Tender For (The Work For Maintenance And Repair Of L.T Line, 11 K.V. Line And 33 K.V. Line (Pole Replacement, Repairing Of S.T.P. Etc.) To Ensure Uninterrupted Supply In The Area Of Uedd-Rajghat, Varanasi Under Ee, Uedd-Machhodari, Varanasi In O&M Sc
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Jul 2026
1 days left
EMD
10000
Bank guarantee accepted
Document Fee
3835
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Varanasi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for (The Work For Maintenance And Repair Of L.T Line, 11 K.V. Line And 33 K.V. Line (Pole Replacement, Repairing Of S.T.P. Etc.) To Ensure Uninterrupted Supply In The Area Of Uedd-Rajghat, Varanasi Under Ee, Uedd-Machhodari, Varanasi In O&M Scheme 2026-27.)
BOQ
| Sl. No. | Item Description |
| 1 | Work for LT Line |
| 2 | Repairing of 8/9 Meter damage/rusted steel tubular pole by digging of pit around the pole of size 1.0 mtr x 1.0 mtr x 1.0 mtr is to be done for proper positioning and then cleaning of rust and descaling with the help of hard wire brush & chisel and then putting 3 Nos. angle size 50x50x10 mm, 3 ft long properly welding the angles around pole to give robust structure. After completing of above work grouting and muffing of pole 300 mm above ground level with cement, concrete, sand and bricks ballast. |
| 3 | Replacement of 8/9 Mtr. L.T. Damage Pole with STP/PCC pole by digging of pit around the pole of size 1.0 mtr x 1.0 mtr x 1.0 mtr is to be done for proper positioning and then cleaning of rust and descaling with the help of hard wire brush & chisel and then putting 3 Nos. angle size 50x50x10 mm, 3 ft long properly welding the angles around pole to give robust structure. After completing of above work grouting and muffing of pole 300 mm above ground level with cement, concrete, sand and bricks ballast including carriage of new pole From Store to site & Damage pole from site to store (excluding PCC Pole) and other necessary work with material eg. earthing of pole, Shackle Insulator, Holding Clamp, Nut & Bolts of different Size Cross Arm. |
| 4 | Work for 11 K.V. Line |
| 5 | Repairing of 9/11 Meter damage/rusted steel tubular pole by digging of pit around the pole of size 1.0 mtr x 1.0 mtr x 1.0 mtr is to be done for proper positioning and then cleaning of rust and descaling with the help of hard wire brush & chisel and then putting 3 Nos. angle size 50x50x10 mm, 3 ft long properly welding the angles around pole to give robust structure. After completing of above work grouting and muffing of pole 300 mm above ground level with cement, concrete, sand and bricks ballast. |
| 6 | Replacement of 9/11 Mtr. 11 KV Line Damage Pole with STP/PCC pole by digging of pit around the pole of size 1.0 mtr x 1.0 mtr x 1.0 mtr is to be done for proper positioning and then cleaning of rust and descaling with the help of hard wire brush & chisel and then putting 3 Nos. angle size 50x50x10 mm, 3 ft long properly welding the angles around pole to give robust structure. After completing of above work grouting and muffing of pole 300 mm above ground level with cement, concrete, sand and bricks ballast including carriage of new pole From Store to site & Damage pole from site to store (excluding PCC Pole) and other necessary work with material eg. earthing of pole, Shackle Insulator, Holding Clamp, Nut & Bolts of different Size Cross Arm. |
| 7 | Work for 33 K.V. Line |
| 8 | Repairing of 9/11 Meter damage/rusted steel tubular pole by digging of pit around the pole of size 1.0 mtr x 1.0 mtr x 1.0 mtr is to be done for proper positioning and then cleaning of rust and descaling with the help of hard wire brush & chisel and then putting 3 Nos. angle size 50x50x10 mm, 3 ft long properly welding the angles around pole to give robust structure. After completing of above work grouting and muffing of pole 300 mm above ground level with cement, concrete, sand and bricks ballast. |
| 9 | Replacement of 11/13 Mtr. 33 KV Line Damage Pole with STP/PCC pole by digging of pit around the pole of size 1.0 mtr x 1.0 mtr x 1.0 mtr is to be done for proper positioning and then cleaning of rust and descaling with the help of hard wire brush & chisel and then putting 3 Nos. angle size 50x50x10 mm, 3 ft long properly welding the angles around pole to give robust structure. After completing of above work grouting and muffing of pole 300 mm above ground level with cement, concrete, sand and bricks ballast including carriage of new pole From Store to site & Damage pole from site to store (excluding PCC Pole) and other necessary work with material eg. cross arm, earthing of pole, Shackle Insulator, Holding Clamp, Nut & Bolts of different Size Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender