Tender For Construction Of Pantry And Attached Washroom Adjacent To Chairpersons Room And Renovation Of Gents Washroom Including Toilets For Pwd And Renovation Of Gents Toilet Of Ground Floor In The Department Of Geography, Panjab University, Sector-
Tender Value
23.99 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
17 days left
EMD
48000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Pantry And Attached Washroom Adjacent To Chairpersons Room And Renovation Of Gents Washroom Including Toilets For Pwd And Renovation Of Gents Toilet Of Ground Floor In The Department Of Geography, Panjab University, Sector-14, Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | Public Health Work |
| 2 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 5 km for all lifts, complete as per directions of Engineer-in-charge. (Ref:- 1.1.18) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 4 | 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) (Ref:- 4.1.3) |
| 5 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement : |
| 6 | 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) (Ref:- 5.2.3) |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 8 | Suspended floors, roofs, landings, balconies and access platform.(Ref:- 5.9.3) |
| 9 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. |
| 10 | TMT bar 10 mm dia (Ref:- 5.22.6) |
| 11 | Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sils, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. Complete at all levels. |
| 12 | Granite of any colour and shade |
| 13 | Area of slab over 0.50 sqm. (Ref:- 8.2.2.2) |
| 14 | Extra for providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 15 | Granite work.(Ref:- 8.3.2) |
| 16 | 12 mm cement plaster of mix : |
| 17 | 1:6 (1 cement: 6 fine sand)(Ref:- 13.1.2) |
| 18 | Distempering with oil bound washable distemper of approved brand and manufacture to given an even shade |
| 19 | New work (two or more coats) over and including priming coat with cement primer. (Ref:- 13.41.1) |
| 20 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (Ref:-13.80) |
| 21 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 22 | 1:4:8 or leaner mix(Ref:- 15.2.) |
| 23 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge |
| 24 | In cement mortar (Ref:- 15.7.4) |
| 25 | Dismantling G.I pipes (external work) including excavation and refilling trenches after taking out the pipes maually / by machincal means including stacking of pipes with in 50 metres lead as per direction of Engineer - in charge: |
| 26 | 15 mm to 40 mm nominal bore(Ref:- 15.44.1) |
| 27 | Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: |
| 28 | Up to 150 mm diameter wash room (Gents) (Ref:- 15.45.1) |
| 29 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres (Ref:- 15.56) |
| 30 | Dismantling stone slab flooring laid in cement mortar including stacking of servicable material and disposal of unserviceable material with in 50 metre lead. (Ref:- 15.25) |
| 31 | Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead: |
| 32 | Thickness up to 40 mm (Ref:- 15.40.1) |
| 33 | Providing And Fixing white vitreous chinaware pedestal type water closet (European type W.C.pan ) with seat and lid, 10 litre low level white P.V.C flushing cistern with manually controlled device ( handle lever), conforming to IS: 7231, with all fittings and fixtures complete including cuting and making good the walls and floors wherever required: |
| 34 | W.C. pan with ISI marked white solid plastic seat and lid(Ref:- 17.2.1) |
| 35 | Providing and fixing toilet paper holder: |
| 36 | CP Brass (Ref:- 17.34.1) |
| 37 | Providing and fixing white vitreous china flat black half stall urnial of size 580 x380x350mm with white PVC automatic flushing cistren, with fitting standrad size C.P. brass flush pipe , spreaderes with unions and clamps (all in C.P. brass) with waste fitting as per Is :2556, C.I trap with outlet grating and other couping in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required |
| 38 | Single half stall urinal with 5 litre P.V.C automatic cistern(Ref:- 17.5.1) |
| 39 | Providing and fixing Stainless steel AISI 304 (18/8) kitchen sink as per Is 13983 with C.I brackets and stainless steel plug 40mm including of fittings and brackets , cutting and making good the walls where ever required: |
| 40 | Kitchen sink without drain board |
| 41 | 610 x460mm bowl depth 200mm (Ref:- 17.10.2.2) |
| 42 | Providing and fixing soil, waste and vent pipes |
| 43 | 100 mm dia. |
| 44 | Centrifugally cast (spun) iron socketed pipe as per IS:3989. (Ref:- 17.35.1.2) |
| 45 | Providing and fixing soil, waste and vent pipes |
| 46 | 75 mm dia. |
| 47 | Centrifugally cast (spun) iron socketed pipe as per IS:3989. (Ref:- 17.35.2.2) |
| 48 | Providing and fixing plain bend of required degree. |
| 49 | 100 mm |
| 50 | sand cast iron S& S as per IS-3989 (Ref:- 17.39.1.2) |
| 51 | Providing and fixing collar: |
| 52 | 100 mm |
| 53 | sand cast iron S&S as per IS-3989 (Ref:- 17.57.1.1) |
| 54 | Providing and fixing collar: |
| 55 | 75 mm |
| 56 | Sand cast iron S&S as per IS - 3989 (Ref:- 17.57.2.1) |
| 57 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: |
| 58 | 100mm (Ref:- 17.58.1) |
| 59 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter: |
| 60 | 75mm (Ref:- 17.58.2) |
| 61 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 62 | 100 mm inlet and 75 mm outlet |
| 63 | Sand cast iron S&S as per IS - 3989 (Ref:- 17.60.1.1) |
| 64 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : |
| 65 | 15 mm dia nominal bore (Ref:- 18.11.1) |
| 66 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : |
| 67 | 20 mm dia nominal bore (Ref:- 18.11.2) |
| 68 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.(external work): |
| 69 | 25 mm dia nominal bore (Ref:- 18.12.3) |
| 70 | Providing and fixing G.I. Union in existing G.I. pipe line,cutting and threading the pipe and making long screws inclding excavation, refilling the earth or cutting of wall and making good the same complete wherever required: |
| 71 | 15 mm nominal bore. (Ref:- 18.47.1) |
| 72 | Providing and fixing G.I. Union in existing G.I. pipe line,cutting and threading the pipe and making long screws inclding excavation, refilling the earth or cutting of wall and making good the same complete wherever required: |
| 73 | 20 mm nominal bore. (Ref:- 18.47.2) |
| 74 | Providing and fixing G.I. Union in existing G.I. pipe line,cutting and threading the pipe and making long screws inclding excavation, refilling the earth or cutting of wall and making good the same complete wherever required: |
| 75 | 25 mm dia bore (Ref:- 18.47.3) |
| 76 | Cutting holes up to 30x30 cm in walls including making good the same: |
| 77 | With F.P.S. bricks (Ref:- 18.76.1) |
| 78 | Providing and fixing uplasticised PVC connection pipe with brass C.P. Nuts collar and bush of approved quality colour. |
| 79 | 45cm length |
| 80 | 15 mm nominal bore (Ref:- 18.21.2.1) |
| 81 | Providing and fixing C.P. brass Angle valve for basin/geyser/urinals etc. including SS flange. Complete in all respect to the entire satisfaction of the engineer in-charge. |
| 82 | 15 mm nominal bore (Ref:- 18.53.1) |
| 83 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms |
| 84 | 15 mm nominal bore (Ref:- 18.51.1) |
| 85 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 86 | 20 mm nominal bore (Ref:- 18.17.1A) |
| 87 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 88 | 25 mm dia bore (Ref:- 18.17.1) |
| 89 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc.complete: |
| 90 | 25 to 40 mm Nominal bore(Ref:- 18.13.1) |
| 91 | Providing and fixing C.P. brass stop cock (concealed) with caps including SS flange. Complete in all respect to the entire satisfaction of the engineer in-charge. |
| 92 | 15 mm nominal bore (Ref:- 18.52.1) |
| 93 | Providing and fixing aluminium work for doors, windows , ventilators and partions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and sce=rews or with fixing clips , or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with requried PVC/ neoprene felt etc. Aluminium snap b;eading for glazing / panelling C.P. brass / stainless steel screws , all complete as per architctural drawings and the direcstsions of Engineer-in -charge. (Glazing and panelling to be paid for separtely): |
| 94 | For fixed portion |
| 95 | Powder coated aluminium (minimum thickness of powder coating 50 micron) 10 Gauge(Ref:- 21.1.1.2) |
| 96 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) : |
| 97 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). |
| 98 | Powder coated aluminium (minimum thickness of powder coating 50 micron) 10 guage (Ref:- 21.1.2.2) |
| 99 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):. |
| 100 | With float glass panes of 5mm thickness.(Ref:- 21.3.2) |
| 101 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand ) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : |
| 102 | For pipes 100 to 250 mm diameter (Ref:- 19.21.1) |
| 103 | Providing and fixing square mouth S.W. gully trap grade 'A' complete with C.I. grating brick masonry chamber with water tight RCC cover with frame of 300x300mm size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design: |
| 104 | 100x100 mm size P type |
| 105 | With F.P.S. Bricks class designation 75 (Ref:- 19.4.1.1) |
| 106 | Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design: |
| 107 | Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : |
| 108 | With common burnt clay F.P.S.(non modular) bricks of class designation 10 (Ref:- 19.7.2.1) |
| 109 | Providing and fixing C.P. towel Ring complete with PVC rawl plug and CP Brass screws with concealed fittings of approved quality and colour.Complete in all respect to the entire satisfaction of the engineer-in-charge. (Ref:- N.S.) |
| 110 | Providing & Laying Half Brick masonry work with F.P.S. bricks of class designation 100 in superstructure above plinth level upto floor V level. complete in all respect to the satisfaction of the engineer in charge. |
| 111 | Cement Mortar 1:4 (1cement :4 coarse sand) (Ref:- N.S.) |
| 112 | Providing and fixing 3mm thick bakelite sheet of approved brand by engineer-in-charge at site. The sheet is to be used in panelling work for aluminium door/winow/shutter and partition fixed in position with C.P. brass screw or EPDM gasket etc. Complete in all respect to the entire satisfaction of the engineer-in-charge. (Ref:- N.S.) |
| 113 | P/F of PD-Doors system, Model type-PD-Door Nylon, size-750mm(W)x1830mm(H) , overal Height of cubicle:1980mm(including bottom Gap of 150mm). Thickeness of campact laminate :12mm with complete accessories:(Ref:- N.S.) |
| 114 | P/Fixing chinaware (without padestal) type wash basin of size:22\\"x16\\" chinaware with 32mm dia C.P. waste . Complete in all respect to the entire satisfaction of the engineer in charge. (Ref:- N.S.) |
| 115 | P/Fixing the 25mm dia stainless steel pipe in any shape (at any level) in vertical/ Horizontal position of 835mm long in size to be fixed as per site with necessary CP brass screws and rawl plugs. Complete in all respect to the entire satisfaction of the engineer in charge.(Ref:- N.S.) |
| 116 | Providing & Fixing the 25mm dia stainless steel pipe in any shape (at any level) in vertical/ Horizontal position of 780mm long in size to be fixed as per site with necessary C.P. brass screws and rawl plugs. Complete in all respect to the entire satisfaction of the engineer in charge. |
| 117 | wash room and toilets (Ref:- N.S.) |
| 118 | Providing & fixing prepolished/prefinished Wooden vanity cabinet(approved by engineer in charge at site) with pull out drawer and openable shutter along with granite top counter. The cabinet shall have stainless steel hardware. Complete in all respect to the entire satisfaction of the engineer in charge. (Ref:- N.S.) |
| 119 | Providing and fixing 1st quality ceramic glazed wall tiles (8”x12”) (200mmx300mm) conforming to IS: 15622, of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Ref:- N.S.) |
| 120 | Providing and laying Anti skid floor tiles of size 300x300mm of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. (Ref:- N.S.) |
| 121 | Providing and fixing in position 15mm i/d C.P. Brass short body with S.S. flange bib cock, complete in all respect to the entire satisfaction of the engineer-in-charge. |
| 122 | 15 mm nominal bore (Ref:- N.S.) |
| 123 | Providing & fixing Counter top Wash basin size 63x450m of approved make with necessary fittings & two nos. pillar tap. Complete in all respects as per entire satisfaction of the Engineer-in-Charge. (Ref:- N.S.) |
| 124 | Providing & fixing Center Hole mixer of 15mm dia. Complete in all are respects to the entire satisfaction of engineer in charge.(Ref:- N.S.) |
| 125 | Removal of chinaware water closet with fittings. Complete in all respect to the entire satisfaction of the engineer-in-charge. (Ref:- N.S.) |
| 126 | Removal of Washbasin and refixing the same with fittings .Complete in all respect to the entire satisfaction of the engineer in charge.(Ref:- N.S.) |
| 127 | Removal of Urinal with fittings.Complete in all respects to the entire satisfaction of the engineer- in charge(Ref:- N.S.) |
| 128 | Providing and fixing C.P. Brass Bottle Trap for Wash basin and sink.(Ref:- N.S.) |
| 129 | Providing and fixing C.P. Stainless steel fitting heavy duty ISI marked. (Ref:- N.S.) |
| 130 | Tower bolt 8\\" long |
| 131 | Tower bolt 6\\" long |
| 132 | Handle 5\\" D-type |
| 133 | Hinges 5\\" |
| 134 | Providing and fixing Hydraulic door closer with logo printed along with necessary fittings. Complete in all respect to the entire satisfaction of the engineer in charge. (Ref:- N.S.) |
| 135 | Providing and fixing 32mm dia G.I. waste pipe along with elbow or bend. complete in all respect to the entire satisfaction of the engineer-in-charge.(Ref:- N.S.) |
| 136 | Providing & making 6mm thick looking mirror to be fixed on 6mm thick BWP(water proof) ply along with 2\\"x1\\" Teak wood beading duly polished. Complete in all respects to the entire satisfaction of the engineer in-charge. (Ref:- N.S.) |
| 137 | Providing & laying P.C.C. 1:8:16 (1 Cement : 8 coarse sand: 16 coarse aggregate)with stone ballast 32mm guage in foundation and plinth. Complete in all respect to the entire satisfaction of the Engineer-in-charge. (Ref:- N.S.) |
| 138 | Providing and fixing in position 15mm dia CP Brass nipple(1\\" to 2\\" long) to various fittings. Complete in all respect to the entire satisfaction of the engineer-in-charge. (Ref:- N.S.) |
| 139 | Providing and fixing Single socketed on wall face unplasticised Rigid UPVC pipe (6 kg per Sqcm pressure) of size 100mm dia conforming to IS : 13592 Type A, including jointing with necessary Tee and Bend conforming to IS : 5382, leaving 10 mm gap for thermal expansion. complete as per entire satisfaction of the Engineer-in-Charge. |
| 140 | 100mm dia(Ref:- N.S.) |
| 141 | Providing and laying Brick work with F.P.S. bricks of class designation 100 (average compressive strength not less than 105 kg per sq.cm.) in Foundation and plinth in : |
| 142 | Cement mortar 1:6(1 cement : 6 coarse sand)(Ref:- N.S.) |
| 143 | Providing & fixing in position food grade double layer polyethylene PVC water storage tank ISI:12701 (at all floor levels) with cover & suitable locking arrangement including necessary holes for inlet, outlet, overflow pipes, tank nipple(2 nos.) etc with tank base(as per site). Complete in all respect to the entire satisfaction to the Engineer-in-charge. (Ref:- N.S.) |
| 144 | Providing and fixing mettalic Liquid soap container. complete in all respect to the entire satisfaction of the engineer in-charge.(Ref:- N.S.) |
| 145 | Providing and fixing Jet connection alongwith 450mm long pipe for water closet. Complete in all respect to the entire satisfaction of the engineer-in-charge.(Ref:- N.S.) |
| 146 | Providing & fixing Chinaware wall hung\\"P\\" trap WC of size 535x375x365mm in white colour with cinita soft close seat cover with concealed twin flush cistern(Chevron) size 500x90x460mm and actuator knob for M-Type flush of Cera Make, complete with jet connection , SS bolt, PCC , plate or flange etc. (Ref:- N.S.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender