Tender For Redevelopment And Beautification Works Of Bhimtal Lake At Bhimtal, Distt. Nainital
Tender Value
17.42 Crore
Estimated cost
Bid Submission
21 Jul 2026
15 days left
EMD
34.84 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nainital → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Redevelopment And Beautification Works Of Bhimtal Lake At Bhimtal, Distt. Nainital
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation for retaining, breast walls etc, in all types of soils and rocks including all lead, lift and disposal of surplus material as per direction of engineer - in - charge, as per drawing and technical specifications Clause 305.1 of MORD Specifiction |
| 2 | Hand Packed stone filling in back of wallls including cost of all materials, royality, T&P etc. complete as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications) |
| 3 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201.In area of thorny jungle |
| 4 | Compacting original ground supporting subgrade Loosening of the ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per Technical Specification Clause 303.5.2. |
| 5 | Concrete with cement, coarse sand and 40 mm gauge stone ballast in proportion 1:4:8 in foundations and floors including supply of all material, labour and T&P etc. required for proper completion of the work. as per drawings and technical specifications Clause 802, 803, 1202 & 1203 |
| 6 | Cast in Situ Cement Concrete M 20 Kerb with Channel (Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 50 mm thick in PCC M20 grade, sloped towards the kerb, kerb stone with channel laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408) PCC M20 for Kerb (Cast in Situ) |
| 7 | Providing and fixing of Cast Iron Railings complete in all aspects as per directions of Engineer-in-Charge |
| 8 | Providing & fixing Cobble Stone Cutting/dressing /Fixing supply and fxing Galaxy White and Steel Grey Wings Mix Pattern edges machine Cut with Installation Size: 80-100x80-100x40-75mm Approx complete in all aspects as per directions of Engineer-in-Charge |
| 9 | Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick Jamuna sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge. |
| 10 | Providing & laying of Selection no. 1 Doob grass turf with earth 50mm to60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same and maintenance for 30 days or more till the grass establish properly, as per direction of the officer-in-charge. |
| 11 | Providing concrete for plain/ reinforced concrete in open foundations complete asper drawings and technical specifications Clause 802, 803, 1202 & 1203 P.C.C. grade M 20 Nominal mix (1:2:4) |
| 12 | Providing PCC M-20 architectural coping on the top of wing wall, return wall etc.complete as per drawing and technical specification Clauses 615, 710 and 1204.3.11 |
| 13 | Cement plum Masonry with 40% plum & 60% 1:3:6 cement concreteincluding supply of all material, labour, T&P etc. required for propercompletion of the work. as per drawings and technical specifications Clause 802, 803, 1202 & 1203 of MORD Specifiction: in foundation |
| 14 | Stone masonry in cement mortar for superstructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204. Course rubble masonry (1st sort) In 1:4 cement mortar |
| 15 | Pointing with cement mortar (1:3) as per drawing and technical specification Clauses 613.3 and 1204 |
| 16 | Painting Two Coats on New Concrete Surfaces Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and Technical Specification Clause 1701 |
| 17 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. i) For thickness of tiles 10 mm to 25 mm |
| 18 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 19 | Dismantling steel work manually/by mechanical means in built up sections without dismembering and stacking with in 50 metres lead as per direction of Engineer -in-charge |
| 20 | 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush.ii) White sand stone |
| 21 | Providing & laying of kaddapa stone flooring over 150mm (average) thick base of cement mortar 1:3:6 (1 cement : 3 coarse sand : 6 aggregate) with joints finished flush. |
| 22 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. ii) Granite stone slab of colour black, Cherry/Ruby red:a) Area of slab over 0.50 sqm |
| 23 | Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in Charge: |
| 24 | Providing and fixing flat pressed three layer particle or graded plain wood board medium density exterior grade (Grade |) FPT-I, conforming and marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately):ii) 18 mm thick |
| 25 | Supplying and fixing of 3 Tab & Laminated Asphalt Roofing Shingles sheet including all labor & material complete in all respects as per direction given by engineer in charge. |
| 26 | Providing and fixing exterior grade High Pressure Laminate (HPL) panels of 6mm/8mm thickness (UV-resistant and weatherproof), of approved brand, design, and shade, fixed on extruded aluminium sub-structure using stainless steel rivets, cleats, brackets and other approved accessories, including preparation of surface, joint sealing with silicone sealant, making necessary cutouts and edge finishing, complete in all respects. The HPL sheets shall conform to EN 438 Part 6 (Exterior grade) or equivalent and shall be resistant to UV, moisture, impact, and delamination. The aluminium framework shall be pre-treated and powder coated (minimum 60 microns), fixed on the masonry or RCC surface using SS fasteners or anchor bolts. Work to be executed as per manufacturer’s specifications and as directed by Engineer-in-Charge.Specifications:1. HPL Sheet: 6/8 mm thick, exterior grade (EN 438-6 Type EDF).2. Aluminium Section: 25x25x2 mm or as approved, pre-treated and powder coated.3. Fixing Hardware: SS 304 rivets, cleats, anchor fasteners.4. Joint Sealing: Weather-grade silicone sealant.5. Expansion gap: 8–10 mm between panels. |
| 27 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 28 | Painting Steel work with Deluxe Multi Surface Paint to give aneven shade. Two or more coat applied @ 0.90 ltr/10 sqm overan under coat of primer applied @ 0.80 ltr/10 sqm of approvedbrand and manufacture |
| 29 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete. |
| 30 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm overand including priming coat of exterior primer applied @ 0.90litre/10 sqm) |
| 31 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: i) Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 32 | Horticulture operations including 300 mm earth filling, grassing, tree plantations/shrubs and potted plants etc. |
| 33 | Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: Channels, angles, tees and flats |
| 34 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 35 | Providing and fixing precast cement concrete decorative baluster of approved design, shape, and pattern, cast in M25 grade concrete with 10mm and down graded stone aggregate, including necessary centering, shuttering, curing, finishing with cement slurry/punning, and fixing in position with cement mortar 1:3 (1 cement : 3 coarse sand), including reinforcement (if required), all complete as per architectural drawing and direction of Engineer-in-Charge. The baluster shall be set true to line, level, and plumb. Cost includes formwork, curing, transportation, hoisting, and all incidental charges, but excluding the cost of base railings or coping. |
| 36 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos.2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) |
| 37 | Dismantling of Cement Concrete Pavements as per Technical Specification Clause202. Dismantling of cement concrete pavements by mechanical means using pneumatictools breaking to pieces not exceeding 0.02 Cum in volume and stock piling atdesignated locations and disposal of dismantled materials upto a lead of 1000 m,stacking serviceable and unserviceable materials separately |
| 38 | Supplying, fitting and placing HYSD bar reinforcement in foundation complete as perdrawings and technical specifications Clauses 1000 and 1202 |
| 39 | Cement Concrete Pavement Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 Cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowelbars, near approaches to bridge/culvert and construction joints, admixtures asapproved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and TechnicalSpecification Clause 1501 |
| 40 | Direction and Place Identification Signs upto 0.9 sqm Size Board. Providing and erecting direction and place identification retroreflectorised sign as per IRC :67 made of Type XI retro- reflective sheeting, vide clause 801.3, fixed over Aluminium composite materialsheet with overall thickness of 4mm with area not exceeding 0.9 sqmfixed over back support frame of min 35 x 35 x 3mm Angle mounted ona mild steel circular pipe 65 NB, firmly fixed to the ground by means ofproperly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing. |
| 41 | Painting lines, Dashes, Arrows, etc. on Road in Two Coats on New Work Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702 |
| 42 | Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts |
| 43 | Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation. |
| 44 | Supplying and stacking of Good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment)only in Lawn area |
| 45 | Carriage of Material by Mechanical Transport including loading, Unloading and stacking (upto 5 km lead) |
| 46 | Supplying and spreading of sand in lawn area, including watering, and dressing complete. |
| 47 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge |
| 48 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately) |
| 49 | Providing and stacking of Mangifera indica (Mango-grafted ) of height 60-75 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 50 | Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm.in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 51 | Providing and stacking of Ficus benjamina (green) of height 120-135 cm.with 6-8 branches and lush green foliage in g. bags of size 25 cm as perdirection of the officer-in-charge. |
| 52 | Providing and stacking of Grevillea robusta (Silver Oak) of height 150-165cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 53 | Providing and stacking of Bauhinia blakeana (Kachnar) of height 120-150cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 54 | Providing and stacking of Bottle palm of ht. 270-300 cm bottom girth 40-50cm well developed in big HDPE bags as per direction of the officer-in-charge. |
| 55 | Providing and stacking of Cassia siamea of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge. |
| 56 | Providing and stacking of Polyalthia pendula (Ashok Pendula) of height 80-195 cm. in gunny bag of size 30 cm as per direction of theofficer-in-charge. |
| 57 | Providing and displaying of Areca Palm having ht. 2.40 m to 2.70 m with 12to 14 suckers, well developed, fresh and healthy with lush green foliage in 35 cm size of Bucket type cement pots & as per direction of the officer-in-charge. |
| 58 | Providing and Mixing Organic Manure/ Vermicompost For Lawn and flower Beds @ 5 kg Per sqm in Lawn area and 8 Kg in Bed area |
| 59 | Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.and as per direction of officer-in-charge |
| 60 | Providing and Displaying Cycus revoluta in 35 cm challi, specimen , having 30 to 40 with fresh and healthy, leaves having 25cm to 30cm circumfrance of base stem well developed as per direction of the officer-in-charge. |
| 61 | Providing and Displaying Cycus revoluta specimen , having 45 to 50 fresh and healthy, leaves having 30cm to 35cm circumfrance of base stem well developed in 40 cm challi, as per direction of the officer-in-charge. |
| 62 | Providing and Displaying Topiary of Casuarina fresh & healthy having 5 to 6 specific shape and size ball well developed 195 to 210 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. |
| 63 | Providing and stacking of Largerstroemia indica of height 90-105 cm. multibranched in poly bags of size 25 cm as per direction of the officer-in-charge. |
| 64 | Providing and Displaying Cyprus Golden Conical Shape 150 to 165 cm ht., with fresh and healthy Golden colour foliage in 35cm Cement Pot as per direction of the officer-in-charge. |
| 65 | Providing and Displaying Bamboo Buddha valley with fresh & healthy 3 to 4 suckers having 75 to 90 cm ht. in 25 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge |
| 66 | Providing and Displaying Topiary of Casuarina fresh & healthy having 5 to 6 specific shape and size ball well developed 195 to 210 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. |
| 67 | Providing and stacking of Hibiscus variegated of height 45-60 cm. with 3-4 branches and healthy variegated foliage in earthen pots of size 20 cm as per direction of the officer-in-charge. |
| 68 | Providing and stacking of Nerium oleander (kaner) of height 60-75 cm. with 5-6 branches in poly bags of size 25 cm as per direction of the officer-in-charge. |
| 69 | Providing and stacking of Euphorbia pulcherrima (dark red double bracts) well branched of height 60-75 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge |
| 70 | Providing and stacking of Cestrum nocturnum (Raat ki Rani) of height 60- 75 cm. with 4-5 branches in bag of size 25 cm as per direction of the officer-in-charge. |
| 71 | Providing and Displaying of Spathiphyllum (peace lily), having 15 cm to 25 cm ht. blooming stag with fresh & healthy foliage well developed in 15 cm of Earthen pot/plastic pot as per direction of officer-in-charge. |
| 72 | Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Marigold French Hybrid dwarf |
| 73 | Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. |
| 74 | Providing and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in per tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Petunia hybrid |
| 75 | Providing and Displaying Verbena in different colour having 30 to 45 cm ht., well developed with fresh & healthy foliage in bloom condition in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 76 | Bush Rose in different colour 2 to 3 healthy branch 30 cm and above ht. well developed with 8 or more flowers / flower buds in 20 cm Earthen pot / Plastic pot as per direction of the officer-in-charge. D.S.R. 4.91 |
| 77 | Providing and Displaying Dianthus dwarf in different colour fresh & healthy bloom in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge |
| 78 | Providing and stacking Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara,Mohan,Scarlet Queen, Variegated, Glabra Formosa, Peruviana Odissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. |
| 79 | Providing and stacking of Ipomoea purpurea (Morning glory) of height30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. |
| 80 | Providing and stacking of Quisqualis indicia of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. |
| 81 | Providing and stacking of Jasmine grandiflorum (chameli) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. |
| 82 | Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty shape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. |
| 83 | Providing and stacking of Clerodendrum inerme having ht. 25 cm to 30 cm multi branched in 20 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. |
| 84 | Jasminum grandiflorum (chameli) of height 30 cm to 45 cm. in 20 cm size of Earthen pot/Plastic pot. |
| 85 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) Holes 60 cm dia, and 60 cm deep |
| 86 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) Holes 45 cm dia, and 45 cm deep |
| 87 | Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of officer in charge |
| 88 | Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing,weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge.Total qty for 24 Months ( 02 Years) (62740.56 x 24 Months) = 1505773.41 |
| 89 | Supplying and fixing Unbranded Cast Iron Polish Garden Bench, Capacity 3 Seater as per site and direction of officer incharge including all labor & material complete in all respects as per direction given by engineer in charge. |
| 90 | Supplying and fixing G.M DUSTBIN Outdoor Twin Waste Bins, of capacity 120 as per site and direction of officer incharge including all labor & material complete in all respects as per direction given by engineer in charge. |
| 91 | Providing and fixing of 10 W Garden spike lights in garden including all labour as per direction given by engineer in charge. |
| 92 | Supplying and fixing of stone bench under direction of officer incharge including all labour & complete in all respects as per direction given by engineer incharge. |
| 93 | Providing, supplying, transporting, assembling and installing modular floating pontoon system comprising UV-stabilized rotationally moulded virgin HDPE float modules filled with closed-cell EPS foam for positive buoyancy, complete with interlocking connectors, hot-dip galvanized steel/aluminium structural framing, stainless steel fasteners, anchoring and mooring arrangements, guide piles/anchor blocks, connection hardware and all necessary accessories, labour, equipment, testing and commissioning complete in all respects as per approved drawings, specifications and directions of the Engineer-in-Charge. |
| 94 | Electrical Works Supplying and fixing of entrance glow sign board under direction of officer incharge including all labour & complete in all respects as per direction given by engineer incharge. |
| 95 | Supplying and laying 1.1kV grade 4C x 35 sq.mm Aluminium armoured XLPE cable direct in ground including excavation, sand cushioning, protection and refilling complete. |
| 96 | Supplying and laying 1.1kV grade 4C x 16 sq.mm Aluminium armoured XLPE cable direct in ground complete. |
| 97 | Providing and fixing PVC conduit 25/32mm with accessories in ground/surface complete. |
| 98 | Supplying and laying FRLS copper cable 2C x 2.5 sq.mm in PVC conduit for bollard circuits complete. |
| 99 | Supplying and laying FRLS copper cable 2C x 1.5 sq.mm in PVC conduit for spike circuits complete. |
| 100 | Supplying and installing outdoor feeder pillar with MCCB, MCBs, contactor, astronomical timer and SPD complete. |
| 101 | Earthing with GI pipe electrode complete with chamber and accessories. |
| 102 | Providing and fixing 6 SWG GI earth wire complete. |
| 103 | Supplying, erection and commissioning of 4 m height Solar integrated LED street light 30W complete with LiFePO4 battery, MPPT controller, panel, pole foundation and all accessories complete as per drawing/design provided by the engineer incharge. |
| 104 | Supplying and fixing of Hanging tube lights under direction of officer incharge including all labour & complete in all respects as per direction given by engineer incharge. |
| 105 | Supplying of water cooler including all labour as per direction given by engineer in charge. |
| 106 | Providing and fixing of bollard lights in garden including all labour as per direction given by engineer in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender