Tender For Special Repair Of Guard Room 05 X Bldg, Bldg No P-06, P-17, P-18, P-19 And P-23 Fasf At New Cantt Prayagraj
Tender Value
48.68 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
14 days left
EMD
97360
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Guard Room 05 X Bldg, Bldg No P-06, P-17, P-18, P-19 And P-23 Fasf At New Cantt Prayagraj
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 2 | Demolition of brickwork masonary built in lime or cement mortar including all quiens arches, pillars etc but including concrete articles, complete all as specified and directed. |
| 3 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area exc.1.5 Sqm each not exc. 4.00 Sqm each complete all as specified and directed. |
| 4 | M&L for 30mm thick flush shutters with block board core and plywood face panels commercial type on both face complete all as specified and directed. |
| 5 | Second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc, complete all as specified and directed. |
| 6 | S&F of 125 x 60mm pressed steel frames for doors with double rebates including necessary fixing lugs, hinges, lock strike plate, etc, supplied and fixed all as per manufcaterer instruction complete all as specified and directed. |
| 7 | S&F factory made solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed. |
| 8 | S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles) with 2 / 4 / 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane dark painted on the both face & 2mm prelam PVC dark sheet on both face complete all as specified and directed. |
| 9 | S&F 100mm long stainless steel butt hinges with steel pin complete all as specified and directed. |
| 10 | S&F for 200mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed. |
| 11 | S&F 300mm long, aluminium alloy, anodised aldrop door bolt including fixing clips of sheet, cast or exturded section complete all as specified and directed. |
| 12 | S&F 150mm long aluminium alloy floor door stopper, fabricated type complete all as specified and directed. |
| 13 | Dismantling of floor hearth or wall tling including cement mortar bedding (but not backing), removing servicesable tiles to store and rubbish off the premises complete all as specified and directed. |
| 14 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) polished dark coloured, area of each tiles 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick (1:6) for laying floor finishes complete all as specified and directed. |
| 15 | M&L for glazed ceramic coloured wall tiles in vertical surface 450 x 300 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in 1:4 CM complete all as specified and directed. |
| 16 | M&L for non skid joint free coloured ceramic floor tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floor etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed. |
| 17 | M&L for Granite (of any type) work 20mm thick (table rubbed and polished) including the screed bed in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed. |
| 18 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed. |
| 19 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each complete all as specified and directed. |
| 20 | M&L for glavanised pre-painted steel windows of approved coloured (base steel as per IS 513 of 0.6mm thick and galvanised as per IS 277 with Zinc of 120 GSM) of single shutter, openable type, outer frame 48mm x 50mm, center mullion 48mm x 50mm shutter frame 47mm x 20mm or 52mm x 25mm, glass beading 12mmx 12mm including all fixing srews and assosseries and 01 Nos handle of 100mm long, 02 Nos Stainless steel hinges of 75mm long in each shutter complete all as specified and directed.Note : Window glass and MS grill will be measured and paid separetely. |
| 21 | S&F including fabrication of framed work such as in grills, grating, hold fast of door and window chowkat etc with ends of bars shouldered and or riveted or forget into spikes, frames guard bars, barred iron doors and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed. |
| 22 | S&F 4mm thick plain glass area not exc 0.5 Sqm in each pane new ventilator/window shutter complete all as specified and directed. |
| 23 | S&F in galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed. |
| 24 | M&L in repairs for 1000 ltrs rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. |
| 25 | S&F for 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210 grams), complete all as specified and directed. |
| 26 | S&F in repairs 15mm bore GI tubes 'medium grade' galvanised with all fittings and fixed to walls and ceiling or laid in floor, complete all as specified and directed. |
| 27 | S&F in repairs 20mm bore GI tubes 'medium grade' galvanised with all fittings and fixed to walls and ceiling or laid in floor, complete all as specified and directed. |
| 28 | S&F for 17/18 mm thick 100% solid HDMR both side laminated board (one side white and other side decorative colour) of required size made from exterior grade high dencity fibre (HDF) board of lignocellulosic fibrous material having dencity 850 Kg/Cum fixed to frame work with screws for cupboard or kitchen cabinet with all necessary stainless steel fittings and fixture complete all as specified and directed. |
| 29 | S&F of Stainless steel auto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as specified and directed. |
| 30 | S&F of stainless steel handles 150mm size for cabinet shutters complete all as specified and directed. |
| 31 | S&F in repair 20mm dia stainless steel curtain rod of wall thickness not less than 1mm with both side decorative brakets and fixing brakets complete all as specified and directed. |
| 32 | M&L for RCC 1:2:4 nominal mixed using 20mm graded stone aggregate as in chajja/latak etc and the like, complete all as specified and directed. |
| 33 | Form work to sides and soffit of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc rough finished complete all as specified and directed. |
| 34 | S&F TMT bars of 10mm dia and over in reinforcement cut to length bent to shape required including cranking bending and binding with mild steel annealed wire not less than 0.90mm dia or securing with clips and as straight in groves complete all as specified and directed. |
| 35 | M&L for brickwork with sub class 'B' bricks (old size), straight or curved on plan exc 6 mtr mean radius, built in CM 1:6 complete all as specified and directed. |
| 36 | Taking down cement plaster/terrazzo/tiles etc on brick wall or stone wall etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 37 | M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work finished even and fair without using extra cement complete all as specified and directed. |
| 38 | M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface, finished even and fair complete all as specified and directed. |
| 39 | M&L for rendering 10mm thick in CM 1:3 on ceiling of brick or concrete surface, finished even and fair complete all as specified and directed. |
| 40 | Preparation of newaly plaster surface of wall and applying two coats of oil bound distemper on 1mm thick wall putty complete all as specified and directed. |
| 41 | M&L prepation of newly plastered surfaces of wall, pilasters, cornices etc and applying two coat of cement based paint in various pattern (two or more colour combination) over one coat of alkali resistant primer complete complete all as specified and as directed.. |
| 42 | Preparation of newly plastered surface of ceiling and applying two coats of white wash complete all as specified and directed. |
| 43 | M&L for preparing old decorated surfaces of wall and applying two coats of oil bound distemper with 1mm thick birla wall putty white or tinted complete all as specified and directed. |
| 44 | M&L complete removal of preparation of old decorated surface of wall applying two coat of cement based paint in various pattern (two or more colour combination) over one coat of alkali resistant primer complete complete all as specified and directed. |
| 45 | Preparation of old plastered surface of ceiling and applying two coats of white wash complete all as specified and directed. |
| 46 | M&L for preparation of old painted surface of steel surfaces (previously decorated) painting with one coat of synthetic enamel paint with paint sprayer machine on old steel surfaces for grills, guard bars, shutters etc complete all as specified and directed. |
| 47 | M&L preparation of newly steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer with paint sprayer machine, complete all as specified and directed. |
| 48 | Demolition of plain cement concrete in any position including tar felt & cement mortar bedding etc from roof or sunken complete all as specified and directed. |
| 49 | Complete removal of mud phuska from roofs of any thickness and removing the waste material from site to a distance exc 250 mtr but not exc. 500 mtr and deposited where directed including cleaning of surface complete all as specified and directed. |
| 50 | Dismantaling of brick tiles or terracing tiles, single layer on roofs complete all as specified and directed. |
| 51 | M&L for plain cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate) as in roof padding, roof kerbs, benching on roof slab and other similar works laid as per slop required finished even and fair complete all as specified and directed. |
| 52 | M&L for 10mm thick plaster in CM 1:3, mixed with liquid water proofing compound over concrete surface of roof when concrete is green complete all as specified and directed. |
| 53 | Cleaning the dust,durt and any other foreign material from roof surface and applying a coat of bituminous primer @ 0.40 Ltr/Sqm uniformily and primer shall be allowed to dry over night as conforming to IS 3384-1986 complete all as specified and directed. |
| 54 | M&L for laying of 3mm thick APP membrane of (reinforced with non-woven fabric polyester type) (weight not less than 3 Kg per Sqm) shall be done using butane torch maintaining 100mm side overlap and 150mm end overlap, sealing all overlaps over hot bitumen 85/25 @ 1.2 Kg/Sqm complete all as specified and directed.Note : All water proofing work shall be done as per manufacturer instruction and under supervision of manufacturer technical representative. |
| 55 | Supply only Liquid Water proofing Compound (ISI marked) complete all as specified and directed. |
| 56 | M&L for 40mm thick brick tiles laid over and including 20mm thick screed bed in CM 1:4 mixed with polymer based liquid water proofing additive @ 2% by weight of cement and the joints of tiles shall be filled with CM 1:3 mixed with crude oil as per SSR-2009 (Part-I) on non assesible roof area complete all as specified and directed. |
| 57 | Refixing only 40mm thick brick tiles laid over and including 20mm thick screed bed in CM 1:4 mixed with polymer based liquid water proofing additive @ 2% by weight of cement or as per manufacturer's instruction and the joints of tiles shall be filled with CM 1:3 mixed with crude oil as per SSR-2009 (Part-I) on non assesible roof area complete all as specified and directed. |
| 58 | S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including 'P' or 'S' trap complete all as specified and directed. |
| 59 | S&F in repairs vitreous China white wash down water closet pan (pedestal pattern) including fixing bolts, plastic water closet white seat cover clossed pattern with flat bottom (white colour) and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed. |
| 60 | S&F for in repair vitreous china wash and basin, white, flat back, size 550mm x 400mm fixed on MS bracket including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, waste fitting, pipe and union complete all as specified and directed. |
| 61 | S&F for waste coupling 32mm size full thread with 130mm height complete all as specified and directed. |
| 62 | S&F for bottle trap (with internal partition) 32mm size with 300mm & 190mm long wall connection pipes & wall flanges, Make :Jaquor Cat part ALD-CHR-769L300X190, complete all as specified and directed, |
| 63 | S&F in repair PVC flushing cistern 10 ltrs capacity valve less syphonic action type low level with and including ball valve float & handle, waste pipe & brackets complete all as specified and directed. |
| 64 | S&F in repair vitreous china Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including 32mm dia CP coupling, CP urinal spredar with CP pipe up to angle cock, waste pipe etc with all fixing arrangement and pointing around urinal back complete all as specified and directed. |
| 65 | S&F in repair Wall Mixer with provision for overhead shower with 115mm bend pipe on upper side,connecting legs and wall flanges, Make : Jaquor, Cat Part No. COP -273PM, complete all as specified and directed |
| 66 | S&F for Maze overhead shower 200 x 200mm square shape single flow (body & face plate SS with chrome finish) with rubit cleaning system complete all as specified and directed |
| 67 | S&F for shower arm 20mm dia and 450mm long round shape with 90 degree bend for wall mounted shower with flange complete all as specified and directed |
| 68 | S&F in repairs 600mm long tubular towel rail, brass chromium plated of 20mm dia complete all as specified and directed. |
| 69 | S&F in repair urinal spreader with CP connection pipe complete all as specified and directed. |
| 70 | S&F in repairs bevelled rounded edge mirror of 5.00mm thick glass with stainless steel screw complete all as specified and directed. |
| 71 | S&F in repairs stainless steel grating dome 100mm dia without waste holes as required complete all as specified and directed. |
| 72 | S&F in repair health faucet with flexible pipe of one mtr length including wall hook for EWC complete all as specified and directed. |
| 73 | S&F in repairs Stainless steel grating dome 100mm dia with waste holes as required complete complete all as specified and directed. |
| 74 | S&F for angular stop cock with wall flange, Make : Jaquor Cat Part No. OPP-CHR-15053PM, complete all as specified and directed. |
| 75 | S&F in repair for 15mm bore bib taps chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipes or brass ferrule complete all as specified and directed. |
| 76 | S&F in repair 15mm bore CP central hole basin mixer (swan neck/head type) with regular spout fancy type, cast copper alloy with capstan heads,long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed. |
| 77 | S&F for two way bib cock/angle valve with wall flange complete all as specified and directed. |
| 78 | S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 79 | S&F in repairs 110mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed. |
| 80 | S&F in repairs 75mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trences complete all as specified and directed. |
| 81 | S&F in repair 110mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 82 | S&F in repair 75mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 83 | S&F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating incl joinig to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and directed. |
| 84 | Cutting holes into existing manhole brick wall manhole built in CM, connection new drains making good to pipes and rendering cuttting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 smooth finished and reforming benching as required for intenal dia of pipe 150mm, complete all as specified and directed. |
| 85 | M&L PCC type B-1 (1:2:4) using 20mm graded stone aggregate as in coping in lintels upto 1.5 mtr clear span, cills, steps, seismicand other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 86 | Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 87 | M&L for PCC type E2 1:5:10 using 40mm graded aggregate as in sub base complete all as specified and directed |
| 88 | M&L for 80mm thick M-40 grade factory made rubber moulded vaibratory cement concrete coloured interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25mm thick sand cushion and joints filled with sand complete including dismantling of tiles complete all as specified and directed. |
| 89 | Taking down carefully aluminium/copper point wiring any type for one light fan socket power point of buzzer controlled by one switch complete including fitting/fixtures such as switches, ceiling roses, holder, socket, light fitting etc for credit and making good distributed surfaces of walls, ceiling etc, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 90 | Taking down carefully aluminium/copper point wiring any type for one light fan socket power point of buzzer controlled by one switch complete including fitting/fixtures such as switches, ceiling roses, holder, socket, light fitting etc for credit and making good distributed surfaces of walls, ceiling etc, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender