Bids Are invited for Custom Bid For Services - Rev Ing Of Fire Hydrant Network In Jadugoda Mill - Kirloskar Make Horizontal End Suction Pump Model :Cphm 40/26, Along With 15Kw/ 20 Hp, 2900 Rpm Fire Fighting Ie#2 Motor & Accessories (Consisting Of Ms

Sharing tender

Bids Are invited for Custom Bid For Services - Rev Ing Of Fire Hydrant Network In Jadugoda Mill - Kirloskar Make Horizontal End Suction Pump Model :Cphm 40/26, Along With 15Kw/ 20 Hp, 2900 Rpm Fire Fighting Ie#2 Motor & Accessories (Consisting Of Ms Base Frame, Tyre Type Coupling, Coupling Guard, Foundation Nut & Bolts.) , Earth Work In Excavation In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Up To 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil A) All Kinds Of Soil. , Providing And Laying Reinforced Cement Concrete Work In Walls (Any Thickness) Including Attached Pilasters, Buttresses Plinth And String Courses, Fillets Columns , Piers, Abutments, Posts And Struts Etc. Up To Floor Five Level Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement.1:1.5:3 (1 Coarse Sand : 1.5 Coarse Sand : 3Graded Stone Aggregate 20 Mm Nominal Size.) , Centering Shuttering Including Removal Of Form Work For All Types Of Work. For Providing And Fixing Straight Shuttering A) Foundation, Footings, Bases Of Columns Etc. , Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending Placing In Position And Binding All Complete.(Hot Rolled Deformed Base) , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.)Trusses Etc, Including Cutting , Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc, Complete , Providing And Fixing C.I. Sluice Valves (With Cap)-100 Mm Nb Of Ksb/Audco Make Class Ii With Isi Mark Complete With Bolts, Nuts,Rubber Insertions Etc. , Laying Of 150Mm Dia. G. I (Jindal/Tata Tube Make) Medium Duty Pipes Confirm To Relevant Is Codes With All Flanges, Bends, Tees, Junctions, Offset Shoes, Gratings Etc.) Including Any Type Of Joint Filling The Joints Fixing In Position With Cl S, Nails, Spacers Etc Of Approved Make For The Pipes Including Cost Of All Materials Labour, Tools And Tackles Etc. Complete As Per Directions Of Engineer-In-Charge, At Any Level. (No Extra Payment S Will Be Made For Flanges, Nut Bolts Gasket Tee, Bends And All Other Fittings &Welding Work.) , Supplying Of 150 Mm Dia (G.I. Medium Class ) Nominal Bore Pipe (Including Gst)Is 1239 , Supplying Of 150 Mm Dia(G.I.Heavy Class) Nominal Bore With Flange (Including Gst)(Is:3689) , Laying Of 80 Mm Dia. G. I (Jindal/Tata Tube Make) Heavy Duty Pipes Confirm To Relevant Is Codes With All Flanges, Bends, Tees, Junctions, Offset Shoes, Gratings Etc.) Including Any Type Of Joint Filling The Joints Fixing In Position With Cl S, Nails, Spacers Etc Of Approved Make For The Pipes Including Cost Of All Materials Labour, Tools And Tackles Etc. Complete As Per Directions Of Engineer-In-Charge, At Any Level. (No Extra Payment S Will Be Made For Flanges, Nut Bolts Gasket Tee, Bends And All Other Fittings & Welding Work.)Is 1239 , Supplying 80 Mm Dia(G.I.Heavy Class) Nominal Bore Pipe Is 1239(Including Gst) (Heavy Duty) , Supplying 250 Mm Dia(Ms Medium Class) Nominal Bore Pipe Is 1239(Including Gst) (Heavy Duty) , Providing Fixing Fabricated 3 Dia Bend Pipe 1M Projected Outside With Threaded End With Locking Arrangement As Suitable As Per Fire Hydrant Landing Valve And With 3C.S Gate Valve Isi Make. As Per Instruction. , Supply And Installation Of Water /Foam Monitor