Tender For Balance Work For Construction of Kumarda To Madhonagar ( Uttarala) To Nain Bhakhed Road Km 0/00-1/735 (Sh:-Fc, Passing Places, R/Walls, Missing C.D. Work, Gsb,Wbm-Ii,Wbm-Iii , Tarring Work,Cc Pavement, Side Drain And Parpets , Including 5-
Tender Value
1.10 Crore
Estimated cost
Bid Submission
10 Jul 2026
1 days left
EMD
2.20 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Balance Work For Construction of Kumarda To Madhonagar ( Uttarala) To Nain Bhakhed Road Km 0/00-1/735 (Sh:-Fc, Passing Places, R/Walls, Missing C.D. Work, Gsb,Wbm-Ii,Wbm-Iii , Tarring Work,Cc Pavement, Side Drain And Parpets , Including 5- Year Routine Maintenance After Completion Of Work ) ( Under Nabard Ridf- Xxx )
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in hilly area in all heights and depths and in all kind of soil by all manual /mechanical means including saturated soil comprising of ordinary soil, ordinary rock,soft rocks, hard rocks, chiseling/ wedging out rock ( where blasting is prohibited) and their intermediate classification of soil, complete including setting out true to the required line, grades, width cutting and trimming of side slopes and level as shown in the drawing and as directed by the Engineer-in- Charge at site according to the M.O.R.D. technical specification section 300 and 1600 and sorting out useful materials and stacking the same in all leads and lifts in acquired width of the road and transportation of un useful material for filling in road ways, camber, embankments for grade improvements and disposal of all surplus / unuseful material to the approved dumping sites through all modes of transporation including head load or animals transport or mechanical means along with its leveling fine dressing and hauling /carriage of machineries, materials, tools equipments and safety measures. Recovery for useful stone of 29.52 ( Twenty Nine point five two ) cubic metre at the rate of Rs. 300/- (Rupees Three Hundred) per cubic metre amounting to Rs.8856/- (Rupees Eight Thousand Eight Hundred fifty six )only shall be effected from the contractors running bill on pro-rata basis as per actual quantity executed. Any loss to the public / private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 2 | Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetera in all type of classification of soil, comprising of ordinary soil, ordinary roads, hard rock, chiesling/wedging out rock ( where blasting is prohibited) , as per drawings and MORD technical specification section 300 and 1600 and as per directions of the Engineer-in-Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto any lead and upto any lift including dressing of sides, bottom and back filling in trenches with excavated suitable approved materials to the original surface in layers not exceeding 150mm ( one hundred fifty millimeters) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per directions of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 3 | Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (one cement: four sand : eight graded crushed / broken stone aggregate 40 mm (forty milimeters) nominal size ) and curing complete including the cost of form work in Retaining walls, Breast walls, on ground or under water complete including, pumping or bailing out water ,dewatering removal of slush as required at site which may arisen at the time of laying concrete complete for all heights/depths including cost of form work as per drawings and MORD technical specifications section 800, 900,1200 & 1600 and as per the direction of Engineer-in-Charge . including carriage of material within all leads, lifts and other incidentals .The rate is including octroi, royality, GST, toll tax, or other taxes imposed by the government. |
| 4 | Back filling with granular material behind abutments, wing walls, return walls and retaning walls complete as per drawing and M.O.R.D. technical specification section 1200, 1600 and as per the directions of Engineer-in-Charge including carriage of material within all leads,lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax, or other taxes imposed by the government. |
| 5 | Providing weep holes in brick masonry/stone masonry/plain or reinforced concrete abutment, wing wall, return wall with 100mm (one hundred millimetre) dia P.V.C. pipe extending through the full width of the structures with slope of 1(V): 20(H) towards draining face complete as per drawing and M.O.R.D.technical specification section 700 & 1200 and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government. |
| 6 | Providing and laying mechanically mixed and vibrated plain cement concrete in open foundation for all type of structure complete using plain cement concrete grade M-10 ( M-ten) nominal mix 1:3:6 (one cement in to three sand in to six crushed stone aggregate 40 mm (forty millimetre) nominal size on ground in or under water including curing complete including pumping or bailing out water , dewatering removal of slush as required at site which may arrise at the time of laying concrete complete for all heights/ depths including the cost of form work in toe wall etctera as per drawings and M.O.R.D. technical specification section/ clause 800,900 & 1200 and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax, or other taxes imposed by the government. |
| 7 | Providing and laying mechanically mixed and vibrated plain cement concrete in open foundation for all type of structure complete using plain cement concrete grade M-10 ( M ten) nominal mix 1:3:6 (one cement in to three sand in to six crushed stone aggregate 20mm( twenty millimetre) nominal size) on ground or under water and curing complete including pumping or bailing out water , dewatering removal of slush as required at site which may arrise at the time of laying concrete complete for all heights/ depths including the cost of form work in drain and open foundation as per drawings and M.O.R.D. technical specification section 800, 900 and 1200 and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government. |
| 8 | Providing and laying mechanically mixed and vibrated plain cement concrete in sub structure for all type of structure complete using plain cement concrete grade M-15 ( M fifteen) design mix with cement contents not less than 275 kg (two hundred seventy five kilograme) per cubic metre on ground or under water including curing complete including pumping or bailing out water , dewatering removal of slush as required at site which may arrise at the time of laying under water complete for all heights/ depths including the cost of form work in abutments,Toe walls and Parapets etcetra as per drawings and M.O.R.D. technical specification section 800, 900 & 1200 and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government. |
| 9 | Providing and laying mechanically mixed and vibrated concrete forplain cement concrete in foundation and plinth using reinforced concrete grade M-20 ( M twenty ) design mix with cement contents not less than 320 kg (three hundred twenty kilogram) per cubic metre with 20mm (twenty millimetre) nominal size graded crushed stone aggregate as per drawing and M.O.R.D. technical specification section 800,900 and 1200. Including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in bed block, dirt wall etcetra and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government. |
| 10 | Providing and laying mechanically mixed and vibrated concrete for reinforced concrete in substructure using reinforced concrete grade M-20 ( M twenty ) design mix with cement contents not less than 330 kg (three hundred thirty kilogram) per cubic metre with 20mm (twenty millimetre) nominal size graded crushed stone aggregate as per drawing and M.O.R.D. technical specification section 800,900 and 1200. Including the cost of form work but excluding the cost of reinforcement for reinforced concrete work in bed block, dirt wall etcetra and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government. |
| 11 | Providing and laying mechanically mixed and vibrated reinforced cement concrete in super structure as per drawing and M.O.R.D.. technical specification section 800, 900 and 1400 using R.C.C. grade M-25 ( twenty five) design mix with cement contents not less than 400 kg (four hundred kilogram) per cubic metre with 20mm (twenty millimetre ) nominal size graded crushed stone aggregate and curing complete including cost of form work but excluding the cost of reinforcement for reinforced concrete work in deck slab and to the entire satisfaction and as per the direction of Engineer-in-Charge including carriage of material within all leads , lifts and other incidentals .The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 12 | Providing and laying mechanically mixed and vibrated reinforced cement concrete in wearing coarse using concrete grade M-30( Thirty) design mix with cement contents not less then 430 kgs (four hunderd thirty kilogram) per cubic meter with 20 mm (twenty milimeter) nominal size gradrd crushed stone aggregate and curing complete including cost of form work and reinforcement for reinforced concrete work as per M.O.R.D. technical specification section 800,900,1000 and1400, and as per the direction of Engineer-in-Charge including carriage of material within all leads , lifts and other incidentals .The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 13 | Supplying fitting and placing HYSD bar for reinforcement in sub structure complete as per drawing and M.O.R.D. technical specifications section 1000 and 1200 including cutting, bending, binding and placing in position complete in all respect including the cost of binding wire as per the direction and entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads lifts and other incidental. The rate is including octroi, royality, GST, toll tax, or other taxes imposed by the government. |
| 14 | Supplying fitting and placing HYSD bar reinforcement in super structures complete as per drawings and MORD technical specifications section1000 and 1400, including cutting, bending, binding and placing in position complete in all respect including the cost of binding wire upto all heights / depths or as per the direction and entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads lifts and other incidental. The rate is including octroi, royality, GST, toll tax, or other taxes imposed by the government. |
| 15 | Providing and laying cement concrete cement concrete bedding of grade M-15 ( M-fifteen) inclusive of its cost complete as per drawing and MORD technical specification section 1300 to the entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads lifts and other incidental. The rate is including octroi, royality, GST, tolltax, or other taxes imposed by the government. |
| 16 | Providing and laying rubble stone flooring lais over cement concrete bedding of grade M-15 ( M-fifteen) inclusive of its cost complete as per drawing and MORD technical specification section 1303 to the entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads lifts and other incidental. The rate is including octroi, royality, GST, tolltax, or other taxes imposed by the government. |
| 17 | Providing and laying ( to level or slope) 900mm dia (nine hundred millimetre ) diametre reinforced cement concrete heavy duty non pressure pipes IS Class NP-3 for culverts on first class bedding of granular materials in single row including fixing collar with cement mortar 1 : 2 ( One cement : two sand) but excluding the cost of excavation, protection works, back filling, concrete and masonry work in head walls and parapets as per drawing and M.O.R.D. technical specifications section 1100 and as per direction of Engineer - in- Charge including carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax GST or other taxes imposed by the Government. |
| 18 | Providing and fixing drainage spouts complete with 100mm (One hundred milimetres) dia galvanised mild steel down pipe corrosion resistant structural steel grating complete as per drawing and MORD technical specifications Clause 1209 and as per the direction of the Engineer -in-Charge including carriage of materials within all leads and lift of material .The rate is including octroi, royality, GST, toll tax ,sales tax or other taxes imposed by the government. |
| 19 | Construction of precast RCC railing of M-25 (M - Twenty five) Grade,concrete design mix including the cost of form work and reinforcement and constructing true to line and grade, tolerance of vertical railing post not exceed 1 in 500,( One in five hundred) centre to centre spacing between vertical post not to exceed 2000 mm (Two thousand milimetre) , leaving adequate space between vertical post for expansion, complete as per drawings and MORD technical specifications section 800,900 and 1208.3 including carriage of materials with in all leads, lifts and other incidental . The rate is including octroi, royality, GST, tolltax, Sale Tax or other taxes imposed by the government. |
| 20 | Providing and erecting a \\"W\\" metal beam crash barrier comprising of 3 mm(Three Millimeters) thick corrugated sheet metal beam rail, 70 cm( Seventy centimeter) above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm( One hundred fifty into seventy five into five millimeters) spaced 2 m ( two meter) centre to centre, 1.8 m ( One point eight) high, 1.1 m ( one point one) below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm,( One hundred fifty into seventy five into five millimeters) 330 mm( three hundred thirty millimeters) long complete as per clause 810 including carriage of materials with in all leads, lifts and other incidental . The rate is including octroi, royality, GST, tolltax, Sale Tax or other taxes imposed by the government. |
| 21 | Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm (Einghty to Hundred centimeters) high above ground level, painted black and white in 15 cm ( fifteen centimeter) wide strips, fitted with 80 x 100 mm( eighty into hundred millimeters) rectangular or 75 mm ( seventy five millimeters) dia circular reflectorised panels at the top, buried or pressed into the ground and conforming toIRC-79 and the drawings. including carriage of materials with in all leads, lifts and other incidental . The rate is including octroi, royality, GST, tolltax, Sale Tax or other taxes imposed by the government. |
| 22 | Construction of sub grade and earthen shoulders with approved material obtained from borrow pits within all leads , lifts , transporting to site, spreading, grading to required slope and compacted to meat requirement of table 300.2 as per M.O.R.D. technical specification section 400 and as per direction of Engineer - in- Charge including carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 23 | Construction of granular sub-base by providing well graded material as per table 400.1 spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with three wheel 80-100 ( eighty to hundred) KN static roller to achieve the desired density, complete as per drawing and MORD technical specification section 400 for grading 1 material and as per the directions of Engineer-in-Charge including carriage of material within all leads , lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government. |
| 24 | Providing laying spreading and compacting by mechanical means 75 mm (seventy five millimetre) compacted thickness broken /crushed of stone aggregate of size 63mm to 45mm (sixty three millimetre to forty five millimetre) Grading-II to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 (eighty to hundred ) K.N. static roller in stages to proper grade and camber including applying and brooming, stone screening type-B of size 11.2mm (eleven decimal two millimetre) nominal size at the rate of 0.20 cum (zero point two zero cubic metre) per ten square metre and binding material at the rate of 0.06 (zero decimal zero six) cubic metre per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density as per drawing and M.O.R.D. technical specifications section 400 and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government. |
| 25 | Providing laying spreading and compacting by mechanical means 75 mm (seventy five millimetre) compacted thickness broken /crushed stone aggregate of size 53mm to 22.4mm (fifty three millimetre to twenty two point four millimetre) nominal size Grading-III to water bound Macadam specification including spreading in uniform thickness using template, hand packing, rolling with three wheel 80-100 (eighty to hundred) K.N. static roller in stages to proper grade and camber including applying and brooming, stone screening type-B of size 11.2mm (eleven decimal two millimetre) nominal size at the rate of 0.18 cum(zero point one eight cubic metre) per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density as per drawing and M.O.R.D. technical specifications section 400 and as per the directions of Engineer-in-Charge including carriage of material within all leads , lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government. |
| 26 | Providing and applying primer coat with BITUMEN emulsion (SS-1) on the prepared surface of granular base including cleaning of road surface with hydraulic brooms and spraying primer @ 0.85 Kg. per Sqm. ( zero point eight five kilogram) per square metre using mechanical means as per M.O.R.D. technical specifications section 500 and as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government. |
| 27 | Providing and applying tack coat with Bitumen emulsion (RS-I) using emulsion pressure distributor at the rate of 0.275 kg. (zero point two seven five kilogram) per Square metre on the prepared granular surface treated with primer and cleaned with hydraulic broom as per M.O.R.D. technical specifications section 500 and as per the directions of Engineer-in-Charge including carriage of material within all leads , lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government. |
| 28 | Providing and laying semi dense bituminous concrete with 100-120(One hundred - one hundred twenty )TPH batch type hot mix plant producing an average output of 75( Seventy five) tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.50 to 5.0 ( four point five to five) per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 508 complete in all respects, including carriage of material within all leads , lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government. |
| 29 | Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement thickness as per design and laid over a prepared sub base with 43(forty three) grade cement or any type as per clause 1501 M-30 (M- thirty) grade, design mix cement concrete, coarse and fine aggregates conforming to IS:383(three hundred eighty three), maximum size of coarse aggregate not exceeding 25mm(twenty five millimetre ) mixed in a concrete mixer of not less than 0.2 (zero point two) cubic meter capacity and appropriate weight batcher using approved mix design, laid in approved fixed side form work ( steel channel), laying and fixing of 125(one hundred twenty five) micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing, spreading the concrete with shovels, rakes,compacted using needle, screed and plate vibrators and finished in continuous opreation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant,dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14 days (Fourteen) using curing compound (where specified) and water, finishing to line and grade as per drawing and M.O.R.D. technical specification section 1500 as per directions of Engineer - in- Charge including hauling /carriage of materials to various location through all modes of transportation with in all leads, lifts and other incidental .The rate is including octroi, royality, Malkana, toll tax GST or other taxes imposed by the Government. |
| 30 | Providing and fixing of typical NABARD informatory sign board as per MORD specifications and drawing. Three MS Plates of 1.6 mm ( one point six millimeters) thick, top and middle plate duly welded with MS flat iron 25mm x 5mm( twenty five into five millimeters) size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm.(twenty five into twenty five into five millimeters) The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 (two) nos. 75mm x 75 mm ( seventy five into seventy five millimeters) of 12 (twelve)SWG sheet tubes posts duly embedded in cement concrete M-15 ( M-fifteen) grade blocks of 450mm x 450mm x 600mm,(four hundred fifty into four hundred fifty into six hundred millimeters) 600mm( six hundred millimeters) below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm( forty seven into forty seven millimeters) of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1, as per directions of Engineer - in- Charge including hauling /carriage of materials to various location through all modes of transportation with in all leads, lifts and other incidental .The rate is including octroi, royality, Malkana, toll tax GST or other taxes imposed by the Government. |
| 31 | Providing and erecting ordinary Kilometre stone (precast) made of Reinforced cement concrete M-15 (M- fifteen) nominal mix 1:2.5:5 (one cemenr into two and half sand isto five crushed stone aggregate 40 mm (forty millimetre) nominal size and curing complete including cost of form work and reinforcement for reinforced cement concrete work as per the approved standard design,drawing, sign and size arrangement of letters including painting and lettering as per IRC-8 (eight) and IRC-26 (twenty six) complete as per MORD technical specification section 1703 and fixing at the site complete as per directions of Engineer - in- Charge including carriage of materials with in all leads, lifts and other incidental .The rate is including octroi, royality, Malkana, toll tax GST or other taxes imposed by the Government. |
| 32 | Providing and erecting 200 mtr ( two hundred metre) stone (precast) made of Reinforced cement concrete M-15 (M- fifteen) nominal mix 1:2.5:5 (one cemenr into two and half sand into five crushed stone aggregate 40 mm (forty millimetre) nominal size and curing complete including cost of form work and reinforcement for reinforced cement concrete work as per the approved standard design,drawing, sign and size arrangement of letters including painting and lettering as per IRC-8 (eight) and IRC-26 (twenty six) complete as per MORD technical specification section 1703 and fixing at the site complete as per directions of Engineer - in- Charge including carriage of materials with in all leads, lifts and other incidental .The rate is including octroi, royality, Malkana, toll tax GST or other taxes imposed by the Government. |
| 33 | Semi Reflective Traffic Sign.Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm(one point five millimetre) thick M.S. sheet duly stove white colour in front and grey colour on back with red reflective border of 65mm(sixty five millimetre) width and required letter and figures with reflective tape engineering grade as per clause 1701.3.9 of MORD for rural roads of required shade and colour supported and welded 47mmx47mmx12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 (fifteen) grade cement concrete 450x450x600 mm ( four hundred fifty into four hundred fifty into six hundred millimetre) , 600 mm ( six hundred millimetre) below ground level as per drawing and technical specification Clause 1701.2.2 1701 as per the directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .The rate is including octroi, royality, GST, toll tax or other taxes imposed by the government. |
| 34 | Direction and place indentification signs upto signs 0.90 sqm (Zero decimal nine zero square metre) size board ..Providing and erecting direction and place indentifications of semi reflective sign boards as per IRC-67 made of 1.50 mm (one point five ) thick M.S. sheet duly stove enamelled paint white colour on back with reflective border of 70 mm width and required message, letters, figures with reflective tape of engineering grade as per MORD specification of required shade and colour supported and welded on two nos. 47mmx47mmx12SWG square tube of 3050 mm height duly strengthened by 25mmx5mm MS flat iron on edges on back firmly fixed to the ground by mean of properly designed foundations with M-15 (fifteen) grade cement concrete 450x450x600 mm ( four hundred fifty into four hundred fifty into six hundred millimetre) , 600 mm ( six hundred millimetre) below ground level as per drawing and technical specification Clause 1701 including hauling/ carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental complete and as per direction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government. |
| 35 | Direction and place indentification signs more than 0.90 sqm (Zero decimal nine zero square metre) size board.Providing and erecting direction and place indentifications of semi reflective sign boards as per IRC-67 made of 1.50 mm (One point five millimetre) thick M.S. sheet duly stove enamelled paint white colour on back with reflective border of 70 mm width and required message, letters, figures with reflective tape of engineering grade as per MORD specification of required shade and colour supported and welded on two nos. 47mmx47mmx12SWG square tube of 3050 mm height duly strengthened by 25mmx5mm MS flat iron on edges on back firmly fixed to the ground by mean of properly designed foundations with M-15 (fifteen) grade cement concrete 450x450x600 mm ( four hundred fifty into four hundred fifty into six hundred millimetre) , 600 mm ( six hundred millimetre) below ground level as per drawing and technical specification Clause 1701 including hauling/ carriage of materials to various location through all modes of transportation in all leads, lifts and other incidental complete and as per direction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or other taxes imposed by the Government. Please Enable Macros to View BoQ information Five year routine maintenance Sr. No Description of work Qty. Unit Rate Amount |
| 36 | Routine Maintenance after completion of construction work as per terms and condition of bid document and technical specification of Ministry of Rural Development for rural roads August 2014 (two thousand fourteen) for rural roads and as per the directions of Engineer-in-Charge including hauling /carriage of all labour equipments and materials to various locations through all mods of transportations in all leads, lifts and other incidentals and to the entire satisfaction of the Engineer-in-Charge .\\"The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time.\\" |
| 37 | Rountine Maintenance for 1st year |
| 38 | Rountine Maintenance for 2nd year |
| 39 | Rountine Maintenance for 3rd year |
| 40 | Rountine Maintenance for 4th year |
| 41 | Rountine Maintenance for 5th year Total 1371403.0 |
AI Tender Summary
Tender Timeline
Jul 02, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender