Tender For Replacement Of Existing External And Internal Gi Water Supply Pipe Lines With New Cpvc Water Supply Pipe Lines At Amd Office And Residential Complex, Ner, Shillong
Tender Value
66.02 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
10 days left
EMD
1.32 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Khasi Hills → Meghalaya
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Existing External And Internal Gi Water Supply Pipe Lines With New Cpvc Water Supply Pipe Lines At Amd Office And Residential Complex, Ner, Shillong
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 3 | Providing brick work with common burnt clay modular brick of class designation 7.5 in foundation and plinth in : cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 4 | Providing random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand). |
| 5 | Providing 12 mm cement plaster of mix : (1 cement: 4 fine sand) |
| 6 | Dismantling G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer in Internal Work- Exposed on wall : for 15 to 40 mm dia |
| 7 | Dismantling G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer in Internal Work- Exposed on wall : 50mm and above 50mm dia. |
| 8 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 9 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 10 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :In cement mortar |
| 11 | Dismantling tile work in floors and dados laid in cement mortar including stacking the materials within 50 meters lead |
| 12 | Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : Bituminous road |
| 13 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore |
| 14 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : Above 40 mm nominal bore |
| 15 | Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge. |
| 16 | Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres: Up to 150 mm diameter |
| 17 | Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead. |
| 18 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading,transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 19 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes on surface work confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. PN - 16 Pipe, 20mm OD (SDR-7.4) |
| 20 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work,including cutting chases and making good the wall etc. PN - 16 Pipe, 20mm OD (SDR-7.4) |
| 21 | Providing and fixing PPR 20mm Unions |
| 22 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work & External work - Exposed on wall surface :20 mm CPVC nominal dia Pipes |
| 23 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work & External work - Exposed on wall surface :25 mm CPVC nominal dia Pipes |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work & External work - Exposed on wall surface :32 mm CPVC nominal dia Pipes |
| 25 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work & External work - Exposed on wall surface :40 mm CPVC nominal dia Pipes |
| 26 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work & External work - Exposed on wall surface :50 mm CPVC nominal dia Pipes |
| 27 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching upto 75cm depth, refilling & testing of joints complete as per direction of Engineer in Charge. External work (underground) : 40 mm CPVC nominal dia Pipes |
| 28 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching upto 75cm depth, refilling & testing of joints complete as per direction of Engineer in Charge. External work (underground) : 50 mm CPVC nominal dia Pipes |
| 29 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching upto 75cm depth, refilling & testing of joints complete as per direction of Engineer in Charge. External work (underground) : 65 mm CPVC nominal dia Pipes |
| 30 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching upto 75cm depth, refilling & testing of joints complete as per direction of Engineer in Charge. External work (underground) : 80 mm CPVC nominal dia Pipes |
| 31 | Providing and fixing G.I. 50mm dia. Nominal bore pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls Internal work - Exposed on wall |
| 32 | Providing and fixing G.I 80mm dia. Nominal bore pipes complete with G.I fittings including trenching and refilling etc. : External work underground |
| 33 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore GM gate valve |
| 34 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65 mm nominal bore GM gate valve |
| 35 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm nominal bore GM gate valve |
| 36 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : 80 mm nominal bore GM NRV: Horizontal |
| 37 | Providing and fixing gun metal non- return valve of approved quality (screwed end) : 80 mm nominal bore GM NRV: Vertical |
| 38 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter |
| 39 | Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as perIS : 1538 : up to 300 mm dia. |
| 40 | Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead : 100 mm diameter pipe |
| 41 | Supplying pig lead at site of work. |
| 42 | Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 80mm dia. |
| 43 | Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm ominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per tandard design: With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 44 | Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 18.36.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 45 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 46 | Providing 15mm diameter nominal bore CP brass bib cock of approved quality confirming to IS:8931 |
| 47 | Providing and fixing 15mm diameter nominal bore CP stop cock of standard design of approved make confirming to IS:8931 |
| 48 | Providing and fixing C.I. double acting air valve 80mm dia. of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : |
| 49 | Providing and fixing 25mm diameter brass float valve (ball valve) of approved quality, high or low pressure, with plastic ball float and brass arm assembly to automaticaly stop the incoming water into the water tank when the tank is full. |
| 50 | Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks |
| 51 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. |
| 52 | Labour for cutting C.I. pipe with steel saw. 80 mm diameter C.I. pipe |
| 53 | Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. |
| 54 | Providing and laying Ceramic glazed floor tiles of size 300x300mm (thickness to be specified by manufaturer), of 1st quality conforming to IS:15622, of approved make,in all colours, shades, execept white, Ivory, Grey, Fume Red Brown, laid on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @3.3 kg/sq.m including grouting the joints with white cement and matching pigments etc. complete. |
| 55 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shadecomplete. |
| 56 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : (two or more coats) over and including water thinnable priming coat with cement primer |
| 57 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer [email protected] kg/10 sqm) |
| 58 | Providing 100mm soling with stone, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.(Rs.415-12%+18%=430.94) |
| 59 | Providing and fixing 80mm diameter Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work & External work - Exposed on wall |
| 60 | Providing and fixing G.I. 80mm dia. Nominal bore pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls Internal /external work - Exposed on wall |
| 61 | Providing and fixing 32mm diameter brass float valve (ball valve) of approved quality, high pressure, with plastic ball float and brass arm assembly to automaticaaly stop the incoming water into the water tank when the tank is full. |
| 62 | Providing and installation of 15mm CP two way bib cock including 15mm diameter CP Health Faucet of 1.2m length as directed by engineer-incharge etc. complete. |
| 63 | Providing, laying and fixing of 25mm diameter transparent pipe water tank level indicator including providing connection to CPVC pipeline including cost of necessary plain and brass threaded fittings & fixtures and jointing the same with one step cement solvent as directed by engineer-incharge etc.. |
| 64 | Providing, laying and fixing of 80mm diameter Stand Post type Firehydrant, stainless steel body, with one outlet including providing connection to main pipeline inside brick chamber and providing necessary connection to specials including cost of fire hydrant, cost of nut & bolts, insertion rubber, fitting charges, transpotation charges,carriage of materials, taxes etc.. The Firehydrant shall conform to IS code IS:908 and having working pressure of 10-14 kgf/cm2 (The rate does not include the cost of brick chamber, cost of specials like flange/tail pieces/ reducer/unions/short piece which shall be paid under relevant item). |
| 65 | Providing, laying and fixing of CPVC union to CPVC pipeline including cost of necessary plain and brass threaded fittings & fixtures and jointing the same with one step cement solvent as directed by engineer-incharge etc.: 20mm diameter CPVC union (brass threaded) |
| 66 | Providing, laying and fixing of CPVC union to CPVC pipeline including cost of necessary plain and brass threaded fittings & fixtures and jointing the same with one step cement solvent as directed by engineer-incharge etc.: 25mm diameter CPVC union (brass threaded) |
| 67 | Providing, laying and fixing of CPVC union to CPVC pipeline including cost of necessary plain and brass threaded fittings & fixtures and jointing the same with one step cement solvent as directed by engineer-incharge etc.: 32mm diameter CPVC union (brass threaded) |
| 68 | Providing, laying and fixing of CPVC union to CPVC pipeline including cost of necessary plain and brass threaded fittings & fixtures and jointing the same with one step cement solvent as directed by engineer-incharge etc.: 40mm diameter CPVC union (brass threaded) |
| 69 | Providing, laying and fixing of CPVC union to CPVC pipeline including cost of necessary plain and brass threaded fittings & fixtures and jointing the same with one step cement solvent as directed by engineer-incharge etc.: 50mm diameter CPVC union (brass threaded) |
| 70 | Providing, laying and fixing of CPVC union to CPVC pipeline including cost of necessary plain and brass threaded fittings & fixtures and jointing the same with one step cement solvent as directed by engineer-incharge etc.:65mm diameter CPVC union (brass threaded) |
| 71 | Providing, laying and fixing of CPVC union to CPVC pipeline including cost of necessary plain and brass threaded fittings & fixtures and jointing the same with one step cement solvent as directed by engineer-incharge etc.: 80mm diameter CPVC union (brass threaded) |
| 72 | Providing, laying and fixing of CPVC ball valve to CPVC pipeline including cost of necessary plain and brass threaded fittings & fixtures and jointing the same with one step cement solvent as directed by engineer-incharge etc.: 20mm diameter CPVC ball valve (gate valve) |
| 73 | Providing, laying and fixing of CPVC ball valve to CPVC pipeline including cost of necessary plain and brass threaded fittings & fixtures and jointing the same with one step cement solvent as directed by engineer-incharge etc.: 25mm diameter CPVC ball valve (gate valve) |
| 74 | Providing, laying and fixing of CPVC ball valve to CPVC pipeline including cost of necessary plain and brass threaded fittings & fixtures and jointing the same with one step cement solvent as directed by engineer-incharge etc.: 32mm diameter CPVC ball valve (gate valve) |
| 75 | Providing, laying and fixing of CPVC ball valve to CPVC pipeline including cost of necessary plain and brass threaded fittings & fixtures and jointing the same with one step cement solvent as directed by engineer-incharge etc.: 40mm diameter CPVC ball valve (gate valve) |
| 76 | Providing, laying and fixing of CPVC ball valve to CPVC pipeline including cost of necessary plain and brass threaded fittings & fixtures and jointing the same with one step cement solvent as directed by engineer-incharge etc.: 50mm diameter CPVC ball valve (gate valve) |
| 77 | Providing, laying and fixing of CPVC ball valve to CPVC pipeline including cost of necessary plain and brass threaded fittings & fixtures and jointing the same with one step cement solvent as directed by engineer-incharge etc.: 65mm diameter CPVC ball valve (gate valve) |
| 78 | Providing, laying and fixing of CPVC ball valve to CPVC pipeline including cost of necessary plain and brass threaded fittings & fixtures and jointing the same with one step cement solvent as directed by engineer-incharge etc.: 80mm diameter CPVC ball valve (gate valve) |
| 79 | Providing, laying and fixing of CPVC Flange to CPVC pipeline including cost of necessary nuts, bolts, rubber insertion, plain and brass threaded fittings & fixtures and jointing the same with one step cement solvent including all costs of fitting charges, transpotation charges,carriage of materials, taxes etc.. :80mm CPVC flange |
| 80 | Providing, laying and fixing of CPVC Flange to CPVC pipeline including cost of necessary nuts, bolts, rubber insertion, plain and brass threaded fittings & fixtures and jointing the same with one step cement solvent including all costs of fitting charges, transpotation charges,carriage of materials, taxes etc.. :65mm CPVC flange |
| 81 | Providing, laying and fixing of CPVC Flange to CPVC pipeline including cost of necessary nuts, bolts, rubber insertion, plain and brass threaded fittings & fixtures and jointing the same with one step cement solvent including all costs of fitting charges, transpotation charges,carriage of materials, taxes etc.. :50mm CPVC flange |
| 82 | Providing, laying and fixing of CPVC Flange to CPVC pipeline including cost of necessary nuts, bolts, rubber insertion, plain and brass threaded fittings & fixtures and jointing the same with one step cement solvent including all costs of fitting charges, transpotation charges,carriage of materials, taxes etc.. :40mm CPVC flange |
| 83 | Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 80mm dia. |
| 84 | Providing, laying and fixing of GI tank nipple as the inlet / outlet pipes in RCC water tank including cost of necessary plain and brass threaded fittings & fixtures by grouting the same with cement concrete 1:1.5:3 using 10mm stome chip to ensure that the fitting is waterleak free , sealing the surrounding contact surface between the tank nipple and RCC water tank with waterproofing compound suitable for use in potable water storage, including the cost of necessary formwork, including all costs of fitting charges, curing, shuttering, transpotation charges, carriage of materials, taxes etc.. The job also includes carefuly dismantling of the existing GI tank nipple and stacking the same as directed by engineer-incharge.: GI tank nipple 80mm diameter x 600mm long |
| 85 | Providing, laying and fixing of GI tank nipple as the inlet / outlet pipes in RCC water tank including cost of necessary plain and brass threaded fittings & fixtures by grouting the same with cement concrete 1:1.5:3 using 10mm stome chip to ensure that the fitting is waterleak free , sealing the surrounding contact surface between the tank nipple and RCC water tank with waterproofing compound suitable for use in potable water storage, including the cost of necessary formwork, including all costs of fitting charges, curing, shuttering, transpotation charges, carriage of materials, taxes etc.. The job also includes carefuly dismantling of the existing GI tank nipple and stacking the same as directed by engineer-incharge.: GI tank nipple 50mm diameter x 600mm long |
| 86 | Providing, laying and fixing of GI tank nipple as the inlet / outlet pipes in RCC water tank including cost of necessary plain and brass threaded fittings & fixtures by grouting the same with cement concrete 1:1.5:3 using 10mm stome chip to ensure that the fitting is waterleak free , sealing the surrounding contact surface between the tank nipple and RCC water tank with waterproofing compound suitable for use in potable water storage, including the cost of necessary formwork, including all costs of fitting charges, curing, shuttering, transpotation charges, carriage of materials, taxes etc.. The job also includes carefuly dismantling of the existing GI tank nipple and stacking the same as directed by engineer-incharge.: GI tank nipple 40mm diameter x 600mm long |
| 87 | Providing, laying and fixing of GI tank nipple as the inlet / outlet pipes in RCC water tank including cost of necessary plain and brass threaded fittings & fixtures by grouting the same with cement concrete 1:1.5:3 using 10mm stome chip to ensure that the fitting is waterleak free , sealing the surrounding contact surface between the tank nipple and RCC water tank with waterproofing compound suitable for use in potable water storage, including the cost of necessary formwork, including all costs of fitting charges, curing, shuttering, transpotation charges, carriage of materials, taxes etc.. The job also includes carefuly dismantling of the existing GI tank nipple and stacking the same as directed by engineer-incharge.:GI tank nipple 32mm diameter x 600mm long |
| 88 | Providing, laying and fixing of GI tank nipple as the inlet / outlet pipes in RCC water tank including cost of necessary plain and brass threaded fittings & fixtures by grouting the same with cement concrete 1:1.5:3 using 10mm stome chip to ensure that the fitting is waterleak free , sealing the surrounding contact surface between the tank nipple and RCC water tank with waterproofing compound suitable for use in potable water storage, including the cost of necessary formwork, including all costs of fitting charges, curing, shuttering, transpotation charges, carriage of materials, taxes etc.. The job also includes carefuly dismantling of the existing GI tank nipple and stacking the same as directed by engineer-incharge.: GI tank nipple 25mm diameter x 600mm long |
| 89 | Providing and installation of 3 in one CP bath Mixer, including GST, transpotation charge, carriage, fixing charges etc. complete. |
| 90 | Providing bamboo scaffolding to the required safety standard for installation / dismantling of pipelines on the walls upto fourth floor of the building. The uprights / ledgers/ bracings of scaffolding should be made from 50mm diameter fresh / green bamboos which are free from any defects and shall be tied with coir ropes as per standard practice. The horizontal ledgers shall be placed at a distance not more than 1 meter apart and the uprights shall be placed not more than 2 meter apart. Full body safety belts with high strength lifeline rope and safety helmet shall be provided to the workers. The elevational area of the scaffold shall be measured for payment purpose and the payment shall be made only once irrespective of the duration of the scaffolding. |
| 91 | Providing and making temporary water arrangement from nearby water tanks to residential flats during the work with 40mm diameter Reinforced Rubber Lined (RRL) flexible Fire Hose pipe of suitable length (teflon coated), BIS mark, with coupling including opening the same after restoration of normal water supply to the quaters from the designated water tank. |
| 92 | Supplying,Installation,Testing & Commissioning of Instant Gyser (3 Litre) |
| 93 | Note-1: General Notes 1.For their own interest, contractors are advised to inspect the site with prior permission before quoting their rates. 2. All the dismantled /demolished materials shall be dumped at one place as decided by the department within 150mtr lead. 3. All the samples of materials which are to be used shall be approved by the department in advance. 4. The contractor shall comply with the provision of the Payment of Wages act 5. Rates quoted shall be inclusive of all cost of materials, labour, carriage, taxes, GST, labourcess, water charges, elctricity charges, signorage charges, wastages etc.. 6. Rates quoted shall be excluding the amount of EPFO and ESIC contributions. EPFO and ESIC contributions are reimbursable on production of valid proof of payment made by the contractor as per CPWD norms. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender