Tender For Provn Of Guard Room With Toilet And Allied Services At 604 Eme Bn At Old Cantt, Prayagraj.
Tender Value
22.64 Lakhs
Estimated cost
Bid Submission
16 Jul 2026
7 days left
EMD
45500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Guard Room With Toilet And Allied Services At 604 Eme Bn At Old Cantt, Prayagraj.
BOQ
| Sl. No. | Item Description |
| 1 | Excavating over areas not exc 1.5 m in depth and getting out soft/loose soil complete all as specified and as directed. |
| 2 | M&L for Forming embankments including raising earth, spreading in layers not exc 30cm thick, watering, ramming/ rolling, consolidating with power roller of 8 to 12 tonne and finishing to required size, shape etc., not exc 1.5m high from base, complete all as specified and directed. |
| 3 | Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation, not exc 10 Sqm on plan and not exc 1.5m in depth and getting out soft and loose soil,complete all as specified and directed. |
| 4 | Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm soft/ loose soil complete all as specified and as directed. |
| 5 | Removing excavated soil exceeding 250 m but not exc 500m distance and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified and directed. |
| 6 | M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate, as in foundation filing, sub base of floor complete all as specified and as directed |
| 7 | M & L for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed |
| 8 | M & L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed |
| 9 | M & L for treating the top surface of filled earth as in floor at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed |
| 10 | M & L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed |
| 11 | M & L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed |
| 12 | M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed . |
| 13 | M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and as directed |
| 14 | M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in lintel band/beams at any height complete all as specified and as directed |
| 15 | M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in slabs supported on walls, roof beams etc and the like, complete all as specified and directed. |
| 16 | M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in chajjas, shelves etc and the like, complete all as specified and directed. |
| 17 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed. |
| 18 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions with rough finished surface complete all as specified and as directed |
| 19 | Form work to sides and soffit of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc rough finished complete all as specified and as directed |
| 20 | Form work to soffits of suspended slabs such as roof slab etc. not exc. 200mm thick for fair finished surfaces of concrete complete all as specified and directed. |
| 21 | Form work to chullah hood, chajjas, troughs and similar items including edges complete all as specified and directed. |
| 22 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide complete all as specified and as directed |
| 23 | S&F TMT bars of 10mm dia and over in reinforcement cut to length bent to shape required including cranking bending and binding with mild steel annealed wire not less than 0.90 mm dia or securing with clips and as straight in groves complete all as specified and directed. |
| 24 | M&L for Mild steel bars (TMT bars) 5mm dia and over upto and including 10mm dia in strriups, spaces, ribs and binders complete all as specified and as directed. |
| 25 | M&L for brickwork with fly ash bricks (old size), straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed |
| 26 | M&L for half brick thick wall fly ash bricks (old size), straight or curved on plan to any radius, built in cement mortar 1:4 complete all as specified and as directed |
| 27 | M&L for 5 mm thick rendering in CM 1:3 on ceiling surface plaster complete all as specified and as directed. |
| 28 | M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work finished even and fair without using extra cement complete all as specified and as directed |
| 29 | M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface, finished even and fair complete all as specified and directed. |
| 30 | Preparation of newly plastered surface of ceiling and applying two coats of white wash complete all as specified. |
| 31 | Preparation of newly plaster surface of wall and applying two coats of interior acrylic emulsion ovar a coat of putty for smooth finish and cement base primer complete all as specified and directed. |
| 32 | Material and labour for two coats of water based premium acrylic smooth exterior emulsion of approved coulur with silicon addictive & color stay technology excellent dirt pick up resistance with low VOC less than 50 gram/ltr as per the LEEDS specification anti algal propertiess in two coats @ 1.79 ltrs (undiluted)/10sq mtrs diluted with water as per manufacturer instruction on 1mm thick wall putty and exterior primer, complete all as specified and directed.Mame of Manufacturer : ASIAN/ BERGER/ NEROLAC or equivalent make as mentioned in Appx 'D'.Note- The contractor shall obtain approval of the agency from GE and shall enter a memorandum of understanding (MOU) with the manufacturer duly approved by GE. The execution of work shall be commenced after the submission of MOU and necessary approval from the Engineer-in-charge. MOU shall be valid during currency of work. However during defectlibality period, if any defect is noticed, the contractor shall only be responsible for the rectification of same. |
| 33 | M&L for hardcore of gauge n exc. 63 mm,of broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 34 | M&L for 75 mm thick cement concrete 1:3:6 type C-2 using 20 mm graded stone aggregate in plinth protection finished even and smooth without using extra cement including necessary formwork and cutting of joints complete all as specified. |
| 35 | M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding in cement mortar (1:4) complete all as specified and as directed. |
| 36 | M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in vertical surface, skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar 1:4 Complete all as specified and directed |
| 37 | M & L for non skid joint free coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed. |
| 38 | M&L for glazed ceramic coloured wall tiles in vertical surface 450 X 300 X 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified and directed. |
| 39 | M&L for 10mm thick plaster in CM 1:3, mixed with liquid water proofing compound over concrete surface of roof when concrete is green complete all as specified and directed. (Note : WPC to be mesured and paid separately under proprietate item) |
| 40 | Cleaning the dust,dirt and any other foreign material from roof surface and applying a coat of bituminous primer @ 0.40 ltr / Sqm uniformily and primer shall be allowed to dry over night as conforming to IS 3384-1986 complete all as specified and directed. |
| 41 | M&L for Laying of minimum 3mm thick APP membrane of (reinforced with non-woven fabric polyester type wt not less than 150 gms/sqm) & minimum weighing 3kg/sqm shall be done using butane torch maintaining 100mm side overlap and 150mm end overlap, sealing all overlaps and bonded to the surface by fusing and bonding torchon method complete all as specified and directed. (Note: All water proofing work shall be done as per manufacturer instruction and under supervision of manufacturer technical representative.) |
| 42 | Supply only Liquid water proofing compound (ISI marked) complete all as spesified and directed. |
| 43 | M&L for preparation of new surface of APP membrane and treating/ applying two coat of heat resisting paint complete all as specified and directed. |
| 44 | S&F Factory made single extruded WPC (wood polymer composite) solid door/ window/ Ceosetry windows and other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC Polymer of K value 58-60 (SUspension grade), Calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (max toxicity index of 12 for 100 gms) fabricated with mitre joints after star headed SS Screws having minimum density of 750 Kg/ cum, screw withdrawl strength of 2200 N (face) & 1100 N (edge) minimum comp ressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant fixed in position with MS hold fast/lugs or SS dash fasteners shll be paid for seperately)Note :- For WPC Solid door/ window frames, minus -5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimension on plus side shall be acceptable but no extra payment on this account shall be paid. |
| 45 | S&F factory made extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (suspension Grade),calcium carbonate and natural fibre (wood powder / rice husk/ wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100gms) having minimum density of 650 Kg/cum and screw withdrawl strength of 1800 N (Face) & 900N (Edge), minimum compressive strength 50N/m2, modulus of elasticity 850N/m2 and resistance to spread of flame of class A category with property of being termite / borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-in Charge .Note- Stainless steel butt hinges shall be paid separately. |
| 46 | S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed. |
| 47 | M&L preparation of newly steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 48 | S & F pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified and directed. |
| 49 | M & L for PCC 1:3:6 type C-0 using 12.5mm aggregate crushed stone aggregate as in filling back side of pressed steel door/window frames complete all as specified and directed. |
| 50 | S&F 30mm thick plain WPC factory made glazed Skeleton door shutters (conforming as per IS-4020) with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door to be panelled with SS mosquito mesh and XTN aluminium mesh for additional strength and safety purpose. Door should be fixed with SS hinges and SS screws. Door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as per manufacturers specification & drawings & as directed by Engr-in-charge.Note- Stainless steel wire mesh shall be measured and paid separately. |
| 51 | S&F 30 mm Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size withnecessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 52 | Providing and fixing factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ 0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2 + 0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 53 | Providing and fixing factory made uPVC white colour fixed window made of extruded profiles with wall thickness of 2.3mm(+0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket.1.2 +0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass complete all as specified and directed.(Note: The unit rate quoted by contractor excludes costof glass and includes all other connected accessories Net opening will be measured for payment purpose.) |
| 54 | Providing and fixing factory-made uPVC white colour casement (openable) window suitable for openings up to 1.00 sqm, made from extruded uPVC profiles of wall thickness 2.3 mm (±0.2 mm). The window shall consist of multi-chambered hollow profiles as follows: frame section 60 mm × 58 mm, sash section 60 mm × 73 mm, T-profile section 60 mm × 74 mm (used between two shutters), and glazing bead 35 mm × 20 mm. All members shall be mitre cut and fusion welded at corners. Work includes drilling for hardware, provision for drainage, and fixing of all accessories. EPDM gasket of 1.2 mm (±0.2 mm) thickness shall be provided. Galvanised steel reinforcement shall be inserted as follows: frame 28 mm × 21.5 mm, sash 31 mm × 27.5 mm, and T-profile 27 mm × 17 mm. Frame shall be fixed to wall using 8 mm × 100 mm long anchor fasteners. Hardware shall include casement handles (zinc alloy, white powder-coated), butt hinges (zinc alloy, white powder-coated), and multipoint locking system with transmission gear of mild steel. Window shall accommodate 5 mm thick glass of approved make. |
| 55 | S&F 100 mm long stainless steel butt hinges with steel pin complete all as specified and directed. |
| 56 | S&F for 200mm long stainless steel barrel tower bolt of extruded steel section complete all as specified and directed. |
| 57 | S&F 150mm long stainless steel handles, fabricated type complete all as specified and directed. |
| 58 | S&F 300mm long,stainless steel AL drop door bolt including fixing clips of sheet, cast or exturded section and fixing bolts and 16mm dia bolt of sliding bolts of extruded sections complete all as specified and directed. |
| 59 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with SS wire staples complete all as specified and directed. |
| 60 | S&F mild steel 300 mm ordinary rat tail rod pattern springs including roller & rooler plate complete all as specified and directed. |
| 61 | S&F Floor door stopper of stainless steel body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140mm complete all as specified and directed. |
| 62 | S&F 5.5 mm thick Frosted sheet glass as in, shutters with and including rubber gasket and natural colour anodized 15 micron snap on aluminium beading/glazing, clips etc complete all as specified and directed. |
| 63 | S&F 5.5 mm thick plain sheet glass as in, shutters with and including rubber gasket and natural colour anodized 15 micron snap on aluminium beading/glazing, clips etc complete all as specified and directed. |
| 64 | S&F WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including 'P' or 'S' trap complete all as specified and directed. |
| 65 | S&F for vitreous china wash and basin, white, flat back, size 620 mm x 480 mm x 185mm with pedestal fixed on MS bracket including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, waste fitting, pipe and union complete all as specified and directed. |
| 66 | S & F CP bottle trap (with internal partition 32 mm Size with 300 mm & 190 mm long wall connection pipe and wll flange complete all as specified and directed. Make : Jaquar & Equivalent. |
| 67 | S&F vitreous china Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including 32mm dia CP coupling, CP urinal spreader with CP pipe up to angle cock, waste pipe etc. with all fixing arrangement and pointing around urinal back complete all as specified and directed. |
| 68 | M&L for 500 ltr rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified. |
| 69 | S&F for 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms) complete all as specified and directed. |
| 70 | S&F PP-R pipe 16 mm bore outer dia, PN 16, three-layer construction (Polypropylene Random Copolymer), conforming to IS:15801, UV-stabilized and anti-microbial, fusion welded type, having thermal stability suitable for hot and cold water supply systems, fixed to walls and ceilings or laid in floors including all PP-R plain and brass-threaded polypropylene random fittings, complete all as specified and directed.The pipe shall be fixed with suitable clamps at 1.00 metre spacing, and all joints shall be tested for leak-proofness to the satisfaction of the Engineer-in-Charge. The unit rate quoted shall be deemed to include all necessary fittings, cutting, jointing, fixing, alignment, supports, testing, and making good to the original finish, complete in all respects. |
| 71 | S&F PP-R pipe 20 mm bore outer dia, PN 16, three-layer construction (Polypropylene Random Copolymer), conforming to IS:15801, UV-stabilized and anti-microbial, fusion welded type, having thermal stability suitable for hot and cold water supply systems, fixed to walls and ceilings or laid in floors including all PP-R plain and brass-threaded polypropylene random fittings, complete all as specified and directed.The pipe shall be fixed with suitable clamps at 1.00 metre spacing, and all joints shall be tested for leak-proofness to the satisfaction of the Engineer-in-Charge.The unit rate quoted shall be deemed to include all necessary fittings, cutting, jointing, fixing, alignment, supports, testing, and making good to the original finish, complete in all respects. |
| 72 | S & F for 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed. |
| 73 | S&F for 15mm bore bib taps chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete all as specified and directed. |
| 74 | S&F CP angle stop valve or cock of 15mm bore screwed down for high pressure with crutch or butter fly handle, screwed both end for iron pipes complete all as specified and directed. |
| 75 | S&F in repair central hole basin mixer for WHB cast copper alloy with capstin heads chromimium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed. |
| 76 | S & F PVC connection 15mm bore 60cm long with brass nut at each side complete all as specified and directed. |
| 77 | S & F 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm commercial plywood thick and fixed to wooden plugs with chromium plated brass screws and cups washer complete all as specified and directed. |
| 78 | S & F 600 mm long tubular towel rail , brass chromium plated of 20 mm dia complete all specified and as directed. |
| 79 | S & F 15 mm bore CP fancy stop valve (Concealed type) with long shanks and cup fixed with pipes complete all as specified and directed. |
| 80 | S & F 125 mm size fancy type chromium plated shower rose with swivel joints and connecting rod including fixing to steel pipe or union complete all as specified and directed please. |
| 81 | S&F for PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float & handle, waste pipe & brackets complete set all as specified and directed. |
| 82 | S & F 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints laid in trench or in floor complete all as specified and directed. |
| 83 | S & F 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 84 | S & F 110 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 85 | S & F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 86 | S & F 100 mm outlet dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed. |
| 87 | S & F 110 mm bore PVC (SWR) vent cowl complete all as specified. |
| 88 | Supplying, laying & jointing with appropriate method and testing in trenches DWCPE (SN 8) nominal size 150mm dia (ID)/ 180mm (OD) as per IS-16098 (Part 2): 2013 with and including all items and activities required depth to make sewer line functional including the excavated soil maintained in slope and well ramming and compacted in slope , complete all as specified and directed. |
| 89 | M&L for 1st quality non skid coloured Heavy duty, Matt finish tiles of size 300mmx600mm, 12 mm thick set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including including 15 mm thick screed bed in cement mortar (1:4) AND 25 mm thick levelling corse of pcc 1:2:4 using 12.5 mm crushed stone aggregate complete all as specified and directed. |
| 90 | M&L for point wiring light/fan/bell point controlled by one switch with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed conduit, including non metallic PVC conduit of apropriate size (not less than 20 mm dia) with all accessories, fitting and fixtures, factory made ressessed electrogalvanised steel terminal boxes of reqd size, top cover made of 6 mm thick Phenolic laminated sheet, earthing cable of same discription to common earth drawn in same conduit connected to earth dolly and making good disturbed surfaces and finished to match with existing complete all as specified and directed. |
| 91 | All as per item No 90 above but for One 5 pin 5 amps socket outlet on same board with cables of size 1.5 sqmm |
| 92 | All as per item No 90 above but for One 3/5 pin 5 amps socket outlet on independent board with cables of size 2.5 sqmm |
| 93 | All as per item No 90 above but for One 6 pin 15/16 amps socket outlet on independent board with cables of size 2.5 sqmm |
| 94 | All as per item No 90 above but for One 6 pin 15/16 amps socket outlet on independent board with cables of size 4 sqmm fro geyser |
| 95 | S&F switch piano flush button single pole one way 5 Amp complete all as specified and directed. |
| 96 | S&F socket outlet flush type 3/5 pin 5/6 Amps 230V AC complete all as specified and directed. |
| 97 | S&F switch piano flush single pole one way 15/16 Amps complete all as specified and directed. |
| 98 | S&F socket outlet flush type 5/6 pin 15 Amps 230V AC complete all as specified and directed. |
| 99 | S&F ceiling rose 3 terminal / PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 100 | S&F stepped type electronic fan regulator flush type complete all as specified and directed. |
| 101 | S&F bulb holder complete all as specified and directed |
| 102 | S&F MCB DB SPN 8 way with 200 amps 240 volts rated copper busbar in sheet steel enclosure double door type complete all as specified and directed. |
| 103 | S&F MCB , SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed. |
| 104 | S&F MCB, SPN, AC, 240 volts of 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed. |
| 105 | S&F LED lights fitting 1 x 20W, 220V, AC with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 106 | S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 107 | S&F LED bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 108 | S&F exhaust fan, steel body AC single Phase 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed. |
| 109 | S&F ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) suitable for speed control through electronic regulator complete all as specified and directed. |
| 110 | S&F electric water heater, storage type polycarbonate body with SS inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, PVC connection piece etc. complete all as specified and directed. |
| 111 | S&F desert cooler electric driven (single phase), having nominal air flow capacity of 5000 CuM per hour (or nearest size).(Steel body) complete all as specified and directed. |
| 112 | M&L for earthing complete with galvanished steel earth plate electrode 600x600x6.0 mm thick buried directly in ground and earth pit not less than 2.25 mtr deep below NGL and top edge of the plate not less than 1.5 Mtr deep below NGL, surrounded with adequate qty of char coal dust mixed with salt to a packed thickness not less than 15 Cm on all sides of earth plate incl excavation, earth work, returning filling in , removal of surplus soil to a distance in n.exc. 50 mtr incl GI wire 4mm dia nut bolts etc to earth plate one end connected to continuous earth wire incl GI pipe watering light grade with CI funnel and wire mesh and PCC 1:2:4 type B-1 as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1 duly re-enforced with MS bar 6mm dia @ 150mm C/C both ways with 10mm dia MS bar lifting handles, all as described in electric plate No. 3 of SSR part-I complete all as specified and directed. |
| 113 | Supply, laying in trenches, connecting and testing LT UG cable, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 sqmm x 2 core complete all as specified and directed. |
| 114 | Supply, laying & testing for GI tubing medium grade 25 mm dia complete with all fittings (such as bends, elbows, tees, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, ete.), in trenches, fixed to wallls complete all as specified and as directed. |
| 115 | S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of dia 25 mm complete all as specified and directed. |
| 116 | Drilling and tapping existing CI/DI/GI water mains (in position) for branch connections of any dia complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender