Tender For Repair/Maintenance Of Leakage/Seepage, Replacement Of Tiling, Sanitary Items And Other Allied B/R Works In Otm Accn At Wksp Area Of 508 Abw Mil Stn Chheoki
Tender Value
50 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
20 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maintenance Of Leakage/Seepage, Replacement Of Tiling, Sanitary Items And Other Allied B/R Works In Otm Accn At Wksp Area Of 508 Abw Mil Stn Chheoki
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | M&L for 18-20mm thick granite work table rubbed and polished for wall lining/kitchen platform over 12mm thick cement mortar 1:3 thick and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed |
| 3 | M&L for Machine cut kota stone slab flooring 20-25mm thick including over 20mm cement (1:6) screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 4 | M&L for Kota Stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed including backing coat 10mm thick in cement mortar 1:3 including rubbing and polishing complete all as specified and directed. |
| 5 | M&L for mirror polishing on old/new marble/granite/kota stone/stone work wherever is required to give high gloss finish complete all as specified and directed |
| 6 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings dressed stone work and forecast concrete articles, complete all as specified and directed. |
| 7 | M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6 mtr mean radius built in CM 1:6, complete all as specified and directed. |
| 8 | Demolition of cement concrete unreinfoced in ground floor and paving not exc. 15 cm thickness (below or above ground level) and removing the unserviceable materials to a distance not exc. 100 mtr complete all as specified and directed. |
| 9 | M&L for PCC 75mm thick type C-1, 1:3:6 using 20mm graded stone aggregate as in loor/plinth protection and floor/sub base etc complete all as specified and directed. |
| 10 | M&L plain Cement Concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in mass-concrete/foundation or floor complete all as specified and directed |
| 11 | M&L for 25mm thick Cement Concrete type B-0, 1:2:4 (12.5mm graded aggregate) complete all as specified and directed. |
| 12 | M&L for plain Cement Concrete 1:5:10 type E-2 (using 40mm graded stone aggregate) as in mass-concrete/ foundation or floor complete all as specified and directed |
| 13 | M&L 60mm thick rubber moulded glosy finished inter locking paver block with grey cement and pigment of any type and shape the minium compressive strenth not less then 350 Kg/Sqcm as approved complete all as specified and directed. |
| 14 | M&L for Sand filling under floor including watering and consolidation complete all as specified and directed. |
| 15 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, benching, bed block, cills like including weathering and slightly rounded etc including form work complete all as specified and directed. |
| 16 | Dismentling of floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 17 | M&L for Non Skid ceramic coloured tiles 7 to 8mm thick joint free (square/rectagular) area of each tile exceeding 0.06 Sqmm but not exceeding 0.16 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile and laid over and inclduing 15mm thick screed bed layer in CM (1:6) complete all as specified and directed. |
| 18 | M&L for Non Skid ceramic coloured tiles 7 to 8mm thick joint free (square/rectagular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile and laid over and inclduing 15mm thick screed bed layer in CM (1:6) complete all as specified and directed. |
| 19 | M&L for Non Skid ceramic coloured tiles 7 to 8mm thick joint free (square/rectagular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile and laid over and inclduing 15mm thick screed bed layer in CM (1:6) complete all as specified and directed. |
| 20 | M&L for Vitrified coloured tiles 7 to 8mm thick joint free (square/rectagular) area of each tile exc 0.18 Sqm but not exc. 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile and laid over and inclduing 15mm thick screed bed layer in CM (1:6) complete all as specified and directed |
| 21 | M&L for double charged vitrified coloured tiles 7 to 8mm thick joint free (square/rectagular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile and laid over and inclduing 15mm thick screed bed layer in CM (1:6) complete all as specified and directed |
| 22 | M&L for Glazed ceramic tiles in vertical surface 450 x 300 x 7mm thick joint less tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile over and inclduing 10mm thick rendering in CM (1:4) complete etc (1st quality/Premium Quality) complete all as specified and directed. |
| 23 | Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc & prepare to receive new plaster complete all as specified and directed |
| 24 | M&L for 10mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed. |
| 25 | M&L for 10mm thick rendering in CM 1:4 on fair faces of brick work, finished even and fair without using extra cement complete all as specified and directed. |
| 26 | M&L for rendering 5mm thick in CM 1:3 finished even and smooth with out using extra cement in ceiling complete all as specified and directed. |
| 27 | M&L for preparing new plaster surfaces of ceiling and applying two coats of white wash over coat of primer of Chalk whiting on plastered surfaces, complete all as specified and directed. |
| 28 | M&L for preparing new plaster surfaces of wall and applying two coats of oil bond distemper over and including priming coat of interior primer applied @0.90 litre/10 Sqm over minimum 2mm thick wall care putty in two coat, each coat should have 1 mm thick complete all as specified and directed. |
| 29 | M&L for preparing new plaster surfaces of Walls and applying two coats of white wash over coat of primer of Chalk whiting, on plastered surfaces, complete all as specified and directed. |
| 30 | M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gram/litre and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @0.90 litre/10 Sqm over new plaster surfaces of walls complete all as specified and directed. |
| 31 | M&L for Preparation of old decorated surface on ceiling and applying two coat of white wash complete all as specified and directed. |
| 32 | M&L for Preparation of old decorated surface on ceiling and applying one coat of white wash complete all as specified and directed. |
| 33 | M&L for Preparation of old decorated surface on wall and applying two coat of white wash complete all as specified and directed. |
| 34 | M&L for Preparation of old decorated surface on wall and applying one coat of white wash complete all as specified and directed. |
| 35 | M&L for Preparation of old distemper surface and applying one coat oil bound emulsion on wall surfaces white or tinted complete all as specified and directed. |
| 36 | M&L for complete removing existing treatment on wall surface and applying two coats of oil bond distemper over and including priming coat of interior primer applied @0.90 litre/10 Sqm over minimum 2mm thick wall care putty in two coat, each coat should have 1 mm thick complete all as specified and directed. |
| 37 | M&L for Preparation of old decorated surface on wall and applying one coat of cement base paint over plastered surfaces, complete all as specified and directed. |
| 38 | M&L for Preparation of old decorated surface on wall and applying two coat of cement base paint, on plastered surfaces, complete all as specified and directed. |
| 39 | M&L for Preparation of old decorated surface on wall and applying one coat of 100% premium acrylic emulsion paint having VOC less than 50 gram/litre and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/10 Sqm over old surfaces of walls complete all as specified and directed. |
| 40 | M&L for complete removal of existing treatment and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gram/litre and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @0.90 litre/10 Sqm over old surfaces of walls, complete all as specified and directed. |
| 41 | M&L for Preparation of old painted steel surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint), complete all as specified and directed. |
| 42 | M&L for Preparation of old wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 43 | Taking up or down steel/CPVC 15/20/25mm tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 44 | Supply and laying of CPVC 20mm outer diameter pipes SDR 11 & included Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 45 | Supply and laying of CPVC 25mm outer diameter pipes SDR 11 & included Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 46 | S&F 20mm ounter dia CPVC Brass Elbow/Tee/Male/Female Adaptor, Tank Adaptor, Union etc with all fitting and fixed complete to walls, ceilings or laid in floors complete all as specified and directed. |
| 47 | S&F 25mm ounter dia CPVC Brass Elbow/Tee/Male/Female Adaptor, Tank Adaptor, Union etc with all fitting and fixed complete to walls, ceilings or laid in floors complete all as specified and directed. |
| 48 | S&F in repair CP vitreous china soap dish fancy type complete all as specifed and directed. |
| 49 | S&F in repair brass chromium plated, tubular towel rails 20mm dia, D- type, 60 cm long between flanges, complete all as specified and directed. |
| 50 | S&F in repair 600mm long between flanges brass chromium plated towel rack with brackets fixed to wall with chromium plated brass screws complete all as specified and directed. |
| 51 | S&F in repair for 250mm side and 5mm thick fancy type glass corner of shelf with CP brackets etc complete all as specifed and directed. |
| 52 | S&F in repair brass chromium plated shower roses with swivel joints, 125mm size in square / cirular with CP long shank arm of 300mm length including fixing to steel pipe or union, complete all as specified and as directed. |
| 53 | S&F in repair angle cock fancy type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore, complete all as specified and directed. |
| 54 | S&F in repairs bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed. |
| 55 | S&F in repairs bib tap, cast copper alloy with capstan head, CP fancy type with short body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed. |
| 56 | S&F in repair pillar tap fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed. |
| 57 | S&F in repair Health Faucet (ABS body) mild steel chrominium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making fixed in position complete all as specified and directed. |
| 58 | S&F in repair stainless steel handheld Bidet sprayer/Jet spray with mounting Bracket and flexible hose, chrominium plated suitable for water cleset including making fixed in position complete all as specified and directed. |
| 59 | S&F in repair single hole brass CP WHB mixer cock 15mm dia complete all as speicifed and directed |
| 60 | S&F in repair CP brass hot and cold mixer with shower ponit including legs non telephonic fixed in wall for bathroom complete all as specified and directed. |
| 61 | S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300 grams) complete all as specified and directed . |
| 62 | S&F in repair 15mm Bib Tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 15mm-90 grams/20mm-125 grams) complete all as specified and directed. |
| 63 | S&F in repair 15 mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. but with long body (minimum weight 15mm-120 grams) complete all as specified and directed. |
| 64 | S&F in repair 15mm Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 110 grams) complete all as specified and directed. |
| 65 | S&F in repair 15mm Stop Valve of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 90 grams) all as specified and directed. |
| 66 | S&F in repair Waste Coupling of PTMT 40mm (half or full threaded) (minimum weight 60 grams) with waste pipe, suitable for WHB, kitchen sink complete all as specifed and directed |
| 67 | S&F in repair Waste Coupling of PTMT 32mm but suitable for urinals (minimum weight 45 grams (half or full threaded) with waste piep complete all as specified and directed |
| 68 | S&F in repair 40mm waste pipe with 900mm long suitable for kitchen sink and wash basin complete all as specified and directed |
| 69 | S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm, complete all as specified and as directed. |
| 70 | S&F in repair steel grating doom 110mm dia of CP (minimum weight 60 grams) for wash basin/floor fixed over trap with white cement complete all as specified and as directed. |
| 71 | Dismantling of cast iron or renforced drain pipe 100mm/75mm dia of any description complete all as specified and directed. |
| 72 | S&F cast iron soil, waste and vent pipe100mm dia in any length with or without ear, with cement joint, laid in trenches or in wall complete all as specified and directed. |
| 73 | S&F 100mm cast iron sanitary connection socket to fit WC outlet complete all as specified and directed. |
| 74 | S&F for 100mm cast-iron sanitary connection bend (92½0) with arms 380 to 450mm excluding joint complete all as specified and directed. |
| 75 | S&F for 100mm cast iron sanitary connection ‘S’ branch with branch 370 to 450mm long excluding joint complete all as specified and directed. |
| 76 | Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed. |
| 77 | S&F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed |
| 78 | S&F of 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed |
| 79 | S&F PVC SWR (110) bends any radius comlete all as specified and directed. |
| 80 | S&F 75mm PVC (SWR) junction single, (single T) (equal or unequal), ordinary or inverted (spigot or socket type) or with paralle oval access doors branches complete all as specified and directed. |
| 81 | S&F 110mm PVC (SWR) vent cowl complete all as specified and directed. |
| 82 | M&L 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 83 | M&L PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed. |
| 84 | S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roofs for bore of 100mm complete all as specified and directed. |
| 85 | S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roofs for bore of 75mm complete all as specified and directed. |
| 86 | Dismantling tanks water tank exc 250 ltrs but not exc 500 ltrs complete all as specified and directed. |
| 87 | Dismantling tanks water tank exc 500 ltrs but not exc 1000 ltrs complete all as specified and directed. |
| 88 | S&F rotational moulded polythene water storage tank of capacity 500 ltrs (cylindrical/vertical with closed top), triple layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with fitting etc of 20mm dia directed complete all as specified and directed. |
| 89 | S&F rotational moulded polythene water storage tank of capacity 1000 ltrs (cylindrical/vertical with closed top), triple layer construction, in white colour ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with fitting etc of 20mm dia directed complete all as specified and directed. |
| 90 | S&Fin repair ball valve/float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 grams complete all as specified and directed. |
| 91 | S&F in repair stop valves/gate valves 25mm dia cast copper alloy, screwed down, high pressure with crutch or butterfly handel, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 92 | S&F in repiar Rotational moulded polyethylene water storage lid tanks cover for 500/1000 ltrs (cylindrical vertical with closed top) fixed in position complete all as specified and directed. |
| 93 | Cleaning and removing all scale and dirt etc, from tanks and from mouths of circulating pipes etc, capacity exc 250 ltrs not exc 500 ltrs and disconnecting existing tanks setting aside (or lowering if required) for repairs, cleaning etc and hoisting if reuiqred reconnecting and refixing in position including writing date of cleaning and due date with white/black paint over tank wall complete all as specified and directed. |
| 94 | Cleaning and removing all scale and dirt etc, from tanks and from mouths of circulating pipes etc, capacity exc 500 ltrs not exc 1000 ltrs and disconnecting existing tanks setting aside (or lowering if required) for repairs, cleaning etc and hoisting if reuiqred reconnecting and refixing in position complete all as specified and directed. |
| 95 | S&F in repair Sheet Glass Shelf assembly consisting of 5.5mm thick sheet glass shelf 120mm (minimum) wide with chromium plated brass bracket guard and railing 600mm long complete all as specified and directed. |
| 96 | S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including S&F trap set complete all as specified and directed. |
| 97 | S&F in repairs Water Closet European pattern (EWC) and trap including connection to drain or outgoing pipe & to flush pipe, anti syphonage pipe etc complete all as specified and directed. |
| 98 | S&F in repairs PVC Flushing Cistern 10 ltrs capacity valve less syphonic action type low level with and including dual flush ball valve float & handle, waste pipe & brackets complete set complete all as specified and directed. |
| 99 | S&F in repai Vitreous China Wash Basin, flat back, size 450 x 300mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets, complete all as specified and directed. |
| 100 | M&L cutting chases brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends and making good cutting exceeding 20 cm girth for concealed water tubing or concealed conduit wiring etc complete all as specified and directed. |
| 101 | S&F in repair one piece Vitreous china wash down water closet (Pedestal Pattern) size 645mm x 35mm x 730mm 'white' with soft close seat cover & twin flush fittings, toilet paper holder, health faucet, PVC connection, angular stop cock (valve) (2 Nos) with flange etc complete all as specified and directed. |
| 102 | S&F in repair vitreous china wall hung wash hand basin with pedestal snow white miniumum size 630mm x 450mm including chromium plated brass coupling, bottle trap, chromium plated brass centre hole basin mixer, 450mm PVC braided connection (two numbers), angular stop cock (valve) (two numbers) complete all as specified and directed. |
| 103 | S&F in repairs plastic water closet sheet cover of any color closed pattern with flat bottom and cover and MS chroumium plated or aluminium hinges devices etc complete all as specified and directed. |
| 104 | S&F in repair Vitreous China Urinal, half stall type, white including connections to flushing pipe and outgoing pipes complete all as specified and directed. |
| 105 | S&F in repair 900mm x 450mm and 10mm thick frosted urinal glass partition bevelled edge fancy type mounted on wall and fixed with fasterners minimum 3 Nos on each glass complete all as specified and directed. |
| 106 | S&F in repai CP fancy type toilet paper holder of size 150mm complete all as specified and directed. |
| 107 | S&F in repair CP fancy type towel ring of size 150mm dia complete all as specified and directed. |
| 108 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation oards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 109 | Providing & fixing ceiling with mineral fiber 12mm thick micro tegular edged false ceiling tiles at all height, false ceiling tiles of size 595 x 595mm of approved texture design patterns having moisture content less than 2%, humidity resistance of 99%, as per IS 8225:1987, light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of PVC coated Anodised aluminium snap grid frame work for false ceiling comprising of main-T runners of size 15 x 32mm of length 3000mm, cross-T of size 15 x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling at approprite height from floor using galvanized mild steel wire and L- shape level adjuster of size 85 x 25 x 2mm Anodised aluminium perimeter wall angle of size 24 x 24 x 0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing, complete all as specified and directed. |
| 110 | S&F for anodised aluminium snap grid frame work od size 605 x 605mm for false ceiling complete all as specified and directed. |
| 111 | M&L for 4mm thick Non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws complete all as specified and directed. |
| 112 | S&F for corrogated PVC Wall lining/cladding consisting of 7 to 8mm thick any colour or pattern inclusive of solvent cement and fixing at site on PVC frame with nails as per specifications and drawing complete all as specified and directed. |
| 113 | Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed. |
| 114 | Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed. |
| 115 | M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/window/ ceosetory windows & other frames/chowkhat of size 50 x 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 grams) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge. complete all as specified and directed. |
| 116 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/window/ ceosetory windows & other frames/chowkhat of size 50 x 125mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 grams) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge. complete all as specified and directed. |
| 117 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type skelton door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. |
| 118 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type glazed and skeleton door shutters 30mm thick, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 grams) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. |
| 119 | M&L for Solid PVC Frame for door, kitchen cabinet, cupboard of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed. |
| 120 | S&F Factory made solid panel PVC door shutter 30mm thick (style) both side prelam pvc sheet of decortive choice consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 121 | S&F for 100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 122 | S&F for 150mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 123 | S&F for 150mm long Aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 124 | S&F for 200mm long stainless steel handles, fabricated type complete all as specified and directed. |
| 125 | S&F for 150mm long stainless steel barrel tower bolts of extruded section complete all as specified and directed. |
| 126 | S&F 300mm long stainless steel with dia 16mm, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or stainless steel complete all as specified and directed. |
| 127 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 128 | M&L for framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 129 | S&F for powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions i.e at top, bottom and sides with required EPDM rubber/neoprene gasket locking arrangements as per sample approved by GE. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/paneling, C.P brass/stainless steel screws, complete all as per architectural drawings, complete all as specified and directed. |
| 130 | S&F for 5mm thick glass for partiton/door/window/ventilator fixed with EPDM rubber/neoprene gasket in alumnium section and fixed with putty in steel section all complete as per architectural drawings, complete all as specified and directed. |
| 131 | S&F in repair for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed. |
| 132 | M&L for PCC 1:3:6 type C-1 using 12.5mm granted stone aggregate as hold fast/filling in pressed steel frame complete all as specified and directed. |
| 133 | M&L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 134 | S&F in repair 600mm x 450mm and 6mm thick bevelled edge looking mirror fancy type mounted on wall with chromium plated brass screws with spacer and cup washer fixed on wall complete all as specified and directed. Please Enable Macros to View BoQ information |
| 135 | S&F in repair 600mm x 450mm and 6mm thick bevelled edge looking mirror fancy type mounted on wall with chromium plated brass screws with spacer and cup washer fixed on wall complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 days