Tender For Renovation Of Mangalabag Suh At Mallha Sahi In Ward No.34.
Tender Value
25.21 Lakhs
Estimated cost
Bid Submission
10 Jul 2026
2 days left
EMD
25300
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cuttack → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Renovation Of Mangalabag Suh At Mallha Sahi In Ward No.34.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and removing 2.5 cm thick grading concrete from roof slab cleaning the surface lowering and removing the debris within 50m lead. |
| 2 | Removing old lime or cement plaster from walls including raking out joints 12 mm deep and removing the debris within 50m lead |
| 3 | Scrapping, cleaning old paint / distemper wall with scrapers and papering, washing soap or soda water etc complete. |
| 4 | Scrapping, cleaning old paint / distemper wall with scrapers and papering, washing soap or soda water etc complete. |
| 5 | Dismantling and removing 2.5 cm.thick artificial stone flooring including stacking the useful materials for reuse and removing the debris within 50m lead etc. Complete. |
| 6 | Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead |
| 7 | Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep and stacking the useful materials for reuse and removing the debris within 50m lead. |
| 8 | Dismantling brick or stone masonry in lime or cement mortar under 3m. height including stacking the useful materials for reuse and removing the debris within 50m. Lead as per the direction of engineer in charge. |
| 9 | Earth work in all kinds of soil in excavation of foundation trenches for columns, basement, tie beams, walls and steps in all kinds of soil including moorum, hard stoney earth and earth mixed with boulders except sheet rocks and boulder requiring blasting with all leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with all leads and lifts, T&P for shoring shuttering dewatering if required etc. complete as per the drawing, designing including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. |
| 10 | Supplying and filling the foundation and plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance royalty and taxes of all materials, cost of all labour, T&P etc. as per the direction of engineer in charge. |
| 11 | Providing & laying cement concrete of prop (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 150mm thick hoisting, lowering, laying, watering and curing etc. Complete. To the required levels including cost, conveyance, royality and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer in charge. |
| 12 | First class Fly Ash brick work in cement mortar (1:4) in foundation and plinth with best quality bricks having crushing strength from 75kg/cm2 to 99kg/cm2, immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes moulding, chamfering, corbelling etc. complete as per drawing, design and specification, watering and curing for 7 days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer-in-charge. |
| 13 | First class Fly Ash brick work in cement mortar (1:4) in Super Structure with best quality bricks having crushing strength from 75kg/cm2 to 99kg/cm2, immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes moulding, chamfering, corbelling etc. complete as per drawing, design and specification, watering and curing for 7 days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer-in-charge. |
| 14 | First class Fly Ash brick work in cement mortar (1:4) in 1st Floor with best quality bricks having crushing strength from 75kg/cm2 to 99kg/cm2, immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes moulding, chamfering, corbelling etc. complete as per drawing, design and specification, watering and curing for 7 days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer-in-charge. |
| 15 | Providing & laying cement concrete of prop. (1:2:4) in foundation bed and floors using 12mm nominal size down graded, screened, washed hard black crusher broken granite Chips of approved quality & from approved quarry including laying in the layers not exceeding 150 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge. |
| 16 | Providing 16mm thick cement plaster in C M (1:6) over walls including cost of all materials , labours etc complete. (GROUND FLOOR) |
| 17 | Providing 16mm thick cement plaster in C M (1:6) over walls including cost of all materials , labours etc complete.(1ST FLOOR) |
| 18 | Providing 12mm thick cement plaster in CM (1:4) over walls including cost of all materials, labours etc complete. (GROUND FLOOR) |
| 19 | Providing 12mm thick cement plaster in C M (1:4) over walls including cost of all materials , labours etc complete.(FIRST FLOOR) |
| 20 | Providing 6mm thick cement plaster in cement mortar (1:1) chemical treatment with Roff Rust clear concrete Bond GP & Plaster Master / Shikha Rustoff Sikha Hy Bond & Sika CIM including cost of materials , labour etc complete.(Ground Floor) |
| 21 | Providing 6mmmm thick cement plaster in cement mortar (1:4) chemical treatment with Roff Rust clear concrete Bond GP & Plaster Master / Shikha Rustoff Sikha Hy Bond & Sika CIM including cost of materials , labour etc complete.(1St Floor) |
| 22 | Finishing plastered surfaces of walls with Berger Synthetic putty (interior wall puty) wall puty and making smooth to receive painting. |
| 23 | Wall painting two coats with 100% Acrylic emulsion paint (1st quality) exterior grade(Weather Seal Coat) of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULOX or equivalent to make an even finished surface over a coat of primer with water bond cement primer in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete.(GROUND FLOOR) |
| 24 | Wall painting two coats with 100% Acrylic emulsion paint (1st quality) exterior grade(Weather Seal Coat) of approved make & shade manufactured by reputed manufacturer like NEROLAC / ASIAN / BERGER / DULOX or equivalent to make an even finished surface over a coat of primer with water bond cement primer in all heights with all scaffolding and staging charges including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete.(FIRST FLOOR) |
| 25 | 4cm. thick grading CC (1:2:4) on roof slab with 12mm. Size hand broken & down grade Size on old work etc. Complete.(FIRST FLOOR) |
| 26 | Supplying, fitting and fixing of M.S. grill gate with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 27 | Painting two coats to the wall surface by using 100% premium Acrylic emulsion paint of approved make like NEROLAC ALLS CAPES 24 carrot emulsion/ BERGER luxel luxury silk emulsion / ASIAN Royal / ICI velvetouch or equivalent make of approved shade to interior wall surface over a coat of primer with water bond cement primer after preparing the surface smooth by applying putty punning with Synthetic Acrylic wall putty including finishing the surface smooth by sand papering in all heights including scaffolding charges with cost, conveyance, taxes of all materials, cost of all labours, etc. as required for the work complete in all respect.(Ground Floor Plastic Paint) |
| 28 | Painting two coats to the wall surface by using 100% premium Acrylic emulsion paint of approved make like NEROLAC ALLS CAPES 24 carrot emulsion/ BERGER luxel luxury silk emulsion / ASIAN Royal / ICI velvetouch or equivalent make of approved shade to interior wall surface over a coat of primer with water bond cement primer after preparing the surface smooth by applying putty punning with Synthetic Acrylic wall putty including finishing the surface smooth by sand papering in all heights including scaffolding charges with cost, conveyance, taxes of all materials, cost of all labours, etc. as required for the work complete in all respect.(1st Floor Plastic Paint) |
| 29 | Enamel painting Two Coats(FIRST FLOOR) |
| 30 | Enamel painting Two Coats(GROUND FLOOR) |
| 31 | Fixing tile in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades on the tiles etc. complete.Antiskid Floor Tile - (Size-300mmX300mm) |
| 32 | Fixing tile in floors treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades on the tiles etc. complete. Antiskid Floor Tile - (Size-300mmX300mm) |
| 33 | Fixing ChequredTiles in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles all complete with & without cost of precast Chequred tiles. |
| 34 | Fixing Tiles to dados skirting & risers on 12mm. thick C.P (1:3) jointed with neat cement slurry Digital Wall Tile - (Size-300mmX450mm)Ground Floor |
| 35 | Fixing Tiles to dados skirting & risers on 12mm. thick C.P (1:3) jointed with neat cement slurry Digital Wall Tile - (Size-300mmX450mm)1st Floor |
| 36 | Supplying, fitting & fixing up window (sliding type) made up aluminium section 9778 as window frame section No. 4095, 4096 and 9777, 3994 as shutter frame with 5mm. thick plain glass as panel fitted with rubber bending including lucking arrangement including all fittings including cost of materials all taxes, labour, T & P excluding cost of glass etc complete as per direction of Engineer in Charge. |
| 37 | Providing , supplying of all labour with T&P for wall Painting/Mural Displaying SBM messages with Swaccha 2021 Logo & decorative children playing photograph for art of different message & drawing in wall surface with weather coat over a coat of primer including cleaning the exhisting surface with cost, conveyance etc. all complete as per direction of EIC. |
| 38 | 2.5cm AS flooring with CC (1:2:4) with punning using 12 mm crusher broken granites chips. |
| 39 | Supplying and transporting ISI marked 35mm thickFlush Door with all fittings as poer specification etc. Complete. |
| 40 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32 mm x 32 mm x 2 mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.C/C and stainless square pipe bracing of size case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 41 | Supplying, transporting, fitting and fixing of Sinage made with 50mm Square stainless Still Pipe as per approved specification etc. |
| 42 | Providing & laying of 60mm thick Factory made cement concrete Interlocking Paver block of M35 grade concrete & of approved variety in colour & size made by block making machine with strong Vibratory compaction of approved design & shape , laidin required colour & pattern over 50mm thick compacted bed of course sand , filling with joints with sand etc. all complete including cost, coveyance & royalty of all materials etc. |
| 43 | Remove excavated Materials from site by mechanicaal means with loading and unloading the same within 5km away from site. |
| 44 | Cutting holes through the brick or laterite masonry wall for taking Sand Cast Iron (SCI) /centrifugally cast (spun) iron pipes and mending good the damages. |
| 45 | Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per specification. |
| 46 | Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete. |
| 47 | Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3-2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification(580 mm x 440mm size white glazed Vitreous China Orissa Pattern squatting pan(22818)) |
| 48 | Supplying all materials, labour and T&P for construction of 1.20mtr.dia.x1.50mtr. Deep soak-way pit with dry brick walling up to 1.10mtr. height and brick work with cement mortar (1:6) for 0.45mtr. height of wall at top,cement plaster (1:3) inside and outside,inside filled with dry brick khoa of 50mm.to 100mm.size to a height of 2.00mtr.from bottom, covered by means of 40mm.thick R.C.C. perforated slab,50mm.thick R.C.C.well cover in pieces fitted with iron rings including earth work in excavation and refilling of cavity around the pit etc. all complete as per approved design and drawing. |
| 49 | Supplying all materials, labour and T&P for construction of inspection chamber as per P.H. specification and design all complete. |
| 50 | Suplying all materials,Labour,T&P ,fitting,fixing of Wall or ceiling with PVC Pipe with ASTMD-1785(Schedule-80) of the following nominal size including cost and carriage etc all complete.15mm dia G.I. Pipe |
| 51 | 20mm dia PVC Pipe |
| 52 | 25mm dia. ASTM PVC Pipe |
| 53 | 40mm dia. ASTM PVC Pipe |
| 54 | Suplying all materials,Labour,T&P ,fitting,fixing of Brass or Gun Metal Full Way Valve. 25mm dia brass / GM ball valve |
| 55 | 40mm dia brass/ GM ball valve |
| 56 | Supplying all materials labour an T&P for fitting and fittings the following fittings as per specification etc.110 mm OD P.V.C. SWR D/S Pipe (ISI type-B) |
| 57 | 110x110x110mm SWR Tee |
| 58 | 110mm UPVC Door Bend |
| 59 | 110mm Clamp |
| 60 | 110mm dia PVC Cowel |
| 61 | 110mm dia Socket |
| 62 | 110mm SWR P Trap |
| 63 | 100mm Plain Bend |
| 64 | 110mm Offset |
| 65 | Supplying all materials, labour and T&P for fitting fixing of following types of P.H. Fittings etc. all complete. A) 15mm dia CP 2 in 1 Tap |
| 66 | 15mm dia CP L/B Bib Cock |
| 67 | 15mm dia CP Conceal stop cock |
| 68 | Swan neck pillar cock |
| 69 | 32mm pvc Waste pipe |
| 70 | Framed Mirror |
| 71 | 32mmx 1150mm long PVC waste pipe |
| 72 | 15mmx600mm PVC connection pipe |
| 73 | Supplying of all materials,labour,T&P for fixing Wash hand Basinl with hole for pillar cock with cast iron/M.S. brackets painted white including cutting holes in walls and making good to the damages etc all complete as per specification and direction of Engineer-in-charge. |
| 74 | Fixing pedestal for wash basin complete recessed at the back for the reception of pipes and fittings |
| 75 | Supplying of all materials,labour,T&P for fixing Fixing wash kitchen sink conforming to IS 2556 : Part 5-1994 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification.as per specification and direction of Engineer-in-charge.Stainless steel kitchen sink - without drain board 600x450 mm bowl depth 200 mm (Parry Ware) |
| 76 | Supplying and transporting Water Filter Machine as per specification etc |
| 77 | Supplying all labour and T&P for cleaning the man hole chamber etc complete. |
| 78 | Supplying all labour and T&P for cleaning the Sewer line etc complete. |
| 79 | Supplying all labour and T&P for cleaning the Septic tank etc complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender