Tender For Development Of Open Space At Salia Sahi, Bhubaneswar.
Tender Value
1.40 Crore
Estimated cost
Bid Submission
14 Jul 2026
10 days left
EMD
1.40 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Open Space At Salia Sahi, Bhubaneswar.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in all kinds of soil in excavation of foundation trenches with initial lead and lift including rough dressing in layers not exceeding 0.3 m in depth and the earth transported by transport vehicles including moorum, hard stony earth and earth mixed with boulders except sheet rocks and boulders requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with all leads and lifts, T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, designing including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. |
| 2 | Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 3 | Providing & laying P.C.C. of prop.(1:3:6) in F & P, fountain, pathway toe wall, fountain base, base of column using 40mm nominal size down graded, screend, washed hard black cursher broken granite metal of approved quality & from approved quarry including laying in the layers hoisting, lowering, laying, watering and curing etc. complete to the requaired levels including cost, conveyance, royalty of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge. |
| 4 | R.C.C. work of M-20 having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary as per direction of the Engineer-in-charge including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per direction of Engineer-in-charge (but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. |
| 5 | Coloumn F&P |
| 6 | Coloum in S/S |
| 7 | Coping/ Plinth Beam |
| 8 | Lintel |
| 9 | Roof beam |
| 10 | Chajja |
| 11 | Roof Slab |
| 12 | Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes as per DTCN for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance and taxes of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction of Engineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.) |
| 13 | Brick work with Fly Ash Brick( 25 x 12 x 8 cm) in cement mortar ( 1:6) with best quality bricks of size 25cm x 12cm x 8cm having minimum crushing strength from 75 Kg/cm2 wih dimension tolerance +2% (free from cracks, well shaped, uniform in size) includes molding, chamfering, corbelling complete as per drawing, design and specification, watering and curing for 7 days including cost, conveyance, royalty of all materials, labour, T&P etc. and as per direction of Engineer-in-charge. |
| 14 | Fly Ash Brick F&P |
| 15 | Providing 25mm thick grading concrete in (1:2:2) using cbhg chips RCC work finished smooth to proper line and plumb, watering, curing for 7 days with cost, conveyance, royalties, of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 16 | Providing 12mm thick cement plaster in cement mortar of proportion (1:6) over even surface of brick work after racking out the joints finished smooth to proper line and plumb, watering, curing for 7 days with cost, conveyance, royalties, of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge |
| 17 | Providing 16mm thick cement plaster in cement mortar of proportion (1:6) over even surface of brick work after racking out the joints finished smooth to proper line and plumb, watering, curing for 7 days with cost, conveyance, royalties, of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge |
| 18 | Providing 6mm thick cement plaster in cement mortar of proportion (1:4) over uneven surface of brick work finished smooth to proper line and plumb, watering, curing for 7 days with cost, conveyance, royalties, of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 19 | Providing 12mm thick cement plaster in cement mortar of proportion (1:4) with punning over uneven surface of brick work with neat cement punning finished smooth to proper line and plumb, watering, curing for 8 days with cost, conveyance, royalties, of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 20 | Providing 12mm thick cement plaster in cement mortar of proportion (1:4) over uneven surface of brick work with neat cement punning and bitumen painting finished smooth to proper line and plumb, watering, curing for 9 days with cost, conveyance, royalties, of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. |
| 21 | Providing & laying plain cement concrete of prop. (1:2:4) using 12mm to 20 mm nominal size downgraded, screened, washed hard black crusher broken granite chips of approved quality & from approved quarry, watering and curing etc. complete including cost, conveyance, royalty of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge. |
| 22 | Providing & applying Two coat plastic paint over a coat of priming of approved make and shade an even finished surface over a coat of primer at all height with all scaffolding and staging charges including cost, conveyance of all materials and cost of all labour, sundries and T&P etc. required for the work complete as directed by the Engineer in charge. |
| 23 | Providing & applying Two coat weather shield paint (Outside) paint of approved make and shade an even finished surface over a coat of primer at all height with all scaffolding and staging charges including cost, conveyance of all materials and cost of all labour, sundries and T&P etc. required for the work complete as directed by the Engineer in charge. |
| 24 | Fabricating and supplying of M.S. grill made out of M.S. square bar / M.S. flats / M.S. angles as per approved drawing and design, cutting to required size and welding properly, finished smooth and sand papering, painting one coat with red oxide primer, including cost, conveyance of all materials, required screws, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge in all floors. |
| 25 | Labour for fitting and fixing of M.S. by using C.C. (1:2:4) etc. as required for the work and direction of Engineer in charge. |
| 26 | Providing & applying Two coat enamel paint (Outside) paint of approved make and shade over a coat of primer at all height with all scaffolding and staging charges including cost, conveyance of all materials and cost of all labour, sundries and T&P etc. required for the work complete as directed by the Engineer in charge. |
| 27 | Filling foundation trenches and plinth with excavated earth/materials including laying the earth in layers, ramming and watering well with initial leads and lifts T&P etc. complete as directed by the Engineer-in-charge. |
| 28 | Construction of subgrade and earthen shoulders with approved materials obtained from borrow pits with all leads and lifts transporting to site,spreading, grading to required slope and compacting at OMC by Vibratory Roller to meet the requirement of Table-300.2 and Clause 408 of MoRT&H Specifications for Road & Bridge works (5th Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge. |
| 29 | Manufacturing, supplyiing and installation of M-25 grade pre-cast Kerb Stone of size 400 x 300 x 150mm as per approved drawing and design etc. all complete as required for the work and direction of Engineer in charge. |
| 30 | Providing and laying 60mm thick of M-30 grade inter locking paver blocks of approved shade, design having minimum compressive strength 40 N/mm² over a layer compacted sand laid over sub base and compacted with vibrator including cost, conveyance, royalty of all materials complete and as per direction of Engineer-in-charge. |
| 31 | Carriage of surplus earth by mechanical means within 5km lead excluding loading including loading etc complete including cost, conveyance, royalty of all materials complete and as per direction of Engineer-in-charge. |
| 32 | Supply, fitting and fixing of Vitrified Tiles in floors treades or steps and landing over 25mm thick bed of C.M. 1:1 (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades on the tiles etc. complete including cost of all materials, labour etc. all complete as required for the work and direction of Engineer-in-charge. |
| 33 | Supply, fitting and fixing of ceramic glazed Wall Tiles in dados skirting and risers of setp over 12mm thick bed of C.M. 1:3 (1 cement : 3 sand) jointed with neat cement slurry mixed with pigment to match the shades on the tiles etc. complete including cost of all materials, labour etc. all complete as required for the work and direction of Engineer-in-charge. |
| 34 | Construction of Granular Sub-base by providing coarse graded Material grade IV, spreading in uniform layers on prepared surface,mixing by place in method rotavator at OMC, and compacting with vibratory power roller to achieve the desired density, complete as per clause 501 and spreading the same with motor grader of adequate capacity with hydraulic controlled blades & compacting the same with vibratory roller of minimum 80 to 100KN static weight or of equivalent capacity, to achieve minimum required density of technical specification for Road & Bridge works MORT&H (5th revision) including cost and conveyance of all materials, labour, T&P, royalty and taxes etc. as required for the work complete as per direction of Engineer-in-charge. |
| 35 | Providing, fitting and fixing UPVC Door with frame as per drawing confirming to IS specification with necessary fittings, fixtures and hardwares like concealed locks , aluminium handles, etc. and fixed to the walls or columns with lugs in cement concrete 1:2:4 cutting holes and mending good to all damages, including filling gaps if any, between the frames walls / columns, with appropriate sealant, including cost of all materials, labour, conveyance, royalties, scaffolding, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge. |
| 36 | Providing, fitting and fixing UPVC sliding windows as per drawing confirming to IS specification with necessary fittings, fixtures and hardwares like concealed locks , aluminium handles, etc. and fixed to the walls or columns with lugs in cement concrete 1:2:4 cutting holes and mending good to all damages, including filling gaps if any, between the frames walls / columns, with appropriate sealant, including cost of all materials, labour, conveyance, royalties, scaffolding, sundries, tools and plants, etc., complete as per the direction of the Engineer-in-charge. |
| 37 | Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trapconforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium platedscrews including jointing the trap with soil pipe incement mortar (1:1) etc all complete as perscrewsspecification. (Seat and cover to be measured and paid for separately) |
| 38 | Fixing plastic seat and cover for wash down water closet with chromium plated brass hingesand rubber buffers all complete as per specification. |
| 39 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) confirming to IS :7231 with all fitting to IS:7231 with all complete. Hindware make |
| 40 | Fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks andsupply mains for wash basin complete as per specification |
| 41 | Supplying fitting and Fixing of 15mm dia CP angular stop cock with all complete . |
| 42 | Supplying fitting and Fixing of 15mm dia CP Conceal stop cock with all complete . |
| 43 | Supplying fitting and Fixing of 15mm dia CP pillar cock with all complete . |
| 44 | Fixing wash basins with hole for pillar taps conforming to IS 2556 : Part 4-2004 with CastIron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specificationVitreous china wash basin 550x400 mm Of Hindware make. |
| 45 | Fixing PVC waste pipe of following nominal diameter for wash basin or sink including brass checknut complete as per specification ( 32mm dia ) |
| 46 | Fixing Chromium Plated brass waste of the following nominal diameter for wash basin and sinkas per specification (32mm diameter ) |
| 47 | Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.Csheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws andwashers complete as per specification.600mm x 450mm bevelled edge mirror |
| 48 | Fixing standard sized glass-shelf with Chromium Plated brass brackets and guard railscomplete, fixed to woden plugs with Chromium Plated brass screws as per specification Fixing of Glass Shelf. |
| 49 | Fixing standard sized Chromium Plated brass towel rail complete with Chromium Platedbrass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as perChromium Plated brass towel rail |
| 50 | Fixing standard sized Chromium Plated brass towel ring fixed to wooden plugs with ChromiumPlated brass screws, complete as per specification.Chromium Plated brass towel ring |
| 51 | CP soap holder |
| 52 | 1500 litre capacity Double Layer Cylinderical Vertical water storage tanksOn the roof of ground floorDetails of cost for one Tank of approved make & qualty including cost of all labour & material with all taxes etc complete as per direction of Engineer in Charge |
| 53 | Supplying fitting & fixing following PH fitting & Fixture of approved make & qualty including cost of all labour & material with all taxes etc complete as per direction of Engineer in Charge |
| 54 | Wash basin to soak pit 110mm dia |
| 55 | connecting from existing w/s line to overhead tank |
| 56 | 50mm dia loading main |
| 57 | Cutting holes through the brick or laterite masonry wall for taking Sand Cast Iron(SCI) /centrifugally cast (spun) iron pipes and mending good the damages. |
| 58 | 250mm to 375mm thick wall |
| 59 | Cuutting grouves in wall celling for taking cpvc pipes |
| 60 | Supplying fitting & fixing following PH fitting & Fixture of approved make & qualty including cost of all labour & material with all taxes etc complete as per direction of Engineer in Charge |
| 61 | 2 in 1 CP Bib cock with all fitting etc all complete |
| 62 | CP Health fucet with 1 m pvc tube |
| 63 | CP Grating |
| 64 | PVC Ballcock 50mm |
| 65 | Tank Nipple of Prayag make |
| 66 | 2\\" Ball valve |
| 67 | 2\\"x2\\"x1/2\\" Reducing Tee |
| 68 | 110mm Door bend 90deg. |
| 69 | 110mm Door bend 45deg. |
| 70 | 110mm vent cowl |
| 71 | Door Tee |
| 72 | for vent pipe |
| 73 | from toilet to Septic tank |
| 74 | Supplying all materials, labour and T&P and constructing Fly Ash Septic Tank of size 1200mm x 900mm x 900mm with 150mm thick RCC slab with SFRC MH cover with 150mm thick R.C.C. top slab in (1:1½:3) mix with foundation lean concrete (1:4:8) inside plaster 12mm. thick with cement mortar (1:3) finished with neat cement punning, RCC in (1:1½:3) mix in wall and base including rigid and smooth centring and shuttering, cost of reinforcement as per specification including benching and chanelling complete including earth work in excavation and refilling the cavity with disposal of surplus earth beyond the site. |
| 75 | Supplying all materials, labour and T&P and constructing Fly Ash soak way pit of size 1200mm x 900mm x 900mm with 150mm thick RCC slab with SFRC MH cover with 150mm thick R.C.C. top slab in (1:1½:3) mix with foundation lean concrete (1:4:8) including rigid and smooth centring and shuttering, cost of reinforcement as per specification including benching and chanelling complete including earth work in excavation and refilling the cavity with disposal of surplus earth beyond the site. |
| 76 | Construction of .45x.45x.45 Gully trap chamber with all complete wuth Supplying all materials, labour and T&P and constructing Fly Ash with 150mm thick RCC slab with SFRC MH cover with 150mm thick R.C.C. top slab in (1:1½:3) mix with foundation lean concrete (1:4:8) inside plaster 12mm. thick with cement mortar (1:3) finished with neat cement punning, RCC in (1:1½:3) mix in wall and base including rigid and smooth centring and shuttering, cost of reinforcement as per specification including benching and chanelling complete including earth work in excavation and refilling the cavity with disposal of surplus earth beyond the site. |
| 77 | Construction of .75x.75x.75 Inispection chamber with all complete as per standard specification as per design and as per direction of engineer in charge |
| 78 | Supply fitting fixing of standing urinal etc all complete. |
| 79 | supply fitting fixing of P Trap etc all complete. |
| 80 | supply fitting fixing of Floor Trap etc all complete. |
| 81 | Supply, Fitting & Fixing of following Children Play equipments as per Manufacturer specification of approved make and quality and direction of Engineer in Charge |
| 82 | TWO SEATED SEA-SAW |
| 83 | MERRY-GO-ROUND |
| 84 | TWO SEATED ARCH SWING |
| 85 | Supply, Fitting & Fixing of following Open GYm equipments as per Manufacturer specification of approved make and quality and direction of Engineer in Charge |
| 86 | Air walker |
| 87 | ABB Cruch or sit up bench |
| 88 | Air swing |
| 89 | Twister |
| 90 | Push n pull up Chair |
| 91 | Knee/Hip raise on parallel bars |
| 92 | Big shoulder wheel |
| 93 | Spinner |
| 94 | Bench with fixed Weight lift |
| 95 | Poles with fixed Weight lift |
| 96 | Labor for drilling a perfectly vertical 200x150mm dia bore hole |
| 97 | Lowering the following size P.V.C / G.I / M S ipes |
| 98 | Lowering of 200 mm dia PVC pipe ( Sch-80) |
| 99 | cost of 200 mm dia UPVC pipe ( Sch-80) |
| 100 | cleaning & developing of bore well |
| 101 | WATER SUPPLY (For pipe line) |
| 102 | 50 mm UPVC pipe(sch -80) |
| 103 | 25 mm UPVC pipe(sch -80) |
| 104 | PVC Ball Valve |
| 105 | 50 mm dia ball valve |
| 106 | 20mm dia ball Valve |
| 107 | Supplying installation of 5 HP submerssible pump set |
| 108 | 5 Hp Pomp Set |
| 109 | DOL starter for pump |
| 110 | 50 mm dia HDPE pipe ( 10 kg/ cm² ) |
| 111 | 2.5 sq mm 3 core copper flat submersible cable |
| 112 | Poly propelene rope |
| 113 | M S Holding split clamp |
| 114 | S S nipple |
| 115 | S S bolts and nuts |
| 116 | bore cover for 200 mm dia pipe |
| 117 | 40 mm G I socket |
| 118 | 40 mm G I bend |
| 119 | 40 x40x15mm G I Tee |
| 120 | 40 mm G I short piece |
| 121 | 50x40 mm G I R S |
| 122 | 40 mm G I union |
| 123 | 50 mm G I union |
| 124 | 50 mm PVC pipe ( sch-80) |
| 125 | labor charges for assembling and lowering of the pump set including testing.. |
| 126 | Electrical Works: -Supply & fixing of 40Watt decorative post top fitting. |
| 127 | Supply and Fixing of decorative 3Mtr light post top pole with 1 no 10Amp DP MCB. |
| 128 | Providing and laying C.C (M-30) using 20mm size down graded crusher broken hard granite chips including the cost of centring and shuttering with cost of all labour, materials.T & P and taxes, royality etc complete in all respect as per the direction of Engineer-in-charge. |
| 129 | Supply & fixing of single arm post top lantern with pole for parking area. |
| 130 | Supply of 9 Mtr long internally and externally Hot Dip Galvanized Octagonal pole made up of top dia 90 mm & bott om dia 190 mm and 3 mm thick HT Steel sheet conforming to grade S355JO, E350 with weather proof and vandal resistant pole. Base Plate Size 300X300X20 mm thick shall be welded (Inside & outside) with pole shaft , 4 Nos M24X850mm long J Bolt along with Temp plate, 3 Nos Nut & washer, including inbuild JB, containing (SP MCB, Terminal Stud, Backlite Sheet, SS hardwire Etc) |
| 131 | Supply of 48.4MM OD HDG ROUND Arm (1 MtrLong) for Triple arm bracket suitable for carrying different wattage Street light for Octagonal pole. |
| 132 | Supply of 60W All in One Solar Street light. |
| 133 | Constructing RCC Foundation for errection of the above pole. |
| 134 | Supply and fixing of Coil earthing. |
| 135 | Supplying, Installation and Commissioning of energy saving LED 120 watt street light with IP-66. |
| 136 | Supply and fixing of outdoor type step light. |
| 137 | Recessed/surface wiring to light point/fan point/ Exhaust fan point with 1.5 Square mm FR PVC insulated single core multistranded copper conductor of ISI marked with 20mm dia. non-metallic PVC flexible conduit with 5 Amp, 25 on MS box having front bakelite cover of suitable size, MS box with 1.5 Sq.mm FR PVC insulated single core multistranded copper conductor as earth wire including all accessories and connection as per direction of Engineer-in-charge. |
| 138 | Light point. |
| 139 | Fan Point |
| 140 | Supply and fixing of Exhaust Fan. |
| 141 | Supply and fixing of 6Amp Plug Point. |
| 142 | Supply and fixing of 20Watt LED Tube light. |
| 143 | Supply & fixing of lawn mower point. |
| 144 | Supply & fixing of 4 Way SPN DB with 1 no 20Amp DP MCB and 2 nos 6Amp SP MCB. |
| 145 | Supply and laying of 2x6mm2 Al.Ar. U.G cable. |
| 146 | Supply and laying of 4x16mm2 Al.Ar. U.G cable. |
| 147 | Supply and Laying of 40mm HDPE pipe for laying of Cable. |
| 148 | Cable trenching in all type of soil excepting rocky soil including excavation of earth, brick laying and filling of sand and loose earth to the original ground level with surface dressing after laying 1no 1.1 KVPVC insulated PVC sheathed armoured cable removal of surplus earth to a lead up to 5km. |
| 149 | S/F of Outdoor type double door plinth mounted panel board made out of 2mm thick CR sheet duly acid treated for de-rusting, primered and powder coated with approved enamel paint having hinged door with provision for cable entry duly factory wired and locking arrangement etc. complete with following provisions.Incoming:-1. 63Amp 25KA 4P MCCB-1 NoOutgoing:-1.40Amp TPN MCCB-01 No. 2.32Amp DP MCB-2 Nos.3.200Amp copper bus bar.4. 0-100Amp Ammeter with selector switch-1Set 5. 0-500Volt Voltmeter with selector-1Set6. Indicator lamp-1Set. 7.Time switch with contactor complete set Size of panel board 36\\"x 24\\"x10\\" |
| 150 | Supply and fixing of Standard earthing. |
| 151 | Horticultural Works: - (Land Development)Supplying and staking of Farm yard Manure (cowdung based) from approved source carriage upto 5 km lead complete(Manure measured in stacks will be reduced by 8% for payment), trench to be filled with soil & FYM in 1:9, reqt of FYM |
| 152 | Screened the FYM through sieve of I.S. designation 20 mm |
| 153 | Supplying and staking of garden soil/good earth at site including royality and carriage upto 10 km lead complete(earth measured in stacks will be reduced by 20% for payment),cost for1cum |
| 154 | Mixing earth and FYM in the required proportion specified or directed by Horticulture officer incharge |
| 155 | Spreading of Sieved FYM & soil in required thickness as per direction of Horticulture officer-in-charge(cost of FYM,good earth to be paid separately |
| 156 | Turf Development: -Providing and fixing of Selection no-1 grass at the site with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required toolswooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and even, watering with sprinkler as per direction of H.O. Incharge |
| 157 | Weeding out of lawn by removal of all weeds and other wild growth with roots by forking including disposal of garden rubbish with all loads and lifts complete if top dressing required paid separately(Cost of FYM or extra good earth to be paid separately) as per direction and satisfaction of officer incharge. |
| 158 | Fertilizer |
| 159 | MOP Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender