Tender For Re-Routing Ht Line Of Chavara Feeder From Chithiravilaswam To Thadathilmukku 4 Pole Using cement concrete 1 Km Under Electrical Section, Mynagapally.
Tender Value
7.59 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
12 days left
EMD
19000
Bank guarantee accepted
Document Fee
1888
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kollam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Re-Routing Ht Line Of Chavara Feeder From Chithiravilaswam To Thadathilmukku 4 Pole Using cement concrete 1 Km Under Electrical Section, Mynagapally.
BOQ
| Sl. No. | Item Description |
| 1 | LABOUR |
| 2 | (112) Fitting and erecting one HT PSC SinglePole in position, including fitting crossarm, digging and back filling pit in ordinary soil (as per standards), drawing sufficient length of GI earthing leads from F clamp through V cross arm to theground for earthing (excluding provision of earthing). |
| 3 | (702) Labour charges for loading HT PSC pole from the stacking place and unloading the same at work site (transportation byany vehicle). |
| 4 | (167) Fitting one set AB switch on existingDP, giving connection and drawing sufficient length of GI earthing leads to the ground for earthing, excludingprovision of earthing. |
| 5 | (517) Dismantling (without damage) one AB switch from existing structure and bringing back to section store. |
| 6 | (554) Dismantling (without damage) one LTPSC/RCC pole after disconnecting stays,strut etc. attached thereon and stackingthe same. |
| 7 | (559) Dismantling (without damage) one LTPSC/RCC Strut pole including removalof clamps and stacking. |
| 8 | (116) Fitting and erecting one HT Double PoleStructure using PSC pole in position including fitting 2 channel cross arms,digging and back filling pit in ordinary soil, drawing sufficient length of GI earthing leads through all cross arms to the ground for earthing (excluding provision of earthing). |
| 9 | (170) Fitting one Additional 75x40mm, 1.8mChannel cross arm in existing single poleincluding conveyance of materials. |
| 10 | (119) Fitting and providing one HT Stay for 11kV pole, including digging and backfilling pit in ordinary soil. |
| 11 | (127) Additional rate for excavation of one Pitfor HT Pole/HT Stay in Laterite. |
| 12 | (120) Fitting and providing one Strut using HTPSC pole including digging and backfilling pit in ordinary soil. |
| 13 | (726) Transporting poles by hired vehicle to adistance upto 5km and carrying upto 4numbers of poles excluding loading&unloading charges. |
| 14 | (122) Fitting and providing one HT Fly stayfor 11kV pole using HT PSC pole including digging and back filling pits in ordinary soil, drawing sufficient length of GI earth leads to the ground for earthing (excluding provision ofearthing). |
| 15 | (169) Fitting one Additional V cross arm inexisting single pole including conveyance of materials. |
| 16 | (185) Fitting one Additional 2.4m Channelcross arm in existing single poleincluding conveyance of materials. |
| 17 | (324) Additional rate for refitting/redoing oneDisc set while renewing any type of11kV cut pole. |
| 18 | (405) Additional rate for refitting/redoing oneShackle Set, including reshacling onespan, while renewing any type of LTpole. |
| 19 | (419) Transferring LT single phase 2/3 wireOH line to newly erected HT/LT poleincluding dismantling existing cross armand insulators, refitting the same on thenew pole, binding etc. complete. |
| 20 | (420) Transferring LT three phase 4/5 wire OH line to newly erected HT/LT pole including dismantling existing cross arm and insulators, refitting the same on the new pole, binding etc. complete. |
| 21 | (113) Fitting and erecting one HT A typeSingle Pole in position, including fittingcross arm, digging and back filling pit inordinary soil (as per standards), drawingsufficient length of GI earthing leadsfrom F clamp through V cross arm to theground for earthing (excluding provisionof earthing). |
| 22 | (504) Dismantling (without damage) one 11kVPSC/RCC pole after disconnecting stays,strut etc. attached thereon and stacking the same. |
| 23 | (703) Labour charges for loading HT A typepole from the stacking place and unloading the same at work site (transportation by any vehicle). |
| 24 | (157) Providing one Earth using GI earth pipeof size 38.1mm dia, 2.5m length including digging separate pit (0.45x0.45x2.5m) at a minimum distance of 1.5m away from thepole/structure and maintaining standarddistance between different earth pipes inordinary soil & backfilling. |
| 25 | (163) Providing one Coil Earth using No.8 GI-earth wire (50mm dia, 115 turns) including digging separate pit (0.45x0.45x1.5m) at standard distance away from the pole/structure in ordinary soil & backfilling. |
| 26 | (451) Disconnecting and lowering down thesingle phase WP service connection withguy wire from the OH line andreconnecting the same after completingthe line work. |
| 27 | (452) Disconnecting and lowering down thethree phase WP service connection withguy wire from the OH line and reconnecting the same after completing the line work. |
| 28 | (610) Dismantling one ordinary streetlight/CFL/LED fitting from existing poleand refitting the same on newly erectedpole including disconnecting andreconnecting wires. |
| 29 | (30.1) Stringing of one km 3 PH 11kV linewith XLPE Insulated ACSR Raccoon orequivalant (3 conductors) after fitting insulators, binding conductors to pininsulators using suitable tie and anchoring with wedge type anchoring clamps including cutting and removing tree branches wherever necessary excluding cut point works. |
| 30 | (30.2) Providing bridging at Cut points for 3PH 11kV line with XLPE Insulated ACSR Raccoon or equivalent (1 conductors) using IPC and respective conductors |
| 31 | (513) Dismantling (without damage) one km11kV line (three conductors) includingdismantling cross arm, insulators, disc,disconnecting jumper connection, rollingthe conductor and stacking the materials. |
| 32 | (566) Dismantling (without damage) one kmLT three phase 4 wire OH line conductorby dismantling cross arms, insulatorsand stacking the conductors in rollsproperly. |
| 33 | (567) Dismantling (without damage) one kmLT additional conductor line by dismantling cross arms, insulators and stacking the conductors in rolls properly. |
| 34 | (1.87) Additional rate for excavation of one Pitfor Coil Earthing in Laterite |
| 35 | (131) Additional rate for excavation of Pit forA type pole in Laterite. |
| 36 | (160) Additional rate for excavation of oneEarth Pit (2.5m depth) in Laterite. |
| 37 | (929) Laying HT XLPE UG cable of sizesbeyond 3x185 sq mm and upto and including 3x300 sqmm including conveying cable from Sub Regional Store/stacking place to work site and laying it carefully using cable rollers, taking through stone ware/G.I.pipes at road crossing/culverts/bridges etc. whereever necessary, providing identification tags at 5m intervals, filling the space around the cable with riddled soil and covering the top with bricks, providing cable route markers at 100m intervals, inclusive of cost of all materials (other than cost of GI/HDPE pipe & UG Cable), labour and transport including crane charges excluding excavation and backfilling. |
| 38 | (934) Mounting and connecting HT XLPE UGcable ends of all sizes upto and including3x300 sq mm with special type cableclamps, bolts, nuts, terminal protectorsetc.including cost of extra materials ifneeded and giving necessary jumperconnections. |
| 39 | (933) Doing one cable end termination on HTXLPE UG cables of sizes beyond 3x185sqmm and upto and including 3x300 sqmm using the cable jointing kit supplieddepartmentally after makingfencing,caution board and all othersafety measures including charges forcable jointer etc. complete as per thedirection of the departmental officers. |
| 40 | (926) Excavation of cable trench ofappropriate size ( normally 1.2m deepand 0.35m /0.5m wide for single/doublerun) in all classes of soil includingbreaking clods, watering, ramming and sectioning of soil bank etc. and backfilling the soil after cable laying andconsolidating the soil in layers of 75cm(excluding laying of cable). |
| 41 | Total of BoQ1 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 days