Tender For Civil Upgradation Works 2026-27 Of Hlud At South Site, Barc, Trombay, Mumbai-400085.
Tender Value
2.03 Crore
Estimated cost
Bid Submission
29 Jul 2026
18 days left
EMD
4.79 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Civil Upgradation Works 2026-27 Of Hlud At South Site, Barc, Trombay, Mumbai-400085.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing anodized aluminium work Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately)Anodised Aluminium sections (Minimum anodizing thickness of 15 micron) |
| 2 | Extra for colour anodizing |
| 3 | Aluminium grillProvidng and fixing Aluminium Grill 10 mm thick \\"DECO GRILLE\\" make Model No. DG- 202 in natural Silver anodising of min 15 Micronswith a opening size of 60mm x 45mm and Minimum weight of 4.12 Kg/ Sq.M including providing anfd fixing Suitable 'F' / 'H' section outer frame and mullion fixing with screws complete all as per specifications and as directed at site by the Engineer-in-charge .Aluminium alloy shall be of 6063-T6 with yield strength of minimum 6.5 kg/ sq.mm. |
| 4 | Extra for providing Aluminium Grill 10 mm thick with colour anodised by the manufacturer (Champagne, black, Bronze, Gold colours) complete all as per specifications and as directed at site by the Engineer-in-charge |
| 5 | Aluminium Composite Metal PanelDesigning, providing and fixing of 4 mm thick approved make and shade Aluminium Composite Metal Panel of approved make cladding at different locations including soffits of over-hangs but excluding aluminium frame work with grids filled in with weather silicon sealant as per the drawings. The ACM panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3 mm thick low density polyethelene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet all complete as per approved shop drawings and specification (Aluminium frame work will be paid under reelevant item) |
| 6 | Providing Raised and cut pointing on stone with cement mortar 1:3 usingready mix plaster as per specifications and as directed at site by the Engineer-in-charge |
| 7 | Providing and fixing hand rail using 304 grade Stainless Steel pipes of approved size and make and quality by welding, mirror / matt polishing, fixing at site etc. for balcony railing & staircases railing including special sections as per drawings, specifications. complete as directed by the Engineer-in-charge |
| 8 | Double tubular scaffolding systemProviding and fixing double tubular scaffolding system using H- frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding |
| 9 | MS hollow tubular sectionsProviding, supplying, cutting, welding, fabricating, hoisting and fixing in position structural steel members like trusses, purlins, posts etc. using MS hollow / circular / square / rectangular tubular sections including appling a coat of Zinc chromate primer of approved make all as per specifications, drawings and as directed by the Engineer in charge |
| 10 | Structural SteelProviding Structural steel work using angles, channels, joists, MS plates and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge Up to and including 300 mm Joists, 350 mm channels, MS plates and below sections using materials produced by SAIL / RINL (Vizag Steel) / TATA. All test reports to be provided along with the supply of the materials |
| 11 | M.S Plain Plates and chequrred Plates Providing Structural steel work in M.S Plain Plates and chequrred Plates for Embedded Parts, Trench Covers, Connection plates etc.including cutting, hoisting, fixing in position and applying a priming coat of approved zinc chromate steel primer etc.including cost of structural steel Plates, welding all labour charges etc. complete as per drawings and specifications. Using materials of approved manufacturers. (other than SAIL/VIZAG/ TATA ) All test reports to be provided along with the supplyof the materials |
| 12 | Structural steel work in Hand RailProviding and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing & staircases railing including applying a priming coat of zinc chromate steel primer etc. complete as per specifications using M.S tubes of ISI marked (Medium) of specified diameter and thickness |
| 13 | Extra for galvanizing minimum 80 micron thick galvanised coating on structural steel work including all charges etc. as directed by the Engineer-in-charge. |
| 14 | Reinforcement SteelProviding Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules,cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings.Steel supplied by the contractor Using TMT bars of specified grades all dia bars. TMT bars to be supplied by the contractor manufactured by other than SAIL, RINL or TATA and approved brands of BARC only |
| 15 | Reinforced Cement Concrete (RCC) M-30Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level. |
| 16 | PCC 1:1.5:3Providing and laying in position cement concrete of 1:1.5:3 at all levels (1 cement, 1.5 crushed sand, 3 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc.. complete as per specifications and drawings but excluding the cost of shuttering, centering and steel reinforcement. |
| 17 | PCC 1:3:6Providing and laying in position cement concrete of 1:3:6 (1 cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20 mm) including consolidation, finishing, curing etc. complete as per specificationsand drawings but excluding the cost of Form work shuttering, centering Complete at all levels |
| 18 | Extra for RCC& PCC Using Ready Mix Concrete from outside project area including transporting and pumping from approved batching plants . |
| 19 | Shuttering Form work Providing , centering ,shuttering Form work using PVC Film faced plywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings and specifications at all levels. For Super structure. |
| 20 | 50 mm thick cement concrete flooringProviding and laying 50 mm thick cement concrete flooring with concrete hardner topping under layer 38 mm thick cement concrete 1:2:4 and top layer 12 mm thick wearing surface with metallic floor hardner, cement being mixed with metallic floor hardner of approved quality and make in the ratio of 4:1 (4 cement and 1 metallic floor hardner) by weight and this cement hardner compound mixed with 6 mm down graded stone aggregate in the ratio of 1:2 by volume including providing and fixing 25 X 3 mm aluminium strip,This includes cost of cement slurry, finishing to the required finishing and cleaning neatly while handing over the areas etc. complete as per specifications and drawings. |
| 21 | Half brick masonry using Flyash bricksProviding and constructing Half brick masonry using Flyash/ Flyash Lime bricks with minimum 70 kg / Sq.cm strength of approved make and size in partition walls in C.M 1:4 (using crushed sand) including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications but excluding reinforcement in Super Structure up to Floor - II level. (Reinforcement will be paid under relevant item) |
| 22 | 15 mm thick internal plasteringProviding 15 mm thick plastering using Ready mix internal plastering compound of approved make for internal faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in-charge |
| 23 | Structural repairsProviding structural repairs in old damaged concrete structures / surfaces with approved Polymer with following operations 1) Removal of loose/Spalled or damaged concrete by chipping and cleaning the concrete surface and reinforcement steel with wire brush and with water 2) Cleaning the re bars with Acetone for complete rust removal and washing with water to make the surface clean. 3) Applying protective coat / bond coat using polymer and cement in the proportion of 1; 1.5 (1 part of polymer and 1.5 parts of cement in synthetic enamal paint like consistancy with brush 4) Reinstate the area with polymer modified mortar in layers of maximum 20 mm with the proportion of Cement 50 Kg : washed and dried river sand 87.50 kg ; silica sand 37.50 Kg. mixed with 10 litres of Polymer (or 1 Kg cement : 1.75 kg washed and dried river sand ; 0.75 Kg silica sand : 200 ml polymer)5) If thickness of repair exceeds 20mm , after every 20 mm thick repair, bond coat as per 2 above to be applied and further thick of repair to be continued for each layer. This work is inclusive of all materials, labour, complete all as directed at site using approved polymer suitable for structural repair shall be used) |
| 24 | Glazed VITRIFIED tilesProviding and fixing Glazed VITRIFIED wall tiles/ floor tiles of approved make in different sizes Using Tiles of size above 600x 600mm and up to and including 900 x 900mm conforming to IS 15622 in all colours and shades in Glossy or Matt or satin finish laid over a bed of minimum 20 mm thick bed of cement mortar 1:4 (using Crushed sand) for floor/ over 12 mm thick bed of cement mortar 1:3 (using crushed sand) and jointing with grey cement slurry including grouting with the joints with white cement based Tile Grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge |
| 25 | Add Extra for polymer mortar in place of cement mortar |
| 26 | Ceramic glazed floor tilesProviding and fixing 1st quality ceramic glazed floor tiles of minimum 300 - 600 mm long and 300 - 600 mm wide and thickness not less than 6 mm conforming to IS 15622 of approved make in all colours and shades as approved by Engineer-in-charge over a bed of 20 mm thick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Enginner-in-charge |
| 27 | Ceramic glazed wall tilesProviding and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 of approved make. shade and colour of size ranging from 600 - 1200 mm long and 300 mm - 600 mm wide and thickness not less than 6 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge. |
| 28 | Cement based waterproofingProviding and laying water proofing treatment in sunken portions of WCs, bath rooms etc. by appying cement slurry mixed with water proofing cement compound consisting of applying: (a) 1st layer of slurry of cement @ 0.488 kg / sq.m mixed with water proofing cement compound @ 0.253 kg per sq.m. including injecting cemnt slurry .This layer will be allowed to air cure for 4 hours. (b) 2nd layer of slurry of cement @ 0.242 kg / sq.m mixed with water proofing cement compound @ 0.126 kg / sq.m. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with cement slurry. Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (using crushed sand) admixed with proprietary water proofing compound conforming to relevant IS and approved by Engineer-in-charge including mixing 'RECRON 3S' fibre at the rate of 125 grams per 50 kg of cement in top layer of plaster and finally finishing the surface with trowel with neat cement slury in bottom and all the sides of sunken portion. complete as directed by the Enginer-in-charge. The treatment to be tested for water tightness before filling the sunken areas. |
| 29 | Granite workProviding and fixing Minimum 17 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Jet Black colour for kitchen platforms, vanitiy counters, wash basin counters, door frames, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete at all levels.Note: cost moulding and polishing of granite edges as per required by EIC is included in the item. |
| 30 | Extra for providing edge moulding to 17 mm thick Granite Slab counters, Vanitis etc. including machine polishing to edge to give high gloss finish et. Complete as per design approved by Engineer-in-charge. |
| 31 | Clear float glass Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)With clear float glass panes of 6.00 mm thickness |
| 32 | Providing and fixing approved quality and shape star locks cum handle of approved make for sliding shutters |
| 33 | Providing and fixing approved quality stain less steel body roller wheels of approved make for sliding shutters |
| 34 | Silicon sealantFilling the gap between aluminium frame & adjacent RCC / Brick work / Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Up to 5 mm depth and 5 mm width |
| 35 | S.S. butt hingesProviding and fixing IS:12817 marked stainless steel butt hinges of size 125 x 64 x 2.5 mm (heavy weight)\\" GARG' or equivalent approved make with suitable stainless steel screws etc. complete |
| 36 | Stainless steel \\"C\\" type door handlesProviding and fixing pair of stainless steel \\"C\\" type door handles 25 mm dia, 250 mm long SS 304 grade solid rod , of specified size in steel doors/ wooden doors including screws / bolts etc. all as per drawings and specifications complete. |
| 37 | Mortice lock for aluminium doorProviding and fixing approved Ramson/ Godrej make Mortice lock 4 lever with necessary screws, to the Aluminium doors as per specifications including all materials, labour etc. and as directed by the Engineer- In- Charge. |
| 38 | Universal hydraulic door closerProviding and fixing IS: 3564 marked Al die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts \\" Everite/ Hardwyn/Godrej\\" or approved equivalent make complete as per specifications and as directed by the project Engineer. |
| 39 | Mortice lock for aluminium doorProviding and fixing approved Ramson/ Godrej make Mortice lock 4 lever with necessary screws, to the Aluminium doors as per specifications including all materials, labour etc. and as directed by the Engineer- In- Charge. |
| 40 | Magnetic catcherProviding and fixing heavy duty magnetic catcher triple strip vertical type 40 mm of approved quality in cupboard / ward robe/FRP shutters, including fixing with necessary screws etc. complete . |
| 41 | General steel double shutter door (G.I.) for wall opening 1500MM (Width)X2200MM (Height) approximately including supplying, providing and fixing of required hardware fittings and fixtures. etc. complete as per detailed technical specifications and as directed by Engineer in charge.Providing and fixing of Hollow metal doors (Single leaf /Double leaf) fully panelled and/or with partly louvered and/or vision panel as per site requirements. Doors shall confirm IS 3614 part-1 & part-2 for stability and integrity. Pressed Galvanized steel confirming to IS 277 with given specifications. Door frame shall be double rebate profile of size 143 x 57 mm made out of 1.60mm (16gauge) minimum thickness and shutter skin thickness of 1.20mm minimum thick galvanized steel sheet. Once frame installed should be grouted with cement & sand slurry necessary for fire doors on the clear masonry opening. All doors and frames shall be finished with polyurethane aliphatic grade paint of approved colour. Item also includes supplying, providing and fixing of required hardware fittings and fixtures. etc. complete as per Clause of technical specifications.and as directed by Engineer in charge. |
| 42 | General steel double shutter door (G.I.) for wall opening 2000MM (Width)X2400MM (Height) approximately including supplying, providing and fixing of required hardware fittings and fixtures. etc. complete as per detailed technical specifications and as directed by Engineer in charge.Providing and fixing of Hollow metal doors (Single leaf /Double leaf) fully panelled and/or with partly louvered and/or vision panel as per site requirements. Doors shall confirm IS 3614 part-1 & part-2 for stability and integrity. Pressed Galvanized steel confirming to IS 277 with given specifications. Door frame shall be double rebate profile of size 143 x 57 mm made out of 1.60mm (16gauge) minimum thickness and shutter skin thickness of 1.20mm minimum thick galvanized steel sheet. Once frame installed should be grouted with cement & sand slurry necessary for fire doors on the clear masonry opening. All doors and frames shall be finished with polyurethane aliphatic grade paint of approved colour. Item also includes supplying, providing and fixing of required hardware fittings and fixtures. etc. complete as per Clause of technical specifications.and as directed by Engineer in charge. |
| 43 | General steel double shutter door (G.I.) for wall opening 1800MM (Width)X2200MM (Height) approximately including supplying, providing and fixing of required hardware fittings and fixtures. etc. complete as per detailed technical specifications and as directed by Engineer in charge.Providing and fixing of Hollow metal doors (Single leaf /Double leaf) fully panelled and/or with partly louvered and/or vision panel as per site requirements. Doors shall confirm IS 3614 part-1 & part-2 for stability and integrity. Pressed Galvanized steel confirming to IS 277 with given specifications. Door frame shall be double rebate profile of size 143 x 57 mm made out of 1.60mm (16gauge) minimum thickness and shutter skin thickness of 1.20mm minimum thick galvanized steel sheet. Once frame installed should be grouted with cement & sand slurry necessary for fire doors on the clear masonry opening. All doors and frames shall be finished with polyurethane aliphatic grade paint of approved colour. Item also includes supplying, providing and fixing of required hardware fittings and fixtures. etc. complete as per Clause of technical specifications.and as directed by Engineer in charge. |
| 44 | Airtight steel doorsDesign, Fabrication and Supplying Double shutter door with frame of size 3100 mm (Wide) X 2700mm(Height) air tight doors with suitable frame. Door frame shall be made of MS angle 50X50X6mm thick. and shall be welded to existing door m s frame. Door shutter (leaf) shall have grooves for rubber 25mm Square wide gaskets for sealing.; Door shutter shall be fabricated by using 16G g. i. sheet sandwiching 50 mm thick PUF insulation, suitable to with stand a pressure difference of 150mm WC across the doors. Sturdy S.S. hinges (shaft and barrel type), 25 mm thick neoprene rubber gasket all around the door having approved sure hardness, two pair brass handles with chromium coating for single shutter and having wedge shaped projection to turn against a roller for ensuring proper leak tightness or any other suitable arrangement as approved by EIC, viewing panel (double glass with gasket sealing), Handles at two places with locking arrangement; including all standard accessories, hardware, fasteners etc. to suit at site and as per the drawing approved by the Engineer-in-charge. Item includes fixing of door by using combination of various jobs like cutting, grinding, welding grouting, sealing etc. providing of supports as and whenever required to suit site; The complete doors to be painted by two coats of suitable epoxy primer after completion of fabrication and two coats of finish epoxy paint after installation. etc. complete as per detailed technical specifications and as directed by Engineer in charge. |
| 45 | Arc welding for fixing of ms door frame to existing ms angle and shall be measured in per inch length basis (including consumable, edge preparation, DP testing in root and final run) etc. complete as per detailed technical speicifications and as directed by Engineer in charge. |
| 46 | Dismantling of existing Air lock doors and fininshing of old ms door framesi). Dismantling of existing damaged door shutter by using combination of various jobs like cutting, grinding etc. providing of supports as and whenevere required to suit site or as directed by the Engineer-in-charge; ii) Old MS frames studs used for earlier door locking shall be removed by grinding and making a smooth surface for fixing new door frame over it; iii)Cuting old shutter into a pieces not more thn 600mm wide before dumpng to diisposal point etc. complete and stacking old shutter within 100 mts. lead. Note Job will be measure as pe each shutter work. Maximum width of shutter is upto 1600mm an d height is up to 2700mm |
| 47 | Wall hung metal storage unit with glass doorDesigning, supplying, and installation wall hung storage unit (store) a size upto 900 mm (Width) x 340 mm (Depth) x 635 mm of approved make.Detailed specifications are as given in technical specifications sheet seperately. |
| 48 | Providing and fixing of 50 mm thickness knockdown modular workstationsof size 1500mm (width 1) X 1500mm(width2)X 600mm (depth) etc. Detailed specifications are as given in technical specifications sheet seperately. |
| 49 | Providing and fixing of 50 mm thickness knockdown modular workstations of size 1200mm(width) X 600mm (depth) etc. Detailed specifications are as given in technical specifications sheet seperately. |
| 50 | Construction of Type-1 seating arrangement Providing and fixing medium back revolving seating arrangement with nylon undercarriage, fixed armrest handle and back of medium back mode etc complete as per specification and as directed by EIC. Detailed specifications are as given in technical specifications sheet seperately. |
| 51 | Construction of Type-2 seating arrangement Providing and fixing medium back visitor tubular frame chairs-cantilever type & made of 2.54 cm ɸ x 0.20 cm thick SS 202 tube, the back connected to frame through chrome plated high pressure die cast connector piece etc complete as per specification and as directed by EIC. Detailed specifications are as given in technical specifications sheet separately. |
| 52 | Construction of Type-3 seating arrangement Providing and fixing medium back visitor tubular frame chairs-cantilever type without armrest, the back connected to frame through chrome plated high pressure die cast connector piece etc complete as per specification and as directed by EIC. Detailed specifications are as given in technical specifications sheet separately. |
| 53 | Supply and installation of esensial office accessories like metal CPU trolley and keyboard trey. Detailed specifications are as given in technical specifications sheet seperately. |
| 54 | Sealing the Expansion JointsProviding, supplying and sealing the Expansion Joints with elastomeric Polyurethane sealant (PU) sealant suitable for RCC Construction Joints of approved make. A construction Chemicals make or approved equivalent by removing the expansion joint sealent and cleaning the suface neatly, placing the backer rod wherever required in case of displacement or non-existing and filling elastomeric Polyurethane sealant (PU) up to 25 mm deep to the lines and levels complete all as per manufacturers specifications and as directed by the project engineer.40 mm wide expansion Joints |
| 55 | Making holes RCC machine foundation for providing, supplying and fixing chemical anchor bolts in existing RCC foundation of blowers. Holes shall be of 30mm/32mm diameter up to a depth 300mm at the foundation keeping the bolts at the centre using Non – Vibrational core cutting Machine attached with Diamond Cutting core bits of all HILTI make as per technical specifications. |
| 56 | Providing, supplying and fixing chemical anchor bolts in existing RCC foundation of blowers using HILTI anchor M20 x 300 using injectable epoxy mortar for fixing of rebar connections and heavy-duty anchoring as per technical specifications |
| 57 | Providing and fixing false Ceiling 300 C Unperforated corrosion resistant Aluminium Magnesium alloy metal Panel system of approved colour consisting of Panel 300 mm wide x 12.50 mm deep x 0.50 mm thick with square edges and recess flange of 24mm, panel length up to 6.00 metres, coil coated on a continuous paint line. Double baked and roll formed from double baked enamelled corrosion resistant Aluminium Magnesium alloy AA 5050 for higher strength and good roll forming characteristics. Panel shall be clipped to abaked enamelled corrosion resistant Aluminium panel carrier of 62 mm wide x 29 mm deep x 0.95 mm thick in standard length of 5.00 metres made of double baked enamelled Aluminium Magnesium alloy AA 5050 black with cutouts to hold the panels modules of 100mm ( width of gap 16 mm closed) and at a distance of 1.60 metres with insulation and 1.80 metres with out insulation. The carrier shall be suspended by means of G.I. suspension rod of 4 mm diameter and Galvanised suspension spring clip at a distance of 1.30 metre c/c. Paint finish of Aluminium panels shall be chromotised for maximum bond between metal and paint enamelled twice under high temperature, one side with full primerand finish coat, the other side (Inner side) with a primer coating and skin coat on a continuous paint line |
| 58 | Designing, fabrication, supply, guaranteeing and installation of Retractabel type Awning using galvanized telescopic and/or framed hinge structure and architectural fabric of M/s Ferrari make or equivalent of approved shade, colour and pattern. Fabric shall be weather resistant, UV resistant, fire retardant for protecting the facility from sun and rain etc complete in general as required to suit site and as directed by Engineer-in-charge. |
| 59 | Raising of existing chambersRaising the height of existing Inspection Chambers/manhole chambers/rain water drain chambers/earthing pit of size upto 1000mm X 1500mm without damaging existing frame and cover upto new finishing floor level after dismantling existing plastering and brickwork and stacking of CI frame and cover undamaged and refixing same in 200 mm thick RCCof grade M30 to new floor finish including raisingwith required brickwork and plastering finishing of unfinished part as directed by engineer in charge. |
| 60 | Miscelleneous stainless steel work Design, supply, fabrication, testing & installation of 304 grade Stainless Steel work for bottom tray of cubical shower, drain pipes lines, tray gratingfor cubical shower and work table with storage etc of approved design,drawings and using special sections and quality by welding, mirror / matt polishing, buffing, fixing at site etc. as per given technical specifications and as directed ni Engineer in charge. This work to be executed through approved specialized agency. |
| 61 | HST STUD Type M-12 X 145 mm LongAnchor FastnersProviding and Fixing Anchor Fastner of approved make including drilling in concrete as per requirement for fixing Eps or other structures all as specified by the manufacturer complete all as per specifications and drawings. |
| 62 | Five Shelve Slotted Angle RackProviding mild steel free standing type racking system having 5 Shelve Slotted Angle Rack of 1200mm wide and 2400mm height and each ms sheet shelve having staroage capacity of 200 kG per shelve. Racking systems shall have customized option for height with nut bolt joints. Height between levels can be adjusted by a pitch of 38 mm.Surface of the slotted angle rack is powder coated with anti rust paint. Work inlcudes supplying, cutting, fabricating, fixing in position etc. complete all as per specifications, drawings and as directed by the Engineer in charge |
| 63 | Bath room fittingsProviding and fixing bath room fittings like Single Lever Diverter with Concealed Body Consisting of Operating Lever, Cartridge Sleeve, Wall Flange (with Seals), Button Assembly Sleeve & Button System alongwith Bathtub Spout with Button Attachment for Hand Shower and provision for both Hand Shower and overhead shower along with 600 mm long hose,200X200mm square shower head with shower arm for hand shower CP brass 95mm dia shower rose with Shower arm of Jaquar make as per specifications and as directed by Engineer-in-charge completeWall mixer Code: FLR-CHR-5281N- Florentine ; 600mm Long Braided Hose Cat No: ALD-CHR-801B; Overhead Shower 200X200mm square Shape Code: OHS-CHR-35497;Hand Shower ø95mm Round Shape Code: HSH-CHR-1737 |
| 64 | Storage type water heater/gyserSupply, installation, testing and commissioning of instant water heater of following details: a.Capacity: 25 Litre b.Power supply: 230 V , AC, 50 Hz, power supply cord shall be provided. c.Energy Efficiency class: 5 star as per BEE guideline d.PUF insulation for energy savings e.Thermal cutout f.Adjustable thermostat with automatic ON/OFF indication and variable setting oftemperature g.Mounting : Horizontal/Vertical as per site condition. The heater shall be installed and tested with all mounting accessories. Provision of power supply will be measured in separate item. Water line connection is not under the scope of the bidder. |
| 65 | Providing and fixing 6 mm thick mirrors of size 600 x 450 mm of approved make with bevelled edges complete with 6 mm thick asbestos sheet back ground fixed to walls with C.P. brass screws and concealed washers complete. all as per specifications and as directed by the Engineer-in-charge . |
| 66 | C.P. brass / copper inlet connectionProviding and fixing CP brass / copper inlet connection pipes heavy quality suitable for hot and cold including CP brass unions and nuts 15 mm dia 600 mm long |
| 67 | Concelaed Stop cockProviding and fixing 20 mm n.b CP brass concealed stop cock of approved make of Heavy Quality of specified / approved make as per specifications and as directed by the Engineer-in-charge |
| 68 | Angle cock Providing and fixing C.P brass Angle cock of heavy quality of specified / approved make, for wash basin inlet / flush cistern etc. as per specifications and as directed by the Engineer-in-charge Providing and Fixing 15 mm CP brass Angle stop cock of approved make- quarter Turn |
| 69 | Providing and fixing C.P brass bib cock of heavy quality of specified / approved make as per specifications and as directed by the Engineer-in-charge15 mm dia bib cock fancy variety quarter turn of approved type and make |
| 70 | C.P.brass pillar cock elbow operatedProviding and fixing Heavy Quality C.P Brass Pillar cock ELBOW operated of \\"Jaquar \\" make and type as per specifications and as directed by the Project Engineer (Samples to be got approved by the Project Engineer) |
| 71 | Stainless steel sinkProviding and fixing satin finish stainless steel AISI 304 (18/8) kitchen sink of size 610 x 510 mm without drain board and bowl size 685 x 535 x 250 mm depth as per IS13983 of approved make, with C.I. brackets, fittings and stainless steel plug 40 mm including painting the fittings and brackets with 3 coats of white enamel paint over a coat of primer, cutting and making good the walls wherever requried complete as per specifications and as directed by the Engineer-in-charge. |
| 72 | C.I. FRAME & COVERSupplying and fixing Cast Iron Man hole or Cast Iron Steps/ cover / CI Grating of approved make and weight as specified in the drawings or as directed by the Engineer in charge. |
| 73 | CPVC pipes for drainageProviding and fixing Chlorinated PVC (CPVC) pipes having thermal stability for hot & cold water supply (as ASTM Standard 2846 & SDR - 11 Grade) including all CPVC Plain & Brassthreaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with CPVC Solvent cement & testing the joints complete all as per specifications, drawings and as directed by the Project Engineer50 mm outer dia CPVC pipe (External/Concealed) |
| 74 | 25 mm n.b. Gate ValvesProviding & fixing in position heavy pattern screw down gun metal gate valve with handles and wheels of approved make including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge |
| 75 | 15mm n.b.Gate ValvesProviding & fixing in position heavy pattern screw down gun metal gate valve with handles and wheels of approved make including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge |
| 76 | 15 mm dia G.I pipe Exclusive TATA Make M.S.Galvanised pipesProviding , Laying , jointing, fixing and testing Heavy quality (C-Class) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing Teflon tape, exposed / concealed by chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint for all concealed lines / two coats of synthetic enamel paint for all exposed lines all as directed by the Engineer-in-charge. Pipes with exclusive use of TATA make C-Class pipes. |
| 77 | 25 mm n/b G.I pipe Exclusive TATA Make |
| 78 | CPVC Pipes 20 mm OD SDR 11 |
| 79 | CPVC Pipes 25 mm OD SDR 11 |
| 80 | Earth work excavationEarth work excavation by mechanical means (Hydraulic excavator) / manual means in all types of soil other than soft and hard rock, dressing the sides of foundation, ramming of bottom etc. including shoring and dewatering (if necessary) and refilling with selected excavated earth in layers of not more than 500 mm thick, each layer well rammed and consolidated including disposing the surplus earth within a distance of 200 m all as per specifications including clearing Jungle, uprooting of vegetation, grass, etc. complete and as directed by the Engineer-in-charge (a) From 0.00 to 1.50 m depth from Average Ground Level |
| 81 | Dismantling Bituminous roadDismantling Bituminous road including stacking of serviceable materails and disposal of unserviceable materials within 200 m lead |
| 82 | Dismantling plain cement concreteDismantling plain cement concrete manually / by mechanical means carefully without damaging adjacent structures including disposal of debris within 200 m lead as per direction of Engineer-in-charge |
| 83 | Demolishing Stone rubble masonry (In cement mortar) manually / by mechanical means carefully without damaging adjacent structures including stacking of serviceable materials and disposal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge |
| 84 | Demolishing C.C / R.C.C worksDemolishing C.C / R.C.C works by mechanical means and stock piling at designated locations carefully with out damaging adjacent structures and disposal of dismantled materials up to a lead of 100 m, stacking serviceable and unserviceable materials separately including cutting reinforcement bars all as directed at site. |
| 85 | Dismantling brick workDismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge |
| 86 | Dismantling doors, windows of Area beyond 3.00 Sq.M Dismantling doors, windows and clear storey openings (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows) Area beyond 3.00 Sq.M |
| 87 | Dismantling partition/False ceiling workDismantling Aluminium / Gypsum partitions, doors, windows, fixed glazing, cement asbestos, Celotax or other hard board ceiling or partiton walls at site including disposal of unserviceable surplaus material and stacking of serviceable materials within 100 m lead as directed by the Engineer-in-charge |
| 88 | Dismantling waterline pipes Dismantling G.I pipes/ PVC pipes of all diameter external work including excavation and refilling trenches after taking out pipes manually / by mechanical means including stacking of pipes within 100 m lead as per direction of Engineer-in-charge |
| 89 | Dismantling old plaster / skirtingDismantling old plaster / skirting carefully , raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100 m lead Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender