Tender For Civil, Carpentry And Plumbing Works Of Prafpul,S60, S62,And Spf At South Site, Barc, Mumbai-400085.
Tender Value
1.08 Crore
Estimated cost
Bid Submission
27 Jul 2026
14 days left
EMD
2.55 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Civil, Carpentry And Plumbing Works Of Prafpul,S60, S62,And Spf At South Site, Barc, Mumbai-400085.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing anodized aluminium work Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately)Anodised Aluminium sections (Minimum anodizing thickness of 15 micron) |
| 2 | Extra for colour anodizing |
| 3 | Aluminium grillProvidng and fixing Aluminium Grill 10 mm thick \\"DECO GRILLE\\" make Model No. DG- 202 in natural Silver anodising of min 15 Micronswith a opening size of 60mm x 45mm and Minimum weight of 4.12 Kg/ Sq.M including providing anfd fixing Suitable 'F' / 'H' section outer frame and mullion fixing with screws complete all as per specifications and as directed at site by the Engineer-in-charge .Aluminium alloy shall be of 6063-T6 with yield strength of minimum 6.5 kg/ sq.mm. |
| 4 | Extra for providing Aluminium Grill 10 mm thick with colour anodised by the manufacturer (Champagne, black, Bronze, Gold colours) complete all as per specifications and as directed at site by the Engineer-in-charge |
| 5 | Aluminium Composite Metal PanelDesigning, providing and fixing of 4 mm thick approved make and shade Aluminium Composite Metal Panel of approved make cladding at different locations including soffits of over-hangs but excluding aluminium frame work with grids filled in with weather silicon sealant as per the drawings. The ACM panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3 mm thick low density polyethelene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet all complete as per approved shop drawings and specification (Aluminium frame work will be paid under reelevant item) |
| 6 | Servicing of rolling shuttersServicing of the following type of rolling shutters of all sizes up to maximum size of 6m x 7m including scaffolding, by dismantling for over-hauling of individual parts for repairing and refixing after repaires i.e top hood shaft cage, shaft case, shaft brackets, springs, main curtain with lathe or mid bar type grills, wicket gate, side guides bottom rails, gear units, bearings, electric motors,starters and thoroughly cleaning all the components, adjusting the tensioning springs, if required overhauling or repairing shaft and gear units, re-conditioning end clips, re-aligning curtain ends, reconditioning dents if any, on the surface bottom rail and side guides, repairing the starter, inspecting, taking out and replacing the damaged or defective components (replacement of parts at extra rate is given under relevant item), ensuring proper locking arrangements from both side and out side including all welding, drilling, straightening , grinding, scaffolding, ladders, tools, tackles, with all consumables, such as lubricants, kerosene, grease etc. and shall hardware such as nuts, bolts, rivets, screws, washers, keys, etc. making good any damages to civil works,cleaning, oiling, greasing and demonstrating proper functioning of the shutters after each service such as nuts, bolts, rivets, screws, washers, keys, etc. and necessary scaffolding etc. all complete as per direction of Engineer-in-charge at site. a) Electrically operated type with lathes or grilled curtain, Mechanical Gear operated and Pull & Push type rolling shutters ( All types of Rolling Shutters) Note:1) Measurement will be done once only, for entire period of contract. 2) The measurement of Rolling shutters will be as per structural openings. 3) Rate includes fixing of rubber gasket min 6mm thick at bottom of rolling shutter on external shutters for prevent entry of reptiles. |
| 7 | Rolling shuttersSupplying and fixing Rolling shutters of approved make as per ISI standards made out of required size of MS lathes 18 gauge interlocked together throughout entire length and jointed together at the end by end locks mounted on specially designed pipes shaft with brackets, side guides and arrangements for inside & outside locking with push and pull operation complete including the cost of providing and fixing necessary springs of required size and M. S top cover of required thickness for rolling shutters. Rolling shutters gear operated type with handles including top hood 0.90 mm thick |
| 8 | Extra over the cost of rolling shutters for providing wicket gate of specified size in the M.S rolling shutters including fixing with fixing arrangements, hinges, locking arrangements, frames etc. all as per standard specifications and as directed by the Engineer-in-chargecomplete. |
| 9 | Motorization of Existing and new rolling shutter for rolling shutters up to 15.00 sq.m opening area.Providing and fixing motorized arrangements for existing and/or new rolling shutters. Item also includes cost of coversion of existing rolling shutters by changing its shaft alongwith suitable fittings nad accessories as suited to motorization work. motorization includes ( with remote & manual operation) including designing, control panels, limit switches,required wiring and cables from panel to motor and required size of shaft etc of approved make all as per standard specifications including commisioning and testing complete as directed by the Engineer-in-charge.(only power supply point will be provided) |
| 10 | Providing, Supplying and replacing in position wherever required the G.I .lathe sections 75mm wide & 18g thick parts after removing the damaged old part carefully including all labour, taxes, duties, scaffolding, transport, welding, drilling, grinding, tools, tackles etc. and with applying one coat of primer wherever required, including transporting the dismantled M.S/ metal scrap and depositing at Trombay stores as directed by the Engineer-in-charge at site. Up to 5.00 M Height |
| 11 | Providing, Supplying and replacing in position wherever required the M. S. bottom rails (pressed type 10G with locking arrangement, handles, etc. in both ends and sides parts after removing the damaged old part carefully including all labour, taxes, duties, scaffolding, transport, welding, drilling, grinding, tools, tackles etc. and with applying one coat of primer wherever required, including transporting the dismantled M.S/ metal scrap and depositing at Trombay stores as directed by the Engineer-in-charge at site. Up to 5.00 M Height |
| 12 | Providing, supplying , fabricating and fixing M.S. hood cover with 0.90 mm thick M.S sheet with supports for rolling shutters complete including erection |
| 13 | Providing, supplying and fixing M.S. guide channals with supports for existing rolling shutters complete including erection. |
| 14 | Providing, supplying and fixing gear wheel to existing rolling shutters complete including erection. (a) 250 mm Dia |
| 15 | Providing, supplying and fixing dead locks in rolling shutters necessary bolt & nuts complete including erection. |
| 16 | Providing, supplying and fixing Side Brackets for Rolling Shutters Complete including erection. |
| 17 | Supplying, providing and fixing of Ball bearing Hinges- Dorma BB4330/ Bb3090 for hollow Metal doors as per spectfications and as directed by EIC |
| 18 | supplying, providing and fixing of supplying, providing and fixing of Dorma- Dead Lock with both side Key Cylinder fittings and fixtures hardware fittings and fixtures for hollow Metal doors as per spectfications and as directed by EIC |
| 19 | Supplying, providing and fixing Dorma- Sash lock- with cylinder & Pure Lever Handle for hollow Metal doors as per spectfications and as directed by EIC |
| 20 | Supplying, providing and fixing Dorma - SS Pull - H- Type handle- 32mm Dia & 600 mm Long for hollow Metal doors as per spectfications and as directed by EIC. |
| 21 | Supplying, providing and fixing Dorma- concealed Flush Bolt- 300 mm for Double door shutter for hollow Metal doors as per spectfications and as directed by EIC. |
| 22 | Supplying, providing and fixing One point panic device PHA 2001 - PHA2102, PHA 2105 L=1300mm-DORMA fittings for hollow Metal doors as per spectfications and as directed by EIC. |
| 23 | Supplying, providing and fixing TWo point panic device PHA 2001 - PHA2102, PHA 2105 L=1300mm-DORMA fittings for hollow Metal doors as per spectfications and as directed by EIC. |
| 24 | Resizing & Refixing existing wooden doors for smooth operation. 1. Existing wooden shutter doors shall make floor touch free (to increase bottom clearance) by plane or cutting as approved manner. 2. If need, replacing existing bottom beading patti with new one, minimum 12 mm thick ( wooden beading if replaced wiil be measured under relevant Item) 3.The job is involved of dismantling/ taking out existing door shutter, un-screwing of hinges, after plane/fixing wooden beading, re-positioning the door shutter, re-fixing of door closer, handles if any etc. compete as directed by EIC. 4.Providing & fixing necessary wooden screws as required manner in position. 5.Adjustements of hinges if required. (Hinges if required replacing shall measured in relevant item) 6.Measurements: Each shutter of size of 1000 mm x 2100 mm shall be measured as one job. |
| 25 | Resizing of existing aluminium door shutter. 1. Existing aluminium framed swing doors shall make floor touch free (to increase bottom clearance) by resizing. 2. The job is involved of dismantling existing shutter totally including accessories/fittings; cutting of aluminium section as required; reassembling.3. Existing damaged/not reusable aluminium sections shall be replaced with new ones and the same will be measured under concerned items on weight basis. 4. Providing and fixing of s.s. tie rods having suitable nutt/bolts system at both ends of shutter if need. 5. Reshaping and re-fixing of existing board panel/glass sheets as required; 6. Re-erecting and repositioning the shutter as earlier. 7. Re-fixing of all fittings such as pull/push handle; hydraulic door closer; hinges; locking arrangement; tower bolts; 8. Replacing the existing damaged rubber gasket lining and aluminium clips with new ones 9. The contractor shall be provided the sundry materials such as rubber gaskets; screws, ms tie rods, Pivot top piece etc and no extra payment will be made for these. 10. If glass panels are broken during handling, the contractor shall replace the same at no extra cost. 11. Supply, inserting and fixing of hard wooden blocks of 150mm length in hinges, floor spring & door closer area of aluminium sections11. Measurements: Each shutter up to size of 1000 mm x 2100 mm will be measured as one job |
| 26 | Miscellaneous Carpentry workCarryiing out Miscellaneous carpentry works by providing suitable highly skilled carpenter mason with valid police verification certificate for entire contract period. Item includes providing set of carpentry hand tools / drilling / cutting machines etc required for carpentry maintenance works for entire period of contract. NOTE: Suitable manpower shall be deployed for the job assigned with safety gears as & whenever required. Workforce shall be deployed as per requirement, including holidays & late working if required. |
| 27 | Miscellaneous plumbing workCarryiing out Miscellaneous plumbing works by providing suitable highly skilled plumber ith valid police verification certificate for entire contract period. Item includes providing set of plumbing hand tools / die set / cutting machines etc required for plumbing maintenance works for entire period of contract. NOTE: Suitable manpower shall be deployed for the job assigned with safety gears as & whenever required. Workforce shall be deployed as per requirement, including holidays & late working if required. |
| 28 | Miscellaneous civil worksCarryiing out Miscellaneous civil works by providing suitable unskilled plumber/mason with valid police verification certificate for entire contract period. Item includes providing set of necessary hand tools, etc required for civil maintenance works for entire period of contract. NOTE: Suitable manpower shall be deployed for the job assigned with safety gears as & whenever required. workforce shall be deployed as per requirement, including holidays & late working if required. |
| 29 | 35 mm thick flush door shutters Providing and fixing 35 mm thick flush door shutters conforming to IS : 2202 non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with internal teak wood lipping 25mm wide and fixing with 4 Nos of 125 mm long Stainless steel Hinges with S.S. wood screws complete. |
| 30 | Laminated sheet Providing and fixing decorative high pressure 1.0 mm thick laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S including cost of adhesive, labour etc. complete as directed |
| 31 | Teak wood battensExtra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Commercial flush door shutters |
| 32 | Clear float glass Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)With clear float glass panes of 6.00 mm thickness |
| 33 | Frosted glass Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item) With frosted glass panes of 6.00 mm thickness |
| 34 | Providing and fixing approved quality and shape star locks cum handle of approved make for sliding shutters |
| 35 | Providing and fixing approved quality stain less steel body roller wheels of approved make for sliding shutters |
| 36 | Silicon sealantFilling the gap between aluminium frame & adjacent RCC / Brick work / Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Up to 5 mm depth and 5 mm width |
| 37 | Stainless steel adjustable friction windows staysProviding and fixing stainless steel (SS 304 Grade) adjustable friction windows stays of size 355 X 19 mm of approved quality with necessary stainless steel screws to the side hung windows as per specifications and as directed by the Engineer-in-charge. |
| 38 | Mortise latchProviding and fixing brass mortise latch and lock of approved make with 6 levers and a pair of lever Brass handles with necessary screws etc complete suitable for fixing in wooden / steel/ FRP/ doors as per specifications. |
| 39 | S.S. butt hingesProviding and fixing IS:12817 marked stainless steel butt hinges of size 125 x 64 x 2.5 mm (heavy weight)\\" GARG' or equivalent approved make with suitable stainless steel screws etc. complete |
| 40 | Stainless steel \\"C\\" type door handlesProviding and fixing pair of stainless steel \\"C\\" type door handles 25 mm dia, 250 mm long SS 304 grade solid rod , of specified size in steel doors/ wooden doors including screws / bolts etc. all as per drawings and specifications complete. |
| 41 | Key less latchProviding and fixing \\"Godrej\\" make mortice Key less latch with chrome or Powder Coated finish and a pair of lever handles with necessary screws etc complete in all kind of airlock, bath / toilet Doors / false ceiling trap doors. |
| 42 | Mortice lock for aluminium doorProviding and fixing approved Ramson/ Godrej make Mortice lock 4 lever with necessary screws, to the Aluminium doors as per specifications including all materials, labour etc. and as directed by the Engineer- In- Charge. |
| 43 | Universal hydraulic door closerProviding and fixing IS: 3564 marked Al die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts \\" Everite/ Hardwyn/Godrej\\" or approved equivalent make complete as per specifications and as directed by the project Engineer. |
| 44 | FRP door shuttersProviding and fixing FRP door shutters flush door / panelled type with plain colour or wooden veneer finish of approved make, design & colour. made out of 1.5 mm thick FRP skin moulded over wooden frame work of 40 mm wide and required thickness wooden styles and minimum 100 mm wide lock rails and wooden blocks for door stoppers, tower bolts, baby latch, aldrop, handles etc. wherever required and core filled with Polyurethane Foam and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges with S.S. wood screws 35 mm thick panelled door type of approved colours including the cost of 100 mm ISI marked heavy quality stainless steel butt hinges with necessary screws. |
| 45 | Heavy duty door closerProviding supply and fixing Door Closer TS 71- DORMA- Std Arm.with necessary accessories and screws etc…. As per manufactures instruction, specifications and as directed by EIC. |
| 46 | Sliding back door closer Design, fabricating and fixing sliding back door closers for aluiminium framed door, clear opening of door-850mm, extension length maximum 1800 mm having speed adjustable, operating without battery or electricity including providing and fixing necessary fittings for sliding door shutter etc complete as directed by EIC and as per clause-25 of specifications. |
| 47 | S S Door handlesProviding and fixing pair of S S Door handles- 22mm dia 250 mm long- KICH- 316 grade in Steel Doors/ wooden Doors including screws / bolts etc. all as per drawings and specifications complete.Sample shall be get approved by the Engineer-in-charge. ( Pair means 2 Nos, 1 set) |
| 48 | Offset type S S Door handlesProviding and fixing pair of offset type S S Door handles- 22 mm dia 250 mm long suitable for aluminium doors including screws / bolts etc. all as per drawings and specifications complete.Sample shall be get approved by the Engineer-in-charge. ( Pair means 2 Nos, 1 set). sample shall got approved by EIC, before purchase of this item. |
| 49 | DORMA floor springProviding, supplying fixing 'DORMA' make BTS 80 Floor Spring with spindle insert closing force EN3, EN4,EN6 with stainless steel satin finish cover plate complete including making cut outs on floor & finishing the same complete |
| 50 | Double action hydraulic floor springProviding and fixing double action hydraulic floor spring of approved brand and manufacturer (conforming to relevant Indian Standard) for doors including cost of cutting floors as required, embedding in floors and cover plates with M.S pivot and single piece of M.S sheet outer box with slide plate etc. complete as per directions of Engineer-in-charge with brass cover plate |
| 51 | LOUVERED OPENING Providing & fixing LOUVERED OPENING of required size in door shutters including making the opening, providing & fixing teak wood louver blades with necessary teak wood frame work, beading & applying one coat of approved wood primer etc. complete. |
| 52 | Providing, Fixing /Replacing the damaged srtainless steel mesh of existing/ new doors and /or to partitons wherever required of required size along with ss304 edge guard plate 30mm wide having 2mm thickness and ss mesh sall be of Stainless steel SS304 - 1.6mm thick with 16 mesh count of approved pattern & design in all type of doors including providing and fixing 25x12 mm second class teak wood beading on both side of shutters, screws, nails etc... complete and disposal of old scrap at designated point for further disposal as directed by EIC. |
| 53 | Vision panelProviding & Fixing / replacing vision panel not exceeding 0.1 sqm in all type of flush door including fixing 4 mm Clear Glass with necessary teak wood/ Aluminium/ms Beadings complete all as per specifications and asdirected by EIC. (Including cost of glass) |
| 54 | Magnetic catcherProviding and fixing heavy duty magnetic catcher triple strip vertical type 40 mm of approved quality in cupboard / ward robe/FRP shutters, including fixing with necessary screws etc. complete . |
| 55 | Providing and fixing Stainless steel hanging heavy quality floor door stopper ISI marked with twin rubber stoppers with necessary screws etc. complete. |
| 56 | Servicing fencing gates Servicing of different sizes m s fencing gates of sizes up to maximum size of 6m x 3m including thoroughly cleaning and over-hauling/greasing of each hinges, etc for ensuring proper locking arrangements from both side with all consumables, such as lubricants, kerosene, grease etc. and demonstrating proper functioning of the shutters after each service etc. and necessary scaffolding etc. all complete as per direction of Engineer-in-charge at site.Note:1) Measurement will be done per year, for entire period of contract.2) The measurement of fencing gates will be as per structural openings. |
| 57 | Double tubular scaffolding systemProviding and fixing double tubular scaffolding system using H- frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding |
| 58 | Refixing of existing aluminium false ceiling panel Only Labour charges for refixing of the existing aluminium false ceiling panel: 1. Following sizes of panel 25and/or /300 mm wide x 1270 mm or 600 mm x 600 mm or 84C panel.2. Providing necessary scaffolding/working ladder. 3. Panels are to be fixed/refixed to false ceiling in existing frame works. |
| 59 | Extra over above item for supply of \\"LUXALON\\" False Ceiling 84C / panels of size 253 and/or 300 mm wide x 1270 mm / 600 mm x 600 mm Un-perforated corrosion resistant Aluminium Magnesium alloy metal Panels of approved colour consisting of Panel 84 mm wide x12.50 mm deep x 0.50 mm thick with square edges and recess flange of 24 mm, panel length up to 6.00 metres, coil coated on a continuous paint line. Double baked and roll formed from double baked enamelled corrosion resistant Aluminium Magnesium alloy AA 5050 for higher strength and good roll forming characteristics. |
| 60 | MS hollow tubular sectionsProviding, supplying, cutting, welding, fabricating, hoisting and fixing in position structural steel members like trusses, purlins, posts etc. using MS hollow / circular / square / rectangular tubular sections including appling a coat of Zinc chromate primer of approved make all as per specifications, drawings and as directed by the Engineer in charge |
| 61 | Structural SteelProviding Structural steel work using angles, channels, joists, MS plates and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge Up to and including 300 mm Joists, 350 mm channels, MS plates and below sections using materials produced by SAIL / RINL (Vizag Steel) / TATA. All test reports to be provided along with the supply of the materials |
| 62 | M.S Plain Plates and chequrred Plates Providing Structural steel work in M.S Plain Plates and chequrred Plates for Embedded Parts, Trench Covers, Connection plates etc.including cutting, hoisting, fixing in position and applying a priming coat of approved zinc chromate steel primer etc.including cost of structural steel Plates, welding all labour charges etc. complete as per drawings and specifications. Using materials of approved manufacturers. (other than SAIL/VIZAG/ TATA ) All test reports to be provided along with the supply of the materials |
| 63 | Reinforcement SteelProviding Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. Steel supplied by the contractor Using TMT bars of specified grades all dia bars. TMT bars to be supplied by the contractor manufactured by other than SAIL, RINL or TATA and approved brands of BARC only |
| 64 | Reinforced Cement Concrete (RCC) M-30Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level. |
| 65 | PCC 1:1.5:3Providing and laying in position cement concrete of 1:1.5:3 at all levels (1 cement, 1.5 crushed sand, 3 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc.. complete as per specifications and drawings but excluding the cost of shuttering, centering and steel reinforcement. |
| 66 | PCC 1:3:6Providing and laying in position cement concrete of 1:3:6 (1 cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20 mm) including consolidation, finishing, curing etc. complete as per specificationsand drawings but excluding the cost of Form work shuttering, centering Complete at all levels |
| 67 | Extra for RCC& PCC Using Ready Mix Concrete from outside project area including transporting and pumping from approved batching plants . |
| 68 | Shuttering Form work Providing , centering ,shuttering Form work using PVC Film faced plywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings and specifications at all levels. For Super structure. |
| 69 | 50 mm thick cement concrete flooringProviding and laying 50 mm thick cement concrete flooring with concrete hardner topping under layer 38 mm thick cement concrete 1:2:4 and top layer 12 mm thick wearing surface with metallic floor hardner, cement being mixed with metallic floor hardner of approved quality and make in the ratio of 4:1 (4 cement and 1 metallic floor hardner) by weight and this cement hardner compound mixed with 6 mm down graded stone aggregate in the ratio of 1:2 by volume including providing and fixing 25 X 3 mm aluminium strip,This includes cost of cement slurry, finishing to the required finishing and cleaning neatly while handing over the areas etc. complete as per specifications and drawings. |
| 70 | Brick workProviding and constructing Brickwork in cement mortar 1:4 using crushed sand with Flyash/ Flyash Lime bricks with minimum 70 kg/ sq.cm strength of approved make and size in super structure up to and including Floor II Level including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings.\\" |
| 71 | Half brick masonry using Flyash bricksProviding and constructing Half brick masonry using Flyash/ Flyash Lime bricks with minimum 70 kg / Sq.cm strength of approved make and size in partition walls in C.M 1:4 (using crushed sand) including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications but excluding reinforcement in Super Structure up to Floor - II level. (Reinforcement will be paid under relevant item) |
| 72 | 15 mm thick internal plasteringProviding 15 mm thick plastering using Ready mix internal plastering compound of approved make for internal faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in-charge |
| 73 | Micro concreteProviding SFMC Micro concrete for strengthening of structural members including mixing, pouring, curing as per manufacturer specifications and as directed by the Engineer-in-chargeUsing 100% SFMC |
| 74 | Structural repairsProviding structural repairs in old damaged concrete structures / surfaces with approved Polymer with following operations 1) Removal of loose/Spalled or damaged concrete by chipping and cleaning the concrete surface and reinforcement steel with wire brush and with water 2) Cleaning the re bars with Acetone for complete rust removal and washing with water to make the surface clean. 3) Applying protective coat / bond coat using polymer and cement in the proportion of 1; 1.5 (1 part of polymer and 1.5 parts of cement in synthetic enamal paint like consistancy with brush 4) Reinstate the area with polymer modified mortar in layers of maximum 20 mm with the proportion of Cement 50 Kg : washed and dried river sand 87.50 kg ; silica sand 37.50 Kg. mixed with 10 litres of Polymer (or 1 Kg cement : 1.75 kg washed and dried river sand ; 0.75 Kg silica sand : 200 ml polymer)5) If thickness of repair exceeds 20mm , after every 20 mm thick repair, bond coat as per 2 above to be applied and further thick of repair to be continued for each layer. This work is inclusive of all materials, labour, complete all as directed at site using approved polymer suitable for structural repair shall be used) |
| 75 | G.I. chicken meshProviding and fixing G.I. chicken mesh in the junctions of concrete & brick work / masonry or as directed by the Engineer in charge including cutting, fixing with nails in position before plastering complete all as directed by the Engineer-in-charge. (only area of the chicken mesh used alone will be measured) |
| 76 | Granite workProviding and fixing Minimum 17 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Jet Black colour for kitchen platforms, vanitiy counters, wash basin counters, door frames, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete at all levels. Note: cost moulding and polishing of granite edges as per required by EIC is included in the item. |
| 77 | Granite roughened by flaming method other than black colourProviding and fixing minimum 17 mm thick gang saw cut roughened by flaming method machine cut other than black colour granite for platforms/steps and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing etc.Granite steps shall be fixed in required shapes and patterns like sandwitch/fixing double granite with epoxy resin hardner/Araldite) etc complete as directed by the Engineer-in-charge at all levels. |
| 78 | Extra for providing edge moulding to 17 mm thick Granite Slab counters, Vanitis etc. including machine polishing to edge to give high gloss finish et. Complete as per design approved by Engineer-in-charge. |
| 79 | HST STUD Type M-12 X 145 mm Long Anchor FastnersProviding and Fixing Anchor Fastner of approved make including drilling in concrete as per requirement for fixing Eps or other structures all as specified by the manufacturer complete all as per specifications and drawings. |
| 80 | Providing and Fixing HILTI Anchors HST STUD Type M-10 X 130 mm Long including drilling in concrete as per requirement for fixing Eps or other structures all as specified by the manufacturer complete all as per specifications and drawings. |
| 81 | Counter top wash basin Providing and fixing white vitreous counter top wash basin of size 480mm x 380 mmx140mm of approved make including making all connections but excluding the cost of fittings etc. complete all as per specifications and as directed by the Engineer-in-charge. 1).Table top basin, size:480 x380x140 mm, Cat No:JDS-WHT-25909, Jaquar. 2)Concealed 40 mm PVC waste pipe of Heavy quality connection from wash basin to Floor Trap. 3)waste coupling 32 mm size full thread with 130 mm height-ald-chr-705130. 4)Bottle Trap (with internal partition) 32 mm size with both 300 mm long connecting pipes & wall flanges -ALD-CHR-769L300X300. |
| 82 | Urinal sensorProviding and fixing URINAL FLUSHER recessed SELF FLUSH INFRA-RED sensor + Manual, Power : Electrical (AC 220V, 50Hz) + Battery (4 x AA Duracell) for urinals of working pressure .05Mpa -0.70 Mpa, Sensing Range : 65 cm ± 5 cm, Dia of Inlet/ Outlet Pipe :Dn 15 ( G1/2”) with all necessary acessories including flexible hose for connection in inlet & outlet sides, complete as directed by the Engineer-in-charge and as per manufactures instructions. Apx size 135mmx180mmx60mm. |
| 83 | Automatic sensor tapProviding & fixing approved type Automatic Sensor tap INFRA-RED sensor + Manual, Power : Electrical (AC 220V, 50Hz) + Battery (4 x AA Duracell) for wash basin of working pressure .05Mpa -0.70 Mpa, Sensing Range : 65 cm ± 5 cm, Dia of Inlet/ Outlet Pipe :Dn 15 ( G1/2”) with all necessary acessories including flexible hose for connection in inlet & outlet sides, complete as directed by the Engineer-in-charge and as per manufactures instructions. |
| 84 | Indian water closetProviding and fixing Indian water closet (Orissa pan) of apperoved make with 100 mm China ware P or S trap, One no. 10 litre High level or low level white PVC flushing cistern with flush pipe & bend with manually controlled device (handle lever) conforming to IS:7231, PVC 15 mm Inlet connection with all fittings and fixtures complete including all connection, embedding in position commissioning, cleaning etc. all as per drawings and specifications and as directed by the Engineer-in-charge. White Vitreous china Orissa pattern W.C. pan of size 580x440 mm |
| 85 | Wall mounted EWC Providing and fixing white vitreous china wall mounted European type Water Closet with 'P' or 'S' Trap with solid seat and lid of approved make, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231, flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing , commissioning & cleaning etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge.E.W.C. pan in White colour with ISI marked white solid plastic seat and lid. |
| 86 | Gents toilet name plate with sign Providing and fixng toilet name plate and sign consisting with stainless steel plate, size-225x150mm for Gents toilet. |
| 87 | URINAL MAT Supplying and laying refresh Urinal screen mat of standard size for urinal pan of M/s ARNI make or approved etc complete as per specification. Note:1 set=10pc |
| 88 | Toilet paper holder Providing and fixing stainless steel toilet paper holder recessed type of approved make and type with S.S screws as directed by the Engineer-in-charge complete. TOILET ROLL HOLDER WITH FLAP AKP-CHR-35753P |
| 89 | Fancy MirrorProviding and fixing 6 mm thick mirrors of required size of approved make with decorative frame edges complete with 6 mm thick asbestos sheet back ground fixed to walls with SS STUDS and concealed washers complete. all as per specifications and as directed by the Engineer-in-charge . |
| 90 | Aerosol perfume dispenserProviding & fixing approved type Aerosol perfume dispenser polycarbovate ABS casing of Euronics model EA24 Didigtal LED 300MLcapacty with refill can with S.S brackets, cap etc. fixed to wall with C.P. brass screws, & screwed on to wooden rawl plugs etc. complete. |
| 91 | Aerosol perfume dispenser refillProviding & fixing approved type Aerosol perfume dispenser refill suitable for polycarbovate ABS casing of Euronics model EA24 Didigtal LED 300MLcapacty etc. complete. |
| 92 | Angle cock Providing and fixing C.P brass Angle cock of heavy quality of specified / approved make, for wash basin inlet / flush cistern etc. as per specifications and as directed by the Engineer-in-charge Providing and Fixing 15 mm CP brass Angle stop cock of approved make- quarter Turn |
| 93 | Heavy qualilty BIB cockProviding and fixing C.P brass bib cock of heavy quality of specified / approved make as per specifications and as directed by the Engineer-in-charge .15 mm dia Exposed part kit of single concealed stop cock consisting of operating level, cartridge sleeve, wall flange & basin spout(compatible with ALD-441) cat no: KUP-CHR-35441 KPM. |
| 94 | C.P.brass pillar cock elbow operatedProviding and fixing Heavy Quality C.P Brass Pillar cock ELBOW operated of \\"Jaquar \\" make and type as per specifications and as directed by the Project Engineer (Samples to be got approved by the Project Engineer) |
| 95 | C.I. NAHANI TRAPProviding and fixing cast iron nahani trap / floor trap of 100 mm inlet and 75 mm outlet, (weighing 5.80 Kg each), jointing with lead with the connection pipes, placing as per the drawings, embedding in cement concrete 1:2: 4 and making circular hole up to floor level using 110 mm O/D PVC pipes of 6 Kg / sq.cm pressure and fixing 1 No 125 mm dia C. P brass grating , complete all as specifications and drawings and as directed by the Engineer-in-charge |
| 96 | Automatic Hand dryerProviding & fixing approved type heavy duty hi speed Euronics Automatic Hand dryer of S.S. Body of make Euronics adn model PLUTO PHD501 with S.S brackets, cap etc. fixed to wall with C.P. brass screws, & screwed on to wooden rawl plugs etc. complete. |
| 97 | Stainless steel sinkProviding and fixing satin finish stainless steel AISI 304 (18/8) kitchen sink of size 610 x 510 mm without drain board and bowl size 685 x 535 x 250 mm depth as per IS13983 of approved make, with C.I. brackets, fittings and stainless steel plug 40 mm including painting the fittings and brackets with 3 coats of white enamel paint over a coat of primer, cutting and making good the walls wherever requried complete as per specifications and as directed by the Engineer-in-charge. |
| 98 | C.I. FRAME & COVERSupplying and fixing Cast Iron Man hole or Cast Iron Steps/ cover / CI Grating of approved make and weight as specified in the drawings or as directed by the Engineer in charge. |
| 99 | CPVC pipes for drainageProviding and fixing Chlorinated PVC (CPVC) pipes having thermal stability for hot & cold water supply (as ASTM Standard 2846 & SDR - 11 Grade) including all CPVC Plain & Brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with CPVC Solvent cement & testing the joints complete all as per specifications, drawings and as directed by the Project Engineer. 50 mm outer dia CPVC pipe (External/Concealed) |
| 100 | 50 mm n.b Gate ValvesProviding & fixing in position heavy pattern screw down gun metal gate valve with handles and wheels of approved make including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge |
| 101 | 40 mm n.b Gate ValvesProviding & fixing in position heavy pattern screw down gun metal gate valve with handles and wheels of approved make including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge |
| 102 | 25 mm n.b. Gate ValvesProviding & fixing in position heavy pattern screw down gun metal gate valve with handles and wheels of approved make including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge |
| 103 | 15mm n.b.Gate ValvesProviding & fixing in position heavy pattern screw down gun metal gate valve with handles and wheels of approved make including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge |
| 104 | 15 mm dia G.I pipe Exclusive TATA Make M.S.Galvanised pipesProviding , Laying , jointing, fixing and testing Heavy quality (C-Class) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing Teflon tape, exposed / concealed by chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint for all concealed lines / two coats of synthetic enamel paint for all exposed lines all as directed by the Engineer-in-charge. Pipes with exclusive use of TATA make C-Class pipes. |
| 105 | 20 mm dia G.I pipe Exclusive TATA Make |
| 106 | 25 mm n/b G.I pipe Exclusive TATA Make |
| 107 | 40 mm dia G.I pipe Exclusive TATA Make |
| 108 | 50 mm dia G.I pipe Exclusive TATA Make |
| 109 | CPVC Pipes 20 mm OD SDR 11 |
| 110 | CPVC Pipes 25 mm OD SDR 11 |
| 111 | Cleaning of bottle traps of lab sink/ wash basinsOpening of bottle trap from its joint and cleaning the complete trap system and refitting,refixing same to sinks,wash basins etc. and as directed by EIC ( Note:- If bottle trap is found in unused condition it will be supplied by department at free of cost). |
| 112 | Removal of chokages in EWC/IWC/AIWC.Cleaning and removal chokages of sewarage wastes,muck,frozen sewage cakes etc. from EWC/IWC/AIWC manually, including cost of labour, tools like choke remover, trooly of sewage muck for disposal of designated place, all complete in all respect and as directed. |
| 113 | Repairing of bibs tap/pillar tap/stop cock etc.Repairing of bibs tap/pillar tap/stop cock etc. by changing with the spindle, new washers etc. as per site requirement & directed by Engineer-In-Charge. |
| 114 | Replacement of exisitng damaged spare parts complete set of concealed Flush tank of Ms Jaquar or equivalent suitable to exisitng flush tank as per site requirement & directed by Engineer-In-Charge. |
| 115 | Removing existing damaged and non workable flush tank handles and replacing with new flush handles for slimeline or champion make & of required type approved fittings as per site requirement & directed by Engineer-In-Charge. |
| 116 | Removing existing damaged and non workable washers and replacing with new washers of flushing system of E.W.C. approved fittings as per site requirement & directed by Engineer-In-Charge. |
| 117 | Providing and fixing heavy quality stainless steel / C.P brass grating of approved equvalent make as specified for floor traps / nahani traps all as directed by the Engineer-in-charge |
| 118 | Flushing cisternProviding and fixing PVC low level / high level flushing cistern 10 litre capacity of approved make in white colour with flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures etc. complete as per specifications and as directed by the Engineer-in-charge. |
| 119 | Rectify the pipe leakageLabour charges only for rectify the pipe leakage by fixing temporary clamps including preperation of clamps and gaskets for water lines in false ceilings / walls / service ducts, under ground services etc.. & joining the line by welding / threading etc... as per site requirement there after in G.I pipelines up to 100mm dia in RLG building. |
| 120 | Connection of distribution branchMaking connection of distribution branch with G.I main of 25 to 80 mm nominal bore by providing and fixing tee including cutting and threading the pipes etc. complete as per specifications and as directed by the Engineer-in-charge |
| 121 | constructioning Inspection chambersProviding and constructioning Inspection chambers of Internal size clear dimention of 900 x 600 mm in 230 thick brick masonry with cement mortat 1:4 over a bed of 150 mm thick 1:4:8 cement concrete foundation, plastering with cement mortar 1:4 20 mm thick on inside, out side and all exposed sufaces finished with a floating coat of neat cement, brick corbelling at top to provide opening of 900 X 450 mm, embedding the frame and cover with CC 1:2:4 concrete, and fixing cast iron steps if necessary at 300mm intervals complete . Depth of chamber not exceeding 900 mm. (excavation, soling, cast iron cover and C.I steps will be paid separately under relevant item) |
| 122 | Extra depth over initial depth of 900 mm for chambers of 900 x 600 mm internal size.including fixing cast iron steps (C.I steps shall be paid under relevant item) |
| 123 | Providing and fixing heavy quality health faucet with 1.50 metres long flexible hose (hand shower) of approved make with wall brackets and type as per specifications and as directed by theEngineer-in-charge |
| 124 | Closing opening in brickwork upto 1.00 SqMProviding and constructing brick work for closing opening in brickwork upto 1.00 SqM in cement mortar using standard bricks including 15mm thick plastering on both faces using readymix plaster , curing, raking out joints complete as per specifications and as directed by the Engineer-in-charge |
| 125 | Core cutting in RCC beyond 100 mm up to and including 150 mm Dia |
| 126 | Providing complete preventive servicing, inspection, testing, troubleshooting, minor repairs, and replacement of worn-out consumable spare parts for Walk-Behind Electrically Operated Auto Scrubber Drier Machine Model E 4545 of M/s Roots Scrub including all labor, tools, tackles, consumables, and transportation as per OEM standards etc. Item shall be carried out on every six monthly basis.. |
| 127 | Providing, supplying, fitting, testing, and commissioning of the following spare parts for Walk-Behind Electrically Operated Auto Scrubber Drier Machine including dismantling of old parts, installation of new parts, alignment, testing, minor adjustments, consumables, tools & tackles, and disposal of unserviceable materials as directed by Engineer-in-Charge. All spare parts shall be OEM make or approved equivalent and compatible with the existing machine model.Scope Includes Replacement of Following Parts 1. Scrubbing Brushes / Pad Drivers2.Floor Pads (as applicable – Red/Black/White or equivalent) 3.Squeegee Rubber Blades (Front & Rear Set) 4.Suction Hose 5.Water Filters / Strainersetc |
| 128 | Earth work excavationEarth work excavation by mechanical means (Hydraulic excavator) / manual means in all types of soil other than soft and hard rock, dressing the sides of foundation, ramming of bottom etc. including shoring and dewatering (if necessary) and refilling with selected excavated earth in layers of not more than 500 mm thick, each layer well rammed and consolidated including disposing the surplus earth within a distance of 200 m all as per specifications including clearing Jungle, uprooting of vegetation, grass, etc. complete and as directed by the Engineer-in-charge (a) From 0.00 to 1.50 m depth from Average Ground Level |
| 129 | Supplying, stacking and laying of 230 mm thick rubble soling stones as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge |
| 130 | Dismantling plain cement concreteDismantling plain cement concrete manually / by mechanical means carefully without damaging adjacent structures including disposal of debris within 200 m lead as per direction of Engineer-in-charge |
| 131 | Demolishing C.C / R.C.C worksDemolishing C.C / R.C.C works by mechanical means and stock piling at designated locations carefully with out damaging adjacent structures and disposal of dismantled materials up to a lead of 100 m, stacking serviceable and unserviceable materials separately including cutting reinforcement bars all as directed at site. |
| 132 | Dismantling brick workDismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge |
| 133 | Dismantling doors, windows of Area beyond 3.00 Sq.M Dismantling doors, windows and clear storey openings (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows) Area beyond 3.00 Sq.M |
| 134 | Dismantling steel workDismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismantling and stacking within 100 m lead |
| 135 | Dismantling tile workDismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m lead for thickness of tiles above 10 mm and up to 25 mm |
| 136 | Dismantling partition/False ceiling workDismantling Aluminium / Gypsum partitions, doors, windows, fixed glazing, cement asbestos, Celotax or other hard board ceiling or partiton walls at site including disposal of unserviceable surplaus material and stacking of serviceable materials within 100 m lead as directed by the Engineer-in-charge |
| 137 | Dismantling waterline pipes Dismantling G.I pipes/ PVC pipes of all diameter external work including excavation and refilling trenches after taking out pipes manually / by mechanical means including stacking of pipes within 100 m lead as per direction of Engineer-in-charge |
| 138 | Dismantling old plaster / skirtingDismantling old plaster / skirting carefully , raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100 m lead Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender