Tender For Dismantling, Repair And Renovation Of Auditorium Stage Including Flooring And Structural Works At Iim Raipur C Us.
Tender Value
35 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
19 days left
EMD
70000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raipur → Chhattisgarh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Dismantling, Repair And Renovation Of Auditorium Stage Including Flooring And Structural Works At Iim Raipur C Us.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and systematic removal |
| 2 | Dismantling and systematic removal of existing wooden stage flooring including boards/planks, battens, supports, nails, screws, fixtures, and all associated components at all heights and levels, with due care to avoid damage to adjoining structures and services. The work shall include segregation of serviceable and unserviceable materials, stacking of reusable items as directed by the Engineer-in-Charge. Unserviceable materials/debris shall be collected, loaded, and transported outside the premises through trucks or other approved means, including disposal as per local regulations. The contractor shall ensure complete site clearance, cleaning, and removal of dust and debris. All labour; tools, tackles, safety measures, lead, lift, and incidental charges shall be deemed included in the item. |
| 3 | Providing, laying, and fixing factory-finished |
| 4 | Providing, laying, and fixing factory-finished 12 mm thick engineered wooden flooring of approved make, having precision-milled tongue-and-groove joints, over existing framework and plywood sub-base, ensuring proper alignment, level, and surface uniformity. The installation shall be carried out using headless nails/approved concealed fastening system with necessary adhesives wherever required, maintaining strict workmanship standards. A uniform expansion gap of minimum 10 mm shall be provided along all peripheries, filled with suitable edge protection/profile to accommodate thermal and climatic variations. The work shall include surface preparation, cleaning, conditioning of substrate, and moisture control measures to ensure long-term performance. All boards shall be free from defects, properly matched for grain and shade, and installed to achieve a seamless finish. The scope shall include cutting, trimming, edge finishing, and protection during execution. Complete in all respects including labour, materials, tools, wastage, and quality compliance as per direction of Engineer-in-Charge. |
| 5 | Providing and fixing two layers |
| 6 | Providing and fixing two layers of 12 mm thick marine grade plywood (IS 710 certified) in staggered/joint-offset pattern over a rigid sal wood framework of section 50×50 mm, accurately aligned and installed at 450 mm c/c, ensuring structural stability and level tolerance. The framework shall be securely anchored to the floor using MS angle cleats at 600 mm c/c, incorporating 5 mm thick neoprene isolation pads to minimize vibration and moisture transfer. The voids within the framework shall be uniformly filled with 25 mm thick, 800 GSM thermally bonded polyester wadding for acoustic and thermal insulation. The work shall include precise cutting, edge alignment, screw fixing with anti-corrosive fasteners, and surface levelling to achieve a uniform base. All materials shall be of approved quality, free from defects, and installed as per best engineering practices. Complete with all labour, tools, wastage, handling, and finishing, as directed by the Engineer-in-Charge. The cable raceways work, as directed and approved by the Engineer-in-Charge, Indian Institute of Management Raipur shall be in the contractor’s scope of work |
| 7 | Providing and carrying out anti-termite treatment |
| 8 | Providing and carrying out anti-termite treatment to stage sub-floor and wall junctions using approved chemicals such as Imidacloprid 30.5% SC and/or Chlorpyrifos 20% EC (or equivalent), strictly in accordance with IS 6313 (Part-II) specifications. The treatment shall be executed by preparing emulsion at the specified dilution ratio (1 litre chemical in 20 litres of water) and applied uniformly through spraying/injection methods. The scope shall include drilling of holes at required intervals, injection under pressure, and sealing of holes with approved materials to ensure complete penetration. All junctions, cracks, and contact surfaces shall be thoroughly treated to create an effective chemical barrier. The work shall include surface preparation, cleaning, and removal of obstructions prior to application. Proper safety measures, handling procedures, and environmental precautions shall be followed. Complete with all labour, materials, tools, and equipment to ensure long-term protection as directed by the Engineer-in-Charge. |
| 9 | Labour Cess @ 1 % of total of Sr.no 1 to Sr.no 4 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 days