Tender For special Repair To Bldg No-P/56 At Mintsd And special Repair To Steel Windows In Bldg No- P/68, P/84, P/99 & P/103 At Mintsd Under Ge (S) Pune
Tender Value
45.09 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
12 days left
EMD
90180
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No-P/56 At Mintsd And special Repair To Steel Windows In Bldg No- P/68, P/84, P/99 & P/103 At Mintsd Under Ge (S) Pune
BOQ
| Sl. No. | Item Description |
| 1 | S & F Matt finish Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in neat cement slurry & pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6, incl dismantling old tiles of any description & removal of debris mtrl out of MOD land complete all as speicified and directed. |
| 2 | S & F Matt finish ceramic tiles 8-10 mm thick (square/ rectangular) satin finished with carving, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in neat cement slurry & pointed in white or coloured cement to match laid over and including 10 mm thick backing coat in CM 1:4, incl dismantling old tiles of any description & removal of debris mtrl out of MOD land complete all as speicified and directed. |
| 3 | M&L for coloured glazed ceramic designed tiles satin finished with carving in vertical surface 600x 300x 7mm thick set and jointed in neat cement slurry and jointed with 3 mm spacers and ponted in coloured epoxy grout to match the colour of tiles over incl. 10 mm thick backing coat in CM 1:4 to maintaine true plumb incl dismantling old tiles of any description & removal of debris mtrl out of MOD land complete all as speicified and directed. |
| 4 | M&L for non skid ceramic colored tiles 7 to 8mm thick (square / rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 Sqm as in floor etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6, incl dismantling old tiles of any description & removal of debris mtrl out of MOD land complete all as speicified and directed. |
| 5 | M&L for 25mm thick PCC type B-0 1:2:4 ( 12.50mm graded agg) as in levelling course in floor complete all as specified and as directed. |
| 6 | M & L granite (Telephonic jet black) work ( table rubbed and polished ) 18-20 mm thick in steps,risers, jambs, pillars, window cill , cooking platform and flooring including backing coat 10 mm thick in CM 1:4 on stone / brick masonry / concrete surfaces including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite incl dismantling old stone slab of any description & removal of debris mtrl out of MOD land complete all as speicified and directed. |
| 7 | Rounding edges of stone slab one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed. |
| 8 | M & L Machine cut cuddapa stone slabs one side polished 20 to 25mm thick set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 20mm screed bed in cement mortar (1:6) incl dismantling old stone slab of any description & removal of debris mtrl out of MOD land complete all as speicified and directed. |
| 9 | M & L for Machine cut kota stone slab flooring 20-25mm thick over and incl cement 20 mm thk screed in cm 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing incl demolition of old stone slab of any description and removal from site complete all as speicified and directed. |
| 10 | M & L for Machine cut kota stone slab single piece 20-25mm thick as in steps and risers over and incl cement screed in 20 mm thk cm 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing incl demolition of old stone slab of any description and removal from site complete all as speicified and directed. |
| 11 | S&F GI tubing tubes \\"medium grade\\" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc including taking up or down carefully steel tubing and connections complete all as specified and directed of the following sizes :- |
| 12 | (a) 15mm bore |
| 13 | (c) 25 mm bore |
| 14 | S&F in repairs Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & directed of following bore of pipe :- (a) 25 mm bore |
| 15 | S&F in repair vitreous china squatting pan (Orissa pattern) long pan including provision of lime concrete bedding fixed in repair of size 580x440mm white with intergral footrest with 'P' or 'S' trap complete (excluding flushing cistern and flush pipe), complete all as specified and directed. |
| 16 | S&F in repairs 10 Itrs capacity PVC (White) valve less syphonic action type, flushing cistern, low level with inlet ball valve float, handle, incl flush pipe, of polythelene of low level of 32 mm dia and aluminium brackets for bottom support fixing with gutties embeded in wall with drilling machine etc complete all as specified and directed. |
| 17 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades,shelves , lintels, etc.and cutting chases for concealed water tubing/Galvalume sheet and making good, cutting not exc 10 cm girth in Stone concrete block or slab |
| 18 | S&F in repair vitreous china wash hand basin, white, 550x 400mm flat back including providing CI brackets, PVC waste pipe 32mm dia, waste coupling 32mm bore of CP incl 15mm bore CP fancy type pillar cock etc all as specified and directed. |
| 19 | S&F in repairs 15mm bore bib taps, brass chromium plated, cast copper alloy fancy type handle screwed down, screwed for iron pipes all as specified . |
| 20 | S & F in repairs 15 mm bore pillar taps,fancy type 200 mm extension long neck body cast copper alloy with capstan heads, chromium plated , screwed down high pressure with long screwed shanks and fly nuts, Makr Jaquar- ORP-CHR-10021PM complete all as specified and directed. |
| 21 | S & F in repairs 15 mm chromium plated 2 way bib cock fancy type with wall flange complete all as specified and directed. Make Jaquar or equivalent as per directed by E-in-charge. |
| 22 | S & F in repairs 15 mm stop valves / angular stop cock, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed. |
| 23 | S&F in repairs CP Wall mixer 3-in-1 for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore of pipe make jaquar prime series OPP-15117 PM or equivalant complete all as specified and directed. |
| 24 | S & F in repairs 300 mm dia brass chromium plated shower rose including shower arm make- Jaquar OHS-CHR-1633 or equivalent complete all as specified and directed. |
| 25 | S & F in repairs 15 mm bore, 600 mm long PVC connections with PTMT nuts complete fixed to iron pipe at both ends complete all as specified and directed. |
| 26 | S & F in repairs brass chromium plated Tubular towel rail 20mm dia \\"D\\" type 60cm long complete all as speicified and directed. |
| 27 | S & F in repairs chromium plated soap dish fixed to plugs with chromium plated brass screws complete all as speicified and directed. |
| 28 | S & F Towel Ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats fixed in repairs complete all as speicified and directed. |
| 29 | S & F in repairs 5.5mm thick bevelled edge mirror of selected quality glass mounted with SS round studs complete Complete all as specified and directed |
| 30 | S& F in repair 5mm thick sheet glass corner shelf, 250mm radius including CP railing and CP brackets, complete all as speicified and directed. |
| 31 | S & F in repairs stainless steel kitchen sink without drainage board of 1 mm thick with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets or fixed as in counter type in granite/ cudappa platform and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as speicified and directed. |
| 32 | S & F Rotational moulded polyethylene water storage tanks of capacity 1000 Litre (cylindrical vertical with closed top) hoisted and fixed in position incl all necesarry GI fittings including dismantling of existing water tank complete all as specified and directed. |
| 33 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including taking down existing pipe complete all as speicified and directed.Note :- Rate quoted shall deemed to be inclusive of necessary scaffolding / security measures as the work is to be carried out for elevated height upto 12 mtr height building. |
| 34 | S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall,including taking down existing pipe complete all as speicified and directed.Note :- Rate quoted shall deemed to be inclusive of necessary scaffolding / security measures as the work is to be carried out for elevated height upto 12 mtr height building. |
| 35 | S&F 110mm bore PVC (SWR) bends / Tee with acess door, complete all as speicified and directed. |
| 36 | S&F 75mm bore PVC (SWR) bends / Tee with acess door, complete all as speicified and directed. |
| 37 | S&F in repairs 2mm thick PVC fibre mirror cabinet of size (450x325x120mm ) and fixed to wall after taking down old mirror, complete all as speicified and directed. |
| 38 | S&F in repairs, stainless steel plate rack of size 36inch x 39 inch x 10inch, made out of 0.63mm thick stainless steel sheet (Grade AISI 304 18/8), S S screws and round pipe, fixed to wall with screws complete all as specified and as directed. Make – Blue Star Silver Shine Cat No.KPR-315 or equivalent from Nirali / Jain Brothers Sanitation Pvt Ltd (Jayna) as approved. |
| 39 | Taking down of chowkat with shutter exc 1.50 sqm & nexc 4.0 sqm each without taking off shutters from the frame complete all as specified and directed. |
| 40 | Taking down of chowkat with shutter nexc 1.50 sqm each without taking off shutters from the frame complete all as specified and directed. |
| 41 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules ofelasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with fastners of reqd dia & length complete. |
| 42 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having min density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 ,laminated on both face wooden texture, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (rate inclusive of SS hinges 100 mm-03 nos/ shutter) |
| 43 | 'S&F in repairs 150mm size extruded aluminium alloy tower bolt fabricated type anodised complete all as specified. |
| 44 | S&F in repairs 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified. |
| 45 | S & F in repairs aluminium anodised sliding door bolts 300 mm size with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified. |
| 46 | S&F Stainless Steel 304 grade Silver finish curtain rod 25 mm bore all as specified & as directed.(Make : Herrlich Homes or equivalent.) |
| 47 | S &F stainless steel fancy type round shape ball bracket suitable for 25 mm bore curtain rod complete all as specified |
| 48 | S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to steel or wooden windows / door / shutters / frames etc. complete all as specified and as directed. |
| 49 | S&F in repairs three track sliding window anodised powder coated shade / shade as approved with two or more shutter with 4mm thick tinted glass and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium anodised sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724(e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352. |
| 50 | S & F in repairs ventilators/louvers using 4mm thick x 10cm wide frosted glass strips and following aluminium powder coated, shade as approved sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed(a) SP : 20045(b) Glazing clips : 19352 |
| 51 | S & Fixe in repair 18 mm thk PVC sheet in kitchen cabinet and shutter of cabinet work one side prelim of any shade complete all as specified. Make- Rajashri / syntex |
| 52 | S & F Continuous (piano) hinges 30 mm width of flap,mild steel, bright finish or electrogalvanised complete all as specified and as directed. |
| 53 | S & F Magnetic door catches for cupboard/cabinet etc complete all as specified and as directed. |
| 54 | S&F 100mm dia Brass handles, cast type, polished bright cupboard handles fixed with nuts screws and washer complete all as specified and directed. |
| 55 | M&L for rendering 15mm thick in CM(1:6) on stone masonry work surfaces, finished even & smooth (without using extra cement), complete all as specified and directed. |
| 56 | M&L cement concrete type 100 mm thick B1, 1:2:4 mix usisng 20mm graded stone aggregates as in tank base and bases for water pipes to hang over RCC slab incl dismanteling old concrete of any type complete |
| 57 | M&L for rendering 10mm thick in CM 1:3 on concrete surfaces / slabs finished even and smooth without using extra cement with admixture of integral water proofing compound @ 3% by weight of cement for filling depressions if any to receive water proofing treatment (WPC shall be measured & paid seperately) |
| 58 | Supply only integral water proofing compound |
| 59 | S & F APP based polymeric membrane minimum weighing 3.60 kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid with and including primer @ 0.70 ltr/sqm by torched application incl cutting grooves 20mmx25mm in parapet of any description for inserting APP membrane & filling grooves in cm 1:3 and M & L for preparation of new untreated surfaces of APP membrane and applying two coats of Aluminium paint complete all as specified incl Dismantling / taking out of existing roof treatment having in single layer or multi layer in roofs any thickness including plastering, concreter padding including brick tiles or terracing tiles any description on horizontal and vertical surface and removed spoil / rubbish out side MD land.Note :- 1. The surface shall be wired brushed and clean to receive the PCC padding. 2. Note : Treatment to be carried out at any height of bldg & necessary safety precaution to be taken at the time of working |
| 60 | M & L Preparation of old decorated surfaces by brooming down rubbing and scraping down where ever necessary and applying one coat of white wash on ceiling all as specified and directed |
| 61 | Complete removal of existing treatment and M&L for applying two coats of distemper oil emulsion 3 mm thick wall care putty and akali resistant primer one coat on walls all as spd and directed. |
| 62 | Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) incl dismanteld masonry / plaster surface good with internal and external painting of disturbed portion as per existing specifications |
| 63 | S & F factory made rolled framed Powder coated Galvanised steel window (Box Section) casement type double rebated out side glazed and inside flyproof shutter (any nos shutters) with MS grill at center of frame as per CEPZ TD drawing No- CEPZ/2016/TD/03 sheet 1R3 to 3R3 complete. Galvanised as per IS-277 with Zinc of 120 gms/sqm with total coated thickness 0.6 mm (base steel as per IS 513D quality). Each glazed shutter / wiremesh shutter shall be provided with SS pivot hinges, one set of poly propyelene handle 75 mm, Aluminium powder coated tower bolt-02 nos, and aluminium powder coated peg stey-01 nos for glazed shutter alone, 6 mm thk tinted glass, Stainless stell wire mesh 304 grade with nominal dia0.36 mm with avg width of aparture 1.14 mm, each window shall be provided with and incl MS powder coated grill made of 10 mm sq barwelded 100 mm c/c to 25x5 mm MS flat powder coated fixed to mullion with SS screws, powder coating shall be primed with epoxy primer of 5-7micron thk, finish painted with polymer paint of 12-16 micron thk, back coated with pure polyster powder coating50-60 micron thk. Window frame shall be fixed to brick, concrete, granite with nylon self expanding caps and driving MS electroplated 80 mm long 5-6 mm dia screwsthrough the frame complete all as per drawing as mentioned above incl making dismantled portion to good to match existing finish incl plastering disturbed surfaces and painting as per existing colour complete all as specified and directed |
| 64 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 65 | M&L for point wiring with 1.5 Sqmm PVC (FRLSH) insulated sheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLS) insulated sheathed multi stranded copper conductor cable draw in PVC casing capping including CI/MS sunk boxes on wall for mounting switches, sockets, regulators etc with 3 mm thick plastic laminated sheet cover of adequate size for one light/fan/bell point controlled by one switch and making good disturbed surfaces with CM (1:4) to match with the existing surface complete all as specified and directed by Engr-in-Charge. |
| 66 | Same as item no 2 but for One 5 Amps socket point on independent board |
| 67 | Same as item no 2 but for One 5 Amps socket point on same board with other switches |
| 68 | M&L for point wiring with two single core 4 Sq.mm size multistranded copper conductor PVC insulated cables and one single core 4.0 Sq.mm size green colour PVC insulated,multistranded copper conductor PVC cable as earth continuity conductor,1100 volts grade, complete drawn in and including rigid PVC casing capping and conduit accessories,confirming to IS specifications,mounted on wall/ ceiling /trusses with suitable clamps, screws etc., including 1.22 mm thick MS terminal boxes with 3 mm thick plastic laminated sheet top cover fixed with cadmium plated iron screws for mounting SOCKETS OUTLET 15 Amps multi purpose on independent board ches, sockets, fan regulators etc.,including connecting up and testing, all as specified and as directed. |
| 69 | M& L for dismantling and taking down fluorescent tube light frame single/double /street light fittings of any wattage or size for repair or replacement of burnt/worn out accessories complete all as specified and directed. |
| 70 | S&F in replacement of LED tubelight batten 20 W, 4 feet length,6500 k ,min 120 lms/watt, Aluminium housing with PMMA and prismatic diffuser with driver, Anti-glare, PH>0.95, THD<10% certified with LM79,LM80 from NABL complete all as specified and directed by Engr-in-Charge. |
| 71 | Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC,min 120 lms/watt, Aluminium housing with PMMA and prismatic diffuser with driver, Anti-glare, PH>0.95, THD<10% certified with LM79,LM80 from NABL decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge. |
| 72 | Taking down fan/ exhaust fan sealing cable end,dismantling blades and removing fan and blades to stores all as specified and directed by Engr-in-Charge. |
| 73 | Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan all as specified and directed by Engr-in-Charge. |
| 74 | S & F in repair stepped type electronic fan regulator flush type, 2 module on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed |
| 75 | S&F in repairs lamp holder, PVC/polycarbonate type with back plate complete all as specified and directed. |
| 76 | Fixing only exhaust fan and connecting up including provision of cable from ceiling rose/connector to fan complete all as specified and directed by Engr-in-Charge. |
| 77 | Supply and fixing in repair LED building security light fitting 35 Watt 230 V AC outdoor type, min 120 lms/watt, with high pressure die cast aluminum hosing and heat resistant complete with driver,PMMA and prismatic diffuser with driver, Anti-glare, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection and should have supporting LM 79 & LM 80 test certificate from NABL accredited Lab complete all as specified and directed by Engr-in-Charge. |
| 78 | Supply and fix in replacement switch piano 5 Amps one way flush type, ISI marked, all as specified and directed.Make ; Anchor/Havells / Philips/ Crompton Greaves/ Bajaj |
| 79 | Supply and fix in replacement socket outlet 2 in 1, 3 pin, 5 Amps flush type, make ISI marked, all as specified and directed. Make ; Anchor/Havells / Philips/ Crompton Greaves/ Bajaj |
| 80 | Supply and fix in replacement switch socket combination 6 Amps/16 Amp, 5 in 1 flush type, multi purpose, ISI marked, all as specified and directed.Make ; Anchor/Havells / Philips/ Crompton Greaves/ Bajaj |
| 81 | M&L in replacement of door bell AC 230 volts single phase ding dong type complete all as specified and directed by Engr-in-Charge. |
| 82 | S&F in replacement Bell push 6A, 1 module complete all as specified and directed by Engr-in-Charge. |
| 83 | M&L in replacement for sub main wiring with two runs of single core PVC FRLSH insulated cable with copper conductor multistranded 1100 volts grade 4.00 sqmm through and including with suitable size of PVC conduit and its accessories, concealed on wall surface in ceiling along with fixing arrangement etc including one runs of 4.00 sqmm PVC insulated multistranded copper earth contuinuity conductor and connected to common earth dolly complete all as specified. |
| 84 | M&L in replacement for sub main wiring with two runs of single core PVC FRLSH insulated cable with copper conductor multistranded 1100 volts grade 2.5 sqmm through and including with suitable size of PVC conduit and its accessories, concealed on wall surface in ceiling along with fixing arrangement etc including one runs of 2.5 sqmm PVC insulated multistranded copper earth contuinuity conductor and connected to common earth dolly complete all as specified. |
| 85 | M&L in replacement for sub main wiring with two runs of single core PVC FRLSH insulated cable with copper conductor multistranded 1100 volts grade 6.00 sqmm through and including with suitable size of PVC conduit and its accessories, concealed on wall surface in ceiling along with fixing arrangement etc including one runs of 6.00 sqmm PVC insulated multistranded copper earth contuinuity conductor and connected to common earth dolly complete all as specified. |
| 86 | M&L in repair for sub main wiring with two runs of single core PVC FRLSH insulated cable with copper conductor multistranded 1100 volts grade 1.5 sqmm through and including with suitable size of PVC conduit and its accessories, concealed on wall surface in ceiling along with fixing arrangement etc including one runs of 1.5 sqmm PVC insulated multistranded copper earth contuinuity conductor and connected to common earth dolly complete all as specified. Note: for item no 20 to 23(i) Each submain wiring shall run in separate PVC casing caping(ii) two run of single core cable and one run of earth wire shall be measured together as one leangth. |
| 87 | Supply & fixing in replacement of sheet metal enclosure MCB DB SPN 12 ways,IP 43, isolated neutral bar with door earthing, double door type complete all as specified and directed by Engr-in-Charge. |
| 88 | Supply and fixing in replacement amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP of 6 to 32 Amps current rating complete with connection testing and commissioning complete all as specified and directed by Engr-in-Charge |
| 89 | Supply and fixing in replacement amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN of 32 Amps current rating complete with connection testing and commissioning. |
| 90 | Supply and fix in repair for Ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed. |
| 91 | S&F in replacement Single pole and neutral enclosure with a two pin and earth plug and socket complete with double pole, 20 Amps, 220 V complete all as specified and directed by Engr-in-Charge. |
| 92 | M&L for Earthing complete with Galvanised Steel Earth Plate Electrode 600 X 600 X 6 mm thick buried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of Plate not less than 1.50 m below normal ground level connected to galvanised earth lead wire 4.0mm dia for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the Plate by means of GI Bolts & Nuts complete all as per Electrical Plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. and disconnecting and taking down existing Earthing of any description complete all as specified and as directed.(Note : GI earth strip and GI protection pipe upto 7.5 mtr length shall be included in this item.) |
| 93 | Supply and fixing in replacement amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) TPN of 32 Amps current rating complete with connection testing and commissioning. |
| 94 | Supply & fixing in replacement of sheet metal enclosure MCB DB TPN 4 ways,IP 43, isolated neutral bar with door earthing, double door type complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender