton, Orient, Usha, Bajaj, Polycab, Halonix |
| 55 | Taking down carefully Geysers 25/50 Ltr capacity, opening for inspection, , cleaning, descaling, reassembling and refixing in position after carrying out repairs like soldering/ brazing etc including replacement of pressed rubber gasket, Nuts, bolts, neon indicator lamp 1 Amp etc complete all as specified and directed by Engg in charge. |
| 56 | M&L for spray painting (white colour) with synthetic enamel paint to Geysers 25/50 Liters capacity to reach upto satisfied finish of painting after cleaning and preparation of surface and marking MES No with black paint complete all as specified and directed by Engineer-in-charge. |
| 57 | S&F in replacement heating element of 2.0 KW (Rectangle/triangle /circular ) as required at site including rubber washers (ISI marked) etc complete all as specified and directed.Make : Venus or As per sample. |
| 58 | S&F in replacement storage tank made out of steel sheet of appropriate thickness and confirming to IS 208 (1974) for 50 litre capacity geysers with collar complete duly tested at required pressure as per IT I of 1986 of steel storage tank complete all as specified and directed. |
| 59 | S&F in replacement storage tank made out of steel sheet of appropriate thickness and confirming to IS 208 (1974) for 25 litre capacity geysers with collar complete duly tested at required pressure as per IT I of 1986 of steel storage tank complete all as specified and directed. |
| 60 | S&F in replacement base plate assembly 20 SWG heavy duty suitable for 25/50 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site (As per sample) complete all as specified and directed. |
| 61 | S&F in replacement chromium plated copper connection pipe 600mm long with two brass adopters washers and connecting up complete all as specified and directed. |
| 62 | S&F in replacement thermostat for 25/50 Litres for any type geyser complete all as specified and directed. (As per sample) |
| 63 | S&F in replacement mild steel hole fastner 10mm dia, 100mm long including nut and washer complete all as specified and directed. |
| 64 | S&F in replacement PVC connection pipe 450mm long with two brass adopters washers and connecting up complete ISI mark complete all as specified and directed by Engr-in Charge. |
| 65 | S&F in replacement PVC wire 1.5 Sqmm of FRLSH PVC insulated copper conductor, single core cable drawn through existing PVC conduit of 20 mm dia bore with all fittings accessories complete all as specified and directed. Make : RR Kabel/Havells/ Polycab/ Gloster /Finolex |
| 66 | S&F in replacement PVC wire 2.5 Sqmm of FRLSH PVC insulated copper conductor, single core cable drawn through existing PVC conduit of 20 mm dia bore with all fittings accessories complete all as specified and directed. Make : RR Kabel/Havells/Polycab/ Gloster /Finolex |
| 67 | S&F in replacement submain wiring alongwith earth wire with 2 run of 4 Sqmm (Main Cable and neutral) and one run of 4 Sqmm as earth wire of FRLSH PVC insulated copper conductor, single core cable drawn through existing PVC conduit of 25 mm dia bore with all fittings accessories complete all as specified and directed.Make : RR Kabel/Havells/ Polycab/Gloster/Finolex |
| 68 | S&F in replacement submain wiring alongwith earth wire with 2 run of 6 Sqmm (Main Cable and neutral) and one run of 6 Sqmm as earth wire of FRLSH PVC insulated copper conductor, single core cable drawn through and including uding rigid PVC conduit of 25 mm bore with all fittings accessories complete all as specified and directed. Make : RR Kabel/Havells/Polycab/Gloster /Finolex |
| 69 | S&F in replacement submain wiring alongwith earth wire with 2 run of 10 Sqmm (Main Cable and neutral) and one run of 10 Sqmm as earth wire of FRLSH PVC insulated copper conductor, single core cable drawn through existing PVC conduit of 25 mm bore with all fittings accessories complete all as specified and directed.Make : RR Kabel/Havells/Polycab/Gloster /Finolex |
| 70 | S&F in replacements Wall Mounted indoor type factory made load line DB s double door made out of CRCA mild steel sheet with insulating material like polyester powder coated surface mounted 4 way VTPN 415 volts IP 43 protection with suitable bus bar neutral link and earth link suitable for 4 pole MCCB of 125 A as incoming and SP/TP MCB of rating 5 to 100 Amps as outgoing complete all as specified and directed. |
| 71 | S&F in replacement sheet metal enclosures for DB's when MCB to be used, SPN double door 240 volt, 12 way with 100 Amps rated bus bar complete all as specified and directed. Make : Legrand/C&S/ Indoasian / L&T /Havells/ Schnieder/Siemens |
| 72 | S&F in replacement sheet metal enclosures for DB's when MCB to be used, SPN double door 240 volt, 8 way with 100 Amps rated bus bar complete all as specified and directed. Make : Legrand/C&S/ Indoasian / L&T /Havells/ Schnieder/Siemens |
| 73 | S&F in replacement of MCB SPN/DP 40 to 63 Amp 240 volt 10 KA complete all as specified and directed. Make : Legrand/C&S/ Indoasian / L&T /Havells/Schnieder/Siemens |
| 74 | S&F in replacement of MCB SPN 6-32 Amp 240 volt 10 KA complete all as specified and directed. Make : Legrand/C&S / Indoasian / L&T /Havells/Schnieder/Siemens |
| 75 | S&F in replacement MCB SP 6 Amp to 32 Amp 10 KA.240 volts complete all as specified and directed. Make : Legrand/C&S / Indoasian / L&T /Havells/Schnieder/Siemens |
| 76 | S&F in repair Rigid non-metallic PVC conduit upto 50 mm dia including of boxes (junction/ terminal), all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc for lan/ telephone circuits complete all as specified and directed. Note : Work includes cutting of chases on wall and making good disturbed surfaces. |
| 77 | S&F in replacement sheet Metal enclosure with plug and socket 20 Amp 240 volts with one MCB single pole complete all as specified and directed. Make : Legrand/C&S / Indoasian / L&T /Havells/Schnieder/Siemens |
| 78 | S&F in replacement modular AC /Geyser plug - socket PVC body with modular mini MCB of 16 Amps complete all as specifeied and direted. Make : Legrand/C&S / Indoasian / L&T /Havells/Schnieder/Siemens |
| 79 | M&L for painting of LT /Meter panel with synthetic enamel paint two coats after one coat of primer (colour decided by engr in charge ) to reach upto satisfied finish of painting after cleaning and preparation of surface and marking qtr No with black paint complete all as specified and directed by Engineer-in-charge. Note : Contractor need to inform RWA -Secretary and Engr in charge one day prior to start the work |
| 80 | M&L for welding of rusted part (outer body) using MS sheet of thickness upto 5mm of the LT/meter panel including welding of broken bus bar inside the panel ,maintaining the surface (primer and painting ) as per the existing complete all as specified and directed. |
| 81 | S&F in replacement Indicator of three phase (RGB) set of three with complete accessories complete all as specified and directed. |
| 82 | M&L in replacement for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including galvanised earth 4 mm lead wire bolted (with GI nuts, bolts & check nuts) and riveted to earth (Plate) electrode at one end and connected to main switch board test point at the other and watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 40 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover etc complete all as specified and directed. |
| 83 | S&F in replacement Earth continuity conductor of size 25x4 mm GI strip fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc complete all as specified and directed. |
| 84 | Material & Labour for attending day to day external water supply complaints of all nature i.e. leakage in water supply pipe lines, fittings/fixtures, over flow of overhead tank, no water supply, including recording the complaints in complaint register complete all as specified and directed by Engineer - in - Charge. Note: (Any material i.e. union, socket, elbow, nipple required for attending complaints shall be measured & paid separately as supply only under respectvie item hereinafter)Note: Quoted rates shall deemed to be included the elements as mentioned below:-(a) The complaints shall be attended and the defetcs shall be rectified by skilled Plumber as applicable assisted with adequate No of helpers as directed by Engineer-in-charge(b) The complaints shall be attended & defect shall be rectified within 08 hrs commencing from date and time of notifying the complaint failing which a penalty @ Rs 250/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from contractor's dues.(c) While attending the complaint of water supply if earth work is required then the same shall be measured and paid seperately under appropriate item of Sch 'A'. However , no extra payments shall be made for dewatering(d) Cutting of GI pipe in position and threading is also deemed to be included in the job rate (Fittings and fixtures will be measured and paid separetely under respective items of Sch)(e) All T&P required for attending the Complaints shall be provided by the contractor. |
| 85 | M&L for cleaning of Under ground sump of storage capacity of 1.00 Lac Litres thoroughly by dewatering (mechanized), cleaning inner surfaces of tank complete by manual scrapping, removing mud, sludge collected inside the tank manually to a distance not exceeding 50 Mtrs and washing with bleaching powder or with high strength calcium chloride mixture thoroughly internally, including writing capacity of sump, cleaning date & due date of cleaning with black synthetic enamel paint as per existing pattern (including removing of any vegetation growth on and around the tank) complete all as specified and directed by Engineer-in-Charge. |
| 86 | M&L for cleaning of Rotational moulded PVC water storage service tanks of 500-1000 litres capacity on buildings by dewatering the complete tank, removing the sediments settled at the bottom of tank, scraping the walls and bottom of tank with wire brush and cleaning with bleaching powder solution, washing with clear water and applying one coat of white wash both internally and externally and writing the date of cleaning, due date of cleaning and capacity of tank in paint (including removing of any vegetation growth on and around the tank complete all as specified and directed by Engineer-in-Charge. |
| 87 | S&F in replacement of CI Foot valve of 80 mm dia, Flanged ends, Swing type opration with rubber sheet as per IS-4038 including taking out unserviceable of following sizes complete all as specified and directed by Engineer-in-Charge. Note :- Flanged joints complete with jointing material shall deemed to be included in the unit rate of this items. |
| 88 | Material and labour for painting two coat of synthetic enamel paint as per existing pattern on pipe surface/iron surface connection including preparation of surfaces by scratching and removing the rust, red primer coat complete all as specified and directed. |
| 89 | Supplying, laying, jointing, welding and testing MS Pipe 80mm dia (Heavy class 'C') IS : 1239/3589, laid in trenches or in Horizontal/ Vertical/ inclined position or laying on floors for connections for suction, to header and connected to out going water main CI/DI pipe line, for following size including taking out the old unserviceable pipes complete all as specified and directed.Note:- MS Flanges incl fabrication work will be measured and paid separately. |
| 90 | All as per item No 88.00 above but for size 100 mm dia complete all as specified and directed. |
| 91 | S&F in replacement of MS flange 80 mm bore ,16mm thick duly welded with flange joint including nuts bolts ,washer ,Rubber or fiber board gasket joint of size 80mm sizecomplete all as specified and directed. |
| 92 | S&F in replacement of MS flange 100 mm bore ,16mm thick duly welded with flange joint including nuts bolts ,washer ,Rubber or fiber board gasket joint of size 100mm size complete all as specified and directed. |
| 93 | M&L for fabrication (welding work) of MS Header/Pipe of any size upto 200 mm MS pipe at pump house for arresting leakages complete all as specified and directed. |
| 94 | Taking up old GI steel 20 mm bore tubing with connection including fittings complete all as specified and directed by Engineer-in-Charge. |
| 95 | All as per item No 93.00 above but for size 25 mm bore complete all as specified and directed. |
| 96 | All as per item No 93.00 above buit for size 40 mm bore complete all as specified and directed. |
| 97 | All as per itemNo 93.00 above but for size 50 mm bore complete all as specified and directed. |
| 98 | Supply & Laying of GI pipe 20mm bore mediun grade ISI mark including all fittings in old/ new positions in trenches/ wall/ floor complete and making good the distributed surfaces as per existing complete all as specified and directed.Note: Excavation and earth work if required any shall be included in quoted rate |
| 99 | All as per item No 97.00 above but for size 25 mm bore complete all as specified and directed. |
| 100 | All as per item No 97.00 above but for size 40 mm bore complete all as specified and directed. |
| 101 | All as per item No 97.00 above but for size 50 mm bore complete all as specified and directed. |
| 102 | Supply only in replacement GI Union Med Grade, 20mmbore ISI marked complete all as specified and directed. |
| 103 | All as per item No 101.00 above but for size 25 mm bore complete all as specified and directed. |
| 104 | All as per item No 101.00 above but for size 40 mm bore complete all as specified and directed. |
| 105 | All as per item No 101.00 above but for size 50 mm bore complete all as specified and directed. |
| 106 | Supply only in replacement GI Socket 20mm bore Med grade ISI Marked complete all as specified and directed. |
| 107 | All as per item No 105.00 above but for size 25 mm bore complete all as specified and directed. |
| 108 | All as per item No 105.00 above but for size 40 mm bore complete all as specified and directed. |
| 109 | All as per item No 105.00 above but for size 50 mm bore complete all as specified and directed. |
| 110 | Supply only in replacement GI Elbow 20mm bore Med grade ISI Marked complete all as specified and directed. |
| 111 | All as per item No 109.00 above but for size 25 mm bore complete all as specified and directed. |
| 112 | All as per item No 109.00 above but for size 40 mm bore complete all as specified and directed. |
| 113 | All as per item No 109.00 above but for size 50 mm bore complete all as specified and directed. |
| 114 | Supply only in replacement GI Nipple 20mm bore Med grade of (4\\"/6\\" length) as per requirement both end screwed ISI Marked complete all as specified and directed. |
| 115 | All as per item No 113.00 above but for size 25 mm bore complete all as specified and directed. |
| 116 | All as per item No 113.00 above but for size 40 mm bore complete all as specified and directed. |
| 117 | All as per item No 113.00 above but for size 50 mm bore complete all as specified and directed. |
| 118 | S&F in replacement Gun metal gate valve 15mm bore with iron wheel head screwed both ends for iron pipe as per IS-778 complete, ISI marked complete all as specified and directed. |
| 119 | All as per item No 117.00 above but for size 20 mm bore complete all as specified and directed. |
| 120 | All as per item No 117.00 above but for size 25 mm bore complete all as specified and directed. |
| 121 | All as per item No 117.00 above but for size 40 mm bore complete all as specified and directed. |
| 122 | All as per item No 117.00 above but for size 50 mm bore complete all as specified and directed. |
| 123 | Disconnecting electric connections from LT control panel and starter of submersible pump set of size 5 to 15 HP and removing the pipe line connections from discharge side and taking down/out submersible pump set along with column pipe from bore well with the help of chain pully block including transportation to workshop for repairs and back and lowering of same pump in bore well after repairs after replacement of rusted nuts, bolts, washers, rubber gasket etc including testing complete all as specified and directed by Engg-in-Charge. |
| 124 | Dismantling complete submersible pump of capacity 5-15 HP and repairing the same with replacing the unserviceable spare parts i.e GM bush, rotor sleeve, water seal, cable seal, thrust bearing, sealing ring, upper & lower housing flange upper & lower with stud and nut, wire mesh, drain plug, SS distance sleeve, impeller key, inter ring GM neck ring, Guide bush, GM impeller/EPV Impeller, CI suction chamber, SS coupling, CI stage bowl, T bolt with nut including grinding work of lathe machine and re-assembling the same testing, complete all as specified and directed. |
| 125 | Disconnecting of electric connection and De-coupling the Monoblock pump of capacity upto 10 HP and removing from foundation for repair after opening /cutting the rusted nuts, bolts etc and dismantling complete pump and repairing the same with replacing the following unserviceable spare parts i.e CI Casing wear ring, interstage ring, stuffing box bush, lentern ring, eye bolt with nut, shaft sleeve, impeller key, coupling key, water liquid reflector, bearing cartridge, bearing plate, shaft bush, MS stud with nut, gland rope or Mechanical seal as applicable on site, gasket packing, Tyre-Coupling, DE/NDE Bearings including grinding work of lathe machine and re-assembling the same including the transporting the pump from side to workshop for repair and back, re-installed at existing position after repair and providing new MS nuts, bolts,packing flange etc including testing complete all as specified and directed. |
| 126 | S&F in replacement pump shaft stainless steel suitable for monoblock pump set up to 10 HP including turning, grinding and balancing work complete all as specified and directed. |
| 127 | S&F in replacement CI Impeller suitable for monoblock pump set up to 10 HP including turning, grinding and balancing work complete all as specified and directed. |
| 128 | M&L for rewinding of motor of centrifugal and Submersible pumps with super enamelled copper wire of existing gauge including greasing, varnishing, insulating paper of appropriate class, drying varnishing etc including base repairs if required including cleaning and re-fixing complete all as specified and directed. Make : Milan or Equivalent |
| 129 | S&F in replacement GI column pipe, heavy grade, class 'C', 50 mm bore of 3 metre length, heavy duty, flange welded on both ends complete all as specified and directed. |
| 130 | Supply only Calcium Hypochlorite granuels with 65% to 70% chlorine content (In Drum) in the form of granular and tablet form complete all as specified and directed.Note: Payment for the item shall only be made after producing purchase voucher and receipt of material from Engr in charge |
| 131 | S&F in replacement single phase high speed dewatering pump 220V 50 Hz with discharge upto 570 LPM and 30 Meter head at 2800 rpm alongwith suitable pipe as per outlet size of minimum 15 meter length, installed at the designated place complete all as specified and directed by Engineer-in-Charge. Make : KSB/Crompton/Kirloskar |
| 132 | S&F in replacement of flat submersible cable of size 2.5 Sqmm 3 Core. 1100 Volt complete all as specified and directed by Engineer-in-Charge. |
| 133 | M&L for PCC (1:3:6) type C2 using 40mm graded aggregate as in foundation, Repair of road, repair to make good any surface under excavation after returning filling properly and including fair finish even and fair to exposed surfaces without using extra cement complete all as specified and directed. |
| 134 | Testing of drinking water being collected from local source (bore wells/shallow wells/under ground sumps) at Sangli Apartment area and submission of detailed test reqport to the office of Engineer-in-Charge.(a) Collection of water from different sources of water ie Sump in sterilized bottle and testing in Govt Approved laboratory as mentioned in specification.(b) Carrying out minimum essential testing of water as per IS 10500-1991 mandatory for chemical colour, odour, taste, turbidity, Lead, PH value TDS total hardness, iron, chloride, fluride and residual free chlorine and Bacteriological total Collie from organisms per 100 ml (MPN) and E Collie in 100 ml) and submission to this office with specific recommendation regarding suitability of water for drinking purpose.Note :- Rate quoted shall deemed to be included for : -(i) Cost of sterilized bottle as required.(ii) To and fro transportation charges for collection of samples from source. |
| 135 | S&F in replacement float valve 20mm bore high pressure of PTMT with epoxy coated Aluminum rod and High density plastic Ball screwed for iron pipe, complete all as specified and directed by Engineer-in-Charge. |
| 136 | All as per item No 134.00 above but for size 25 mm bore complete all as specified and directed. |
| 137 | S&F in replacement heating element 3 KW, 240 volts, 50 Hz suitable for solar water heating unit complete all as specified and directed. |
| 138 | S&F in replacement thermostat 0-80 Degree Celsius, 240 volts, 50 Hz suitable for solar water heating unit complete all as specified and directed. |
| 139 | M&L for insulation to 25 mm GI pipe line network with glass wool thermal insulation and properly wrapped with aluminium sheet alongwith entire length, wrap around pipe from tank/panel to all exposed portion including taking out old UNSV insulation after dismantling/taking out the unsv from the site complete all as specified and directed. |
| 140 | S&F in replacement 1000 ltr capacity PVC rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top threaded type) three layered, hoisted and fixed in position complete all as specified and directed. |
| 141 | M&L for development of bore well of any capacity and size at the pressure 10 kg/sqcm to 15 kg/sqcm by diesel engine driven air compressor of capacity 620 cfm includiing air pipe and connected items to improve the yield of tube well complete all as specified and directed by Engineer in charge. |
| 142 | Supply and fixing single headed Stainless Steel fire hydrant landing valve type A (single head outlet) of 80mm dia landing valve with 63mm dia female outlet comlete and 80mm inlet with rubber blank cap and chain as per IS 5290-1983, sutable for brigade hose of 63mm with couplings conforming to IS 903 including taking down the existing one complete all as specified and directed by Engr– in-Charge. Make- Minimax/ Safex/Safegaurd |
| 143 | Supply, fixing, testing and commissioning of wall mounting swinging type First aid fire hose reel with drum, hanging bracket,Thermoplastic rubber (first aid hose) as per IS 12585 20 mm dia 30 mtr length to with stand 20 kg per Sq cm working pressure fitted with gunmetal nozzle and shut off valve of any size complete all as specified. The hose reel shall be conforming to IS 884-1985 including for 25 mm dia MS pipe connection from riser to hose reel sockets,nipples,elbows,valve etc. Drum shall be fixed on adjoining wall through anchor fasteners/cement concrete hook or MS stand as per site requirement and the rate for fixing/hanging items in the rates quoted (for internal hydrant and one each an either side of stage) including taking down old unsv complete all as specified and directed by Engr-in-Charge. |
| 144 | Supply, fixing, jointing and testing in replacement of Gun metal Air release valve of size 25 mm dia having rubber ball ( of suitable range and calibrated) complete screwed both ends for iron pipe, ISI Marked, as per IS: 778 complete all as specified and directed by the Engineer-in-Charge. |
| 145 | Supply, fixing, jointing and testing in replacement of Gun metal 2 way Fire brigade inlet to down commer line with 63 mm dia instantaneous type inlet and 150 mm dia flanged outlet conforming to IS 904 with blank cap and chain existing one complete all as specified and directed by the Engineer-in-Charge . |
| 146 | M&L for taking down fire extinguishers from existing location for refilling including PVC sleeve screw etc of CO2 type 4.5 kgs capacity Fire Extinguisher complete with minor spares . After refilling the extinguishers testing report will be submited to the Engineer-in-Charge complete all as specified and directed. |
| 147 | M&L for taking down fire extinguishers from existing location for refilling including PVC sleeve screw etc of ABC type Stored Pressure 6 kgs capacity Fire Extinguisher complete with minor spares . After refilling the extinguishers testing report will be submited to the Engineer-in-Charge complete all as specified and directed. |
| 148 | M&L for taking down fire extinguishers from existing location for refilling including PVC sleeve screw etc of water (Gas Pressure) type 9 ltr capacity Fire Extinguisher complete with minor spares . After refilling the extinguishers testing report will be submited to the Engineer-in-Charge complete all as specified and directed. |
| 149 | S&F in replacement Detectors Complying with and type Addressable type multi sensor detector with heat and smoke combination Photoelectric / Optical with base with self built intelligence as per IS: 11360, sensor Edward sense response indicator lamps mounting base on 'J' Box for fixing etc complete all as specified and directed. |
| 150 | Supply & fixing test and commissioning of remote response indicator made from 16 SWG CRCA sheet having Dust red LED indicator & provision for cable / wire entry from top including taking down complete all as specified and directed.Make : Safe Zone, Minimax. Electro quip, Mather & Platt |
| 151 | S&F in replacement Explosing proof call box (Add up control module) made from 18 SWG CRCA sheet having single LED indicator and release type push button with incase of FIRE BREAK GLASS printed on front cover with chain and hammer complete all as specified and directed.Make : Safezone, Minimax, Electroquip, Mather & Platt. |
| 152 | S&F in replacement Fire Alarm sounders / Sirens electronic type horizontal single stage continuous normal operation for at least 50 minutes with sound level 65 dB to 120 dB measured at 1.5 meter with sound output variation of + 5 DB for 500 meter range complete all as specified and directed. |
| 153 | Supply & draw in replacement steel conduit multy strand copper conductor wire,1.0 Sqmm single core , FRLSH 1100 Volt grade, complete all as specified and directed.Note: Number of to be drown through each conduit shall be as decided by engineer in charge |
| 154 | S&F in replacement hose box made of 18 gauge MS sheet 750 mmx600mmx250mm with double door locking arrangement in front with 4mm thick glass and door frame made of 16 gauge MS sheet painted fire red outside and brilliant white inside making good surface and making arrangement for 2 hose pipe inside the box incl 65 mm pad lock complete all as specified and directed. |
| 155 | S&F in replacement Reinforced rubber lined fire hose pipe as per IS 636, type 'A', ISI marked, 63 mm nominal internal dia, 15 M long each, duly fitted with stainless steel coupling of 63 mm size, ISI marked with multi serrated tail and double instantaneous spring lock arrangement comprising of male half at one end and female half at other end complete with rubber cup washer and conforming to IS 903, suitable for hydraulic pressure of 21 kgf/cm2, complete all as specified and directed. |
| 156 | M&L for Providing, supplying, installing, testing and commissioning of low height umbrella fountain system of total 03 fountains, comprising interconnected GI/SS/PVC piping network of 20/25/50 mm dia, control valves, NRV, isolation valves, fountain nozzles arranged to create umbrella pattern, required pump set with motor, suction and delivery lines, electrical control panel with cabling, supports, clamps and fittings, complete with all accessories, sealing, alignment and finishing, including testing for leakages and performance to ensure uniform spray distribution, complete in all respects as per site requirements complete all as specified and directed by Engineer-in-Charge. |
| 157 | S&F inreplacement PURVA LED Stainless Steel Adjustable Clamp Underwater Light for fountain including connecting accessories complete (Multi colour, 27W) complete all as specified and directed by Engr-in-Charge |
| 158 | S&F in replacement Automatic Phase Sequence Corrector suitable for 5-15HP with sheet metal encloser and indicator lamp output/input,suitable for 3 phase electric motor with automatically protection against single phasing voltage, unbalanced and low/high voltage with time delay complete all as specified and directed by Engr-in-ChargeNote: (a) Srl Item No 02.00 to 38.00, 40.00 to 42.00, 51.00 to 53.00, 64.00 to 71.00, 100.00, 129.00 to 131.00, 141.00 to 144.00, 151.00 & 153.00 to 155.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody.(b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender