Tender For Special Repairs To Bldg No E-53 (Otm) At Namkum And Special Repairs For Replacement Of Damaged Outdoor Lights Fittings At Various Locations Under Age E/M Namkum & Khojatoli Under Ge Ranchi
Tender Value
28.67 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
16 days left
EMD
57400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Bldg No E-53 (Otm) At Namkum And Special Repairs For Replacement Of Damaged Outdoor Lights Fittings At Various Locations Under Age E/M Namkum & Khojatoli Under Ge Ranchi
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling AC/ CGI/ translucent ( corrugated, semicorrugated,etc), as in roof covering complete. |
| 2 | S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, Chhaja, etc fixed with self tapping screws as specified. |
| 3 | S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridge,etc with self tapping screws or J hooks as specified. |
| 4 | Dismantling timber scantling in fillet,rails,post,rafters,purlin etc under 40 sq cm in section complete |
| 5 | Dismantling of timber scantling 40 Sqcm and over in section in any position complete. |
| 6 | M&L roof trusses (framed ), trussed, purlins, rails & fastening and heavy bracket framing (beam, tee, angle, channel, flat, etc) incl distance pieces, cleats , holdfast etc confirming to FE-410-W(Gde-E-250) quality-A, complete all as spd & directed. |
| 7 | Dismantling of wall/ceiling boards (fibre, pulp, insulation, etc) of any type including cover fillets. |
| 8 | M&L for providing aluminium snap Grid frame work for false ceiling with of size 605X605 mm ,using Main and cross tee of size 36.5mmX25mmX1.4mm,weighing 0.24 kg/RM and 23.5mmX26.4mmX1.4mm weighing 0.191Kg/RM respectively. the snap grid shall be supported at end all along the wall with aluminium anodised angle of size 40mmX25mmX2mm weighing 0.36Kg/RM. The snap grid shall be fixed to ceiling supporting hangers consisting of 2mm dia MS wire/GI wire, J bolts, nuts and washers as per manufacturer's complete all as specified. |
| 9 | M&L 4mm thick non asbestos fibre designer cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws. |
| 10 | Demolition of brick work built in cement mortar incl all quoins, arches, pillar etc |
| 11 | Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6,using old size bricks all as specified. |
| 12 | Taking down cement plaster on brick Walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc |
| 13 | M&L rendering 15 mm thick in cement mortar 1:6 on conc/brick surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 14 | 15mm thick cement plastering in cement mortar 1:4 with WPC on fair faces of brick work or concrete surfaces finished even & fair without using extra cement complete all as specified and directed. |
| 15 | Materials & labour for prepration of newely plastered surfacea nd finishing the surfaces of wall with wall putty and applying two coat of Oil Bound distemper over one Coat of Cement Primer of, any colour, complete all as specified & directed. |
| 16 | M & L for complete removal of existing treatment over wall and applying two coats of distemper oil emulsion over 2mm thick wall care putty complete all as directed |
| 17 | M&L for prepartion of newly plaster surface of walls of any description by washing, rubbing down and applying two coats of acrlic emulsion weather coat paint over a coat of alkali resistant primer, complete all as specified and directed. |
| 18 | M&L for complete removal of existing surface of walls of any description by washing, rubbing down and applying two coats of acrlic emulsion weather coat paint over a coat of alkali resistant primer, complete all as specified and directed. |
| 19 | Taking up or down steel tubing and connections incl cleaning for refixing or removing to store yard of size 15mm bore. |
| 20 | Supplying and laying of 16mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 21 | Taking up or down steel tubing and connections incl cleaning for refixing or removing to store yard of size 20mm bore. |
| 22 | Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 23 | S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe all as specifed. |
| 24 | Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for |
| 25 | M&L Providing precast cement concrete Type B1 1:2:4 (20mm graded aggregate) set in CM 1:6 in window or door cills, lintels,bressumers, steps, quoin blocks (for use with masonry), copings, kneelers, apex stones,, columns, posts, with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match. |
| 26 | Mild steel TMT bars 10 mm dia and over as in reinforcement, cut to length, bent to shape required, incl cranking bending spirally for hooping for columns and binding with MS wire (annealed) not less than 0.9 mm dia or securing with clips. |
| 27 | M&L for mild steel 6 - 8mm dia TMT bars bent to shape required, including cranking, bending and binding with mild steel annealed wire not less than 0.9mm dia complete all as specified and directed. |
| 28 | Taking down chowkhats or frames of any description n exc 1.5 sqm each (without taking off shutters from the frame) |
| 29 | Taking down chowkats or frame with shutters (without taking off shutters from the frames) but Exc 1.5 and n. Exc 4 Sqm each |
| 30 | Taking down shutters of any description exc 1.00 and n . Exc 2 Sqm each complete. |
| 31 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified |
| 32 | S & F powder coated aluminium window and ventilator shutters, side hung type or two or three track type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.if use sliding tack provide all locking arrangement,rubber beading,cleat incl all fitting and fixture complete. |
| 33 | S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165, complete all as specified. |
| 34 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n. Exc 0.5 Sqm in each pane. |
| 35 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square Exc 0.5 Sqm in each pane. |
| 36 | S & F 4 mm thick frosted glass pin head type and glazing with oil putty in squares n. exc 0.5 Sqm in each pane etc complete all as spd and directed. |
| 37 | S & F 4 mm thick frosted glass pin head type and glazing with oil putty in squares exc 0.5 Sqm in each pane etc complete all as spd and directed. |
| 38 | S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples in repairs. |
| 39 | S & F factory made single extruded WPC (Wood polymer composite) solid door/window/ceosetory windows & other frames/chowkhats of size 50 x 100 mm comprising of virgin PVC ploymer of K value 58-60 (suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strenght of 2200 N (Face) & 1100N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixede in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerence in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 40 | S&F factory made solid PVC Moulded door shutter(with particle board core), 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing . |
| 41 | M&L for hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165 |
| 42 | M & L cement concrete type C - 1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc complete. |
| 43 | Supply & fix second class hard wood 35m thick glazed and skeleton factory made shutter for door open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass/gauze etc, size members of shutters as specified in SSR Part-I Sec 8, Clause 8.24 (a) complete all as specified and directed . |
| 44 | Supply & fix 30mm thick flush shutter, solid core construction, with block board core and plywood face panels commercial type on both side complete all as specified and directed. |
| 45 | M&L Pressed steel frames of section 125 x 60 mm for doors with one or more rebates including supply and fixing lugs, hinges, lock strick plate etc complete all as specified. |
| 46 | M&L Pressed steel frames of section 105 x 60 mm for doors with one or more rebates including supply and fixing lugs, hinges, lock strick plate etc complete all as specified. |
| 47 | S&F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long. |
| 48 | S&F Aluminium anodised barrel tower bolts of extruded section and fixed 150 mm long. |
| 49 | S&F Aluminium anodised handles of extruded section and fixed 150 mm long. |
| 50 | S&F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed. |
| 51 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixibng bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as directed. |
| 52 | S&F Mild Steel 150mm, ordinary rat tail rod pattern springs,incl roller and roller plate complete. |
| 53 | S & F Floor door stopper of aluminium alloy body and tongue, anodized, with hand drawn steel spring fixed in door, overall length of cover plate 150 mm |
| 54 | M&L preparation of new wooden or wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying tow coats of synthetic enamel paint over a coat of pink primer |
| 55 | M&L for prepration of new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer |
| 56 | M&L for preparation of old wooden surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint white or tinted complete all as directed. |
| 57 | M&L for preparation of old painted steel surface of any description , over 10 cm width or girth not otherwise described and applying one coat of synthitic enamel paint white or tinted all as directed. |
| 58 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as directed. |
| 59 | Roughing surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust etc. |
| 60 | M&L for coloured non skid ceramic tiles, 7 to 8 mm thick, edgeless , area of each tile exc 600 x 600 mm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:4 to match Shade, pattern, laying etc of tiles as directed at site complete all as specified and directed. |
| 61 | Description all as per Ser Item No 60 above but as in Skirting with 10mm thick rendering in CM 1:3 |
| 62 | M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete |
| 63 | Description all as per Ser Item No 62 above but as in Skirting with 10mm thick rendering in CM 1:3 |
| 64 | M&L for 450x350x7mm thick glazed ceramic tiles colored as in dado/ skirting and vertical serfaces set&jointed in neat cement slurry and pointed in colored cement 0ver and incl 10 mm thick cement mortar 1:4, Shade, pattern, laying etc of tiles as directed at site complete all as specified and directed. |
| 65 | M&L for antifungal Chequered cement concrete tiles 30cm x 30cm x 22 to 25mm thick with grey cement and pigment over & including 20mm thick screed bed in CM 1:6, set, jointed and pointed in neat cement slurry in floors complete. |
| 66 | M&L for 20 mm thick granite (of any type), as in cooking plateform etc set in CM 1:4 and grinding and polishing and rounding / moulding the edges complete. |
| 67 | Dismantling water tanks capacity exc 250 ltrs & n exc 500 ltrs and removing from site complete all as specified and directed. |
| 68 | Supply and fixing three layer PVC tank of 500 ltr capacity including Supplied and fixed 20mm dia brass float valve assembly complete all as specified and directed. |
| 69 | S& F Ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe 20mm as in repairs, complete all as specified and directed. |
| 70 | S&F of white/colour PVC Cabinet Mirror of Size 350 mm X450 mm of approved make |
| 71 | S & F Viterous china wash basin, white, flat back, of size 550x400mm with CP waste coupling, and PVC waste pipe and including fixing brackets, complete fixed as in repairs suitable for pipe of bore 15mm. |
| 72 | S&F PVC waste pipe 32 mm dia and 900 mm long for WHB and Kitchen sink. |
| 73 | S & F Brass chromium plated tubular towel rail, 20mm dia, D Type, and 600mm long with brackets fixed complete with brass chromium plated screws. |
| 74 | S&F in repair Soap dish, chromium plated with fittings complete all as specified & directed by Engr.in.charge. |
| 75 | S & F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15mm bore connections complete all as specified and directed. |
| 76 | S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified. |
| 77 | S&F in repair 15mm bore bib tap long body cast copper alloy CP fancy type with capstan head handle,screwed down, screwed for brass ferrule and fixed |
| 78 | S & F in repair Brass chromium plated wall mixer hot and cold arrangement long shank suitable for 15 mm bore of pipe of approved quality all as specified and directed. |
| 79 | S&F in repair vitreous china squatting pan, Orrissa pattern size 580x440mm white with PVC 'P' or 'S' trap with integral foot rest of any pattern incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor complete. |
| 80 | Supply and fixing in repair PVC valveless syphonic action low level flushing cistern of 10 Ltr capacity including flushing pipe bend etc. complete all as specified and directed. |
| 81 | Stain less steel sink with drainage board made out of 1 mm thick stainless steel sheet 1 mm thick, kitchen type, with plug,washer and waste, incl fixing with cantilver brackets and connecting union to pipe over all size 915x460mm, bowl size 410x 330 x 160mm. all as specified. |
| 82 | S&F in repairs shower rose brass cromium plated with swivel joints of size 75 mm dia cast copper alloy CP, fancy type with CP neck 6\\" long made to shape comptete. |
| 83 | Mild steel Powder coated pipes 32 mm dia with wall thickness 16 gauge, with fixing brackets stops, roller etc. in curtain rods fixed in repairs complete all as specified and directed. |
| 84 | S&F end balls made in conical surface and coated with brown/cherry/Golden colour dia of ball not less than 50mm and suitable for curtain rod of 20mm dia complete |
| 85 | 450 mm long PVC connection with brass check nuts for 15mm bore pipes of aproved quality |
| 86 | S&F in repairs 15mm bore brass stop cock, cast copper alloy CP with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions. |
| 87 | S & F Angle stop cock fancy type, brass chromium plated with CP cup 15 mm bore fixed in repair complete all as specified |
| 88 | 75mm thick, PCC 1:3:6, type C-1 using 20 mm graded stone aggregate, as in plinth protection finished even & smooth without using extra cement complete all as specified and directed . |
| 89 | Demolition of cement concrete of any description and in any position and removing the rubbish from the work site. |
| 90 | Demolition and breaking of drain pipes of 110/75mm size etc complete all as specified & directed. |
| 91 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets etc of 110mm dia |
| 92 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets etc of 75 mm dia |
| 93 | S&F PVC (SWR) bends/shoes any radius of 110mm dia |
| 94 | S&F PVC (SWR) bends any radius provided with access door of 110mm dia |
| 95 | S&F PVC (SWR) bends any radius provided with access door of 75 mm dia |
| 96 | S&F PVC (SWR) branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with paralled branches of 110mm bore with access door |
| 97 | M&L PVC(SWR) Tee of radius 110mm dia. |
| 98 | S & F PVC(SWR) vent cowel of 110mm dia. |
| 99 | S&F PVC (SWR) branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with paralled branches of 75 mm bore with access door |
| 100 | S&F 75 mm bore PVC floor trap with 75mm dia grating including jointing to waste pipe, all as specified |
| 101 | M&L PVC(SWR) pipes 75mm dia single socketed, in any length with rubber ring joints,laid in trenches or fixed to wall with and including stack and clamp. |
| 102 | M&L PVC (SWR) bend of radius 75mm dia. |
| 103 | S&F in repair waste coupling of PTMT (half or full threaded) for 32mm dia complete all as specified and directed. |
| 104 | S&F in repair PTMT grating doom 100mm dia. |
| 105 | Demolition and breaking of SGSW or RCC drain/Soil pipes jointed in cement mortar and taking out from trenches if required internal diameter 150mm. |
| 106 | Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in soft/loose soil complete all as specified and directed. |
| 107 | Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed. |
| 108 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft/loose soil complete all as specified and directed. |
| 109 | Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed. |
| 110 | M & L PCC 1:3:6 type C2 as Concrete bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested; in |
| 111 | Supply & fix 150mm dia salt glazed stone ware (SGSW) drain pipes laid in trenches and jointed in CM 1:1 including testing complete all as specified and directed. |
| 112 | Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site. |
| 113 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 114 | Taking down ceiling fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and keeping at power house Namkum Complete all as specified and as directed. |
| 115 | M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in and including Concealed PVC conduit of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :- |
| 116 | (a) One light point controlled by one, one way switch 5 Amps |
| 117 | (b) One fan point controlled by one, one way switch 5 Amps and regulator |
| 118 | (c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 119 | (d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 120 | Description all as per Ser item No 115 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH, PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH, PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 121 | S & F for Switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed at site. |
| 122 | S & F for socket outlet 2 in 1 , 5 pin, 5 amp, 230 Volts complete all as specified and directed at site. |
| 123 | S & F for switch socket combination 2 in 1 , 3 pin 5 and 15 Amp 230 Volts complete all as specified and directed at site. |
| 124 | S & F for lamp holder , PVC / Polycarbonate type with back plate suitabl for batten/ slanting fittings complete all as specified and directed. |
| 125 | Supply and fixing ceiling rose surface bakelite 3 terminals 65 x 50mm complete all as specified. |
| 126 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 4 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 4 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 4 sqmm cable, one run of 4 sqmm cable and one run of PVC conduit will be measured as one unit |
| 127 | S & F for sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 128 | S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 volts breaking capacity 10 KA including removal of old unserviceable one complete all as specified and as directed. |
| 129 | S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 130 | S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 131 | S & F for MCB Single pole rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 132 | S & F for MCB Single pole rated capacity 6 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 133 | S & F ceiling fans complete with blades, down rods, electronic regulator accessories, 230 v, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushleess direct current motor (BLDC).Note : Old unserviceable shall be deposited to store of AGE E/M and the same is taken on charge and to be mentioned ledger No and Page No on Demolition Statement. |
| 134 | S & F for Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL direct fit lamp, in B-22 cap of make Bajaj, Havells, Phillips complete all as specified and directed. Please Enable Macros to View BoQ information |
| 135 | S & F for Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL direct fit lamp, in B-22 cap of make Bajaj, Havells, Phillips complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender