Tender For Revival And Restoration Of Ganeshbal Mandir Bindoo Village Zalangam Kokernag Anantnag
Tender Value
28.43 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
2 days left
EMD
56876
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Revival And Restoration Of Ganeshbal Mandir Bindoo Village Zalangam Kokernag Anantnag
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means over areas (Exceeding 30cm and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed -All kindsof soils |
| 2 | Extra for carriage of excavated Material beyound 50m upto 1km lead by M.T |
| 3 | P/L of Stone soling tightly hand Picked using Soling Stone including carriage 15km via M.T |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone Crushed aggregate 40mm nominal size) |
| 5 | Providing and laying Reinforcement cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level.1:1.5:3 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) Crushed Aggregate in raft ,plinth band, |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 7 | Supplying/Fixing Reinforcment for R.C.C Work including straightening,bending to proper shapes and length as per details,supplying and bending with G20 annealed back wire and placing in position with proper blocks ,supports, chairs,spacers etc - complete upto ist floor level ISI approved Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 8 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 aggregate 20 mm nominal size) |
| 9 | Brick work with fps bricks of class designation 75 in foundation and plinth including extra for brick work in super structure above plinth level in cement mortar 1:6 mix |
| 10 | Extra for brick work above plinth level upto floor V level |
| 11 | Centering and Shuttring including Strutting ,Propping removal of formwork for Foundations, footings, bases of columns etc. for mass concrete. Complete Job |
| 12 | Centering and Shuttring including Strutting ,Propping removal of formwork- Complete Job suspended floors |
| 13 | Centering and Shuttring including Strutting ,Propping removal of formwork for Lintel, beams, plinth beams, girders, bressumers and cantilevers.Complete Job |
| 14 | Centering and Shuttring including Strutting ,Propping removal of formwork for Columns, pillars, piers, abutments, posts and struts. Complete Job |
| 15 | Providing wood work in frames of doors, windows, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length ( excluding hold fast lugs or with dash fasteners ): Imported wood . |
| 16 | Providing hoisting and fixing circular ornamental type (with hand carving design) wood work in beams//posts/ post-plates or like components including cost of screws etc. including Spirit polishing complete deodar wood. |
| 17 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete. Imported wood |
| 18 | Providing and fixing glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30-40 mm thick including hand carving (front side) and two coats of sprit polishing imported wood |
| 19 | P/F wire guage shutters for, windows & clerestory windows including ISI marked black enameled M.S pressed butt hinges bright finished of required size with necessary screws, all complete as per direction of Engineer-in-charge.( imported wood) 30mm thick incl cost of primer and painting two or more coats,incl the cost of wire guage all complete. |
| 20 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 40 mm thick. imported wood including hand carving (front side) and two coats of sprit polishing |
| 21 | 4 mm thick glass pane (weighing not less than 10 kg/sqm) |
| 22 | P/F of 40 x 4 mm flat iron hold fast 40cm long including fixing to frames with 10 mm dia bolts nuts & wooden plugs and embedding in cement concrte block 30x 10x5 cm of M10 grade |
| 23 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade includingrubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 24 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. face dressed Fine chisel dressed |
| 25 | Providing and laying rough chisel dressed Devri Stone in kerbs, of size 150x150 mm face with chamfer in cement mortar 1: 6 (1 cement : 6 coarse sand) including curing. |
| 26 | 12 mm thick cement plaster on rough side of brick wall in 1:4 mix |
| 27 | Extra for making mloulding/design in cement plaster as per hindu methedology. |
| 28 | Extra for plastering done on moulding cornices or architraves including neat finish to line and level :13.27.2 In two coats |
| 29 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 30 | Wood Panelling in walls using 12mm thick imported T&G wood panelling including jambs with spacing 3' c/c complete as per specifications. |
| 31 | Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood including base of plywood and frame work all complete job Char Gul |
| 32 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 33 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete.Welded |
| 34 | Providing colour coated Hi-rib GS sheet roofing incl vertical/ curved surface fixed with polymer coated J or L hooks or Screws ,bolts and nuts 8mm dia with bitumin and G I limpet washers of approved brand and manufacture incl. ridges and valley .50mm thick. |
| 35 | Providing and Fixing of ornamental wooden eaves boarding 300X40mm nominal size of budloo wood including priming painting and included all fixing charges. |
| 36 | P/F of aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:-L-Drop with lock ornamental |
| 37 | P/F of aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:-ornamental Handles 18'' |
| 38 | P/F of aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:-ornamental Handles 9\\" |
| 39 | P/F of aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:-T-Bolt 6\\" |
| 40 | P/F of aluminum fittings ISI marked (anodized anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colors or shades with necessary screws etc. complete:-Hooks |
| 41 | Manufacturing supplying and fixing stainless steel overhead signage boards made up of 2mm thick Stainless steel sheet as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 and fixing the same to the plate of structural frame work of stainless steel by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including S.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). |
| 42 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup andlock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffoldings for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations withessential safety features for the workmen etc complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. |
| 43 | Providing. and fixing of foundation stone with pedestal and lnauguration stone with necessary writtings ind curtains with curtain rods and other necessary andllary items required at site as directed by engineer lncharge at site(foundation and inaugratlon comprises of two jobs) |
| 44 | Supply, fabrication and fixing of Brass Kalash (Temple Shikhara Kalash) of approved design and shape, made out of heavy gauge brass sheet complete with ornamental finial, polishing, welding, nuts, bolts, clamps, anchoring arrangement and all allied accessories, including transportation, erection at temple roof/shikhara and making good the damages complete in all respects as directed by the Engineer-in-Charge. |
| 45 | Carriage of sand and aggregates from an av lead of 15 Kms. |
| 46 | PART B Boundary WALL:Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 47 | P/L Stone solling of Specified size duely hand packed incl. all carriages and loading/unloading. |
| 48 | P/L in position cement concrete in 1:4:8 (1 cement : 4 coarse sand : 8 graded crushed stone aggregate,40mm nominal size) excluding the cost of centering and shuttering complete job. |
| 49 | Providing and Laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:2:4 mix. |
| 50 | Brick work with FPS bricks 75 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand) with Extra for brickwork in super structure above plinth upto floor V level including all costs and carriage by M T and HL |
| 51 | Centering and shuttering including strutting, propping etc. and removal of the same for foundatons above plinth level |
| 52 | P/L of 50 mm thick Cement Concrete Flooring/Coping in 1:2:4 mix. |
| 53 | Back filling behind walls by way of granular material/Nallah muck including all costs and carraiges |
| 54 | P/F of 75mm dia PVC weep holes in proper line and gradient complete job. |
| 55 | Structural steel work in built up section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 56 | Painting with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on new work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. |
| 57 | Carriage of different items by machanical transport including loading/unloading.aggregates for an average lead of 15 Km. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender