Tender For Construction Of Girls Toilet At Govt. Middle School Parray Mohalla Hajin.
Tender Value
1.75 Lakhs
Estimated cost
Bid Submission
08 Jul 2026
6 days left
EMD
3500
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganderbal → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Girls Toilet At Govt. Middle School Parray Mohalla Hajin.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width as well as 10 Sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed. |
| 2 | P/L of dry stone soling duly hand packed including all carriages loading unloading complete job before laying of mud mate in trenches incl. all carriages of material involved & head load. |
| 3 | P/L in position cement concrete of specified grade excl. the cost of centering and shuttering: 1:4:8 (1 cement 4: coarse sand 8 graded stone crushed agg.40mm nominal size). Incl all carraiges of material involved. |
| 4 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 150, landings, balconies, shelnes, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases upto floor V level excluding cost of centering, shuttering, finishing and reinforcement with (M-20 Mix) 1:1.5:3 (1 Cement: 1.5 Coarse Sand: 3 graded stone aggregate 20mm nominal size- crushed.) Incl all carraiges of material involved. |
| 5 | Providing and laying in position specified grade of Reinforced cement concrete M20 (1 : 1.5 : 3) excluding the cost of centering, shuttering, finishing and reinforcement.All works upto plinth level including carriage complete. |
| 6 | Providing/laying in position specified grade excluding the cost of centering & shuttering . (M-10 Mix) 1:3:6 (1 Cement: 3 Coarse Sand: 6 graded stone aggregate 20mm nominal size- crushed.) Incl all carraiges of material involved. |
| 7 | Centring and shuttering including strutting proping and removal of form work for foundations, footings, bases of columns slabs etc for mass concrete. |
| 8 | Centring and shuttering including strutting proping and removal of form work for suspended floors, slabs. |
| 9 | Reinforcement for RCC works including straightening cutting bending placing in position and binding all complete (Thermomechanically Treated Bars) Incl. carraige and head load |
| 10 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 11 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 12 | Providing and fixing of wood work in frames of door/ window /arch windows /ventilator wrought frames (chowkats) imported KD |
| 13 | Providing and fixing Ceramic glazed wall/floor tiles 450x300mm (thickness to be specified by the manufacturers) make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete. |
| 14 | 12mm thick cement plaster on the rough side of single or half brick walls of mix 1:6 ( 1 cement :6 coarse sand) |
| 15 | Providing and laying of cement concrete rings 3' wide in soakage pit includind excavation and a cover slab all complete job |
| 16 | providing and placing on terrace polythene water storage tanks ISI 12701 marked indicating the BIS license no with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and base support |
| 17 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random all types fittings involved. This includes testing of joints complete as per direction of Engineer-in charge PN-16 pipe, 16mm OD(SDR-7.4) |
| 18 | Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) \\"manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. |
| 19 | providing and fixing soil waste, vent pipes 100mm including tees bends all complete job |
| 20 | providing and fixing soil waste, vent pipes 75mm including bends all complete job |
| 21 | providing and fixing CI bib cocks 15 mm of approved make and desire |
| 22 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and celerestory windows including ISI mark black enamelled butt hinges with necessary screws incl panelling of door shutters and glazing of windows 30mm thick imported wood |
| 23 | Painting with synthetic enamel paint two or more coats on wood work of approved brand and manufacture to give an even shade on wood work including a coat of primer. |
| 24 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 25 | Providing and fixing of hardware items of good quality including cost of screws all complete job :- Handles 5\\" |
| 26 | T bolt 5\\" |
| 27 | T bolt 4\\" |
| 28 | Latch locks |
| 29 | Providing and fixing of soap case of approved quality |
| 30 | Floor Trap 4\\" |
| 31 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete, 15 mm nominal bore |
| 32 | Providing and fixing of Gate value of approved quality |
| 33 | Providing and fixing of health faucet of approved quality. |
| 34 | Providing and applying white cement based putty/POP of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2mm Thick Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender