Defence Statutory Bodies & Commissions/Committees Closing in 14 days TDR #56246275

Tender For Repair To Chajja, Parapet, Grouting, Plaster And Related B/R Works To Certain Bldgs Under Age /B-Iv Of Ge (South) Meerut Cantt

Issued by Statutory Bodies & Commissions/Committees · Meerut, Uttar Pradesh
Tender Value
48 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
14 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Repair To Chajja, Parapet, Grouting, Plaster And Related B/R Works To Certain Bldgs Under Age /B-Iv Of Ge (South) Meerut Cantt

BOQ

Name of Work:- REPAIR TO CHAJJA, PARAPET, GROUTING, PLASTER AND RELATED B/R WORKS TO CERTAIN BLDGS UNDER AGE /B-IV OF GE (SOUTH) MEERUT CANTT
Sl. No. Item Description
1M&L for repair to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered above 3.5m and upto 7m from FFL of Ground Floor.) (Note : Necessary Forwork and reiforcement required at the site will be supplied and fixed by the contractor and the cost of these are deemed to be included in the rates quoted by the contractor and contractor have to inform the department one day in advance after binding the reinforcement otherwise no payment will be considered on this account)
2M&L for repairing existing RCC structure work by grouting, gunting to damaged edge bottom of beam , chajja, slab 40 to 60mm thick and part of RCC member in CM 1:3 & depositing material/ mortar with spray gun under a pressure of 20 to 30 N/CM2 including scaffolding and welding wire mess 2 mm dia and size of wiremesh 50mm X 50 mm including cutting welding and placing position as directed by Engr in-charge.complete all as specified and directed.
3M&L for Rendering 15 mm thick rendering on roof surface including flashings and junction of parapets etc, finished even and smooth in cement mortar (1:4), including water proofing compound 200 ML per each cement bag (50 Kg) after brushing cement slurry including Taking down cement plaster on top of roof slabs, RCC chajja, and projection etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.
4Material and labour for 12 mm thick rendering in Cement mortar 1:6 on brick or concrete surfaces finished even and smooth complete all as specified including Taking down cement plaster on top of roof slabs, RCC chajja, and projection etc including raking out joints, hacking for key scrubbing down with water etc
5M&L for rendering 10 mm thick on brick or concrete surfaces, finished even and smooth on ceiling/chajja in cement mortar (1:4), complete all as specified including Taking down cement plaster on top of roof slabs, RCC chajja, and projection etc including raking out joints, hacking for key scrubbing down with water etc
6M&L for Two coats of cement base paint over a coat of primer white or tinted on new plastered surfaces of walls and applying 1mm thick wall care putty on wall including prepration of surfaces and washing floors, cleaning glass, joinery,electrical fittings, wiring etc. of drops and splashes complete all as specified and directed.(Note- cement base paint shall be applied through roller and through applicator)
7M&L for preparation of newly plastered surface of wall etc and applying 1mm thick wall care putty and two coat of oil bound distemper (OBD) over one coat of primer complete all as specified. (Note- The Oil bound distemper shall be applied through roller and through applicator)
8M&L for preparation of newly plastered surface of ceiling etc and applying 1mm thick wall care putty and two coat of white wash) over one coat of primer complete all as specified. (Note- white wash shall be applied through roller and through applicator)
9M&L for complete removal of exisitng treatment on old internal wall surfaces by sanding machine or any other mechanical means thereafter rubbing down the surface, in order to remove dust, dirt, loose particles etc and applying 1 mm thick wall care putty on all surfaces and then applying two coat of oil bound distemper. Complete all as specified and manufactures instruction and directed by Engr-in-charge. (Note- The Oil bound distemper shall be applied through roller and through applicator)
10M&L for Preparation of existing walls and applying one coat of oil bound distemper incl repair work like putty, plaster and preparation of required area with primer or extra coat of OBD to merge with existing area of OBD as per requrement on walls including Washing, rubbing down and stopping of distempered, painted surfaces on walls all as specified (Note- The Oil bound distemper shall be applied through roller and through applicator)
11M&L for preparation of plastered or un-plastered old surfaces of wall and applying one coats of white wash incl repair work like putty, plaster and preparation of required area complete all as specified & directed. (Note- white wash shall be applied through roller and through applicator)
12M&L for preparation of plastered or un-plastered old surfaces of ceiling and applying one coats of white wash incl repair work like putty, plaster and preparation of required area complete all as specified & directed. (Note- white wash shall be applied through roller and through applicator)
13Material & Labour for Washing, rubbing down the wall surfaces and applying one coat of cement base paint incl repair work like putty, plaster and preparation of required area with primer or extra coat of cement base paint to merge with existing area of cement base paint as per requrement on walls complete all as specified and directed. (Note- Cement base paint shall be applied through roller and through applicator)
14Material & Labour for Washing, rubbing down the wall surfaces and applying two coat of cement base paint incl repair work like putty, plaster and preparation of required area with primer or extra coat of cement base paint to merge with existing area of cement base paint as per requrement on walls complete all as specified and directed. (Note- Cement base paint shall be applied through roller and through applicator)
15Material & Labour for Washing, rubbing down the wall surfaces and applying one coat of Apex weather proof incl repair work like putty, plaster and preparation of required area with primer or extra coat of cement base paint to merge with existing area of cement base paint as per requrement on walls complete all as specified and directed. (Note- The Apex shall be applied through roller and through applicator)
16M&L for Two coats of Apex weather proof over a coat of primer white or tinted on new plastered surfaces of walls and applying 1mm thick wall care putty on wall including prepration of surfaces and washing floors, cleaning glass, joinery,electrical fittings, wiring etc. of drops and splashes complete all as specified .
17M&L for preparation old wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.
18M&L for preparation of old or previously untreated steel surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified & directed.
19M & L for cutting of bushes small trees (Peepal small plants etc) trunks shrubs of any dia and girth from roof projection, chajjas , wall junction parapet etc at any height by necessary demoliton of brick work etc if requried and making good distrubed surfaces to match with existing finishes with and incl material and labour rendering in CM 1:4 mixed with and including water proofing compound @ 200 ml per 50 kg of cement consumed /PCC 1:3:6 type B0 ( using 12.50 mm graded stone aggregate) /Brickwork work in CM 1:4 as required at site and as directed by Engr-in-Charge
20S & F in repair tank lid/ cover made out of with 0.63mm thick PGI sheet, 470mm dia suitable for fixing in water tank capacity 500/1000 ltrs incl 4 sides fastening arrangements with nut and washer having exposed surface sharp edges 08 nos stings by cutting/rivetting of PGI sheets to protect by monkeys menace complete as per sample, complete all as specified and directed.
21M&L for Cleaning water tanks 500 ltrs and date of cleaning write down on the tank ( in white paint ) including the removing and refixing the tank and fitted with new union as required and repair work to stop leakage of water or damages occured during removing or refixing the tanks complete as directed by Engr-in-charge.
22M&L for Cleaning water tanks 1000 ltrs and date of cleaning write down on the tank ( in white paint ) including the removing and refixing the tank and fitted with new union as required and repair work to stop leakage of water or damages occured during removing or refixing the tanks complete as directed by Engr-in-charge.
23Supply & fix in repair PVC ball valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe 20mm bore complete all as specified & directed.
24Supply & fix in repair PVC ball valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe 25mm bore complete all as specified & directed.
25Supply, fix 20 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing and including taking up or down complete all as specified & directed.
26Supplying and laying of CPVC pipes 20mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors,including all fitttings and including taking up or down complete all as specified. complete all as specified and directed
27Taking up or down steel tubing & connections, including cleaning & Refixing old steel tubing & connections in new or old position (Walls, ceiling, floors, etc.) of 15mm bore complete all as spd and directed
28Taking up or down steel tubing & connections, including cleaning & Refixing old steel tubing & connections in new or old position (Walls, ceiling, floors, etc.) of 20mm bore complete all as specified and directed
29S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.
30S & F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed
31S & F 110mm bore PVC (SWR) bends With acces door any radius.complete all as specified and directed
32S & F 75mm bore PVC (SWR) bends with access door any radius.complete all as specified and directed
33S & F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal.complete all as specified and directed
34S & F 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal.complete all as specified and directed
35S&F 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes all as specified and directed
36S&F as in Figured glass, 3 mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane, complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56246275
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 48 Lakhs
LAST DATE 22-07-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair To Chajja, Parapet, Grouting, Plaster And Related B/R Works To Certain Bldgs Under Age /B-Iv Of Ge (South) Meerut Cantt
Basic Detail
Tender No 95515/S/E8
Bidding Type Tender
Location
City Meerut
State Uttar Pradesh
Key Dates
Publish Date 01 Jul 2026
Submission Date 22 Jul 2026
Open Date 24 Jul 2026
Finance
Tender Value 48 Lakhs
Tender Fee 500
EMD 96000
Exemption Not Available
Document List
3bef02cc-5962-4538-a96a-bb5b0fefd299.html
BOQ_868626.xls
Tender95515.pdf
Tendernotice_1 (1).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 01, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 22, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 14 days
Jul 24, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 16 days

Tender Documents

Download All (ZIP) ↓
html

3bef02cc-5962-4538-a96a-bb5b0fefd299.html

xls

BOQ_868626.xls

pdf

Tender95515.pdf

pdf

Tendernotice_1 (1).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders