Tender For Provn Of Reinforced Cement Concrete Retaining Wall At Certain Places In 57 Weu Under Ge (North) Udh Ur.
Tender Value
43.29 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
10 days left
EMD
86500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udhampur → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Reinforced Cement Concrete Retaining Wall At Certain Places In 57 Weu Under Ge (North) Udh Ur.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation over areas, not exc 1.5 m in depth for foundation of retaining wall, boundry wall etc. and getting out in any type of soil all as specified and directed. |
| 2 | Excavation over areas, exc 1.5 m but not exc 3.0m in depth for foundation of retaining wall, boundry wall etc. and getting out in any type of soil all as specified and directed. |
| 3 | Excavation in trenches n exc 1.5 m in width and n. exc 1.50 m in depth and getting out in any type of soil all as specified and directed. |
| 4 | M&L cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) in foundation filling and mass concrete all as specified and directed. |
| 5 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, side & soffits (if any) of foundation and plinth beams, and similar work vertical or to batter complete all as specified and directed. |
| 6 | Use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc. vertical or to batter complete all as specified and directed. |
| 7 | M&L for RCC M-25 (Design Mix) using 20 mm graded crushed stone aggregates in foundations, including rafts, footings, foundation beams, plinth beams and mass concrete complete all as specified and directed. |
| 8 | M&L for RCC M-25 (Design Mix) using 20 mm graded crushed stone aggregates in Walls, retaining walls, basement walls, ballast walls and the like any thickness above top of footings including attached pilasters and buttresses complete all as specified and directed. |
| 9 | M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engr-in-charge. |
| 10 | M&L mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engr-in-charge. |
| 11 | S&F 110 mm dia PVC pipe (SWR) as in weep holes all as specified and directed. |
| 12 | Returning filling in soil including spreading leveling watering and well ramming in layers not exceeding 25 cm in any type of soil all as specified and directed. |
| 13 | Removal of excavated material as soils not exceeding 50 m and at a level not exceeding 1.5 m above the starting point and depositing all as specified and directed. |
| 14 | M&L of Boulder filling dry, handpacked lightly, as in wire crate apron bunds complete, all as specified and directed. Note: Wire crate shall be measured and paid for seperatly. |
| 15 | S&F 4 mm dia galvanised steel wire, 150 x 100 mm mesh made up into mattrasses or cages, lapped, wired and laid in position, including closing after filling, complete all as specified and directed. |
| 16 | M&L for walling of random rubble stone masonry uncoursed well bonded, bedded and solidly hearted, built in cement mortar (1:6) including providing weep holes complete, all as specified and directed. (NOTE:- PCC bond stone shall be measured and paid separately). |
| 17 | M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping, benching including weathering slightly rounded or chamfered angles as directed including necessary form work and finishing the exposed surfaces complete, all as specified and directed. |
| 18 | M&L for extra over stone walling for hammer dressing to face stone and dressing of face beds and joints as specified of random rubble walling, uncoursed or brought up to course, hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 20 mm for granite or trap stone complete, all as specified and directed. |
| 19 | Rendering 15 mm thick in CM 1:4 on stone masonary surfaces or surfaces other than fair faces of brickwork and finishing even & smooth without using extra cement complete, all as specified and directed. S&F in repair rigid non - metalic PVC casing caping of 25/12mm inclusive of all elbow, tees,etc complete all as per the direction of Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 01, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender