Tender For Construction Of Kayan Mandap At Bhandarikuda In Raibidhar Gp.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Jul 2026
6 days left
EMD
39411
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Puri → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Kayan Mandap At Bhandarikuda In Raibidhar Gp.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation in hard soil including dressing and levelling the bed up to the required depth & removing the excavated earth & depositing the same away from the work site within intial lead of 50 mtr & intial lift of 1.5 mtr, including cost of labour T&P articles required for the work including shoring ,shuttering ,propping & dewatering if required ,etc.complete in all respect as per the specification & direction of the Engineer-in-charge |
| 2 | Supplying and fitting in foundation trenches and plinth with sand ,well watered and rammed in layers not exceeding 23cm in depth with all lead and lift including cost, conveyence, loading , uploading , royalities and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complite in all respect as directed by the Engineer-in-charge |
| 3 | Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors (i.e. below the base course of flooring) using with 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for motar of approved quality and from approved quarry, washed and cleaned, including, hosting, lowering, laying concrete, rammiing, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including ,cost, conveyence, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P required for the work including, shoring, shuttering and dewatering if required including, hire & running charges of all machineries required for the work etc complete as per the direction of the Engineer-in-charge. |
| 4 | First class fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. per Sqr. Cm. in cement motar of mix (1:6) with screened & washed sand for motar after immersing the bricks for 6 (six) hours in water before use in F&P including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyence, loading unloading, royalities and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in -chage. |
| 5 | First class fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. per Sqr. Cm. in cement motar of mix (1:6) with screened & washed sand for motar after immersing the bricks for 6 (six) hours in water before use in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyence, loading unloading, royalities and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in -chage. |
| 6 | First class fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. per Sqr. Cm. in cement motar of mix (1:4) with screened & washed sand for motar after immersing the bricks for 6 (six) hours in water before use in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyence, loading unloading, royalities and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in -chage. |
| 7 | R.C.C. work M-20 grade as per approved designs and drawings having a minimum compressive stength (in work test) 20 N./Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black and hard crusher broken granite stone chips and screened and washed sharp sand for motar of approved quality from approved quarry, washed and cleaned (20 mm. size chips not to exceed 25 %) to be mixed in concrete mixture including hosting, lowiring, laying and compacting concrete by using vibrators, watering and curing for 28 days , centring and shuttering and finishing the exposed surface smoth providing grooves or beds wherever necessory including cost , conveyence ,loading, uploading, royalites and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete in all respect but excluding cost and conveyence of M.S. rods or Tor steel and binding wires and labour chages for straightening, cutting, bending etc.of M.S. rods or Tor steel tying the grills in proper etc. complete.(Column Base) |
| 8 | R.C.C. work M-20 grade as per approved designs and drawings having a minimum compressive stength (in work test) 20 N./Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black and hard crusher broken granite stone chips and screened and washed sharp sand for motar of approved quality from approved quarry, washed and cleaned (20 mm. size chips not to exceed 25 %) to be mixed in concrete mixture including hosting, lowiring, laying and compacting concrete by using vibrators, watering and curing for 28 days , centring and shuttering and finishing the exposed surface smoth providing grooves or beds wherever necessory including cost , conveyence ,loading, uploading, royalites and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete in all respect but excluding cost and conveyence of M.S. rods or Tor steel and binding wires and labour chages for straightening, cutting, bending etc.of M.S. rods or Tor steel tying the grills in proper etc. complete.(Plinth Beam) |
| 9 | R.C.C. work M-20 grade as per approved designs and drawings having a minimum compressive stength (in work test) 20 N./Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black and hard crusher broken granite stone chips and screened and washed sharp sand for motar of approved quality from approved quarry, washed and cleaned (20 mm. size chips not to exceed 25 %) to be mixed in concrete mixture including hosting, lowiring, laying and compacting concrete by using vibrators, watering and curing for 28 days , centring and shuttering and finishing the exposed surface smoth providing grooves or beds wherever necessory including cost , conveyence ,loading, uploading, royalites and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete in all respect but excluding cost and conveyence of M.S. rods or Tor steel and binding wires and labour chages for straightening, cutting, bending etc.of M.S. rods or Tor steel tying the grills in proper etc. complete.(Column & Beam) |
| 10 | R.C.C. work M-20 grade as per approved designs and drawings having a minimum compressive stength (in work test) 20 N./Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black and hard crusher broken granite stone chips and screened and washed sharp sand for motar of approved quality from approved quarry, washed and cleaned (20 mm. size chips not to exceed 25 %) to be mixed in concrete mixture including hosting, lowiring, laying and compacting concrete by using vibrators, watering and curing for 28 days , centring and shuttering and finishing the exposed surface smoth providing grooves or beds wherever necessory including cost , conveyence ,loading, uploading, royalites and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete in all respect but excluding cost and conveyence of M.S. rods or Tor steel and binding wires and labour chages for straightening, cutting, bending etc.of M.S. rods or Tor steel tying the grills in proper etc. complete.(Stair case exluding landing) |
| 11 | R.C.C. work M-20 grade as per approved designs and drawings having a minimum compressive stength (in work test) 20 N./Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black and hard crusher broken granite stone chips and screened and washed sharp sand for motar of approved quality from approved quarry, washed and cleaned (20 mm. size chips not to exceed 25 %) to be mixed in concrete mixture including hosting, lowiring, laying and compacting concrete by using vibrators, watering and curing for 28 days , centring and shuttering and finishing the exposed surface smoth providing grooves or beds wherever necessory including cost , conveyence ,loading, uploading, royalites and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete in all respect but excluding cost and conveyence of M.S. rods or Tor steel and binding wires and labour chages for straightening, cutting, bending etc.of M.S. rods or Tor steel tying the grills in proper etc. complete.(Lintel) |
| 12 | R.C.C. work M-20 grade as per approved designs and drawings having a minimum compressive stength (in work test) 20 N./Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black and hard crusher broken granite stone chips and screened and washed sharp sand for motar of approved quality from approved quarry, washed and cleaned (20 mm. size chips not to exceed 25 %) to be mixed in concrete mixture including hosting, lowiring, laying and compacting concrete by using vibrators, watering and curing for 28 days , centring and shuttering and finishing the exposed surface smoth providing grooves or beds wherever necessory including cost , conveyence ,loading, uploading, royalites and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete in all respect but excluding cost and conveyence of M.S. rods or Tor steel and binding wires and labour chages for straightening, cutting, bending etc.of M.S. rods or Tor steel tying the grills in proper etc. complete.(Slab,Chajja,Landing) |
| 13 | Cutting, staightening coiled or bent up M.S. rods, HYSD steel or Tor steel welding or jointing if necessory, bending, binding, tying the grills as required for RCC works, and hosting, lowering and placing in proper position according to approved designs and drawings including cost. conveyence ,loading ,unloading, taxes of M.S. rods , HYSD steel or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P and scaffolding complete in all respect as directed by the Engineer-in-charge (payment will be made according to the actual weight of M.S. rod, HYSD steel or Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost). etc. complete. |
| 14 | 20mm thick grading plaster in CM (1:4) etc complete as per direction of Engg. In- charge. |
| 15 | 6mm thick C.P(1:4) over RCC works including closed deep chipping with slurry treatment finished with all cost complete as per direction of Engg.in-charge |
| 16 | 12 mm cement plaster in cement mortor (1:6) including necessary scaffolding curing etc complete as per direction of Engg.in-charge |
| 17 | 16 mm cement plaster in cement mortor (1:6) including necessary scaffolding curing etc complete as per direction of Engg.in-charge |
| 18 | Fitting and fixing M.S grill for window including fitting in proper position etcas per direction of Engg.in-charge : |
| 19 | Supplying fitting and Fixing Vitrified tiles in floor of approved make conforming to IS : 13755 laid on 20mm thick bed of cement motar 1:4 jointed with neat cement slury and filling joint with white as per direction of Enginner - In - Charge cement including cost of all labour and material etc complete |
| 20 | Fixing Vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mmx600mm plain (Ivory) in dados skirting and risers of steps on 12mm thick cement plaster (1:3)) : Fixing Vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mmx600mm plain (Ivory) in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the Vitrified tiles including rubbing and polishing complete including cost of precast tiles. |
| 21 | Fixing ceramic Tiles (30cmx30cm / 40cmx40cm special plain/printed series ceramic floor tiles of premium grade having thickness 7mm to 8mm confirming to IS 13755) in floor , treads or steps and landing on a 25mm thick bed of cement mortar 1:1 (1cement: 1sand) jointed with neat cement slurry mixed with pigment to match the shades of the ceramic tiles including rubbing and polishing, cost of precast tiles complete as per direction of Enginer-in-charge. |
| 22 | Fixing ceramic tiles (20cmx30cm / 20cmx20cm special plain/printed series ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753) in wall cladding on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the ceramic tiles including rubbing and polishing, cost of precast tiles complete as per direction of Engineer-in-charge. |
| 23 | Fixing Chequred Tiles in floor , treads or steps and landing on a 25mm thick bed of cement mortar 1:1 (1cement: 1sand) jointed with neat cement slurry mixed with pigment to match the shades of the Chequred tiles including rubbing and polishing, cost of precast tiles complete as per direction of Enginer-in-charge. |
| 24 | Supplying, fitting, fixing up window (sliding type) made up aluminum Section 9778,as windows frame, section No. 4095,4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-incharge. |
| 25 | Providing fitting, fixing of Al. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No.1855 including all cost of labour,T&P , hire charges of drilling machine, labour charges etc. complete. and as per direction of Engineer in Charge |
| 26 | Wall painting 2 coats with weather paint of approved shade on wall surface over a coat of water bound wall cement primer to give an even shade including cost of brushes and putty including cost of paint scrapping as per direction of Engg.in-charge : |
| 27 | Wall painting two(2) coats with Plastc emulsion paints of approved shed on new work to give an evenshade including cost of platic emulsion paint etc complete with all cost: |
| 28 | Painting two coats with any aproved paint over one coat of primer on new steel works complete with all cost:asper direction of Engg.in-charge : |
| 29 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in staircase as per approved design and specification, buffing, polishing etc with cost,conveyance, taxes of all materials, labour,T&P etc. required for the complete in all respect. and as per direction of Engineer in Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender