Tender For Repair/Maint Of Certain B/R & E/M Works At Sag Pakur And Technical Area Under Age (I) Af Singarsi.
Tender Value
9.50 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
18 days left
EMD
19000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pakur → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maint Of Certain B/R & E/M Works At Sag Pakur And Technical Area Under Age (I) Af Singarsi.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully unserviceable copper / aluminium point wiring (light, fan, bell socket or power) including all fittings such as switches, socket, ceiling roses , regulators and fittings complete and making good the disturbed surfaces complete all as specified and as directed. |
| 2 | M&L for point wiring for one light/fan/bell with single core PVC insulated and unsheathed stranded FRLS copper conductor cable 1100 volts grade size 1.5 Sqmm (nominal area) in and including PVC conduit & PVC casing capping 20/25/32/40 mm width with one single core PVC insulated unsheathed 1.5 Sqmm (nominal area) stranded FRLS copper conductor as earth continuity wire and connected to earth dolly including PVC switch board on existing wall surface for one light/fan point /bell point controlled by one number one way switch & making good the disturbed surface to match with existing surface/wall complete all as specified and as directed. Note: - (i) Rate quoted shall include provision of blank plates as per site requirement (No extra payment will be made for the same) |
| 3 | All as per Item No 2 here-in-before but for one 5 pin socket outlet 5 Amps on independent board with 1.5 Sqmm complete all as specified and as directed. |
| 4 | All as per Item No 2 here-in-before but One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 sq. mm size complete all as specified and as directed. |
| 5 | All as per Item No. 2 here-in-before but for one 5 pin socket outlet 15 Amps on independent board with 4 Sqmm copper cable FRLS & 4 Sqmm FRLS copper cable for earth continuity wire complete all as specified and as directed. |
| 6 | S&F for switch piano flush type 6 Amp single pole one way complete all as specified and as directed. |
| 7 | S&F for socket flush type 6 Amp 5 Pin complete complete all as specified and as directed. |
| 8 | S&F for switch socket combination 5 Pin 6 Amp universal complete all as specified and as directed. |
| 9 | S&F for switch socket combination 5 Pin, 6/15 Amp universal complete all as specified and as directed. |
| 10 | S & F ceiling rose, 3 phase/PVC/Polycarbonate, isolated body complete all as specified and as directed. |
| 11 | S & F call bell, ding dong AC 230 volts, single pole complete all as specified and as directed. |
| 12 | S & F bell push, flush type, 5 amp complete all as specified and and directed. |
| 13 | S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed. |
| 14 | S&F sub main wiring with 2 run of 4.0 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable FRLS working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including heavy duty rigid non-metallic PVC conduit & casing/caping (20/25/32/40 mm width) including size 4.0 sqmm (nominal cross sectional area) PVC insulated un-sheathed single core multi stranded copper conductor cable as earth continuity conductor connected to main switches/DB\\"S or common earth dully complete all as specified and directed after taking down old sub main wiring complete and making good the disturbed surface complete all as specified and as directed. ( NOTE :- Two runs of 4.0 Sqmm pvc wire, one run of 4.0 Sqmm pvc wire and one run of pvc casing caping/ PVC conduit will be measured as one unit |
| 15 | S&F sub main wiring with 2 run of 6.0 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable FRLS working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including heavy duty rigid non-metallic PVC conduit & casing/caping (20/25/32/40 mm width) including size 6.0 sqmm (nominal cross sectional area) PVC insulated un-sheathed single core multi stranded copper conductor cable as earth continuity conductor connected to main switches/DB\\"S or common earth dully complete all as specified and directed after taking down old sub main wiring complete and making good the disturbed surface complete all as specified and as directed. ( NOTE :- Two runs of 6.0 Sqmm pvc wire, one run of 6.0 Sqmm pvc wire and one run of pvc casing caping/ PVC conduit will be measured as one unit |
| 16 | S&F sheet metal enclosures for DB’s double door suitable for mounting of MCB’s/Isolators, 240 Volt, SPN, 4 way with built in bus bar complete after taking down old unserviceable DB's and including making good the distrubed surface and matching with existing colour complete all as specified and as directed. |
| 17 | S&F sheet metal enclosures for DB’s double door suitable for mounting of MCB’s/Isolators, 240 Volt, SPN, 8 way with built in bus bar complete after taking down old unserviceable DB's and including making good the distrubed surface and matching with existing colour complete all as specified and as directed. |
| 18 | S&F VTPN distribution board with provision of MCCB as incommer, double door suitable for mounting MCB's/Isolators, 415 Volt,4 way with built in 160A rated bus bar and with out MCCB complete after taking down old unserviceable DB's and including making good the distrubed surface and matching with existing colour complete all as specified and as directed. |
| 19 | S & F MCCB, 4P, 415V, overload adjustable 0.63 - 0.8-1 x in short circuit fixed 63 Amps breaking capacity 16KA complete all as specified and as directed. |
| 20 | S & F MCB TPN 415 V 40 to 100 A and 'C' curve series of breaking capacity 10 kA ISI marked, complete all as specified and as directed. |
| 21 | S & F MCB, SP, 240V, 40 Amps and ' B ' series breaking capacity 10 KA ISI marked complete, all as specified and as directed. |
| 22 | S & F MCB, SP, 240V, 6 to 32 Amps and ' C ' series breaking capacity 10 KA ISI marked complete, all as specified and as directed. |
| 23 | S & F MCB, SPN, 240 V, 40 to 63A Amps, and ‘C’ series breaking capacity 10 KA complete ISI marked , complete all as specified and as directed. |
| 24 | Supply and fix ceiling fan regulator electronic Step type, solid state, 120W, 2 module, 240 volts, complete all as specified and as directed. |
| 25 | S&F metal clad box enclosure with socket plugtop and MCB SP 20 Amp flush of 240v mounting enclosure with 2 pin earth plug socket complete all as specified and as directed. |
| 26 | S&F in repair for wall mounted LED 4 feet 20 Watt fittings with high diffuser , driver holder extruded aluminium heat sink provided for energy efficient heat dissipation &integrated electronic incl all accessories and lamp ,internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. |
| 27 | S&F in repair for wall mounted LED 2 feet 10 Watt fittings with high diffuser , driver holder extruded aluminium heat sink provided for energy efficient heat dissipation &integrated electronic incl all accessories and lamp ,internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. |
| 28 | Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 29 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 30 | Dismantling complete ceiling fan (of size 1200/1400/1500 mm sweep-single phase IM based) alongwith down rod, canopies, shackle, condenser housing with its rubber bushes, split pins, unscrewing the body parts of ceiling fan, taking out stator, motor winding, ball bearings, gun metal bush, etc. complete to carry out the following repairs :- (a) Removing of burnt out fan winding and re-winding of motor with suitable size of copper enamelled wire, varnishing, heating as per manufractures design and directed and re-assembling (b) New spare parts (i.e) rubber bush of shackle and condenser housing, gun metal bushes, ball bearing, shaft, twin twisted copper cable shall be measured and paid separately under relevant item. |
| 31 | Supply and fixing ceiling fan shackle kit complete with fan rod nut-bolts, hook nut-bolts in rubber bushing and lock pin suitable for ceiling fan 1200/1400 mm sweep complete all as specified and as directed. |
| 32 | Supply and fixing bearing number of complete all as specified and as directed. 6201/6202/6203/6204 as required, Make : SKF/NBC or Equivalent make as specified. |
| 33 | Supply and fixing condenser 2.5 Mfd complete all as specified and as directed. |
| 34 | Supply and fixing condenser 3.15 Mfd complete all as specified and as directed. |
| 35 | Supply and fixing PVC holder for condenser housing complete all as specified and as directed. |
| 36 | Supply and fixing twin core twisted copper flexible wire/cable of size 0.5 sqmm, single core complete all as specified and as directed. |
| 37 | Supply and fixing only gun metal bush complete all as specified and as directed. |
| 38 | Supply and Fix MS ceiling fan shaft suitable for 1200/1400/1500 mm sweep fans, complete all as specified and as directed. |
| 39 | Taking down ceiling fan/exhaust fan and complete painting of ceiling fan by scraping with brush / removing old spray paint with the help of paint remover chemical and spray painting with two coat of synthetic enamelled paint with super glossy finish (grey/brown/white) with the help of spray painting machine and writing Ceiling fan Nos with paint and refixing the same complete all as specified and as directed. |
| 40 | Dismantling complete exhaust fan of size 350/400/450 mm sweep or pedestal fan with condenser housing unscrewing the body parts of ehaust fan, taking out stator, motor winding, ball bearing, gun metal bush etc. complete to carry out the following repairs :- (a) Removing of burnt out fan winding and re-winding of motor with suitable size of copper enamelled wire, varnishing, heating as per manufractures design and directed and re-assembling (b)New spare parts (i.e) condenser housing, gun metal bushes, ball bearing, shaft twin twisted copper cable shall be measured and paid separately under relevant item. |
| 41 | Supply and Fix exhaust fan shaft suitable for 300/380/450 mm sweep fans or shaft suitable for pedestal fan , complete all as specified and as directed. |
| 42 | Supply and fixing flapper shutter, louvers of exhaust fan 300/380/450 mm sizes made out of powder coated metal body of appropriate thickness. Fixing of exhaust fan louvers should be done with the help of anchor, fastener, nut bolts. Complete all as specified and as directed. |
| 43 | Supply and fix exhaust fan motor AC single Phase, 230V for size 300 mm, upto 50 W sweep exhaust complete all as specified and as directed. |
| 44 | Supply and fixing exhaust fan frame with holding legs complete incl. suitable nuts/bolts for exhaust fan of 300/380/450 mm sweep as per existing make/sizecomplete all as specified and as directed. |
| 45 | Supply & fixing blade made of iron suitable for Exhaust fan 300 mm sweep complete all as specified and as directed. |
| 46 | Dismantling/Disconnecing of electric and water connection of the geyser, taking down from its position on ground, dismantling geyser complete viz removing tank from its outer body, geyser assembly plate from the tank, descaling geyser inner tank and apparatus plate using descaling chemical complete, electrically testing its thermostate & heating element and testing tank for leakage, reassembling the geyser, replacement of unserviceable parts such as heating element, thermostate, indication lamp, plug top, three core cable, rubber gasket, inner tank, split plate, outer bottom cover, apparatus plate if required (Spares will be paid under relevant item of the Schedule), testing the geyser and installation of the geyser into its original position and connecting all electric and water supply connection complete, all as specified and as directed by Engineer-in-Charge of capacity 25/50 litres. |
| 47 | Supply & fix indication lamp (green / red) as requiredcomplete all as specified and as directed. |
| 48 | Supply and replacement thermostat for geyser as per site requirement temp setting on 60 degree Centigrade ISI Mark complete all as specified and as directed. |
| 49 | Supply and replacement heating element any type as per site requirement of capacity 2 KW ISI Mark complete all as specified and directed. |
| 50 | Supply& fix inner Stainless Steel tank 304 grade of cap 25 ltr all complete all as specified |
| 51 | Supply and replacement Apparatus plate 06/09 hole for 25/50 litres capacity geyser made out of brass and chromium plated as per site requirement complete all as directed. |
| 52 | Supply and replace glass wool for 25/50 ltrs capacity geyser complete all as specified and directed. |
| 53 | Supply and replacement Auto-cut Switch for geyser as per site requirement ISI Mark complete all as specified and directed. |
| 54 | S&F 3 core PVC insulated, PVC round cable of size 4 sqmm with stranded copper conductor complete all as specified and directed. |
| 55 | Supply & Fixing PRCD plugtop 16 A, 30 mA, 230 V, 50 Hz AC conforming to IEC:61540, equipped with an auto trip feature which shuts off if detects any current leakage complete all as specified and directed. |
| 56 | Supply& fix PCB universal type suitable for 25 / 35 Ltr Geyser complete all as specified and as directed. |
| 57 | S&F for PVC flexible pipes 15mm dia (heavy duty) both end socketed of size not less than 450mm long for cold water complete all as specified and as directed. |
| 58 | S&F hot water pipe for geyser of size not less than 450 mm, connection with check nuts and washers complete all as specified and as directed. |
| 59 | S&F in replacement of gun metal non return valve of 15mm dia, 0.8 Mpa ISI marked complete all as specified and as directed. |
| 60 | S & F 15 mm Chromium plated, fancy type, Stop valves, cast copper alloy screwed down, high presure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 61 | S & F 15mm chromium plated bib taps, fancy type, cast copper alloyed with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 62 | S&F fastner geyser hanging hook with nuts and bolts complete to hang properly and bear the water filled geyser weight complete all as specified and as directed. |
| 63 | S & F in repair GI Street Light Pipe with 105-135 deg bend, 32-40 mm diameter and length not less than 01 meter incl. fixing accessories such as saddles, holderbats, clamps, nut-bolts, etc. & one coat of primer, two coat of Aluminium paint complete, all as specified and as directed. |
| 64 | Supply & Fixing in repair of LED street light fitting 35 W, 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, surge protection, complete all as specified and as directed. |
| 65 | Supply, Installation, Testing & Commissioning of indoor type LT Panel 415 V, 3-ph, 50 Hz capacity, CPRI approved, made out of CRCA sheet 2.0 mm thick, verminproof, Floor Mounted, totally enclosed with front & rear opening, weather and waterproof having required number of copper busbars of capacity 250 A for R,Y,B and Neutral with heat proof colour code and mounted on insulators, stickering of switchgears, danger notice plate, including connecting incoming and outgoing cables with necessary PCC 1:3:6 foundation on floor comprising the following:-Incoming(a) On Load Changeover Switch (4-Pole, 125 A) I-O-II -01 Nos. Make: Havells Euroload IHCNFO0125 or equivalent as specified(b) MCCB 4P, 415 VAC, 250 A with rupturing capacity of 36 kA-01 No.(c) LED Indicating lamps - 03 Nos. Make: C&S/Neptune/L&T/Vaisnavo(d) Digital Three Phase VIF Meter with VLN, VLL, I1, I2, I3, F measurement -01 No. Make: L&T, Schneider, C&S electric(e) CT 200/05, 5VA, CL-1.0-01 Set (03-ph)Outgoing(a) MCCB 4P, 415 VAC, 100 A with rupturing capacity of 16 kA-02 Nos.(b) MCB TPN, 415 VAC, 32 A with rupturing capacity of 10 kA-01 No.(Note: Cost includes necessary control/power wiring connections, MCBs, lugs/ other accessories necessary for LT Panel. Further, copper busbars for phases are included in the quoted price) |
| 66 | S & F busbar chamber with copper strip of capacity 100 A suitable for 3-ph, 415 VAC supply with 4 No. busbars for each phase i.e. R, Y, B & N in sheet metal enclosure of size 15\\"x12\\"x4\\", weatherproof, waterproof & verminproff with hinged front opening complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 67 | S & F busbar chamber with copper strip of capacity 100 A suitable for 3-ph, 415 VAC supply with 4 No. busbars for each phase i.e. R, Y, B & N in sheet metal enclosure of size 15\\"x12\\"x4\\", weatherproof, waterproof & verminproff with hinged front opening complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender