Tender For Reconstruction Of Shiv Temple At Chittergul Anantnag
Tender Value
31.71 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
1 days left
EMD
63438
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Reconstruction Of Shiv Temple At Chittergul Anantnag
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil : |
| 2 | P/L Stone solling of Specified size duely hand packed incl. all carriages and loading/unloading |
| 3 | P/L in position cement concrete in 1:4:8 (1 cement : 4 coarse sand : 8 graded crushed stone aggregate,40mm nominal size) excluding the cost of centering and shuttering complete job. |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm |
| 5 | Providing and Laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:2:4 mix. |
| 6 | Reinforcement for RCC work incld straightning, cutting, bending, placing in position & binding all complete (Thermo-mechanically treated bars) |
| 7 | Centering and shuttering including strutting, propping etc. and removal of the same for foundatons above plinth level |
| 8 | Brick work with FPS bricks 75 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand) with Extra for brickwork in super structure above plinth upto floor V level including all costs and carriages (including cost of all material, leads, lifts and carriages etc upto site of work complete). |
| 9 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Imported Wood |
| 10 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows Fixing with but hinges of required size with necessary screws excluding panelling which will be paid separately all complete as per site incharge shutters 30 mm to 35 mm thick. Imported Wood |
| 11 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 35 mm thick. Decorative ply wood both sides decorative veneer type i confirming to is 1328 BWR type |
| 12 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 10 kg/sqm (3-4mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt· shutters in mm per sqm hinges bright finished of required size with necessary screws..30-35 mm Imported Wood |
| 13 | Providing and fixing wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows withhinges and necessary screws( 30-35 mm Imported wood) |
| 14 | Steel work welded in MS Grills, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required. MS Grills for windows fixed to wooden frames |
| 15 | P/F of aluminium tower bolts ISI marked as per IS 1868 transparent or dyed to reqd. colour with necessary screws etc complete job 100x10 mm |
| 16 | P/F of aluminium tower bolts ISI marked as per IS 1868 transparent or dyed to reqd. colour with necessary screws etc complete job 150x10 mm |
| 17 | P/F of aluminium handles ISI marked as per IS 1868 transparent or dyed to reqd. colour with necessary screws etc complete job 125 mm |
| 18 | P/F of aluminium handles ISI marked as per IS 1868 transparent or dyed to reqd. colour with necessary screws etc complete job 100 mm |
| 19 | Stay/I hooks for window shutter |
| 20 | Providing and fixing bright finished brass ornamental mortice latch and lock, ISI marked, with six levers and a pair of anodized (anodic coating not less than grade AC 10 as per IS : 1868) aluminum lever handles of approved quality with necessary screws etc. complete |
| 21 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size). |
| 22 | 12 mm thick cement plaster of 1:4 mix (1 cement : 4 find sand mortar) |
| 23 | Providing and applying Wall putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 24 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 25 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 26 | Pointing on brick work with lime Surkhi with 1:1 ( 1 lime : 1 Surkhi) lime Surkhi mortar on fair side of brick masonry /concert walls up to floor VI level including finishing even and smooth to give a local heritage touch as per the directions of Consultant/Engineer incharge upto deseried height complete in all respects. (Including all lead, lift, labour, materials, tools, plants complete as per specification and as directed by Engineer in Charge.) |
| 27 | Painting with synthetic enamel paint of app. Brand and manufacture two or more coats applied incl. priming coat |
| 28 | P/F of 12 mm thick panelling over 10 mm thick (finished) ply wood i/c framework of imported wood i/c all necessary fastners/ Beading 50*50mm i/c P/A Spirit wood polish over prepared surface after applying sandpapering , applying sealer i/c cornices complete job ist class imported wood |
| 29 | P/F of imported wood ornamental eves board (300x25 ) mm i/c primer , paint i/c framework i/c P/A spirit wood polish over prepared surface after applying sand papering , applying sealer complete job |
| 30 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face within cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed. Rough chisel dressed (including cost of all material, leads, lifts and carriages etc upto site of work complete). 60km |
| 31 | Providing and fixing of 25 mm devri stone tiles cladding complete in cement mortar 1: 6 (1 Lime: 6 coarse sand) as per approved drawings (including cost of all material, leads, lifts and carriages etc upto site of work complete). 60km |
| 32 | Providing hoisting and fixing trusses/purlins/rafters/posts/post like components including cost of screws te. Complete in ist class imported wood |
| 33 | Providing colour coated high rib profile sheet roofing of approved brand & manufacture, including ridges/ hips,valleys 600mm overall width coloured sheets with necessary fittings fixed with polymer coated steel screws bolts 100 mm long 8 mm dia with washers & plc. cap (upon a pitch of 60 degrees) excluding the cost of purlins, rafters and trusses (0.50mm thick) |
| 34 | Providing and fixing of Pinjra Kari Heritage type work as per approved pattern / design of 1st class Kashmiri local budloo wood complete job including Sprit polish, Beading & necessary nails. (including cost of all material, leads, lifts and carriages etc upto site of work complete) |
| 35 | Providing and fixing of 4.0mm mm thick clear glass panes including beading & necessary nails complete. |
| 36 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 37 | Carriage of different items by machanical transport including loading/unloading.aggregates for an average lead of 30 Kms and by manual means for an average HL of 100 metres. |
| 38 | Manufacturing supplying and fixing stainless steel overhead signage boards made up of 2mm thick Stainless steel sheet as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 and fixing the same to the plate of structural frame work of stainless steel by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including S.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). |
| 39 | Providing. and fixing of foundation stone with pedestal and lnauguration stone with necessary writtings ind curtains with curtain rods and other necessary andllary items required at site as directed by engineer lncharge at site(foundation and inaugratlon comprises of two jobs) |
| 40 | Part (B) Walling Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil : |
| 41 | P/L Stone solling of Specified size duely hand packed incl. all carriages and loading/unloading. |
| 42 | P/L in position cement concrete in 1:4:8 (1 cement : 4 coarse sand : 8 graded crushed stone aggregate,40mm nominal size) excluding the cost of centering and shuttering complete job. |
| 43 | Providing and Laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:2:4 mix. |
| 44 | Brick work with FPS bricks 75 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand) with Extra for brickwork in super structure above plinth upto floor V level including all costs and carriage by M T and HL |
| 45 | Finishing walls with water proofing cement paint of required shade two or more coats applied on old work exterior paint (3.84kg/sqm) |
| 46 | Centering and shuttering including strutting, propping etc. and removal of the same for foundatons above plinth level |
| 47 | P/L of 50 mm thick Cement Concrete Flooring/Coping in 1:2:4 mix. |
| 48 | Back filling behind walls by way of granular material/Nallah muck including all costs and carraiges |
| 49 | Structural steel work in built up section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 50 | Painting with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on new work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. |
| 51 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face within cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. two face dressed. Fine chisel dressed (including cost of all material, leads, lifts and carriages etc upto site of work complete). 60km |
| 52 | Carriage of different items by machanical transport including loading/unloading.aggregates for an average lead of 30 Kms and by manual means for an average HL of 100 metres. |
| 53 | Part C Toilet Block Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil |
| 54 | Providing & Laying of 150 mm nominal size stone soling (dully hand packed)including watering dressing and ramming with all carriages loading un-loading and stacking etc complete. |
| 55 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40mm nominal size crushed stone agg.) |
| 56 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:2:4 coarse sand 20mm nominal size crushed stone agg.) |
| 57 | Brick work with FPS bricks of class designation in superstructure in cement mortar 1:6 (1 cement, 6 coarse sand) including all carriage of materials . |
| 58 | Providing and laying in position specified grade of Reinforced cement concrete including curing but excluding cost of centering and shuttering ,finishing and reinforcement .All works upto plinth level in 1:1/2:3 with 20mm nominal size of stone aggregates. |
| 59 | Reinforced cement conc. Work in beams, suspended floors roofs having slope upto 15 deg. Landing balconies, shelves, lintels upto floor 5 level excld. Centring, shuttering in 1:1.5:3 with 20mm nominal size of crushed stone agg. |
| 60 | Reinforcement for RCC work incld straightning, cutting, bending, placing in position & binding all complete (Thermo-mechanically treated bars) |
| 61 | Structural steel welded in built up sections trusses and framed work incld cutting hoisting fixing in positon and applying a priminng coat of approved steel primer all complete /Painting |
| 62 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade. |
| 63 | Providing and laying Ceramic glazed floor tiles 500x500 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown |
| 64 | 12 mm Cement Plaster of mix 1:4(1 cement:4 coarse sand). |
| 65 | Providing and applying Plaster of Paris putty/Wall putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete incld Water primer complete job |
| 66 | Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade |
| 67 | Centring and shuttering incld. Strutting, proping etc & removal of form work for Founadtions, footings, bases of columns for mass concrete |
| 68 | Centring and shuttering incld. Strutting, proping etc & removal of form work for suspended floors, roofs, landings, balconies & access plateform |
| 69 | Providing and fixing soil waste pipes incld all fixtures and joints like collor , plain bend ,Door tee , Door bend 100mm dia PVC B Class |
| 70 | Providing and fixing vent pipes incld all fixtures and joints like collor , plain bend ,Door tee , Door bend 75 mm dia PVC B Class |
| 71 | Providing and fixing C.P /Stainless steel anticockroach trap (grating on floor trap and floor drain with cement mortor complete 100mm dia |
| 72 | Providing and fixing floor trap . |
| 73 | Providing and fixing PPR Pipes complete with fittings including all necessary fittings like Sockets, Tee, Reducer etc 25 mm dia nominal bore |
| 74 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid. |
| 75 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 76 | Stain less steel Bib cock . |
| 77 | Stain less steel angle valve |
| 78 | PVC connections |
| 79 | Dry rubble masonry with hard stone in foundation & plinth using local quarry stone. |
| 80 | Construction of cement concrete manhole in mix 1:2:4 having 9'' wall thickness of required size including cement concrete flooring plastering and man hole cover of required size with frame |
| 81 | Providing and fixing of 50 mm dia stainless steel railing of 304 grade of hallow tube 1.6mm thicl jindal/salem make or equivalent including welding and fixing with stainless steel machine screws for making required size and shape buffing etc.complete and fixing stainless steel balusters upto 900 mm height newel post 1050 not less than 1050 mm ss tubes 3 in one installed horizontally includind cuttng welding grinding to required shape and size by required steel dash fasterners nuts bolts screws incld king post whereever required etc.. |
| 82 | Carriage of materails By Mech.Transport, from source to site of work Stone agg. from for an avg lead of 30 kmby manual means for an average HL of 100 metres. |
| 83 | Sand for an avg lead of 30 kms by manual means for an average HL of 100 metres. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender