Tender For Proposed Lake Rejuvenation And Beautification Under Amrut-2.0 Scheme At Girnare Lake, Igatpuri.
Tender Value
2.99 Crore
Estimated cost
Bid Submission
10 Jul 2026
6 days left
EMD
1.49 Lakhs
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Proposed Lake Rejuvenation And Beautification Under Amrut-2.0 Scheme At Girnare Lake, Igatpuri.
BOQ
| Sl. No. | Item Description |
| 1 | A) Subwork 1 Item No : 1 Removing cement tiles,or marble or polished shahabad floor or dado with out bed concrete including stacking the materials as directed with all leads, lifts etc. complete |
| 2 | Item No : 2 Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete |
| 3 | Item No : 3 Dismantling stone masonry in Mud including stacking the materials as directed with all leads, lifts etc. complete |
| 4 | Item No : 4 Excavation for foundation of structure as per drawing and technical specifications including setting out,construction of shoring,brushing,removal of stump sand other deleterious matter,dressing of side and bottom and backfilling with approved material etc. complete. (in marshy soil by mechanical means) |
| 5 | Item No : 5 Excavation for foundation in earth,soil of all types,sand,gravel and soft murum,including removing the excavated material upto a distance of 50m. beyond the building are a and stacking and spreading as directed,dewatering,preparing the bed for the foundation and necessary backfilling,ramming,watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Upto 1.5 m |
| 6 | Item No : 6 Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking ad spreading as directed,dewatering,preparing the bed for the foundation and necessarybackfilling,ramming,wateringincludingshoringandstruttingetc.complete.(Liftfrom 1.5 to 3.0m.) By Mechanical Means |
| 7 | Item No : 7 Providing pre constructional antitermite treatment as per I.S. 6313 (ParI I by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyri fos per square meter f surface area covering 10 years guarantee on bond paper. |
| 8 | Item No : 8 Providing dry/trap/granite/quartzite/gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. |
| 9 | Item No : 9 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, plywood/steel formwork, laying/pumping. compacting. roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.)with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S I, lquality Artificial Sand |
| 10 | Item No : 10 Providing and laying in situ M-20 cement concrete of trap / granite / quartzite / gneiss metal with 15% plum of trap stones for foundation and bedding of retaining walls and ietty etc. including necessary formwork, [compacting, curing, bailing out water manually in tidal range etc. complete. |
| 11 | Item No : 11 Providing and laying Cast in situ/Ready Mix cement concrete M30 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork .cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S 1. quality Artificial Sand |
| 12 | Item No : 12 Providing and laying Cast in situ/Ready Mix cement concrete M25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or |as directed including centering, formwork, cover blocks [compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) efc. complete. With natural sand/V.S.1 quality Artificial Sand |
| 13 | Item No : 13 Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand foughening the surface if special finish is to be provided 8nd curing elc. complete. (Excluding reinforcement and structurel steel)with fully automatic micro Processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan Mixer) eic. complete. With fine aggregate (Crushed sand V8! Gradg) |
| 14 | Item No : 14 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1.3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is tobe provided and curing elc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VS| Grade) |
| 15 | Item No : 15 Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA lenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 16 | Item No : 16 Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, [formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand |
| 17 | Item No : 17 Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwark, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.1 quality Artificial Sand |
| 18 | Item No : 18 Providing and fixing in position HCRM / CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for RC.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 19 | Item No : 19 Providing and laying Needle Punched and mechanically bonded non woven Geotextile of Type Il indigenously manufactured from high quality Propylene staple fibers (continuous filament will not be accepted) on the prepared subgrade for Seperation.( For use this item SE/CE permission is obligatory.) As directed by Engineer in charge. |
| 20 | Item No : 20 Providing and laying Cast in situ/Ready Mixcement concrete in M20 of trap/ granite/quartzite/gneiss metal for steps including stee| centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VS| Grade) |
| 21 | Item No : 21 Providing uncoursed rubble masonry of trap / granite / quartzite/ gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and Wwatering etc.complete. |
| 22 | Item No : 22 Providing and Constructing gabion structure 1 Meter high or required section made up of soft mechanically woven hexagonal shaped G.I. wire confirming to IS 16014:2012 having zinc plus PVC coating of overall diameter of 3.7 MM and tying lacing wire of 3.2 mm with edge wire confirming to overall diameter 4.4 mm edges being mechanically selvedge including placing in position, fitting neatly with trap stone rubble (15t0 23 cm) all loose ends to be securely tied (Excluding transportation) etc, complete. ( In Dry condition and for under water installation extra cost to be considered) |
| 23 | Item No : 23 Providing second class Burnt Brick masonry with conventional/ 1.S. type bricks in cement mortar 1:6 in Superstructure including striking joints, raking out joints, Watering and scaffolding etc, Complete |
| 24 | Item No : 24 Providing including i dry rubble stone pitching 23 em (about 9 ) thick all material, quarry spalls, labour etc. Complete. |
| 25 | Item No : 25 Providing sang faced USIng approved screened sand, base coat of 15 mm UG waterproofing Curing compound at 1 kg per cement bag the same for n 0t less than 2 days and keeping the 8rfzcs e2iment of the base coa rough to receive the sand faced 6 to § mm thick in cement mortar 1:4 finishing he surface by taki g 0ut grains and curing for fourteen 9355 scaffolding et complete, |
| 26 | Item No : 26 Providing tuck pointing with cement mortar 1:3 for stone/Brick masonry including scaffolding and curing etc. complete. |
| 27 | Item No : 27 Providing internal cement plaster 12mm thick In singia coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing efc, complete. |
| 28 | Item No : 28 Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete |
| 29 | Item No : 29 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in CM.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the ljunction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. |
| 30 | Item No : 30 Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. |
| 31 | Item No : 31 Providing and fixing frame with /without ventilator of Size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. Spec. As directed by Engineer-In-Charge. |
| 32 | Item No : 32 Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with 0l painting 3 coats complete |
| 33 | Item No : 33 Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.76 x 1.30 mm at weight 1.070 ka/Rmt.. Top and side track seclion 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary [Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box |
| 34 | Item No : 34 Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. |
| 35 | Item No : 35 Providing and laying vitrified rustic matt stone finish tiles lhaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid ?on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning efc, complete. a) Flooring |
| 36 | Item No : 36 Providing and laying polished hand cut Kotah Stone flooring 25mm to 30mm thick and 45cm to 55cm wide in plain/diamond pattern on a bed of 1:6 C.M including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. |
| 37 | Item No : 37 Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm 10 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing 2nd cleaning etc. complete. |
| 38 | Item No : 38 Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 80 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete |
| 39 | Item No : 39 Providing and Taying in walls/calings/iloors — mm dia medium grade having embossed as S| Mark galvanised O pipes of 1.25 kg/metre necessary fitting remaking 19004 the demolished portion with filling trenches and with (Primer of anti-corrosive oif paint , 2 coats complete. Including necessary scaffolding and removing existing Pipe line if necessary ang conveying and stacking the same in PWD chowky or as directed elc. complete 20 mm upto plinth |
| 40 | Item No : 40 25 mm plinth to First |
| 41 | Item No : 41 Providing and fixing ---- mm dia stabiliser pipe/ P.V.C. soil ventwaste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete Spec. No.:As directed by Engineer-In-Charge. 100 mm upto plinth |
| 42 | Item No : 42 Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to 1.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to [40mm from face of wall a fixing with clips of approved quality and number filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete (The contractor shall give 3 yrs guarantee bond for payment) Spec. No.:As directed by Engineer-In-Charge. |
| 43 | Item No : 43 Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. |
| 44 | Item No : 44 Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete |
| 45 | Item No : 45 Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete |
| 46 | Item No : 46 Providing and laying for -—mm dia. salt glazed S.W. Pipe including fitting such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete 225 mm. |
| 47 | Item No : 47 Providing struciural siael work of rectangular hollow steel s6ction for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates €lc. a5 per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and Over it two coats of oif painting of approved quality and shade complete, As directed by Engineer-In-Charge |
| 48 | Item No : 48 Providing and fixing 22 BW.G. plain FRP sheets on top of weather shed. including scaffolding, fixing by means of nut and bolts or as directed etc. complete. (Brackets of 70 x 45 mm to be paid separately) Spec. No.: As directed by Engineer-In-Charge. |
| 49 | Item No : 49 Providing and fixing Bamboo Shingle roofing with top layer of Bamboo shingles, made of flattened CCB pressure treated bamboo of 50-100mm dia and in size of 450mm x150mm and 3 to 5 mm thick laid over bamboo battens of minimum 25mm thickness, perpendicular to rafter/Beam at spacing of 150mm c/c including laying of bituminous sheet 3 mm thick and minimum overlap of 300 mm placed over sub- purling which is laid parallel to main rafter lbeam consisting of 50mm dia not less than 3m length at spacing of 300mm c/c on treated Bamboo woven matt of approved design made out of thin Bamboo strips, supported by CCB treated Bamboo purlins of min dia 50mm not less than 3m length at spacing of 300mm c/c and WPC sheet 6 mm thick, junction details as per drawing and design including all Bamboo accessories like CCB treated Shingles,antiabrasive fire retardant coating ( top and bottom surfaces of roofing system as directed by Engineer in Charge), Bamboo, bamboo mats, SS clamps, nails, Screws, including required scaffolding and cost of labour material with all lead & lifts and machinery & equipment charges, etc complete. Spec. No.: As directed by Engineer-In-Charge. |
| 50 | Item No : 50Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. Spec. No.:As directed by Engineer-in-Charge. |
| 51 | Item No : 51Providing and applying Gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / o on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. Spec. No.:As directed by Engineer-In-Charge. |
| 52 | Item No : 52Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ‘preparing the plaster surface \applying primer coat scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item No. 1510 18 prior approval of Superintending Engineer will be necessary Spec. No_As directed by Engineer-In-Charge. |
| 53 | Item No : 53Providing and applying two coals of synihatic enamal paint of approved cof lour to new /old structural steel work 3nd wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (€xcluding primer coat) etc. complete. |
| 54 | Item No : 54Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate( natural sand/ VS grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. MORT&H (5th Rev.) 1700, 2205, 2304 |
| 55 | Item No : 55Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles attop and bottom of 25 x25 x5mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend lembedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete. As directed by Engineer in charge. |
| 56 | Item No : 56Providing weep holes in brick masonry /plain /reinforced concrete abutment, wing wall / return wall with 100mm diameter AC pipe extending through the full width of the structure with slope of 1V: 20H towards drawing face as per drawings and technical specifications etc. complete. MORT and H -2700 and 2200 |
| 57 | Item No : 57Providing and fixing 90 cm x 60 cm Granite plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete |
| 58 | Item No : 58Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (225 kg) Spec. Spec. No ‘As directed by Engineer-In-Charge. |
| 59 | Item No : 59 Providing and fixing 40mm diameter and 1.5 mm thick Stainless steel hand railing in S.S.304 Grade including fabricating,fixtures,errecting,necessary welding,grinding,finishing, buffing to stainless steel pipe etc. complete |
| 60 | Item No : 60Providing aupplying fabricating and fixing panel of aluminium composite panel cladding in approved shape made out of 4 mm thick ACP sheet material consisting of 3mm thick FR grade mineral core foliowing NBC part IvV Fire and life safety (having 2 hours fire resistance in accordance to ASTM E119-12 and BS476 part 6 and 7 class O) sandwitched between two aluminium sheets (each 0.5 mm thick of AA 5005/AA3105 grade) The aluminium composite panel cladding sheet shall be coil coated with kynar 500 based PVDF/Lumiflon based fluropolymer resin (having 70:30 ratio of PVDF coating of approved colour and sg=hade on top face and polymer (service) coating of bottom face as specified using stainless steel screws,nuts,bolts,washers, cleats,weather silicon sealent,backer rods etc .overall weight of the ACP shall not be less than 7.5 Kilogram/Square Metre) Spec. No.: As directed by Engineer-In-Charge |
| 61 | Item No : 61Directional signage Design, supply, fabrication and fixing acrylic multilingual Braille (raised dots) directional signboards of size 6\\" x 9\\" designed as per accessibility standards and having 4mm thick acrylic base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm raised not less than 0.8mm above base plate and the equivalent word written in Hindi with Devnagri non glare acrylic letters of height 15mm raised not less than 0.8mm above base plate and having a non glare acrylic cut arrow pointing in the required direction. Each signboard to be fixed as per manufacturers specifications on the wall at the approved location and at a height of 1200mm from FFL and as per the directions by the engineer in charge As directed by Engineer-i |
| 62 | Item No : 62Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. Spec. No.:As directed by Engineer-In-Charge. |
| 63 | Item No : 63Providing and fixing European type white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection etc. complete. Spec. No.‘As directed by Engineer-In-Charge. |
| 64 | Item No : 64Providing and fixing on walls/ ceiling/ floor 15 mm dia. ICPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD Cchowky or as directed etc. complete. |
| 65 | Item No : 65Providing and fixing on walls/ ceiling/ floar 20 mm dia CPVC pipe with necessary fittings, remaking good the demolished portion et complete: Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky of as directed etc. complete. |
| 66 | Item No : 66Providing and fixing in position powder coated aluminium louvered windows / ventilater of various sizes with powder coating as per detailed drawing and specifications ncluding aluminium frames 80 x 38 mm x 1.22 mm box type, § mn thick sheet glass louvers, of approved quality otc._complete As directed by Engineer-In-Charge. |
| 67 | Item No : 67Providing and fixing 30mm thick SOLID PANEL PVC INTERNAL DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm X 20mm for stiles ,top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with Smm thick heat molded PVC channel of size 30 x 100mm forming stiles, and Smm thick, 125mm wide PVC sheets for top rail, lock rail and bottom rail on either side, and 15mm (Smm x 3) thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 10 mm thick prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles and rails with 30mm wide x Smm thick PVC sheet beading on sither side, and joined together with solvent cement adhasive ate. An additional Smm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvant cement adhesive. including stainless steel fixtures and fastening Complete as per direction of Engineerineharge,manufacturer'sspecification and drawing |
| 68 | B) Electrification Item No : 1 Providing & erecting 7 M high galvanised octagonal pole with bottom of 130 mm A/F, top 70 mm AJF on provided specification no OH-PL/PSC |
| 69 | Item No : 2Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GIpole). |
| 70 | Item No : 3Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal/conical GI pole). |
| 71 | Item No : 4Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no.EA-EP |
| 72 | Item No : 5Supplying and erecting integrated LED street light fitting 60W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 6600 Lumens, min. efficacy of 110 lumen/W, CRI>70,CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2. |
| 73 | Item No : 6Supplying and erecting integrated LED Post Top 45W IP65 & IK10 class having die cast aluminium housing with UV protected polycarbonate diffuser, having system lumens output of Min.4500 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of140-240V, inbuilt surge protection of 2 kV, Life class of 30,000 Hrs. at L50B50 , including driver complete with 2 Year warranty as per specification No FGODF/ FLS2. |
| 74 | Item No : 7Supplying and erecting LED Strip light 5m Length Max. 45 W IP20 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f.>0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50, including driver with 1 year warranty. |
| 75 | Item No : 8Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW |
| 76 | Item No : 9Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire. |
| 77 | Item No : 10Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22 /E-27 base. |
| 78 | Item No : 11Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete. |
| 79 | Item No : 12Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL |
| 80 | Item No : 13Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecularcopper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up theexcavated earth with required quantity complete, and recording the resultsSpecification no. EA-MOBI |
| 81 | Item No : 14Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specificationno. EA-EP. |
| 82 | Item No : 15Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials dulypainted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. |
| 83 | Item No : 16Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. |
| 84 | Item No : 17Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete. |
| 85 | Item No : 18upplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections |
| 86 | Item No : 19Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. |
| 87 | Item No : 20Supplying and erecting PVC Surface modular double mounting plate 6 module complete duly erected. |
| 88 | Item No : 21Supplying and erecting PVC Surface modular double mounting plate 8 module complete duly erected. |
| 89 | Item No : 22Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW |
| 90 | Item No : 23Point wiring for independent plug in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW |
| 91 | Item No : 24Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 92 | Item No : 25Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 93 | Item No : 26Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame |
| 94 | Item No : 27Supplying and erecting mains with 3x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW |
| 95 | Item No : 28Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid inprovided trench/ pipe as per specification no. CB-LT/AL |
| 96 | Item No : 29Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. |
| 97 | Item No : 30 Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 98 | Item No : 31Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 99 | Item No : 32Supplying, erecting & marking SPMCB 40A to 63A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 100 | Item No : 33Supplying and erecting bakelite sheet 6 mm thick fixed to wall of on provided panel board with necessary materials such as screws, wall fasteners supports, nuls bolts etc, complete. |
| 101 | Item No : 34Supplying and erecting GI sheet 1.6 mm (16 SWG) caution board of size 200 x 150 mm duly painted with red oxide and enamel paint in Marathi, Hindi and English erected at position for medium voltage (415 Volt) installation withcompliance to IS 2551-1982 |
| 102 | Item No : 35Supplying and erecting mains with 2x10 sq.mm FRLSH copper PVC insulatedwire laid in provided conduit/trunking/inside pole/Bus bars or any other placesas per specification No: WG-MA/BW |
| 103 | Item No : 36Supplying and erecting metal work in CRCA sheet including Iron work forsupports with fabrication of boxes, panel boards, etc. including cutting,bending, drilling, welding, riveting, treated with anti-rust treatment and dulypowder coated or painted with one coat of red lead paint and 2 coats of enamelpaint complete. |
| 104 | Item No : 37Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm.stone metal duly plastered with necessary curing for complete. (pole muffing orany other purpose). |
| 105 | Item No : 38Supplying and erecting four pole power contactor 430 V, 40 A for time switchcomplete erected on provided wooden block/ box, with necessary materials. |
| 106 | Item No : 39Supplying & erecting crimping type copper lugs for cable up to 16 sq mmcomplete as per specification No. CB-CL/CU |
| 107 | Item No : 40Supplying & erecting 5W-7W, 230V integral type LED Lamp suitable for B-22 /E-27 base. |
| 108 | Item No : 41Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25mm with accessories on wall/ceiling as per specification No: WG-MA/CON. |
| 109 | Item No : 42Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. withPVC accessories on wall /ceiling as per specification No: WG-MA/CON. |
| 110 | Item No : 43Supplying and fixing wire mesh (Jali) cover suitable for fitting / fan or for anypurpose, complete with necessary materials. The jali cover shall be made fromgood quality G.I. wire mesh size 25 x 25 (mm) and made up of 14 SWG G.I.wire with side / supporting MS strips of suitable size. |
| 111 | C )Land Scaping GARDEN SOIL: Item No : 1Supplying on site garden soil well sieved 90% to pass through I.S. sieve of 10mm size free from stones rubbish like dried grass roots other such materials. The soil should be fresh from quarry. The colour of the soil generally be red. The soil will be measured by measuring box. (Farma) Item includes royalty charges, octroi, corporation Tax Transporting. loading- unloading etc. (Lead charges per 80 km. considered.) |
| 112 | Item No : 2FARM YARD MANURE :- supplying on site well decayed, well dried, well powdered without clods and free from stones dried grass and other rubbish material. The colour of the manure generally be black. The manure will be measured by measuring box. (Farma) Item includes Transporting, loading-unloading etc. (Lead charges per 40 km. are considered.) |
| 113 | Item No : 3Preparing Lawn (30cm depth)excavation of ground to required depth of 30Cms. - 5% Brachyome) Maintain till well developed copmlete |
| 114 | Item No : 4Preparing Shrubbery:- Excavating the ground to a required depth of 30cms, Removing rubbish and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 30 cms. Mixing garden den soil and manure thoroughly well, leveling, watering on previous night. Planting well developed Shrubs plant 0.5 Mtrs.apart as directed and maintaining till well established by watering, weeding, Stirring, replacing of casualties the etc. complete. |
| 115 | Item No : 5Plants required for landscaping: (Euphorbia, Hemelia, Malphegia, Mussanda, Ticoma, Song of India, Golden Bamboo, Buddhas Bamboo, Golden Ficus, Phonicus Palm, X' mas Tree, Ficus panda etc.) plant hight 4-5 feet |
| 116 | Item No : 6Preparing Ground cover:- Excavating the ground to a required depth of 20cms, Removing rubbish and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 20 cms. Mixing garden den soil and manure thoroughly well, leveling, watering on previous night. Planting Suitable ground cover as directed in staggering pattern, distance between two row 25 cm, maintaining till well established by watering, weeding, Stirring, replacing of casualties the etc. complete |
| 117 | Item No : 7Mazdoor-heavy |
| 118 | Item No : 8mali |
| 119 | Item No : 9Preparing canna bed:- Excavating the ground to a required depth of 30 cms, Removing rubbish and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 30 cms. Mixing garden den soil and manure thoroughly well, leveling, watering on previous night. Planting well developed canna rhyzomes 40 cm apart, maintaining till well established by watering, weeding, Stirring, replacing of casualties the etc. complete |
| 120 | Item No : 10Mogra/ Creeper/Climbers:-Excavating pit with sixe 0.3m*0.3m*0.3*m removing and conveying unwanted stuff to required distance as directed. Filling the pit with approved excavated matrial upto a hight of 0.15 mtr and remaing hight of 0.15 mtr. with fresh garden soil and manure in 3:1 proportation. Mixing soil and manure thoroughly well leveling. watering on privious night. Plantine one or two year old healthy plant as per specification. Maintaining till well established by watering, wedding. watering, stirring and replacement of casualties etc. complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender