Tender For Day To Day Maintenance In Telephone Bhawan, All The Telephone Exchanges, Trc Club & Bsnl Staff Qtrs. Under The Jurisdiction Of Bsnl Civil Sub-Division,Telephone Bhawan, Patna (For One Year)
Tender Value
4.96 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
3 days left
EMD
9927
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patna → Bihar
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Day To Day Maintenance In Telephone Bhawan, All The Telephone Exchanges, Trc Club & Bsnl Staff Qtrs. Under The Jurisdiction Of Bsnl Civil Sub-Division,Telephone Bhawan, Patna (For One Year)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-Jul-2026 | corrigendumdate | Date | 14-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Trimming of grown up trees by cutting branches up to 3.00 metre from gound level including disposal to dumping ground etc. complete as directed by Engineer-In-Charge. |
| 2 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 3 | Cleaning of RCC water storage tank (inside surface) more than 2000 lits at all height with coco nut brushes,dusters etc removal of silt ,ec & mentioning thedate of cleaning as per direction of Engg-in-C.(in plot no 15-17,& plot-19) |
| 4 | Cleaning of RCC water storage tank (inside surface) more than 2000 lits at all height with coco nut brushes,dusters etc removal of silt ,ec & mentioning thedate of cleaning as per direction of Engg-in-C.(in Telephonebhawan,Patna) |
| 5 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. (a) With cement mortar 1:4 (1 cement : 4 fine sand). |
| 6 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: (a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 7 | Renewing glass panes and refixing existing wooden fillets: (a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 8 | Renewal of old putty of glass panes (length) . |
| 9 | Refixing old glass panes with putty and nails . |
| 10 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \\"S\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. (a) Long pattern W.C Pan of size 580x440 mm |
| 11 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : a) W.C. pan with ISI marked white solid plastic seat and lid |
| 12 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : a) One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 13 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: a) White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
| 14 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. A) 10 litre capacity - White |
| 15 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : a) White solid plastic seat with lid |
| 16 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. A) Flexible pipe (i) 32 mm dia |
| 17 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 18 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. A) Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
| 19 | b) Waste coupling 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms. |
| 20 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. A) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 21 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. a) 20 mm nominal outer dia .Pipes. |
| 22 | b) 25 mm nominal outer dia .Pipes. |
| 23 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall a) 20 mm nominal outer dia. Pipes. |
| 24 | b) 25 mm nominal outer dia .Pipes. |
| 25 | c) 32 mm nominal outer dia. Pipes. |
| 26 | d) 40 mm nominal outer dia. Pipes. |
| 27 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work a) 32 mm nominal outer dia. Pipes. |
| 28 | b) 40 mm nominal outer dia. Pipes. |
| 29 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. A) 15 mm dia. nominal bore |
| 30 | b) 20 mm dia. nominal bore |
| 31 | c) 25 mm dia. nominal bore |
| 32 | d) 32 mm dia. nominal bore |
| 33 | e) 40 mm dia. nominal bore |
| 34 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : a) 25 to 40 mm nominal bore |
| 35 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : a) 25 mm nominal bore |
| 36 | b) 20 mm nominal bore |
| 37 | c) 32 mm nominal bore. |
| 38 | d) 40 mm nominal bore |
| 39 | Providing and fixing uplasticised PVC connection pipe with brass unions : a) 15 mm nominal bore (i) 45 cm length |
| 40 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : a) 100 mm diameter |
| 41 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : a) 15 mm nominal bore. |
| 42 | b) 20 mm nominal bore. |
| 43 | c) 25 mm nominal bore. |
| 44 | d) 40 mm nominal bore. |
| 45 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 46 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: a) 15 mm nominal bore. |
| 47 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. A) 15 mm nominal bore. |
| 48 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.A) 15 mm nominal bore |
| 49 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. a) 15 mm nominal bore. |
| 50 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : a) 15mm nominal bore |
| 51 | Providing and fixing PTMT bib cock of approved quality and colour. A) 15 mm nominal bore, 122 mm long. Weighing not less than 99 gms. |
| 52 | Providing and fixing PTMT stop cock of approved quality and colour. A) 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 53 | Providing and fixing PTMT pillar cock of approved quality and colour .A) 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 54 | Providing and fixing PTMT grating of approved quality and colour. A) Circular type. (i) 100 mm nominal dia. |
| 55 | b) 125 mm nominal dia with 25 mm waste hole. |
| 56 | Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. |
| 57 | Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40 gms. |
| 58 | Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements. Weighing not less than 106 gms. |
| 59 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: a) 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 60 | Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5 mm (± 0.2 mm) made out of single piece extruded PVC profile, with mitred cut joints and joint with 2nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8x100mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge. |
| 61 | 25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer- in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places. |
| 62 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) a) 300x16 mm |
| 63 | b) 250x16 mm |
| 64 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) a) 200x10 mm |
| 65 | b) 150x10 mm |
| 66 | c) 100x10 mm |
| 67 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) a) 100 mm |
| 68 | b) 75 mm |
| 69 | Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete (Copper oxidised as per IS 1378)a) 115 mm |
| 70 | Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete (Copper oxidised as per IS 1378)a) 200 mm weighing not less than 240 grams |
| 71 | Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : a) 125x64x2.50 mm |
| 72 | Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 73 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 74 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : a) 250x16 mm |
| 75 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : a) 200x10 mm |
| 76 | b) 150x10 mm |
| 77 | c) 100x10 mm |
| 78 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : a) 100 mm |
| 79 | b) 75 mm |
| 80 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. A) Twin rubber stopper |
| 81 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. A) Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 82 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. A) 40 mm thick with 20 mm nominal size stone aggregate |
| 83 | Cleaning of Manhole chambers by manual labours & disposal of the wastes to the municipal dumping ground i/c necessary tools all complete as per the direction of Engineer in -charge.(in juridiction of civil sub-div TelephonebhawanPatna. |
| 84 | Cleaning of Septic Tank by mechanical means like cleaning tank of municipal & disposal of sludge & wastes etc to municipal storage & finally sweeping & cleaning the effected areas and spreading the lime around tank etc complete as per direction of E/I.(Tank capicity upto 100 users) |
| 85 | Weeding out vegetation/unwanted plants embedding from the walls & roofs at different locations varying height from 3.0mtr to 28 mtr from ground level ,pouring acid to prevent further growth (i/c cost of scaffolding) as per direction of Engg-in-C. |
| 86 | Arresting leakage through GI/CPVC pipe by cutting & dismantaling & fixing the same i/c providing & fixing G.I. Or CPVC fittings by threading & making long screws etc complete .(i/c cost of Scaffolding)a) 15mm N.B |
| 87 | b) 20mm N.B |
| 88 | c) 25mm N.B |
| 89 | d) 32mm N.B |
| 90 | e) 40mm N.B |
| 91 | Arresting leakage through PVC (R.W & sewerage pipe by cutting & dismantaling & fixing the same i/c providing & fixing PVC fittings by Cutting & making long screws etci/c Scaffolding , complete .A) 110 mm PVC pipe |
| 92 | Periodic cleaning of open drains i/c removal of garbage & disposal of the same to municipal dumping ground etc complete as directed by the Engg-in-C. |
| 93 | Providing & placing R.C.C cover(1:1.5:3) of 60 mm thick over Manhole chamber/drain by providing 8mm steel @ 250 c/c both way (cost of steel & placing ) included in the item as per direction of Engg-in-C. |
| 94 | Attending repairs to wooden or aluminium doors/window by removing & attending repairs i/c using necessary screws ,nails hinges required for smooth functioning as per direction of Engg-in-C.(Cost of hinges will be paid seperately). |
| 95 | Ceaning of terrace/spouts/khurras/canopy/blocked chajjas etc by removing leaves,grass,dust,rubbish & other deposited & accunlated materials etc,i/c disposal of rubbish to dumping ground up to 50 mtrvdistance. |
| 96 | Closing of main water supply lines of 15 mm to 40 mm as & when required i/c cost of jointing materials such as plugs,taps etc as per direction of Engg-in-C. |
| 97 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (a) Single socketed pipes. (a) 75 mm diameter |
| 98 | b) 110 mm diameter |
| 99 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. a) Single tee with door (i) 75x75x75 mm |
| 100 | (ii) 110x110x110 mm |
| 101 | b) Single tee without door (i) 75x75x75 mm |
| 102 | (ii) 110x110x110 mm |
| 103 | © Bend 87.5° (i) 75 mm bend |
| 104 | (ii) 110 mm bend |
| 105 | Providing and fixing M.S. pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. a) 75 mm |
| 106 | b) 110 mm |
| 107 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge. |
| 108 | P/F Covers for PVC water storge tanks with necessary MS/PVC clamps (a) For 500/1000 lits capacity tanks |
| 109 | P/F Single Scagffolding byproviding bamboo & coir string max height (G+7) as per direction of Engg-in-C. |
| 110 | P/F window fastner (left/Right) in steel window. |
| 111 | Repairing of the following i/c other fittings of CP brass etc as per direction of Engg-in-Charge a) Brass/C.P.brass-Bib cock,pillar cock,mixer taps etc by changing brass spandle etc complete. |
| 112 | b) Low level cistern (i)by replacing complete internal fittings/fixtures & ball cock complete as required. |
| 113 | Credit to following dismantalled materials as per direction of Engg-in-Chargea) M.S.sliding door bolt of any size |
| 114 | b) A.L.sliding door bolt of any size |
| 115 | c) M.S. tower bolt of any size |
| 116 | d) Al. tower bolt of any size |
| 117 | e) M.S.handle of any size |
| 118 | f) G.I.Pipe with fittings of any size |
| 119 | g) Gun metal gate valve up to 40 mm Size |
| 120 | Credit to following dismantalled materials as per direction of Engg-in-Chargea) C.P.brass Bib cock |
| 121 | b) C.P.brass long body Bib Cock |
| 122 | c) C.P.Brass stop cock |
| 123 | d) C.P.brass angle Valve |
| 124 | e) P.T.M.T Bib cock |
| 125 | f) P.T.M.T Stop cock |
| 126 | g) P.T.M.T Pillar cock |
| 127 | h) P.T.M.T Grating |
| 128 | i) P.T.M.T Ball cock |
| 129 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : a) Kitchen sink with drain board (i) 510x1040 mm bowl depth 250 mm. |
| 130 | Cleaning of Jungle,rubbish entire campus of plot no 19,Rd no-1A,at Gardanibagh,Patna as per direction of Engg-in-C. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 08, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 14, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender