Tender For Periodic Servicing Of Rolling Shutters For Two Years And Replacement Of Sliding Type Gates / Rolling Shutter With New Rolling Shutters At Ittf, R&D Center, Tms.
Tender Value
53.69 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
20 days left
EMD
1.07 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Palghar → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodic Servicing Of Rolling Shutters For Two Years And Replacement Of Sliding Type Gates / Rolling Shutter With New Rolling Shutters At Ittf, R&D Center, Tms.
BOQ
| Sl. No. | Item Description |
| 1 | Carrying out maintenance checks of rolling shutters of different sizes in ITFT, R&D including supply of consumables, approaching arrangement and replacement of worn out items supplied as per Sr. No. 2 or provided by department. |
| 2 | Gear type rolling shutters of size (WxH) ranges from 2120mm x 3150mm to 6660mm x 7400mm Total shutter - 5 Nos. Details are as per technical specification |
| 3 | Manually operated rolling shutters of size (WxH) ranges from 1350mm x 2500mm to 2130mm x 3500mm Total shutter - 2 Nos. Details are as per technical specification |
| 4 | Supply of spare parts/ accessories for maintenance of existing rolling shutters |
| 5 | G.I. Lath sections 80 mm wide & 1.2 mm thick with matching painting of existing shutter |
| 6 | Galvanised bottom lock plate of 3.15 mm thick reinforced with MS angle, pad locks, puling handles, etc. on both ends and both interior & exterior side. |
| 7 | C type GI guide channels 65 mm to 75 mm wide & 3.15 mm thick with supports complete. |
| 8 | Gear wheel of size varies from 8\\" dia. to 12\\" dia. for existing rolling shutter complete. |
| 9 | Spring of suitable size varies from 12\\" long to 24\\" long for existing rolling shutter shaft with necessary bolts & nuts. |
| 10 | Gear box complete set with gear wheel, handle etc. full assembly suit to existing shutter mechanism. |
| 11 | Top brackets plate 3.15 mm to 10 mm thick of suitable contour for existing rolling shutter with hold-fast complete. |
| 12 | Pad locks with pulling handles (lock pin assembly) for rolling shutter with necessary bolts & nuts. |
| 13 | Gear worm suit to existing shutter mechanism. |
| 14 | GI hood cover 1.2 mm thick of suitable contour for existing shutters. |
| 15 | Dismantling of 2 Nos. of existing Sliding type gates and 2 Nos. of rolling shutter and installation of new wind lock type Electrically operated shutters as per specification including maintenance for 1 year after expiry of guarantee period. |
| 16 | Supplying and fixing of electrically operated rolling shutters as per technical specification. |
| 17 | Supply and erection of supporting frame of suitable size and above for shutters with suitable height , including fixing with hilti make anchors , welding if required etc. Minimum size - ISMC 150 |
| 18 | Dismantling of old sliding gate system in all respects and depositing the scrap in Central Store, TM site. Size : 5 Mtr x 6 Mtr. |
| 19 | Dismantling of existing worn out rolling shutter in all respects and depositing the scrap in Central Store, TM site. Size : 5.65 mtr x 6.3 Mtr - 1 no. and 6.66 Mtr x 7.4 Mtr. - 1 No. |
| 20 | Spare Electric motor of about 370 W suitable for load capacity 600-1000 kg, operating on 400/440 V, 3phase, 50 cycles AC for electrically operated rolling shutter i.e. suitable for Item No. 3.1.1 above. |
| 21 | Carrying out maintenance checks of rolling shutters after expiry of guarantee period of 1 year |
| 22 | Painting of existing shutters with one coat of zinc chromate primer (minimum thickness - 30 microns) and two or more finishing coats of approved make and shade synthetic enamel paint (one coat each of minimum thickness - 35 microns) to give even and uniform surface on both side of shutter. The total thickness of paint shall be more than 100 microns on each side. |
| 23 | APPLICABLE TOTAL GST RATE (%) INCLUDED IN THE QUOTED PRICE: |
| 24 | CGST RATE(%) |
| 25 | SGST RATE(%) |
| 26 | IGST RATE(%) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender