Tender For Welcome Maintenance Including Allied Works Services At Officers Jcos & Ors Md Accn At Mcmm Under Ge (East) Jabalpur
Tender Value
49 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
16 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Welcome Maintenance Including Allied Works Services At Officers Jcos & Ors Md Accn At Mcmm Under Ge (East) Jabalpur
BOQ
| Sl. No. | Item Description |
| 1 | M&L for preparation of old decorated plastered/un-plastered surfaces of wall at any height, pillars, cornices by brooming washing, rubbing down at any height including necessary scaffolding and applying two coats of white wash complete all as specified and directed. |
| 2 | M&L for preparation of old decorated plastered/un-plastered surfaces of wall at any height, pillars, cornices by brooming washing, rubbing down at any height including necessary scaffolding and applying one coat of cement base paint complete all as specified and directed. |
| 3 | M&L for preparation of old decorated plastered/un-plastered surfaces of wall at any height, pillars, cornices by brooming washing, rubbing down at any height including necessary scaffolding and applying two coat of cement base paint over a coat of primer complete all as specified and directed. |
| 4 | M&L for preparation of old decorated plastered/un-plastered surfaces of wall at any height, pillars, cornices by brooming washing, rubbing down at any height including necessary scaffolding and applying two coat of cement base paint over avg 1mm thick wall care putty complete all as specified and directed. |
| 5 | M&L for preparationn of old decorated plastered/un-plastered surfaces of wall at any height, pillars, cornices by brooming washing, rubbing down at any height including necessary scaffolding and applying two alkali & fungal resistance, dirt resistance exterior emulsion weather coat paint of required shade over and including priming coat of exterior primer complete all as specified and as directed. |
| 6 | M&L for preparation of old surfaces of plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed. |
| 7 | M&L for preparation of old surfaces of plastered or unplastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed. |
| 8 | M&L for preparation of old decorated plastered/un-plastered surfaces of wall at any height, pillars, cornices by brooming washing, rubbing down at any height including necessary scaffolding and applying one coat of oil bound distemper complete all as specified and directed. |
| 9 | M&L for preparation of old decorated plastered/un-plastered surfaces of wall at any height, pillars, cornices by brooming washing, rubbing down at any height including necessary scaffolding and applying two coat of oil bound distemper over a coat of primer and avg 1mm thick wall care putty complete all as specified and directed. |
| 10 | M&L for preparation of old decorated plastered/un-plastered surfaces of wall at any height, pillars, cornices by brooming washing, rubbing down at any height including necessary scaffolding and applying two coats distmper oil emulsion over a coat of primer and avg 1mm thick wall care putty complete all as specified and directed. |
| 11 | M&L for preparation of old steel surfaces of any description not otherwise described over 10 cm width or girth and applying, one coat of synthetic enamel paint complete all as specified and directed. |
| 12 | M&L for preparation of old steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 13 | M&L for preparation of old steel surfaces of any description n exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 14 | M&L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 15 | M&L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 16 | Complete removal of existing treatment on old wooden sufaces of any layer and making the existing surfaces clean with sand paper and fill the gap, voids, cracks with necessary filler and applying two coat of malamine polish with paint brush or spray gun over a coat of primer all as per direction of Engr-in-Charge complete all as specified and directed |
| 17 | Complete removal of existing treatment on Brick /concrete, stone, asbestos cement, Mangalore pattern or similar tiles in roofing surface over 10cm girth or width applying one coat plastic emulsion complete all as spacified and directed. |
| 18 | Complete removal of existing treatment on Brick/cnocrete, stone, Asbestos cement,Mangalore pattern or similar tiles in roofing surface over 10cm girth or width applying two coat plastic emulsion complete all as spacified and directed. |
| 19 | Dismantling of single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed. |
| 20 | Dismantling battens for tiles of any size including tilting fillets spaced exc 15cm complete all as specified and directed. |
| 21 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 22 | M&L for roof tiles, Manglore pattern, interlocking at side joints laid dry at any height including scaffolding etc complete all as specified and directed. |
| 23 | M&L for ridge or hip tiles to suit Manglore pattern of roofing tile, bedded and jointed in cement mortar 1:6 at any height including scaffolding etc complete all as specified and directed. |
| 24 | S&F second class hardwood battens at 30 cm centres of sectional area exc.15 sq cm and n. exc. 25 sq cm complete all as specified and directed. |
| 25 | S&F 0.63 mm thick galvanised corrugated mild steel sheeting, class-8 with two corrugations side lap, bent to a curve,fixed with L-type or J-type or cranked hook bolts and washers, ISI marked in roofs etc at any height including scaffolding etc., complete all as specified and as directed. |
| 26 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 27 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 28 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground, post embeded in concrete or brick masonary complete all specified and directed. |
| 29 | Dismantling timber scantlings 40 sq.cm and over in section, in any position as framed complete all as specified and directed. |
| 30 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 31 | S&F rolled mild steel conforming to FE 410-W (Gde E-250 quality A) or Fe290 (Gde-165) as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 32 | S&F MS steel flat iron as in wind tie for roof sheet including securing bolts (Fe-290 E-165) complete all as specified and directed. |
| 33 | Dismantling of wall & ceiling Boards ( fibre,pulp,insulation etc. ),or insulation board/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 34 | S&F powder coated aluminium snap grid frame work for false ceiling with aluminium angle 25 mm x 25 mm x 1.5 mm fixed to perimeter of wall, main 'T' runner 38 mm x 25 mm x 1.5 mm and secondary/cross 'T' runner 25 mm x 25 mm x 1.5 mm to be interlocked in such a way that the size of grid shall be 605 mm x 605 mm including 6 mm dia GI hangers (upto 1200 mm length) adjusting level fixed to roof by means of ceiling cleats made out of GI flat 40 x 3 mm, 60 mm long and expansion hold fasteners 12.5 mm dia , 40 mm long and 4 mm thick Non asbestos fibre board (E-board or V board) designer tiles (Electra) suitably fixed in false ceiling grid/frame with staples or screws complete all as specified and directed. |
| 35 | Fixed in repair only powder coated aluminium snap grid frame work for false ceiling with aluminium angle 25 mm x 25 mm x 1.5 mm fixed to perimeter of wall, main 'T' runner 38 mm x 25 mm x 1.5 mm and secondary/cross 'T' runner 25 mm x 25 mm x 1.5 mm to be interlocked in such a way that the size of grid shall be 605 mm x 605 mm including 6 mm dia GI hangers (upto 1200 mm length) adjusting level fixed to roof by means of ceiling cleats made out of GI flat 40 x 3 mm, 60 mm long and expansion hold fasteners 12.5 mm dia , 40 mm long and 4 mm thick Non asbestos fibre board suitably fixed in false ceiling grid/frame with staples or screws, complete all as specified and directe. Note :- the rate quoted for repair of falce celling shall be include all related material, accessories scafolding, labour and other item use in repair of false celling work. No extra payment shall be paid sepratalely |
| 36 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 37 | M&L Virified Ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matc including screed bed of 15mm thick in CM 1:6 complete all as specified and directed. |
| 38 | M&L Vitrified ceramic tiles 9-10mm thick in dado/skirting etc set and jointed in neat cement slurry and pointed in white cement to match with pigment including backing coat 10mm thick in CM 1:4 complete all as specified and directed. |
| 39 | S&F Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 40 | S&F Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 41 | S&F Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, inin dado/skirting etc set and jointed in neat cement slurry and pointed in white cement to match with pigment including backing coat 10mm thick in CM 1:4 complete all as specified and directed. |
| 42 | S&F Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 43 | S&F Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 44 | S&F Glazed ceramic tiles (450x300)x 8-10 mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 10 mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 45 | Dismantling stone slabs and tiles of any discription or thickness in floors, aprons etc, laid bedded and pointed in any mortar, complete all as specified and directed by engineer-in-charge. |
| 46 | M&L for Machine cut kota stone slab flooring 20-25mm thick over 20mm thick cement screed in CM 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 47 | M&L for Kota stone slab 20-25mm thickin riser steps, skirting or dadao and pillar laid over 10mm thick backing coat in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 48 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding laid over 20 mm thick screed bed in CM 1:4 rates including moulding and rounding complete all as specified and directed. |
| 49 | M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 50 | Taking down chowkhat n. exc. 1.5 sqm each without taking off shutter from frame complete all as specified and directed. |
| 51 | Taking down chowkhat exc. 1.5 sqm and n. exc. 4.00 sqm each without taking off shutter from frame complete all as specified and directed. |
| 52 | Taking down Shutters of any description exc 1 sqm but not exc 2 sqm each complete all as specified and directed. |
| 53 | Taking down Shutters of any description exc 2 sqm each complete all as specified and directed. |
| 54 | Resecuring or easing and adjusting without taking down Shutters of any description exc. 1 sqm but not exc. 2 sqm each complete all as specified and directed. |
| 55 | Resecuring or easing and adjusting without taking down Shutters of any description exc 2 sqm each complete all as specified and directed. |
| 56 | S&F (factory made) steel windows with side hung shutters including projecting type hinges with lugs steel handles and steel peg stays, with glazing bars, dovetailed or welded complete all as specified and directed. |
| 57 | S&F (factory made) steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified. |
| 58 | S&F powder coated aluminium ventilator shutters, partly fixed and partly louvered type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified and directed. |
| 59 | S&F 4 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 60 | S&F powder coated aluminium frame for doors, windows, ventilators, partition with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 61 | S & F powder coated Aluminium sliding windows three track with two glass shutters using 4 mm thick glass tinted and one shutter with stainless steel wire gauge wire cloth 0.31mm nominal dia of wire and width of aperture 1.61mm, using Aluminium powder coated sect, Alumini cleat, PVC track, bearing, handle lock rubber beading, etc complete. Note Size of aluminum sections are as under :-(i) Shutter vertical section - Jindal main – 2010 Section No 20606.(ii) Shutter top & bottom - Jindal main – 2010 Section No 20604(iii) Shutter vertical middle (interlock) - Jindal main – 2010 Section No 20605.Note : 4 mm thick tinted glass and wire cloth shall be measured and paid separately. |
| 62 | S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 63 | S&F in repair 4 mm thick tinted sheet glass, with necessary clip or clamp, screws etc in square n exc 0.5 sqm in each pane complete all as specified and directed. |
| 64 | S& F Powder coated aluminium door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws including taking down existing shutter complete all as specified |
| 65 | S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 66 | S & F Sheet glass 5.5 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane. |
| 67 | M&L for 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to aluminium frame work all as specified and directed. |
| 68 | S&F in repair Anodised aluminium grill (Anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design /pattern ,with approved standared section and fixed to the existing window frame with C P Brass/stainless steel screws @200 mm centre to centre ,including cutting the grill to proper openīng size for fixing and operation of handle and fixing approved anodised alumininum standard section around the opening ,all complete as per requirement and direction of Engineer-in-charge. |
| 69 | S&F in repair Mortice lock,vertical type size 100 mm 4 lever complete all as specified and directed |
| 70 | S&F aluminium (Die cast) body door closer hydrau lically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed, complete as spacified and directed by Engineer-in-charge. |
| 71 | S&F in repair aluminium (Die cast) body door closer hydrau lically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed, complete as spacified and directed by Engineer-in-charge. |
| 72 | S & F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 73 | S&F 105X60 mm size of Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed. |
| 74 | S&F 125X60 mm size of Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed. |
| 75 | M&L for plain cement concrete Type C1, 1:3:6 ( using 20 mm graded aggregate) for filling of hollow pressed steel frame complete all as specified and directed. |
| 76 | S & F 25 x 3mm F1 hold fast conforming to Fe 290, Gde -E-165 complete all as specified and directed. |
| 77 | M&L for plain cement concrete Type B-0 1:2:4 (using 12.5 mm graded stone aggregates) for fixing hold fast including repairing of disturbed plaster (while taking down Door/window,ventilator frame) and matching the repaired surface with existing one complete all as specified and directed. |
| 78 | S&F 35mm thick second class hardwood factory made flush shutters, solid, core construction with black board core and plywood face panals commercial type on both sides complete all as specified and directed. |
| 79 | S&F 35 mm thick second class hardwood factory made glazed and skelton shutters open rebated and prepared to receive glass gauge etc. wihout sash bars sizes of the members of the shutters as specified in SSR Part-I section 8 , clause 8.24 (a) complete all as specified and directed. |
| 80 | S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS square tube as specified & directed. |
| 81 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail bottom rail on either side & as gap insert for top rail & bottom rail panel ling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stile & rails with suitable PVC sheet beading & joined together with solvent cement specified and shown on drawing complete all as specified and directed. |
| 82 | S&F factory made solid PVC chowkhat/ door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet and edges will be painted to match with printed PVC sheet reinforced with 19mm x 19mm MS square tube of 19 gauge including rubber gasket, PVC fastners, screws, brackets, and shown on drawing as per SSR part-II (2020), complete all as specified and directed by engineer-in-charge. |
| 83 | S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick wood grain printed moulded prelam PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed by Engineer-in-charge. |
| 84 | Dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed by Engineer-in-charge. |
| 85 | S&F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing specified & directed. |
| 86 | S&F 18mm thick Solid PVC Sandwich Panel with lmm plain colour PVC Sheet on both sides suitably fixed in M.S. angle frame work as per specification & drawing complete all as specified and directed. |
| 87 | S&F 12mm thick Solid PVC Sandwich Panel with lmm plain colour PVC Sheet on both sides suitably fixed in M.S. angle frame work as per specification & drawing complete all as specified and directed. |
| 88 | S&F in repair Brass Locks, 2 levers for cupboard, grade I, size 50 mm complete all as specified and directed. |
| 89 | S&F in repair 75 mm Brass handles, cast type, polished bright for cupboard complete all as specified and directed. |
| 90 | S & F in repair 30 mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 91 | S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of Brass, bright finished complete all as specified and directed. |
| 92 | S&F in repair 150mm brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed. |
| 93 | S&F in repair 150mm size extruded brass handle fabricated type, polished complete all as specified and as directed. |
| 94 | S&F in repair 300mm Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed. |
| 95 | S&F 100mm butt hinges extruded aluminum alloy with galvanised mild steel hinge pin anodised type B-21 complete all as specified and directed. |
| 96 | S&F 150 mm long aluminum anodized barred tower bolts of extruded section complete all as specified and directed. |
| 97 | S & F 150 mm extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed. |
| 98 | S & F 300 mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed complete all as specified and directed. |
| 99 | S & F Aluminium door stopper of size 150 mm long double legged fixed to bottom rail of door shutter provided with rubber bushing at one end to stop the door at floor and other end provided with aluminium plate base fixed with door shutter with screws at appropriate height complete all as specified and directed. |
| 100 | S&F MS 300mm helical door springs including roller and roller plate complete all as specified and directed. |
| 101 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 102 | S&F in repair 100mm butt hinges extruded aluminum alloy with galvanised mild steel hinge pin anodised type B-21 complete all as specified and directed. |
| 103 | S&F in repair 150 mm long aluminum anodized barred tower bolts of extruded section complete all as specified and directed. |
| 104 | S &F in repair 150 mm extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed. |
| 105 | S &F in repair 300 mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed complete all as specified and directed. |
| 106 | S &F in repair Aluminium door stopper of size 150 mm long double legged fixed to bottom rail of door shutter provided with rubber bushing at one end to stop the door at floor and other end provided with aluminium plate base fixed with door shutter with screws at appropriate height complete all as specified and directed. |
| 107 | S&F in repair MS 300mm helical door springs including roller and roller plate complete all as specified and directed. |
| 108 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed. |
| 109 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and as directed. |
| 110 | S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 111 | Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 112 | M&L for PCC 1:5:10, type E-2 using 40mm graded aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 113 | M&L 15 mm thick renedering on fair faces of brick work or concrete surfaces in cement mortar (1:3) finished even and smooth without using extra cement with using water proofing liquid complete all as specified and directed. (WPL shall be measured and paid separately) |
| 114 | M&L for applying acrylic cementicious polymer modified elastomeric waterproofing & protective coating like brush bond of Fosroc or Pidifin 2K (Pidilite) as per manufacturer instructions on rendered surfaces of floor and wall of sunken portion complete all as specified and directed. |
| 115 | Demolition of brick work/ stone masonry/ PCC block masonry built in cement mortar or cement lime mortar including all quoins, pillars, arches etc, but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed. |
| 116 | Taking down cement plaster on brick/concrete/stone surfaces including racking out jointing hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 117 | M&L for old size bricks with fly ash bricks straight or curved on plan exc. 6m mean radius and setting in cement mortar 1:6 etc. complete all as specified as directed. |
| 118 | M&L 10 mm thick renedering on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed. |
| 119 | M&L 15mm thick rendering on fair faces of brick surfaces in CM (1:4), first coat 10 mm thick plaster in CM 1:4 and second coat 5 mm thick in CM 1:4 with using water proofing liquid finished surfaces even and smooth without using extra cement complete all as specified and directed. (WPL shall be measured and paid seperately). |
| 120 | Material & labour for 5 mm thick cement plaster on ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete in complete all as specified and directed. |
| 121 | M&L for preparation of newly plastered surfaces of wall and applying two coats distmper oil emulsion over a coat of primer and avg 3 mm thick wall care putty complete all as specified and directed. |
| 122 | M&L for prepraring newly plastered surfaces of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 123 | Material & labour for preparation of new plastered surfaces of celling and applying two coat of white lime wash complete all as specified and directed. |
| 124 | Supply only liquid water proofing compound complete all as specified and directed. |
| 125 | M&L framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 126 | Taking up or down 15mm bore steel water tubing & connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 127 | Taking up or down 20 mm bore steel water tubing & connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 128 | S&F 15mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling or laid in floors complete all as specified and directed. |
| 129 | S&F 20 mm bore medium grade galvanished tube with all fitting & fixed complete to walls or ceiling or laid in floors complete all as specified and directed. |
| 130 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall complete all as specified and directed. |
| 131 | Dismantling 500 ltrs capacity water tanks and removing to store and S&F 500 ltrs capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 132 | Dismantling 1000 ltrs capacity water tanks and removing to store and S&F 1000 ltrs capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 133 | Cleaning and removing all scale and dirt etc from water tanks and from mouths of circulating pipe exc 500 and n.exc 1000 ltr capacity tank. After cleaning write the date of cleaning with paint on tank complete all as specified and directed. |
| 134 | All as item No 133 here-in-before but exc 250 and n.exc 500 ltr capacity complete all as specified and directed. |
| 135 | S&F 20mm bore ball brass valve, high pressure with polythene float & fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 136 | S&F in repair 20mm bore Gun metal gate valve with iron wheel head screwed both end for iron pipe complete all as specified and directed. |
| 137 | Demolition and breaking up 110/75 mm dia drain pipes along with acessary (Salt glazed ware, PVC, AC or Reinforced concrete) set in cement mortar complete all as specified and directed. |
| 138 | S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified. |
| 139 | S&F PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls 75mm bore complete all as specified and directed. |
| 140 | S&F 110mm bore PVC (S.W.R) bend with access door complete all as specified and directed. |
| 141 | S&F 110mm bore PVC (SWR) branch piece, single `Y’ equal or un equal with access door complete all as specified and directed. |
| 142 | S&F 75mm bore PVC (S.W.R) bend with access door complete all as specified and directed. |
| 143 | S&F 110mm bore PVC vent cowl complete all as specified and directed. |
| 144 | S&F PVC floor trap 75 mm dia with CP gratings complete all as specified and directed. |
| 145 | S&F PVC nahani trap 110 mm dia with CP gratings complete all as specified and directed. |
| 146 | S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including seat cover complete all as specified and directed. |
| 147 | S & F in repair Vitreous China snow white colour single pieces EWCs of Size 595 x 375 x 730 mm with S Trap 288mm and duroplast slim soft close seat cover complete all as specified and directed. |
| 148 | S& F in repairs vitreous china water closet squatting pan 'orissa pattern, ivory coloured of size 580 x 440 mm, with integral foot rest and outlet for 'P' or 'S' trap , WC pan shall be set in lean concrete below level of rim of pan to receive the floor finish complete all as specified and directed. |
| 149 | S&F in repair PVC valveless syphonic action type flushing cistern 10 ltrs capacity low lwvel, white with inlet ball valve, float and handle including brackets flush pipe of polythene of low or high density of PVC 32mm dia for low level cistern complete all as specified. |
| 150 | S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm including brackets complete all as specified and directed. |
| 151 | S&F in repairs vitreous china white counter oval shape wash hand basin of size 630x450mm incl brackets complete all as specified. |
| 152 | S&F in repairs brass chromium plated bottle trap for wash basin/sink with inlet and outlet screwed for pipe or connections including necessary packing, union and cap bore of trap 32mm fixed complete all as specified and directed. |
| 153 | S&F waste coupling brass CP for glazed ware sink, WHB etc with long screwed shanks and fly nuts complete of 32mm dia.etc. complete all as specified and directed. |
| 154 | S&F in repairs sinks made of stainless steel 1 mm thk kitchen with plugs, washers and wastes incl bedding in cement mortar on to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 495mm X 420mm bowl size size 410mm X 330 mm X 160mm complete all as specified and directed. |
| 155 | S&F 40mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 156 | S&F in repairs tubular towel rail 20 mm dia 'D' type 600mm long of stainless steel complete all a specified and diredted. |
| 157 | S&F in repairs 600 mmx450 mm looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood or PVC and fixed to wooden plugs with chromium plated brass screws and cup washers as directed by Engr in Charge. |
| 158 | S&F in repairs 15mm bore fancy type long neck chromium plated bib taps with crutch or butterfly handle screwed down for iron pipes complete all as specified and directed. |
| 159 | S&F in repairs angle stop valves 15mm bore, fancy type chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified |
| 160 | S&F in repairs 15mm bore PVC connection with PTMT nuts of length 450mm complete all as specified and directed. |
| 161 | Supply and fix in repair 15 mm bore long neck CP pillar taps, fancy type, cast copper alloy with capstan heads screwed down high pressure with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. |
| 162 | S&F in repair brass chromium plated shower rose 125mm size complete all as specified and directed. |
| 163 | S&F in repairs 20 mm dia curtain rod brass chromium plated with fixing fancy bracket stops rollers etc for any size of opening complete all as specified and directed. |
| 164 | S&F repair Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 165 | M&L preparing new steel surfaces and applying two coat of syntheitc enameled paint over a red oxide primer exc 10 cm width or girth complete all as specified and directed. |
| 166 | M&L for preparation of new or previously un treated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of priming complete all as specified and directed. |
| 167 | Supply and fix in repair 15 mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed as specified and directed by Engineer-in-charge. |
| 168 | S&F in repairs EWC Seat cover ( colour - white ) for Vitreous China wash down water closet pan (pedestal pattern) all as specified and as directed. |
| 169 | S&F in repair CP health faucets including all neceesary fittings specifictions all as specified and directed. |
| 170 | S & F in repair PVC waste pipe 32 /40 mm dia x 600 mm long complete all as specified and directed. |
| 171 | S&F in repairs 40mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 172 | S&F in repairs 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 173 | Supply and fix in repairs 20mm bore ball brass valve, high pressure with polythene float and flynut complete, scrwed for iron pipe or brass ferrule fixed in repair complete all as specified and as directed. |
| 174 | S&F in repair 15 mm dia brass CP wall mixer 3 In 1 With Wall Flange (Provision For Over Head Shower & Hand Shower) unit for mixing hot & cold water screwed down for iron pipe and fixed including all necessary fittings complete all as specified and directed. Cat No. 9080 make Prayag |
| 175 | S&F in repair ABC Overhead Shower Shower squre of size Size - 150mm x150mm Brass Arm 375mm with Brass Arm and Flange complete all as specified and directed. |
| 176 | S&F in repairs for Chrome Plated ABS Health Faucet with 1.0 Meter Long PVC Tube & Wall Hook in Blister Packing complete all as specified and as directed. |
| 177 | S&F in repairs for Hand ShowerChrome Plated ABS Hand Rainduet Shower 5-Function with 1.5 Mtr. SS Tube & ABS Hook with Easy Flex Tube in Chrome Finish 1.5m Long with Nuts complete all as specified and as directed. |
| 178 | S&F in repair Glass Soap Dish with Brass Stand , complete all as specified and directed by engineer-in-charge. |
| 179 | S&F in repair kitchen steel plate rack of size 786x914x254 mm stainless steel of standard quality including fittings complete all as specified and directed. |
| 180 | S&F in repair CP Cloth peg set including fittings complete all as specified and directed. |
| 181 | S&F in repair CP 2-Way Bib Cock Double Handle with Wall Flange complete all as specified and directed. |
| 182 | S & F in repairs PVC box type mirror cabinet selected quality of size 60cm X45 cm X 15 cm thick coloured fixed with min 04 Nos screws fixed on walls complete all as specified and directed. |
| 183 | S&F in repairs 15mm bore brass CP center hole wash basin mixture without Popup including all necessary fittings complete all as specified and directed. |
| 184 | S&F in repairs 15mm bore brass CP Sink Cock Wall Mounted with Flange including all necessary fittings complete all as specified and directed. |
| 185 | S&F in repairs SS Jet Spray (L-Bend) with 1.5 Mtr. Tube with all necessary fittings complete all as specified and directed. |
| 186 | S&F in repairs Brass Towel Ring with all necessary fittings complete all as specified and directed. |
| 187 | S&F in repairs Brass toilet paper Holder with all necessary fittings complete all as specified and directed. |
| 188 | Schedule of credit amount of Rs 2,30,168.50 to be deducted during AOC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender