Tender For Repair And Maintenance To Internal Electrification System , Dbs, Mccbs And Other Connected Works At Cg Complex, Doraha,Baddowal And Moga Under Ge Ludhiana
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Jul 2026
10 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Firozepur → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance To Internal Electrification System , Dbs, Mccbs And Other Connected Works At Cg Complex, Doraha,Baddowal And Moga Under Ge Ludhiana
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully exising unserviceable aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor etc. complete all as specified and as directed. |
| 2 | Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed. |
| 3 | Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes all as specified. |
| 4 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit including all accessories after cutting chases in wall/ceiling etc, heavy duty ISI marked, with GI Modular sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for One light point controlled by one, one way switch 5 Amps |
| 5 | ditto all as per item No 4 above but for One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 6 | ditto all as per item No 4 above but for One bell point controlled by one, bell switch 5 Amps |
| 7 | ditto all as per item No 4 above but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 8 | ditto all as per item No 4 above but for One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 9 | ditto all as per item No 4 above but for but with stranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLSH cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly. |
| 10 | ditto All as per item No 4 above but with stranded copper conductor 4 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLSH cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multistranded copper conductor 4 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly. |
| 11 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with GI sunken /surface boxes 1.2 mm thick, 60 mm deep with earth dolly duly as per site requirment , covered with modular white cover plate with frame suitable for modular switches, or PVC surface mounted modular box, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One light point controlled by one, one way switch 5 Amps |
| 12 | ditto all as per item No 11 above but for One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 13 | ditto all as per item No 11 above but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board. |
| 14 | ditto all as per item No 11 above but for One bell point controlled by one, bell switch 5 Amps |
| 15 | ditto all as per item No 11 above but for One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 16 | ditto all as per item No 11 above but for using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 17 | ditto all as per item No 11 above but for with stranded copper conductor 4 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLSH cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multistranded copper conductor 4 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly. |
| 18 | S & F in replacement of Modular switch one way 6 Amps, 1 module complete all as specified. |
| 19 | S & F in replacement of Modular switch one way 16 Amps, 1 module, with neon indicator complete all as specified. |
| 20 | S & F in replacement of celling rose 2/3 terminals, PVC/ polycarbonate, isolated body ISI marked complete all as specified. |
| 21 | S & F in replacement of modular step type fan regulator 120 watt two module suitable for operation on 230 volt 50 HZ AC supply complete all as specified and as directed |
| 22 | S & F in replacement of Modular socket, 6 Amps, 2/3 pin combination 2 module complete all as specified. |
| 23 | S & F in replacement of Modular socket, 6/16Amps, 2/3 pin combination 2 module complete all as specified. |
| 24 | S & F in replacement of modular Bell push modular 6 Amps single module complete all as specified. |
| 25 | Suply and fix in replacement of Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply including removal of old unserviceable one complete all as specified and as directed |
| 26 | S & F in replacement of lamp holder, PVC body of brass suitable for batten fitting completes all as specified. |
| 27 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit including all accessories etc, heavy duty ISI marked, with mild steel sunken boxes 1.6 mm thick, 60 mm deep with earth dolly duly, covered with hylem sheet cover 3 mm thick, ISI marked suitable for fixing of switches, fan regulators and sockets including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One light point controlled by one, one way switch 5 Amps |
| 28 | ditto all as per item No 27 above but for One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 29 | ditto all as per item No 27 above but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board. |
| 30 | ditto all as per item No 27 above but for One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 31 | ditto all as per item No 27 above but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 32 | ditto all as per item No 27 above but with stranded copper conductor 4 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLSH cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multistranded copper conductor 4 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly. |
| 33 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with mild steel sunken boxes 1.6 mm thick, 60 mm deep with earth dolly duly, covered with hylem sheet cover 3 mm thick, ISI marked suitable for fixing of switches, fan regulators and sockets including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for One light point controlled by one, one way switch 5 Amps |
| 34 | ditto all as per item No 33 above but for One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator |
| 35 | ditto all as per item No 33 above but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board. |
| 36 | ditto all as per item No 33 above but for One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 37 | ditto all as per item No 33 above but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 38 | S & F in replacement of Switch piano flush type, single pole, one way, 5/6 Amp complete all as specified. |
| 39 | S & F in replacement of Switch piano flush type, single pole, one way, and 15/16 Amp complete all as specified. |
| 40 | S & F in replacement of Switch piano flush type, single pole, two way, and 5/6 Amp single module complete all as specified. |
| 41 | S & F in replacement of Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, piano flush type complete all as specified. |
| 42 | S & F in replacement of Switch Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, piano flush type complete all as specified. |
| 43 | S & F in replacement of replacemnt step type fan regulator 120 watt suitable for 230 volt 50 Hz AC supply complete all as specified and as directed. |
| 44 | S & F in replacement of Bell push 6 Amps single complete all as specified. |
| 45 | S & F in replacement of Ceiling rose, surface Bakelite suitable ISI marked for batten fitting complete all as specified |
| 46 | S & F in replacement of Switch piano flush type, single pole, one way, and 6 Amp complete all as specified. |
| 47 | S & F in replacement of Socket outlet multipurpose having provision for 3 pin, 6 Amp and 2 pin, 6 Amp, piano flush type complete all as specified. |
| 48 | S & F in replacement of TPN phase segregated distribution board double door vertical type 6 way 415 volts, 50Hz suitable for MCCB incommer IP 43 protection on wall/ floor with necessary cement work and electrical connections complete all as specified. Make: L&T, Legrand, C & S, Schneider, ABB,Goldmedal. |
| 49 | S & F in replacement of TPN phase segregated distribution board double door vertical type 4 way 415 volts, 50Hz suitable for MCCB incommer IP 43 protection on wall/ floor with necessary cement work and electrical connections complete all as specified. Make: L&T, Legrand, C & S, Schneider, ABB,Goldmedal. |
| 50 | S & F in replacement of sheet metal enclosureVertical TPN DB suitable for MCCB Incomer 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. Make: L&T, Legrand, C & S, Schneider, ABB,Goldmedal. |
| 51 | S & F for sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. Make: L&T, Legrand, C & S, Schneider, ABB,Goldmedal. |
| 52 | S & F in replacement of sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.Make: L&T, Legrand, C & S, Schneider, ABB,Goldmedal |
| 53 | S & F in replacement of sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.Make: L&T, Legrand, C & S, Schneider, ABB/Goldmedal |
| 54 | S & F for sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. Make - L&T/ Schindier/Legrand/ABB/Goldmedal. |
| 55 | S & F MCCB TPN 4 pole 415 volts 16 KA suitable for fixing on DB of capacity of current rating 100 Amps with adjustable thermal and microprocesser release with extended terminals complete all as specified. Make L&T, Legrand, C & S, Schneider, ABB,Goldmedal |
| 56 | S & F MCCB TPN 4 pole 415 volts 16 KA suitable for fixing on DB of capacity of current rating 63 Amps with adjustable thermal and microprocesser release with extended terminals complete all as specified. Make L&T, Legrand, C & S, Schneider, ABB,Goldmedal |
| 57 | S & F MCCB TPN 4 pole 415 volts 16 KA suitable for fixing on DB of capacity of current rating 40 Amps with adjustable thermal and microprocesser release with extended terminals complete all as specified. Make L&T, Legrand, C & S, Schneider, ABB, Goldmedal |
| 58 | S & F for MCB tripple pole and neutral rated capacity 63 A, 415V breaking capacity 10 KA complete all as specified and as directed. Make - Schindier/Legrand/L&T/ABB/Goldmedal. |
| 59 | S & F for MCB Single pole and neutral rated capacity 40 amps, 240 Volts breaking capacity 10 KA complete all as specified and as directed. Make - Schindier/Legrand/L&T/ABB/Goldmedal. |
| 60 | S & F for MCB Single pole and neutral rated capacity 32 amps, 240 Volts breaking capacity 10 KA complete all as specified and as directed. Make - Schindier/Legrand/L&T/ABB/Goldmedal. |
| 61 | S & F for MCB Single pole rated capacity 5 to 32 amps, 240 Volts breaking capacity 10 KA complete all as specified and as directed.Make - Schindier/Legrand/L&T/ABB/Goldmedal. |
| 62 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 2.5 Sq mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit and its accessaries ISI marked heavt duty of suitable size including with one run of PVC insulated 2.5 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 2.5 sqmm cable, one run of 2.5 sqmm earth cable and one run of PVC heavy duty conduit will be measured as one unit, including taking down old wiring complete all as specified and directed. |
| 63 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 4 Sq mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit and its accessaries ISI marked heavt duty of suitable size including with one run of PVC insulated 4 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 4 sqmm cable, one run of 4 sqmm earth cable and one run of PVC heavy duty conduit will be measured as one unit, including taking down old wiring complete all as specified and directed. |
| 64 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit and its accessaries ISI marked heavt duty of suitable size including with one run of PVC insulated 6 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable, one run of 6 sqmm earth cable and one run of PVC heavy duty conduit will be measured as one unit, including taking down old wiring complete all as specified and directed. |
| 65 | M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 10 Sq mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit and its accessaries ISI marked heavt duty of suitable size including with one run of PVC insulated 10 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 10 sqmm cable, one run of 10 sqmm earth cable and one run of PVC heavy duty conduit will be measured as one unit, including taking down old wiring complete all as specified and directed. |
| 66 | S & F in replacement of LED 8/10 watt 2 feet white 85lm/W 6500K batten extruded with decorative end caps complete all as specified and as directed. Make- Goldmedal Cat pat No GL9C2001608CD or eqivalent in Bajaj/Wipro/ Havells/Philips. |
| 67 | S& F in replacement of LED Bollard 8 W Cone NXG LED Bollard series acts as an imposing treet furniture with touch of aesthetic. Innovative design with uniformly lit diffuser at the upper portion acts as beacon of path guidance in a landscape environment with robust IP 65 rating with PCC (1:2:4) foundation complete all as specified and directed. Make: Havells Havells Cat Part No CONENXGBLS8WLEDPSYM857TOPC or equivalent in Phillips/Bajaj/Crompton/Wipro. |
| 68 | S & F in replacement of Highly efficient LED 9W inverter bulb B22 CDL, 100 lm/W used as a ready replacement for existing LED direct fit lamp complete all as specified and directed. Make : Havells / crompton/ Bajaj/Surya |
| 69 | S & F in replacement of fan capacitor 2.5 Mfd, 230 Volts incl PVC clams complete all as specified and as directed. |
| 70 | Supply and fix in replacement of LED Bollard fitted garden light fittings 10 W,240V 50 Hz rated input with PCC (1:2:4) foundation higher energy saving LED lighting fixture with environment friendly,energy efficient complete all as specified and directed by Engr-in-charge. Make :- Havells Cat Part No MOUNTBL10WLED857PSYMTOPMMAM or its equivalent in Phillips/Bajaj/Crompton/Wipro |
| 71 | S & F in replacement of LED downlight surface mounted luminare round type 12/18 watts 6500K with inbult driver and polycarbonate opal diffuser white finish operating voltage 230V AC, 50 Hz all as per Havells Cat Part No LHEAAHP71L1W012 or Goldmedal cart part no GL9C0307112CD or its equivalent in Philips,Wipro,Bajaj. |
| 72 | S & F in replacement of LED down light recess mounted luminare, square type 15/18 watts with efficiency of 100 lumens per watt, sleek design aluminium housing polycarbonate diffuser white finish operating voltage 150 V-270 V AC, 50 Hz all as per Make- Havells LHEBFCP6IZ1W015 or Goldmedal Cat part no GL9C0203218CD or its equavalent in Philips/Wipro/Bajaj/Crompton |
| 73 | S & F in replacement of Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire 100 lm/W with opel diffuser pre wired and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb and removal old existing unsv tube light fitting complete all as specified and as directed. Make : Goldmedal Cat part No GL92891W or its equivalent in Wipro/Havells/Philips/Bajaj/Crompton |
| 74 | S & F in replacement of Solar LED pathway lights waterproof outdoor modern led walkway path ighting for garden round 80 cm complete all as specified. Make : Bajaj/Havells/Surya/Wipro/Philips |
| 75 | S & F in replacement of LED 3 W spot light round, Recess mounted downlighter with pressure die-cast aluminium heat sink & clear PC as a cover in white powder coated finish with independent electronic LED driver LED Spot 3W 3000K complete all as specified and as directed. Make- Havells Cat Part No LHEEAQPBIB1W003 or its equivallent model in Wipro/Jaquar/ Philips/ Bajaj |
| 76 | Supply and fix in replacement of post top lantern LED type 20/25 watt 230 watt volts AC outdoor type with decorativepost top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete. complete all as specified and directed by Engineer-in-Charge. Make: Havells Cat part No CORALNXTPT30WLED757PSYMTOPC or equivalent in Wipro/Jaquar/ Philips/ Bajaj. |
| 77 | Supply and fix in replacement of post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorativepost top for 360 degree indirect light IP 66 protection with impact and corrosion resistant complete with driver and lamp complete. complete all as specified and directed by Engineer-in-Charge. Make: Havells Cat part No NEBULAPT40WLED857PSYMTOPCO or equivalent in Wipro/Jaquar/ Philips/ Bajaj |
| 78 | S & F in replacement of wall mounted LED 3/6 watts bed side lamp fitting with necessary electrical connections complete all as specified and as directed. |
| 79 | S & F in replacement of Decorative wall light fixture made up of Polycarbonate, suitable for 9 W LED lamp B22 base with unbreakable globe suitable for LED bulb and including provosion of inverter LED bulb 9/10 watts complete all as specified and as directed. Make- Havells Cat part No -LHFOFWE1TZ1W012 or its equivalent in Wipro, Philips, Bajaj. |
| 80 | Supply and fix in replacement of LED lights fitting 1x 20W, 230V, 100 lm/W AC decorative box type with driver, holder including LED tube light CRCA housing battens are equipped with specially designed Extruded aluminium heat sink, Milky white PC diffuser and Elegantly designed white colored ABS endcaps to enhance the aesthethetics of the luminaire. with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20 watts complete all as specified and as directed. Make :- Havells Cat part No STOUTMINI1200BS20WLED865SPCWH or Gold medal Cat Part No GL9C101520RD or its equvalent in Philips, Wipro, Bajaj. |
| 81 | S & F in replacement of recess mounted 2' x 2' square LED panel 36 watts, 6500K, 100 lm/W Ultra morden designed Modular High Efficancy LED luminaire with specialized High transmittance duel/multi layer prismatic optics for glare free symmetric light distribution offering excellent visual comfort with UGR levels of less than 19. luminaires suitable for Armstrong/Grid ceiling and most wide range of applications having multiple driver options like CISPR 15 compliance, Flicker-free operation, <5% THD complete all as specified and as directed. Make- Havells Cat part No - VENUSNEOHE2x2PLR18-42WLED840MOD or Goldmedal cat part no GL91824CD or its equivalent in Wipro, Philips Bajaj,Crompton/Goldmedal |
| 82 | S & F in replacement of new generation energy saving and environmental friendly long life LED street light capacity 25 watts made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having bottom Opening seperate driver compartment with IP 66 protection 160 lm/W and impact resistance of IK08 and necessary mounting arrangements and provision of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.0 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- Gold medal Cat part no GL9C3101525CD or its equvalent in Philips, Wipro,Crompton. |
| 83 | S & F in replacement of Decorative hanging luminaire with decorative glass shade with suitable holder for LED bulb and provosion of LED inverter bulb 10 watts complete all as specified and as directed. Make : Havells/Philips/Bajaj/Crompton |
| 84 | S & F metal flush box made of GI sheet with earh terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 4 module including removal of old unserviceable one complete all as specified and as directed. |
| 85 | S & F metal flush box made of GI sheet with earh terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 6 module including removal of old unserviceable one complete all as specified and as directed. |
| 86 | S & F metal flush box made of GI sheet with earh terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 8 module including removal of old unserviceable one complete all as specified and as directed. |
| 87 | S & F metal flush box made of GI sheet with earh terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 12 module including removal of old unserviceable one complete all as specified and as directed. |
| 88 | S & F metal flush box made of GI sheet with earh terminal including necessary cutting in wall and POP work as required for matching existing slot in wall of size 18 module including removal of old unserviceable one complete all as specified and as directed. |
| 89 | S & F modular plates white colour with frame of 2 module including removal of old unserviceable one complete complete all as specified and as directed |
| 90 | S & F modular plates white colour with frame of 4 module including removal of old unserviceable one complete complete all as specified and as directed |
| 91 | S & F modular plates white colour with frame of 6 module including removal of old unserviceable one complete complete all as specified and as directed |
| 92 | S & F modular plates white colour with frame of 8 module including removal of old unserviceable one complete complete all as specified and as directed |
| 93 | S & F modular plates white colour with frame of 12 module including removal of old unserviceable one complete complete all as specified and as directed |
| 94 | S & F modular plates white colour with frame of 18 module including removal of old unserviceable one complete complete all as specified and as directed |
| 95 | S & F casing and capping size 40 mm including removal of old unserviceable one complete complete all as specified and as directed |
| 96 | S & F casing and capping size 25 mm including removal of old unserviceable one complete complete all as specified and as directed |
| 97 | S & F casing and capping size 20 mm including removal of old unserviceable one complete complete all as specified and as directed |
| 98 | S & F modular step type fan regulator 120 watt single module suitable for operation on 230 volt 50 HZ AC supply including removal of old unserviceable one complete all as specified and as directed |
| 99 | Supply and replace single core cable PVC insulated and unsheathed multistranded copper conductor of size 1.5 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed. |
| 100 | Supply and replace single core cable PVC insulated and unsheathed multistranded copper conductor of size 2.5 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed. |
| 101 | Supply and replace single core cable PVC insulated and unsheathed multistranded copper conductor of size 4 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed. |
| 102 | Supply and replace single core cable PVC insulated and unsheathed multistranded copper conductor of size 6 Sqmm from sub main wiring including removal old existing unserviceable one complete all as specified and directed. |
| 103 | Fixing only light fitting of any type obtained old serviceable with necessary electrical connections complete all as specified and as directed. |
| 104 | S & F for metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed complete all as specified and as directed |
| 105 | S & F in repair/replacement of RCCB DP rated capacity 32 amps, 240 Volts breaking capacity 10 KA complete all as specified and as directed. Make -Havells Cat Part No DHRACMDF300032 or its equvalent in L&T/Schneider/Indo Asian |
| 106 | S & F in repair/replacement of RCCB DP rated capacity 40 amps, 240 Volts breaking capacity 10 KA complete all as specified and as directed. Make -Havells Cat Part No DHRACMDF300040 or its equvalent in L&T/Schneider/Indo Asian |
| 107 | M&L for Earthing complete with Galvanised Iron earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically at (Earth pit not less than 2.25m deep below ground level) a depth not less than 2.25m below normal ground level with top edge of earth plate at depth not less than 1.5m below normal ground level surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connection by using 4mm dia galvanised earth wire by means of bolts, nuts, check nuts and washers of galvanized iron and protected by 15mm bore GI pipe light grade connected to main switch board or main control board and 20mm bore GI pipe light grade for watering and including funnel, wire mesh, 80mm thick pre-cast RCC (1:2:4) type B-1 cover reinforced with hard drawn steel wire fabric weighing not less than 4Kg/Sqm in lieu of CI cover, PCC (1:2:4) type B-1 pit/chamber including all necessary excavation: and earth work, form work, disposal of surplus soil to a distance not exceeding 50m all as specified and al shown in Electrical Plate No.3 of MES Standard Schedule of Rates 2009 Part-I complete all as specified and directed.Note:- (i) The unit rate shall deemed to include for Test point, PCC pit, 4mm dia GI earth wire from top of the earth plate up to 7.5m above ground level. In case 15mm bore GIprotection pipe required is less than 7.5m, no price adjustment shall be made. (ii) PCC pit shall be provided at least 500mm away from the earth pit and not just on the earth pit and extra cost of additional length of water pipes and fittings, junctions, elbow etc shall be deemed to be included in the unit rate.(iii) On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender