Tender For Repair/Replacement Of Aluminium Door/Window,Joinery,Flase Ceiling , Steel Window/Gate And Other Allied Works In Domestic Area And All Md Accn At Af Stn Singarsi Under Age(I) Af Stn Singarsi
Tender Value
9 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
18 days left
EMD
18000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pakur → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Aluminium Door/Window,Joinery,Flase Ceiling , Steel Window/Gate And Other Allied Works In Domestic Area And All Md Accn At Af Stn Singarsi Under Age(I) Af Stn Singarsi
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters n.exc 1.50Sqm (without taking off shutters from the frames),complete all as specified and as directed. |
| 2 | All as per serial item No. 1.00 above but here in before exc 1.50 Sqm and n.exc 4.00 Sqm each complete all as specified and as directed. |
| 3 | S&F steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded,complete all as specified and as directed. |
| 4 | All as per item No 3.00 but here in before without glazing bars complete all as specified and as directed. |
| 5 | M&L for steel ventilator with top hung shutter including hinges steel peg stay,complete all as specified and as directed. |
| 6 | Supply and fabrication of Mild steel guard bars and welded to window frames,complete all as specified and as directed. |
| 7 | M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat red oxide primer,complete all as specified and as directed. |
| 8 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified and as directed. |
| 9 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws complete all as specified and as directed. |
| 10 | M&L for double action floor spring hydraulically regulated made up of min 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made up of brass, other parts made of mild steel heavy duty and fixed,complete all as specified and as directed. |
| 11 | S&F Door closer hydraulically regulated, alluminium body designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed,complete all as specified and as directed. |
| 12 | S&F Floor door stopper 150mm over all cover plate lenght of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor,complete all as specified and as directed. |
| 13 | S&F Aluminium mortice lock, vertical type suitable for aluminium door of size 100 mm,4 Levers complete all as specified and as directed. |
| 14 | S&F Aluminium mortice lock, vertical type suitable for aluminium door of size 75 mm,4 Levers complete all as specified and as directed. |
| 15 | S&F 4.8 mm thick plain glass of selected quality and securing in metal / aluminium frame, complete all as specified and as directed. |
| 16 | S&F in repair for 4.00 mm thick plain glass ordinary quality & glazing with oil and putty in square n. exc 0.5 sqm in each pane, complete all as specified and as directed. |
| 17 | S&F in repair for 3.00 mm thick plain glass ordinary quality & glazing with oil and putty in square n. exc 0.5 sqm in each pane, complete all as specified and as directed. |
| 18 | S&F 12.00 mm Prelaminated boards interior grade with both side laminated complete all as specified and directed by Engineer-in-Charge. |
| 19 | S&F in repair stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and as directed. |
| 20 | Taking down cement plaster of any description on brick or stone walls, Chajjas etc., including raking out joints, hacking for key, scrubbing down with water etc., ncl removing rubbing to a distance exceeding 100.00 m, complete all as specified and as directed. |
| 21 | Material & Labour for 15mm thick rendering in Cement Mortar 1:6 on brick work or concrete surfaces, finished even and smooth without using any extra cement, complete all as specified and as directed. |
| 22 | Material & Labour for two coats of oil bound distamper over a coat of primer on new plastered surfaces including preparation of surface,complete all as specified and as directed. |
| 23 | M&L 1-2mm thick wall care putty on wall omplete all as specified and as directed |
| 24 | Demolition of brick work built in cement mortar including all quoins, arches, pillar including coping etc,complete all as specified and as directed. |
| 25 | M & L for brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed. |
| 26 | Dismantling of wall and ceiling boards( fibre pulp insulation etc) any thickness including cover fillets,complete all as specified and as directed. |
| 27 | M&L for 7 to 9 mm thick pre-painted gupsum building board size 595 x 595 mm PVC laminated at back side of board insulations and acoustic purpose flat in ceiling fixed. Note (The rate inclusive of scaffolding and necessary arrangements)complete all as specified and as directed. |
| 28 | S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified . NOTE: (The rate inclusive of scaffolding and necessary arrangements),complete all as specified and as directed. |
| 29 | S&F of prepainted anodised Aluminium snap grid frame work for flase celling complete all as specified and as directed. |
| 30 | M&L for preparation of newely plastered wall surfaces and applying two coats of Oil bound distemper over a coat of alkali resistant primer over 1mm wall care putty complete all as specified and as directed. |
| 31 | M & L for Complete removal of existing treatment of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with , filling cracks with birla white putty and brooming to remove all dirt etc and applying two coats of distemper over one coat of alkali resistant primer over 1mm wall care putty complete all as specified and as directed. |
| 32 | Taking down shutter of any description exc 1.0 sqm but n. exc 2.0 sqm each and refixing in same position including resecuring or easing and adjusting,complete all specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender