Tender For Repair And Maintenance Of Doors, Window, Ventilation, Cub Board Of Offrs, Jcos And Or Accn Of Estate Area At Mil Stn Chheoki
Tender Value
50 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
16 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Doors, Window, Ventilation, Cub Board Of Offrs, Jcos And Or Accn Of Estate Area At Mil Stn Chheoki
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhat with shutter (without taking off shutters from the frame) area not exc 1.5 Sqm each and removing from site complete all as specified and directed. |
| 2 | Taking down chowkhat with shutter (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4.0 Sqm each and removing from site complete all as specified and directed. |
| 3 | Taking down shutters of any description not exc 1 Sqm each and removing from site complete all as specified and directed. |
| 4 | Taking down shutter of any description exc 1.0 Sqm but not exc 2.0 Sqm each and removing from site complete all as specified and directed. |
| 5 | Dismantling structural steel work including doors, gates but excluding framed trusses etc complete all as specified and directed. |
| 6 | M&L for 30mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 7 | S&F 35mm thick factory made 2nd class hard wood glazed and skelton shutters, open repeated and prepared to receive glass, gauze etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I, Section 8, Clause 8.24(a) and for door and fixed with chowkhats, chemically pressure treated complete all as specified and directed. |
| 8 | S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 9 | S&F factory made steel window with side hung shutter including projecting type hinges with steel handle, steel peg stay, complete with glazing bar, dovetailed or welded complete all as specified and directed. |
| 10 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 11 | M&L in repair for fabrication and fixing of powder coated aluminium door with frame of section size 85mm x 44.50mm x 1.56mm thick, shutter with top & bottom rail of section 113mm x 44.45mm x 1.56mm thick and styles and middle rails of section 85.5mm x 44.45mm x 1.56mm thick with suitable locking arrangement with lock (Make : Godrej/Link) 6 lever and self closing devices with rebates including jointing cleats of suitable section for fixing builders hard ware fittings, glazing clips rubber packing for air lock purpose, anodised aluminium snap beading screw for fixing glass panel in the same shutter covered with fully selected quality tinted glass 5mm thick with rubber packing each sutter shall be provided with two Nos decorative type aluminium handle of 200mm long complete all as specified and directed. |
| 12 | M&L in repair for fabrication and fixing of powder coated anodised window & ventilator openable type with frame of section 85mm x 44.50mm x 1.56mm with shutter style and rail of powder coated aluminium section of size 47.62mm x 44.45mm x 1.62mm including joining cleat for fixing builder hardware glazing clips rubber packing for air lock purpose anodized aluminium strip beading screw etc for fixing glass panes in framesshutter strip beading screw etc for fixing glass panes in frame shutter covered with fully selected quality including glass 5mm thick with rubber packing complete each shutters of window shall be provided with one aluminium tower bolt and one handle of size 150mm, two stainless steel hinges of size 100mm, aluminium stay 01 No, 2 Nos 150mm aluminium tower bolt with etc complete all as specified and directed. |
| 13 | S&F Aluminium Section powder coated of colour as approved openable sliding type, three track window / ventilators with sliding shutter and frame, Series C with aluminium section of size including 5mm thick tinted glass and mosquito proofing net as indicated below complete all as specified and directed :-(i) Frame Section 92 x 31.75 x 1.20mm(ii) Shutter top bottom and side rails 39 x 20 x 1.50mm.(iii) Glass 5mm thick one side reflective glass and other side visible of with rubber gasket with clips and hold fast 04 nos for each window including necessary handles, tower bolt etc complete.(iv) Aluminium grill 7.5mm dia Design No. DG-102 make DECO grill & Design No AL-103 make fixed to aluminium section 50 x 20 x 1.5mm in existing opening. (v) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm fixed with tinted tracks or galvanised wire staple. |
| 14 | S&F powder coated aluminium grills of bar size 6mm x 5mm with square gap of size 75mm fixed with suitable aluminium channel of size 12-15mm section complete all as specified and directed. |
| 15 | Taking down and refixing of aluminium door double or single leaf shutters after repairing, tightening of all loose joints and replacing rubber beading, floor spring as requied and pivot top hinges, size of door exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and directed. Note : Floor spring and pivot hinges shall be measured and paid separately. |
| 16 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other Frames/Chowkhat of decorative type/wood grain printed colour of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.Note : For WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 17 | Description same all as per item No 16 here-in-before but size 50 x 125mm |
| 18 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type/wood grain printed colour flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 grams) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and including S & F with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. |
| 19 | S&F for Factory made wire gauged PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails, M.S frame shall be covered with heat moulded decorative type/wood grain printed colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, wire gauzed i.e panel will be of wire gauze in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S Solid tube and this tube shall be welded to M.S tubes. The wire gauge shall be stretched to tighten firmly of wood grain printed colour PVC sheet to be fitted in the M.S frame welded / sealed to the styles & rails with suitable 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed. |
| 20 | S&F 200mm stainless steel fancy handle of approved make fixed with SS screws etc, complete all as specified and directed. |
| 21 | S&F 200mm stainless steel barral tower bolt of extruded section complete all as specified and directed. |
| 22 | S&F 300mm stainless steel sliding door bolt with hasp and staple (bolt type) including fixing with necessary accessaries complete all as specified and directed. |
| 23 | S&F in repair 6mm thick bevelled edge looking mirror fancy type mounted on wall with chromium plated brass screws with spacer in appropriate number and cup washer fixed on wall complete all as specified and directed. |
| 24 | S&F in repair stainless steel peg set of six with base plate and fixed to wall/door with rawal pugs / SS screw complete all as specified and directed. |
| 25 | S&F in repair stainless steel peg set of three with base plate and fixed to wall/door with rawal pugs / SS screw complete all as specified and directed. |
| 26 | S&F in repair CP fancy type towel ring of size 150mm dia complete all as specified and directed. |
| 27 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 120mm (minimum) wide with chromium plated brass bracket guard and railing 600mm long complete all as specified and directed. |
| 28 | S&F in double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 29 | S&F in repair aluminium (extruded section) door closer hydraulically regulated, Designation No. 2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 Kg and fixed complete all as specified and directed. |
| 30 | S&F in repair mild steel 300mm ordinary rat tail rod pattern springs incliding roller and roller plate complete all as specified and directed. |
| 31 | S&F in repair 75mm size 4 levers aluminium mortice lock, vertical type complete all as specified and directed. |
| 32 | S&F in repair sheet glass shelf assembly 60 cm long, 12 cm wide, made out of 5.5mm thick glass with CP bracket guard and railing, fancy type, fixed to plug with CP screws and cup washer complete all as specified and directed. |
| 33 | Hacking out old broken glass (any thickness size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with wooden beads complete all as specified and directed. |
| 34 | M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square, area not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 35 | M&L for 3mm thick figured (one side) glass ordinary quality and glazing with oil putty or wooden beads in square, area not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 36 | Refixing shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware and renewal of unserviceable screws complete all as specified and directed. |
| 37 | S&F in repair 18/19mm thick prelaminated medium density fibre board, commercial type, interior grade adhesive as in cup board shutters/shelves and pelmets etc, fixed with screw/nails including 4mm thick teak wood lipping duly french polished alround complete all as specified and directed. |
| 38 | S&F continuous (piano) hinges, mild steel, bright finished or electro galvanised with width of flap 30mm (when open) complete all as specified and directed. |
| 39 | S&F magnetic catches with steel body 'H' type fixed to shutter complete all as specified and directed. |
| 40 | S&F in repair 75mm hasp and staple safety type mild steel, wire type stove enamelled black, including bolt to hinge plate and fixed with screw complete all as specified and directed. |
| 41 | S&F 150mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy fixed complete all as specified and directed. |
| 42 | Demolition of brick work built in cement mortar of any description including all quions arches, pillars etc complete all as specified and directed. |
| 43 | M&L for brickwork with sub class 'B' bricks (old size), straight or curved on plan exc 6 mtr mean radius, built in CM 1:6 complete all as specified and directed. |
| 44 | Description same all as per item No 43 here-in-before but except brick (brick used obtained from demolition) |
| 45 | M&L for brick work with sub class 'B' bricks (old size) straight or curved on any radius built in CM 1:4 in half brick thick walls complete all as specified and directed. |
| 46 | Taking down cement plaster on brick or stone walls incl wall tiles etc with raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 47 | M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces complete all as specified and directed. |
| 48 | M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface complete all as specified and directed. |
| 49 | M&L for PCC 1:3:6 type C-1 using (20mm graded stone aggregate) as in bed blocks for hold fast, coping errection of posts etc complete all as specified and directed. |
| 50 | S&F providing and fixing factory made uPVC white color sliding window two track made of extruded profiles with wall thickness of 2.3mm (+/- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm), Sash (42mm x 67mm), Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket 1.2mm (+/-0.2mm) thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] Note : The unit rate quoted by contractor includes all other connected accessories. Net opening will be measured for payment purpose. Area not exceeding 2.00 Sqm each as per manufacturer's specification complete all as specified and directed. |
| 51 | S&F Providing and fixing factory made upvc white colour sliding window three track made of extruded profiles with wall thickness of 2.3mm (+/-0.2mm). Window profile with hollow section with multi chamber, Frame (88mm x 52mm), sliding sash (42mm x 67mm), Sliding mesh Sash (42mm x 57mm), Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware. EPDM gasket, 1.2mm (+/-0.2mm) thick galvanised steel Frame (30mm x 18mm) 2 Nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories]. Note : The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose. Area not exceeding 2.00 Sqm each as per manufacturer's specification complete all as specified and directed. |
| 52 | S&F 4.8mm thick sheet glass ordinary quality in square not exc 0.5 Sqm in each pane new door / window shutter complete all as specified and directed. |
| 53 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm fixed with screw are galvanised wire staple complete all as specified and directed. |
| 54 | S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed. |
| 55 | S&F 18mm thick coloure HDHMR board including cutting, screwing for kitchen cabinet, almirah shelf, wadrobe, shutter with necessary lipping complete all as specified and directed. |
| 56 | S&F 12mm thick coloure HDHMR board including cutting, screwing as in kitchen cabinet, almirah shelf, wadrobe with necessary lipping complete all as specified and directed. |
| 57 | M&L 6mm thick coloured HDHMR board including cutting, screwing as in kitchen cabinet, almirah shelf, wadrobe with necessary lipping complete all as specified and directed. |
| 58 | S&F 100mm long mild steel butt hinges, cold rolled, medium weight complete all as specified and directed. |
| 59 | S&F 100mm long stainless steel butt hinges with steel pin complete all as specified and directed. |
| 60 | S&F for 200mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed. |
| 61 | S&F for 150mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed. |
| 62 | S&F 100mm long anodised aluminium handles, fabricated type complete all as specified and directed. |
| 63 | S&F 150mm long anodised aluminium handles, fabricated type complete all as specified and directed. |
| 64 | S&F 300mm long, aluminium alloy, anodised aldrop door bolt including fixing clips of sheet, cast or exturded section and fixing bolts and 16mm dia bolt of sliding bolts of extruded sections complete all as specified and directed. |
| 65 | S&F in repair 300mm long MS sliding door bolts, plate type, stove enameled black with bright bolt not less than 12mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple, complete all as specified and directed. |
| 66 | S&F 150mm long aluminium alloy floor door stopper, fabricated type complete all as specified and directed. |
| 67 | S&F in repair aluminium door strip with brush fixed as in door bottom fixed with nails or screw complete all as specified and directed. |
| 68 | S&F MS framed work as in doors frame, doors or gates of angle iron, door frame or other section with gusset plate, rails, braces, grill, hold fast, barrel iron doors, ladders, frame balusters, walk way, railing, frame work of water tank etc complete, drilled for fixing of steel sheeting or other covering etc to prepared for hanging or sliding with including either hooks and hinges, also fastening and fixing and similar work confirming to Fe 290 Gde-E-165 complete all as specified and directed. |
| 69 | S&F in repairs 600mm long tubular towel rail, brass chromium plated of 20mm dia complete all as specified and directed. |
| 70 | S&F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm commercial plywood thick and fixed to wooden plugs with chromium plated brass screws and cups washer complete all as specified and directed. |
| 71 | S&F in repair multi utility mirror cabinet with door of size 350mm x 450mm, coloured, divided in to multi shelf, 5mm thick looking mirror of selected quality glass fixed on door and fixed to wall with chromium plated brass screws and cup washers complete all as specified and directed. |
| 72 | S&F in repair 20mm dia stainless steel curtain rod of wall thickness not less than 1mm with both side decorative brakets and fixing brakets complete all as specified and specified. |
| 73 | S&F in repair 25mm dia aluminium powder coated, curtain rails/drapery rod including end brackets and end knobs, stops, rollers complete all as specified and directed. |
| 74 | S&F in repair stainless steel bouble cutain rod bracket brackets having screw for tighting of curtain rod of 20mm dia for fixing of curtain rod, complete all as specified and directed. |
| 75 | S&F in repair stainless cutain rod bracket brackets having screw for tighting of curtain rod of 20mm dia for fixing of curtain rod, complete all as specified and directed. |
| 76 | S&F in repair stainless steel kitchen plate rack of 900mm x 1200mm size (minimum weight 4.50 Kg) complete all as specified. |
| 77 | Dismantling mild steel work of any description in any position complete all as specified and directed. |
| 78 | Dismantling asbestos cement (corrugated, semi-corrugated etc) sheets in roof coverings including ridges complete all as specified and directed. |
| 79 | S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 80 | M&L Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 81 | M&L for steel work in square or rectangular hollow section used as in purlins, rafter, column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, using induction butt welded tubes conforming to IS-4923-1997 grade Yst-310 complete all as specified and directed. |
| 82 | Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and directed. |
| 83 | S&F for PVC wall lining (Hollow) consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed. |
| 84 | S&F in repair 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing with solvent on to wall to make PVC frame as per specifications complete all as specified and directed. |
| 85 | S&F in repair powder coated GI ceiling suspension system false ceiling grid of 600mm x 600mm size and 0.30mm thick {MS galvanized (PPP CGS)} with main tee, cross tee and wall angle grid hanging with 4mm dia Gl wire and roof fasteners or butterfly clips etc complete all as specified and directed. |
| 86 | S&F in repair 4 mm thick non asbestos fiber cement building board of 600mm x 600mm in size (HPSC E-classic) decorative finish fixed to aluminum/CGI frame work with hold down clips in false ceiling complete all as specified and as directed. |
| 87 | M&L preparation of newly steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer with paint sprayer machine, complete all as specified and directed. |
| 88 | Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer with paint sprayer machine complete all as specified and directed. |
| 89 | Preparation of newly plaster surface of wall and applying two coats of oil bound distemper with paint sprayer machine over a coat or two coat of wall care 1mm thick putty complete all as specified and directed. |
| 90 | Preparation of newly plaster surface of wall and applying two coats of cement base paint including one coat of primer with paint sprayer machine complete all as specified and directed. |
| 91 | S&F in repair for rubber door seal 32mm wide and 5mm thick fixed with machine steel screw with washer, complete all as specified and directed. |
| 92 | Schedule of Credit (MINUS) Rs. 1,10,530.00 B/F from Serial Page No. ____ [Note : Details of items for schedule of credit is given on Srl Page No. ___ ] This amount shall be automatically deducted to arrive at tendered sum Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender