Tender For Repairs/ Replacement Of Joinery Works Incl Misc Works At Zone-Iii And Zone-Iv Areas Under Age B/R-Ii Of Ge Nagrota
Tender Value
30 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
15 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs/ Replacement Of Joinery Works Incl Misc Works At Zone-Iii And Zone-Iv Areas Under Age B/R-Ii Of Ge Nagrota
BOQ
| Sl. No. | Item Description |
| 1 | Taking down shutters of any description n exc. 1.00 Sqm each, complete all as specified and directed. |
| 2 | Taking down shutters of any description exc. 1.00 Sqm and n exc. 2.00 Sqm each, complete all as specified and directed. |
| 3 | Taking down Chowkats or Frame (without taking off shutter from the frame) n exc. 1.50 Sqm, complete all as specified and directed. |
| 4 | Taking down Chowkats or Frame (without taking off shutter from the frame) exc. 1.50 Sqm but n exc 4.00 Sqm each, complete all as specified and directed. |
| 5 | M&L for Pressed steel frames of size 105 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 6 | M&L for Pressed steel frames of size 125 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. |
| 7 | M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 8 | M&L for MS helical door spring 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete with welding, painting complete all as specified and directed. |
| 9 | M&L in repair MS helical door spring 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete with welding, painting complete all as specified and directed. |
| 10 | S&F in repair Floor door stopper of 140mm aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and directed. |
| 11 | S&F 2nd class Hard wood Small Fittings such as shaped door and window stops and the like incl all necessary labours articles not exceeding 200 Cu cm each complete all as specified and directed. |
| 12 | S&F Ball catches with 8mm dia steel balls and brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 13 | S&F continuous (piano) hinges mild steel, bright finish width of flaps (when open) 30 mm, complete all as specified and directed. |
| 14 | S&F in repair stainless steel / powder coated Peg set of five of good quality complete all as specified and directed. |
| 15 | S&F 35mm thick 2nd class hard wood Plain framed shutter (One/two panel) with lock rail and panel of 9mm BWP ccommerial ply or 12mm veneered particle board with ommercial veneering on both faces. The size of rail and stiles as per IS:1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 16 | S&F 35mm thick 2nd class hard wood Glazed and Skelton Shutter open rebated and prepared to receive glass gauze etc (without shas bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of numbers of shutter as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and directed. |
| 17 | Dismantling of boarding any description fixed in any position with nails complete all as specified and directed. |
| 18 | Providing and fixing cupboard shutters made of 18/19 mm thick block board, finished with 1.0 mm thick decorative laminate (sunmica) on outer face and 0.8 mm laminate on inner face, including 2 mm thick PVC edge banding / hardwood lipping on all exposed edges, complete with necessary hardware fittings such as stainless steel hinges, handles, magnetic catch / tower bolt, screws, etc., fixed in position, complete all as specified and directed. |
| 19 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 20 | Framed work 410-W as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including hinges welding complete all as specified and directed. |
| 21 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 22 | S&F Factory made Solid Panel PVC Door Shutter 30 mm thick consisting of frame made out of MS tubes for Top & bottom nails MS framed shall be covered with neat moulded plain coloured PVC 'C' channel having PVC sheet ship if 20 mm width stuck inside with solvant cement for style and plain colour PVC shutters for top rail lock rail and bottom rail on edges side & gap insert for top rail bottom rail panelling of plain colour PVC sheet truck and nail with suitable PVC sheet bedding and jointed to shutter with solvent gear supply and fixing in the frame at site complete all as specified and directed. |
| 23 | Hacking Out Old Broken Glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed. |
| 24 | M&L for Sheet Glass, 3.00mm thick glazing with Beads or Oil Putty, not exc. 0.5 Sqm in Each Pane, complete all as specified and directed. |
| 25 | M&L for Sheet Glass, 3.00mm thick Figured glass, pinhead type in squares n exc 0.5 sqm each pane complete all as specified and directed. |
| 26 | S & F Box type Steel windows and ventilator with double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing. Steel window shall be conforming to relevant IS complete all as specified and directed. |
| 27 | S&F in Repair window blinds of approved shade, design and size, complete with aluminium top channel/roller tube, side brackets, operating mechanism, bottom rail, control chain/cord, all fittings and accessories, fixed to wall or ceiling complete all as specified and directed. |
| 28 | M&L for Preparation of new steel and iron surfaces of any description over 10 CM width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed. |
| 29 | M & L for applying two coat of synthetic enamel paint on new wooden surfaces over a coat of pink primer of any description over 10 cm width or girth complete all as specified and directed. |
| 30 | S&F 100mm long Butt Hinges extruded aluminium alloy with Galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed. |
| 31 | S&F 150mm long Extruded aluminium alloy Handles, fabricated type, anodisedcomplete all as specified and as directed. |
| 32 | S&F for 125mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed. |
| 33 | S&F in repair 125mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed. |
| 34 | S&F 200mm long Aluminium anodised, barrel Tower Bolts of extruded section and fixed complete all as specified and directed. |
| 35 | S&F in repair 200mm long Aluminium anodised, barrel Tower Bolts of extruded section and fixed complete all as specified and directed. |
| 36 | S&F in repairs 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 37 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 38 | S&F 100mm long Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 39 | S&F in repair 100mm long Aluminium anodised Hasp and staple incl bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 40 | S&F in repair, cast iron body Door Closer Hydralically regulated designation No 3 universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed. |
| 41 | S&F for galvanised stainless steel wire cloth, 0.56 mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed. |
| 42 | S&F in repair galvanised stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed. |
| 43 | S&F Anodised aluminium Powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 44 | S&F powder coated aluminium window and ventilator shutters, sliding/openable/fixed (as per required at site) type without sash bar, alu section weighing 0.55 kg/m, including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised aluminium snap beading screws etc complete all as specified and directed. |
| 45 | S&F aluminium power coated door shutters (sliding/openable/fixed (as per required at site) , aluminium section weighing 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. |
| 46 | S&F for sheet glass palin/coloured (as per directed by Engr-in-charge) 5.5mm mm thick best quality and glazing with rubber packing, screws or glass putty in squares exc 0.5 Sqm each pane complete all as specified and directed. |
| 47 | S & F for stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.40mm & fixed with tacks or screws, wire staples, etc complete all as specified and directed. |
| 48 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 49 | Taking down shutters of any description from the frames and refixing in the same opening after repair of door rescuring or easing & adjusting etc,area exc. 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and directed. |
| 50 | Repairs to Aluminium doors exc 1.50 Sqm but n exc 5.00 Sqm by necessary joining cleat, glazing clips, rubber neoprene packing handles 2 Nos in each doors, hinges anodised aluminium snap beading screw etc including chowkhat and refix in the same opening after complete repair except glass complete all as specified and directed. |
| 51 | S&F Door seal at all levels approved quality EPDM/PVC/rubber door seal strip of suitable size on wooden/steel/aluminium door shutter frame complete with screws, adhesive and all necessary fittings to ensure proper sealing against dust, air, sound and insect entry, complete all as specified and directed. |
| 52 | S&F in repair for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 53 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed. |
| 54 | S&F aluminium anodised snap grid ceiling of frame size 605 x 605mm, main Tee section of size 36.5 mm x 25 mm x 1.4 mm thick, cross Tee section of size 23.5 mm x 26.4 mm x 1.4 mm thick, supported at ends all along the wall with aluminium anodised angle of size 40 mm x 25 mm x 2 mm thick and 4mm dia GI suspenders Hangers 4 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 55 | M&L for 06 mm thick non asbestos fibre cement building boards (size 600X600mm) fixed or laid / inserted to timber / GI / Aluminium frames work with screws as in ceiling flat or sloping incl refixing in position of electric wiring, lights and fittings etc, complete all as specified and directed. |
| 56 | M & L for POP 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed. |
| 57 | S & F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre /intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section of 0.55mm thickness having kurled web of 50mm and flange of 26mm each lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete size of grid 605 x 605mm complete all as specified and directed. |
| 58 | S&F in repair PVC sheet wall lining consisting of 5mm thick colour / printed PVC sheet inclusive of solvent cement and fixing at site including PVC frame as per specifications, complete all as specified and directed. |
| 59 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing coat, complete all as specified and directed. |
| 60 | Demolition of cement concrete (unreinforced) of any descriptions, in Ground floors (Floor Topping, Sub Base etc) not exc 150mm thick, above or below ground level complete all as specified and directed. |
| 61 | M & L Cement concrete type B-0, 1:2:4 (12.5 mm graded crushed stone aggregate) 25mm thickness as in floor for laying tiles brushing with neat cement slurry @ 3.00 Kg/Sqm complete all as specified and directed. |
| 62 | M&L for Non-skid Coloured Designer Ceramic Tiles (Square/rectangular) area of each tile exceeding 0.11 sqm but nexc 0.18 sqm, 7-8mm thick in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bedding layer of 15 mm thick in CM 1:6, complete all as specified and directed. |
| 63 | M&L for Non-skid Coloured Designer Ceramic Tiles (Square/rectangular) area of each tile exceeding 0.11 sqm but nexc 0.18 sqm, 7-8mm thic on vertical surfaces such as dados, skirtings and risers to steps, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:3 on masonry/ concrete surfaces complete all as specified and directed. |
| 64 | M & L for Glazed coloured ceramic tiles in vertical surface 350x 250x7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thk rendering in CM 1:3, complete all as specified and directed. |
| 65 | M & L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified and directed. |
| 66 | M&L for Vitrified ceramic tiles 10mm thick (square or rectangular) polished area of each tile not exceeding 0.36 sqm , in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 67 | Demolition of stone slabs of any description or thickness in kitchen platform, floors,aprons laid, bedded,pointing in any mortar etc complete all as specified and directed. |
| 68 | Material & labour for 18mm to 20mm thick marble stone(of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm screed bed in CM 1:4 complete all as specified and directed. |
| 69 | M&L Granite slab 16 to 18mm thick as in pillas, window cill, cooking platform and the like in cement motar 1:4 including painting in white cment 1:2 using marble dust with a mixture of pigment to match the shade of granite including cutting polishing and moulding on edges complete all as specified and directed. |
| 70 | M&L machine cut Kota stone slab flooring 18-20mm thick, laid over and incl 15mm thick cement screed /rendering in CM 1:6 ,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, gridding and polishing to achive mirror finish complete all as specified and directed. |
| 71 | M&L machine cut Kota stone slab in riser of steps,skirting,dado and pillar, 15mm thick, mixed with pigment to match the shade of the slab incl 10mm thick cement screed /rendering in CM 1:4 incl cutting, rubbing, gridding and polishing to achive mirror finish complete all as specified and directed. |
| 72 | Demolition of brick work or stone masonry built in cement mortar including all quoines arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and directed. |
| 73 | M&L brick work with sub class B bricks straight or curved on plan exc 6m radius in CM 1:6 complete all as specified and as directed. |
| 74 | All as per ser item no 73 abovw but except bricks |
| 75 | M&L for brick work with sub class B bricks straight or curved on plan to any radious in half brick thick built in CM 1:4, complete all as specified and directed. |
| 76 | Taking down cement plaster of any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off complete all as specified and directed. |
| 77 | M&L for rendering 10mm thick CM 1:6 on fair faces of brickwork or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed. |
| 78 | M & L for Rendering 15mm thick in cement mortar 1:4 on other than fair faces of Brick walls or on concrete surfaces plastered surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 79 | M&L for Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and directed. |
| 80 | M & L for preparation of new plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer over a coat of 3mm thick wall care putty complete all as specified and directed.Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 81 | M&L for 2-3mm thick wall care putty on wall in Single/double coat as per requirement complete all as specified and directed. |
| 82 | M & L Preparing New Surfaces of Walls and applying two coats of Cement base paint complete all as specified and as directed. |
| 83 | M & L for preparing new plastered surfaces of ceiling and applying two coats of oil emulsion distemper complete all as specified and directed.Note: (i) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 84 | M & L for two coats of white wash on newly plaster surfaces of ceiling incl preparation of surfaces complete all as specified and directed. |
| 85 | Supply only Integral Water Proofing compound, complete all as specified and directed. |
| 86 | Disconnecting existing water tanks exc 250 & n.exc 500 Ltr capacity , setting aside (or lovering if required ) and cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes and reconnecting and re-fixing in position complete all as specified and directed. |
| 87 | Disconnecting existing water tanks exc 500 & n.exc 1000 Ltr capacity , setting aside (or lovering if required ) and cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes and reconnecting and re-fixing in position complete all as specified and directed. |
| 88 | Taking up or down 15mm bore of steel tubing with connections for cleaning for refixing or removing to store/yard complete all as specified and directed. |
| 89 | S&F for steel water tubing of nominal bore 15mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed. |
| 90 | Fixing only water tubes of 15mm dia of any grade to walls and ceiling or laying in floor, complete all as specified and directed. |
| 91 | Taking up or down 20mm bore of steel tubing with connections for cleaning for refixing or removing to store/yard complete all as specified and directed. |
| 92 | M&L for steel water tubing of nominal bore 20 mm, medium grade galvanised with all fittings including short lengths, laid in trenches complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed. |
| 93 | Fixing only water tubes of 20mm dia of any grade to walls and ceiling or laying in floor, complete all as specified and directed. |
| 94 | Cuttings chases for concealed water tubing of concealed conduit (cutting n.exc 10 cms girth) and making good in CM ( 1:3) in brick walls complete all as specified and directed. |
| 95 | Dismantling and removing to water storage tanks of capacity exceeding 250 ltrs but not exceeding 500 ltrs and removing to stores complete all as specified and directed. |
| 96 | Dismantling and removing to water storage tanks of capacity exceeding 500 ltrs but not exceeding 1000 ltrs and removing to stores complete all as specified and directed. |
| 97 | S&F in repair for 500 ltrs capacity rotational moulded polythylene water storage tank trippled layer(Cylindrical vertical with closed top) hoisted including ball, brass valve 20mm high pressure with polythylene float and fly nuts screwed for iron pipes, complete all as specified and directed. |
| 98 | S&F in repair for 1000 ltrs capacity rotational moulded polythylene water storage tank trippled layer (Cylindrical vertical with closed top) hoisted including ball, brass valve 20mm high pressure with polythylene float and fly nuts screwed for iron pipes, complete all as specified and directed. |
| 99 | S & F in repairs, 15 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms complete all as specified and directed. |
| 100 | Supply and fixing in repairs for 20 mm bore of Ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe (weight not less then for 210 gms) complete all as specified and directed. |
| 101 | S&F in repairs 25mm dia Harrison rails, stainless steel, chromium plated with fixing brackets, stops, rollers, end caps etc complete all as specified and directed. Note :- Quality of all connecting items shall be approved by GE. |
| 102 | Supply and fixing in repairs Gun-metal, globe or gate valves of 20mm bore with half turn lever arm /iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 103 | S&F in repairs, for plate rack made of stainless steel 0.63 mm thick of size 600 X 750 mm fixed to wall with and incuding angle iron brackets of suitable size grouted in cement concrete, complete all as specified and directed. |
| 104 | S&F in repairs, sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 105 | Supply and fixing in repairs tank cover black/white (with treaded arrangement for locking) of water storage tank of any capacity complete all as specified & directed. |
| 106 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coveringsTreaded complete all as specified and directed. |
| 107 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 108 | S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, hips, valley gutter, drip and straight flashing fixed with self tapping screws complete all as specified and directed. |
| 109 | Dismantling wrought iron or mild steel work of any description not otherwise provided for roof covering parline, rafter etc complete all as specified and directed. |
| 110 | S & F rolled mild steel in roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections)incl distance pieces, cleats, etc conforming to grade Fe-410W-(Gde E-250 Quality A) complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender