Tender For Repair/Renovation To Correstophen Estate Old Block Type-Ii Qtrs Set No 33& 39 At Igmc Shimla. (Sh:- Providing And Fixing Cupboard,Tile Work, Ceiling Work, Aluminium Work, Ws & Si Etc.)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Jul 2026
0 days left
EMD
6550
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Renovation To Correstophen Estate Old Block Type-Ii Qtrs Set No 33& 39 At Igmc Shimla. (Sh:- Providing And Fixing Cupboard,Tile Work, Ceiling Work, Aluminium Work, Ws & Si Etc.)
BOQ
| Sl. No. | Item Description |
| 1 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. complete including carriage of materials in all leads and lifts.Rae wood/Chill wood. complete including carriage of materials in all leads and lifts. |
| 2 | Providing and fixing 19mm thick commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials within all leads and lifts |
| 3 | Providing and fixing 19mm thick Commercial Board shutters for up boards including fixing with nickel plated piano hinges with screws etc complete) including carriage of materials within all leads and lifts |
| 4 | Providing and fixing 0.80mm thick coloured or plain laminated sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails complete including carriage of material in all leads and lifts |
| 5 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of materials in all leads and lifts. |
| 6 | Providing and fixing fashner for fixing cupboards complete including carriage of materials in all leads and lifts. |
| 7 | Providing and Fixing six lever Drawer Lock ( Godrej) of approved brandincluding carriage of materials within all leads and lifts. |
| 8 | Providing and fixing ISI marked steel handles conforming to with necessary screws etc. complete including carriage of materials within all leads and lifts:(i) 150mm |
| 9 | Providing and fixing 9mm thick water proof shuttering ply of standard quality ISI mark and approved shade and colour in panelling/flooring/cup-board and wall linning including mitring at junctions, butt measured and paid for separately) complete including carriage of material within all leads and lifts. |
| 10 | Providing and laying ceramic glazed wall tiles (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:3(1 Cement : 3 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete |
| 11 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture complete including carriage of materials in all leads and lifts |
| 12 | Providing and fixing 1.50mm thick PVC antistatic venyl Flooring plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately) including carriage of materials within all leads and lifts. |
| 13 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 14 | Providing and fixing wash basin with pedstal C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. |
| 15 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings |
| 16 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 17 | Providing and fixing PVC waste pipe for sink or washbasin including P.V.C. waste fittings including carriage of materials with in all leads and lifts complete in all respect as per the direction of Engineer - in Charge |
| 18 | Providing and fixing 100 mm sand cast iron/ steel grating for floor trap including carriage of materials with in all leads and lifts complete in all respect as per the direction of Engineer - in Charge |
| 19 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. Brass screws and complete |
| 20 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 18.49.1 15 mm nominal bore |
| 21 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 18.53.1 15mm nominal bore |
| 22 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge |
| 23 | Providing and fixing .PVC. connection pipe with brass union including carriage of materials within all leads and lifts :-300/450mm length :-15mm nominal bore. |
| 24 | Providing & fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor 15mm nominal bore including carriage of materials with in all leads and lifts complete in all respect as per the direction of Engineer - in Charge |
| 25 | Providing and fixing G.I union 15mm including carriage of materials with in all leads and lifts complete in all respect as per the direction of Engineer - in Charge |
| 26 | Providing and fixing high pressure PVC (finolex) Type-A spigot and socket, waste and ventilating pipes ISI marked with collar and clamps including fixing with approved adhesive etc. complete. including carriage of materials within all leads and lifts :-110mm nominal size |
| 27 | Providing and fixing PVC (finolex )110 mm dia Plain bends ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts. |
| 28 | Providing and fixing PVC (Finolex) 45 degree bend 110mm dia ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts. |
| 29 | Providing and fixing 110mm X 75mm size PVC Finolex type floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials within all leads an lifts. |
| 30 | Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws etc. complete including carriage of materials within all leads and lifts |
| 31 | Providing and Fixing of Glass Corner Shelf for Tuffun Glass with ESS ESS Railing & Brackets approved brand at Dental college & Hospital including carriage of materials within all leads and lifts. |
| 32 | Providing and fixing Towel Rail AC-501 including carriage of materials within all leads and lifts. |
| 33 | Providing and fixing Towel Ring AC-502 including carriage of materials within all leads and lifts. |
| 34 | Providing and fixing Soap holder with Acralic Dish AC-503 including carriage of materials within all leads and lifts. |
| 35 | Providing and Fixing of Sink Mixer with Leggs Nova/ Benson Gold Complete of approved brand at including carriage of materials within all leads and lifts. |
| 36 | Providing and fixing Wall mixer telephonic arrangement including connection fitting complete in all respect of make complete including carriage of materials within all leads and lifts TM-136* Single lever wall mixer with telephonic shower arrangement only |
| 37 | Providing and Fixing of Curtain Rod 12' LongESS ESS 304 Grade approved brand complete including carriage of materials within all leads and lifts. |
| 38 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) (i) For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 39 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 40 | Providing and fixing ACP sheet 3mm thick in aluminium ceiling/lining/partitions with PVC neoprens gasket fixed with self drilling screws etc. complete as per Architect drawings and by the Engineer-in-Charge including carriage of materials within all leads and lifts. (Cost of aluminium snap beading shall be paid in basic item). |
| 41 | Providing and fixing aluminium Sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16mm |
| 42 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :- 150*10 mm including carriage of materials within all leads and lifts. |
| 43 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. 100 mm including carriage of materials within all leads and lifts. |
| 44 | Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge |
| 45 | Wall painting (one or more coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including carriage of materials in all leads and lifts. |
| 46 | Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete including carriage of materials within all leads and lifts |
| 47 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.including carriage of materials and as per the direction of the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayJul 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender