Tender For Petty Repair To Misc B/R Items Wks Including Day To Day Complaints In Aor Of Age B/R-Iv Of Ge (South) Meerut Cantt.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
17 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Petty Repair To Misc B/R Items Wks Including Day To Day Complaints In Aor Of Age B/R-Iv Of Ge (South) Meerut Cantt.
BOQ
| Sl. No. | Item Description |
| 1 | Material and labour for rectifying the leakage of wall mixer/wash hand basin/sink Grant mixer including replacement of brass spindle & PVC washers necessary fixtures etc complete all as specified and directed.(a) Complaint slip shall collected by the contractor/ supervisor from MES (TPP complaint cell at AGE B/R IV at 9:00 Hrs and submit the same FOR duly signed by the occupant at 16:30 Hrs in the complaint cell. It will be THE responsible of contractor to ensure their attendence & complaints.(b) If any complaint not resolved within 24 Hrs the recovery @ Rs 500/- per complaint per day will be charged from RAR OR Final bill.(c) The contractor will ensure the clearing of all complaints (irrespective of Nos ) with in 24 Hrs by deploying addl tradesman if needed. Nothing extra will be paid on this account.(d) Contractor shall be solely responsible for supplying all the safety measure required by the tradesman during working hours.(f) The contractor will ensure presence of two tradesman every day to resolving of the all the complaint regarding this contract every day.(e) the above note is applicable for all nature of complaint pertains to this contract. |
| 2 | Material and labour for reparing of old wooden doors by repairing projecting/friction, type hinges, handle, bolts etc as required and providing new as required complete all as specified and directed |
| 3 | Easing of window shutters/CB (One unit shall comprise of one complete window/CB/Showcase irrespective of number of leaves) to ensure smooth closing/opening including tightening of hinges, adjustement of tower bolts, sliding bolt etc complete all as specified. |
| 4 | Petty repairs to low level flushing cistern adjustement of syphon, replacement of washer, asjustement of handle, float valve as requried making the cistern functional complete as directed. |
| 5 | Petty repairs to bib taps, pillar taps, stop cock angle valves etc concealed stop cock etc for stopping leakage of water by replacing washer etc complete all as specified and directed. |
| 6 | Removal of air lock, blocking in water pipes/bib taps/stop valve incl cleaning pipes as requried and as directed to ensure proper flow of water complete all as specified. |
| 7 | Removal of blockage in rain water pipe by cleaning grating and rodding in pipes, refixing gratting in position complete all as specified and directed. |
| 8 | S&F in repair Origin LED Touch Sensor circular Glass Wall Mounted Light Mirror for Bathroom (White, 24 inch) of selected quality to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 9 | Material & labour for powder coated GI frame work(snap grid) suitable for size as in false ceiling of size 605mm x 605mm including fixing 4mm thick gypsum board/E board in ceiling size 60cm x 60cm fixed to metacil snap gird and dismantling wall and ceiling boards or insulation boards/slabs any thickness including cover fillets, consisting of followings and all as directed:-i) Powder coated GI sections incorporated in frame work shall conform to designation 63400 given in IS: 737-1986. ii) The snap grid shall consist of powder coated main /cross tee of size 36.5mmx25mmx1.0mm thick and 25mm x 25m x1.0mm thick, respectively. iii) Snap grid frame shall be fixed to ceiling with supporting hangers consisting of S & F 2mm to 4mm dia mild steel GI wire. iv) The main and cross tees shall be jointed at junction/crossings with powder coated GI angle bracket, of size 15mmx15mmx1.0mm thick, fixed with suitable mild steel, bolts, nuts and washers all as per manufacturer’s instructions. v) The snap grid (main/cross tee section) shall be supported at ends all along the wall with powder coated GI angle of size 25mmx25mmx1.0 mm anodized thick. vi) Size of the snap grid shall be 605mm by 605mm. |
| 10 | M&L for 6mm thick fibre cement, corrugated or semi-corrugated shets in roofs, walls, etc. Fixed with L-type or J-type or cranked hook bolts including Dismantling of old sheet any description as in roof covering incl ridge and removing from site complete all as specified & directed. |
| 11 | M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding / ridges, fixed with self tapping screws/ J hooks complete all as specified and specified including taking down of old Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 12 | M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding / ridges, fixed with self tapping screws/ J hooks complete all as specified and specified. including taking down of old Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 13 | Material and labour for Water proofing treatment to sunken floors of kitchen, toilets, laboratories, bath ancWC's etc shall be as under :-(a) Taking out/ down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of the rubbish from the site of work to a distance exc 200 m compete all as specified and directed.(b) Application of Two component Acrylic modified cementitious coating(i) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance, existing coatings and achieve a gripping profile that is clean, dry and free from laitance and any other form of surface contamination.The installation instructions in manufacturer's published literature should be strictly complied with, including but not limited to the following(ii) Chipping out any visible cracks in \\"V-Groove\\" pattern as applicable. Special attention on this part.Cleaning of cracks & then filling those cracks with SIKA latex SBR 100 putty/ Dr Fixit 302 SBR latex / Perma latex SBR / FOSROC Nitabond SBR latex / Asian Paints latex as required. Final cleaning of surface with power grinder, wire brush, hair brush & vacuum pressure if required.(iii) Dampen all surfaces immediately ahead of application of Acrylic modified Cementitious coating of SikaTop Seal - 107 / Brush Bond FOSROC/ Dr Fixit/ STP/CICO.(iv) Whilst the surface is still damp from saturation (S.S.D), apply one coat of Acrylic modified Cementitious coating of Sika Top Seal - 107 / Brush Bond FOSROC/ Dr Fixit/ STP/CICO of viscosity as per manufacturer's instructions.|(v) Apply Glass Fabric Sheet of Sika Fab 1 / FOSROC/ Dr Fixit/ STP whilst the first coat is wet. (vi) Once touch dry, apply second coat of Acrylic modified Cementitious coating of Sika Top Seal - 107 / Brush Bond FOSROC/ Dr Fixit/ STP/CICO of viscosity as per manufacturer's instructions on the entire area. (vii) Second coat shall be applied after 6-8 Hrs of application of previous coat and in the direction right angle to the previous coat. |
| 14 | Taking down existing water proofing treatment from top of RCC/arch slab, including PCC Padding or plaster or brick bats and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as spefied and directed. |
| 15 | M& L for PCC padding 1:2:4 type B1(using 20 mm graded stone aggregate) average thickness 25mm,finished fair and even without using extra cement on roof surfaces complete all as specified and directed. |
| 16 | Material and Labour for 15mm thick cement paster in CM 1:4 mixed with WPC as per the manufacturers instructions finised even and smooth without using extra cement on roof surface when concreate is green and wall (WPC will be measured and paid seperately as supply only rate) complete all as specified and directed. |
| 17 | Material & labour for cleaning of concrete surfaces and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed by evenly a track coat @ 1.20 kg per Sqm using with 85/25 grade industrial bitumen , over it laid with APP modified polymeric water proofing membrane with non-woven polyester reinforced of weight not less than 3 kg per Sqm unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using with 85/25 grade industrial bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.200 kg per Sqm as per manufacturer’s instructions complete all as specified and directed. |
| 18 | Supply only integral water proofing compound complete all as specified and directed |
| 19 | S&F as in repair PVC 'P' or 'S' trap, ISI marked, suitable for 100 mm bore CI spun pipes complete all as specified. |
| 20 | Material and labour for as in repair for standard kit of PVC internal fittings for low level flushing cistern fixed complete all as spd and directed. |
| 21 | Supplying and laying in repair of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling with proper clips and other required fittings and fixings or laying in floors including all the required fittings such as elbows, T, union, socket , reducers, also including CPVC Brass fittings (Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor etc), Unions, Ball valves, Flange and tank adaptor complete all as specified. Note- the rate quoted shall be inclusive of all the fittings mentioned above and no additional payment shall be paid to the contractor for the fittings/fixings neccessary. |
| 22 | Supplying and laying in repair of CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling with proper clips and other required fittings and fixings or laying in floors complete all as specified all the required fittings such as elbows, T, union, socket , reducers, also including CPVC Brass fittings (Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor etc), Unions, Ball valves, Flange and tank adaptor complete all as specified. Note- the rate quoted shall be inclusive of all the fittings mentioned above and no additional payment shall be paid to the contractor for the fittings/fixings neccessary. |
| 23 | S&F as in repair 15mm bore pillar tap, long shank, swan neck, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts complete all as specified & directed. |
| 24 | S&F as in repair 15 mm bore bib tap long body chromium plated, cast copper alloy, with crutch or butterfly handle, flange, screwed down for iron pipe or for brass ferrule, complete all as specified and directed. |
| 25 | Supply & fix in repair wall mixer brass chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15mm bore pipes with Provision for outlet to shower complete all as specified and directed. |
| 26 | S&F in repair 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union.complete all as specified and directed. |
| 27 | S&F in repairs 15 mm thick Bip tap standard of PTMT any colour screwed for iron pipe and fixed (Minimum weight 15mm - 90gms/20mm-125gms).complete all as specified and directed. |
| 28 | S&F in repair Single Piece WC With PP Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, Size: 360x640x685 mm including replacement of S Trap- 110 mmcomplete all as specified and directed by Engineer-in-Charge. Make : Jaquar SLS-WHT-6851S110PP or equivalent as approved by GE) |
| 29 | S&F as in repair vitreous china squatting pan Orissa pattern, size 580 x 440mm, white, with integral footrest, including flushing cistern & flush pipe fixed as in repair with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface.complete all as specified and directed. |
| 30 | S&F as in repair vitreous china wash down water closet pan (pedestal pattern), white (flushing cistern and flush pipe) fixed with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed. |
| 31 | Supply and fixing as in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor. complete all as specified. |
| 32 | Supply & fix in repair white plastic seat cover for W.C.(E.T.) white including M.S. CP or aluminium hinging device complete all as specified and directed. |
| 33 | S&F as in repair Vitreous China wash basin, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified and directed. |
| 34 | Supply & fix in repairs chromium plated shower roses with swivel joints of 75mm size complete all as specified & directed. |
| 35 | S&F in repair chromium plated Jet spray with suitable flexible pipe to EWC for 15mm bore with fittings, complete all as specified and directed. |
| 36 | S&F in repair chromium plated health faucet with 1.00 mtr flexible pipe for 15mm bore with fittings, complete all as specified and directed. |
| 37 | Supply & fix in repairs PVC connections of 450mm long Make suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed. |
| 38 | Supply and fix in repairs PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed. |
| 39 | S&F in reipair CP towel rail brass 20mm dia 600mm long with bracket CP finish complete all as specified and directed. |
| 40 | Providing, fitting, and fixing in repair 5-Bar wall-mounted towel rack (Double-decker style), made of heavy-duty Grade 304 Stainless Steel with a mirror-polished chrome finish. It consists of a top slatted shelf for folded towels and 5 lower hanging bars for towels, complete with heavy-duty mounting brackets, concealed fittings, stainless steel screws, and PVC dash fasteners, installed as directed by the Engineer-in-Charge. (Approved Equivalent |
| 41 | S&F in repair for 600 x 450 mm beveled edge mirror of selected quality glass mounted on wall on 8mm thick plain edge smooth finished with bolts inserted in wall as specified and directed. |
| 42 | S&F in repair Glass Corner Shelf fitted in wall with screws complete all as specified and directed |
| 43 | Supply & fixing in rotational moulded polyethylene water storage tanks 500 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mm PVC ball valve including dismantling existing water tanks complete all as specified & directed. |
| 44 | Supply & fixing in rotational moulded polyethylene water storage tanks 1000 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mm PVC ball valve including dismantling existing water tanks complete all as specified & directed. |
| 45 | S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm- 690 gms) complete all as specified and directed. |
| 46 | S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 15 mm dia.complete all as specified and directed. |
| 47 | S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia.complete all as specified and directed. |
| 48 | Supply and fix PVC Pipes single socketed in any length with rubber ring joints, fixed to walls etc. 75mm bore as in waste and rain water pipes including stack clamps made out of 25mm by 5mm flat iron and 16mm dia round iron stays including bolts & nuts, laid complete all as specified & directed. |
| 49 | Supply and fix PVC Pipes single socketed in any length with rubber ring joints, fixed to walls etc. 110 mm bore as in waste and rain water pipes including stack clamps made out of 25mm by 5mm flat iron and 16mm dia round iron stays including bolts & nuts, laid complete all as specified & directed. |
| 50 | Supply and fix in repair PVC bends 75mm bore, any radius complete all as specified & directed. |
| 51 | Supply and fix in repair PVC bends 110 mm bore, any radius complete all as specified & directed. |
| 52 | Supply and fix in repair for 75mm bore PVC floor traps plain with grating fixed in repairs including jointing with solvent cement complete all as specified & directed. |
| 53 | Supply & fix in repairs steel C.P. grating 100/125 mm dia waste pipe hole fitted as required at site complete all as directed by Engineer-in-Charge. |
| 54 | S&F 15 mm bore concealed stop cock, chromium plated, cast copper alloy, screwed down with crutch or butterfly handle screwed both ends, as in repair including flench complete all as specified & directed. |
| 55 | Material & labour for vitrified coloured tiles of size 1200x600x8-10mm thick coloured, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) including Dismantling of old tiles complete all as specified & directed. |
| 56 | Material & labour for vitrified coloured tiles of size 600x600x8-10mm thick coloured, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) including Dismantling of old tiles complete all as specified & directed. |
| 57 | Material & labour for non-skid coloured ceramic tiles of size 400x400x7-8mm thick, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 15mm thick cement screed bed of CM (1:6) including dismantling of old tiles complete all as specified & directed. |
| 58 | Material & labour for glazed coloured ceramic tiles of size 600x300x6-7mm on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:6 including dismantling of old tiles complete all as specified & directed. |
| 59 | Material & labour for glazed coloured ceramic tiles of size 450x300x6-7mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:6 including dismantling of old tiles complete all as specified & directed. |
| 60 | S&F PVC Wall Lining consisting of PVC Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing PVC Insulated Panel with Single Side Prelam PVC sheet used instead of plain colour sheet thickness of insulated insulated PVC wall PVC wall lining 6 mm including Dismantling of boarding, any description, fixed in any position with nailscomplete complete all as specified and directed. |
| 61 | M&L for anodised aluminium partition with/without sash bars, aluminium sections weighing 0.55 Kg/m(min) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading,screws suitable anodised fittings, including anodised aluminium frame with one or more rebates including S&F 5 to 6 mm thick glass all fixed to frame complete all as specified and directed. |
| 62 | M&L for Brickwork with subclass ‘B’ bricks old size , straight or curved on plan exc 6m mean radius, built in CM (1:6), straight or curved on plan exc 6m mean radius, built in CM (1:6) including complete all as specified and directed including dismantling of brick work |
| 63 | M&L for rendering 15mm thick in patchy on fair faces of brick work or concrete surfaces finished even and fair on walls in cement mortar (1:4), complete all as specified. Including taking out of old plaster from brick walls or concrete surfaces i complete all as specified and directed. |
| 64 | M&L for rendering 15mm thick in patchy on fair faces of brick work or concrete surfaces finished even and fair on walls in cement mortar (1:4), complete all as specified. Including taking out of old plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed. |
| 65 | M&L for Rendering 10 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified. Including taking out of old plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed. |
| 66 | M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in Plinth protection/Path , finish even & smooth without using extra cement all as specified and directed. Including demolition of old cement concrete complete all as specified and directed. |
| 67 | M&L for three coats of white washing on new ceiling/chajja surfaces including preparation of complete all as specified. |
| 68 | Materials & labour for preparation of newly plastered surface of wall etc and applying two coat of cement base paint, any colour over and including primer/putty to match the existing as required, complete all as specified & directed. |
| 69 | S&F in repair brass spindlle of No 2/3/4 for CP bib taps/angle cock/pillar taps etc complete all as directed. |
| 70 | Materials and labour for 12mm thick black granite slab (width and length as per site requirement) bedded over including 10mm thick rendering in CM 1:4 including making holes and bullnozed moulding on edges and jointed with cement slurry and pointed with white cement with the admixture of pigment to match complete including dismantling of old granite slab.all as specified and directed |
| 71 | Supply and fixing in replacement steel peg set of six, stainless steel fixed with steel screws complete all as specified and directed |
| 72 | S&F in repair 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair complete all as specified and directed. |
| 73 | S&F in repair sink mixture with all the necessary fittings complete all as specified and directed. |
| 74 | Taking down chowkhats or frame exceeding 1.5 Sq. m but not exceeding 4 Sq. m each with shutters without taking off shutters from the frame, complete all as specified and directed |
| 75 | Taking down chowkhats or frame not exceeding 1.5 Sq. m each with shutters without taking off shutters from the frame complete all as specified and directed |
| 76 | Taking down of shutter of any description exc. 1 Sqm & n.exc. 2 Sqm each complete all as specified and directed . |
| 77 | Factory made pressed steel frames, conforming to IS, having profile 125 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, including filling PCC 1:3:6 type etc, complete, as specified, supplied and fixed |
| 78 | Factory made pressed steel frames, conforming to IS, having profile 105 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, including filling PCC 1:3:6 type etc, complete, as specified, supplied and fixed |
| 79 | S&F for flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 30 mm thick, ISI marked, complete all as specified and directed |
| 80 | M&L for gauzed shutter made out of box section with outer and locked frame of size 60mmx35mm (medium grade). The shutter shall be of pressed steel including fixing of 10 mm Square gaurd Bars (06 Nos in Horizontal dire4ctions & 05 Nos in Verical direction complete with fly proof wire mash having 0.46mm nominal dia wire and 1.40mm average width of aperture including two coats of synthetic enamel paint over a coat of red oxide primer including one sliding door bolt , handle and tower bolt complete all as specfied and directed by Engineer in charge. |
| 81 | S&F Aluminium, anodized barrel tower bolts of extruded section and fixed, 200 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified and directed |
| 82 | S&F aluminium anodized handle of size 150 mm, ISI marked, complete all as specified and directed |
| 83 | S&F aluminium alloy, anodised, sliding door bolt 250mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed ISI marked complete all as specified and directed |
| 84 | Material & labour for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 85 | Material & labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed . |
| 86 | S&F Steel windows box type using 'P' section comprising double frame for gauge and glazed skelton shutter jointly with flat iron 40x3mm complete including hinges, handle, tower bolts, stops, lugs etc all as shown on drawing.Note (i) For the perpose of measurement & payment double shutter with frame shall be considered as one unit (ii) Unit rate quoted against this item shall also include the iron mongreries shown on drgs (iii) gaurd bars glazing & Wire mesh shall be measured and paid for separately complete all as specified and directed. |
| 87 | S&F steel ventilators fixed type with glazing bars complete all as specified and directed. |
| 88 | Solid PVC Door frame of size 50mm x 47mm made out of 5mm PVC sheet reinforced suitable for solid PVC door suppling & fixing in opening, complete all as specified. and directed |
| 89 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification complete all as specified and directed. |
| 90 | S&F medium weight mild steel butt hinges 100mm in size complete all as specified and directed. |
| 91 | S&F 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes including hacking out old glass complete all as specified and directed. |
| 92 | S&F 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed. |
| 93 | S&F as in repair Galvanized MS wire cloth 0.46 mm nominal dia of wire and average width of aperture 1.18mm and including fixed with wooden beading for securing wire gauge with wire stappler complete all as specified and directed. |
| 94 | S&F Galvanized MS wire cloth 0.46 mm nominal dia of wire and average width of aperture 1.18mm and including fixed with wooden beading for securing wire gauge with wire stappler complete all as specified and directed. |
| 95 | M&L for Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete all as specified and directed. |
| 96 | S&F in repair mortise lock including necessary arrangements for removal and fixing complete as as specified and directed |
| 97 | Material & Labour for repair to 18/19 mm thick prelaminated particle boards, grade 2 quality, interior grade, commercial type fixed with nails to timber frame work as in cupboard shelves, kitchen, cupboards etc as in repair complete all as specified and directed. |
| 98 | S & F in repair tank lid/ cover made out of with 0.63mm thick PGI sheet, 470mm dia suitable for fixing in water tank capacity 500/1000 ltrs incl 4 sides fastening arrangements with nut and washer having exposed surface sharp edges 08 nos stings by cutting/rivetting of PGI sheets to protect by monkeys menace complete as per sample, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender