Tender For Repair To Joinery, Flooring & Fixtures At Mm Rd, Arjun Marg, Kohima Line, Pg Rd, Comd Mt, Shivnery C , Milkha Singh, 752 Tpt Coy, Ssag, Sfc And Other Variour Nearby Locations In The Area Of Age B/R (Central) Under Ge (N) Pune
Tender Value
35 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
11 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Joinery, Flooring & Fixtures At Mm Rd, Arjun Marg, Kohima Line, Pg Rd, Comd Mt, Shivnery C , Milkha Singh, 752 Tpt Coy, Ssag, Sfc And Other Variour Nearby Locations In The Area Of Age B/R (Central) Under Ge (N) Pune
BOQ
| Sl. No. | Item Description |
| 1 | M&L for double charged vitrified tiles 8 to 10 mm thick (square/rectangular) polished, area of each tile exc. 0.18 sqm not exceeding 0.36 sqm, in flooring etc , laid over and including screed bed of 15 mm thick in cement mortar (1:4) and jointed in neat cement slurry and pointed in white or coloured cement to match shade including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish from the premises complete all as specified and directed. |
| 2 | M&L for double charged Vitrified ceremic tiles 08 to 10 mm thick of approved shade and size as in vertical surfaces, skirting etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match shade over and including backing coat of 10mm thick in cement mortar 1:3 including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish from the premises complete all as specified and directed. |
| 3 | Dismantling Single layer Manglore Pattern or similar tiles in roofing and rubbish off the premises complete as as specified and as directed |
| 4 | Material and labour for roof tiles Manglore pattern interlocking at side joints, laid dry in roofing complete all as specified and as directed. |
| 5 | Ditto- all as per serial item No 4 here-in-before but using Mangalore pattern roof tiles obtained from dismantling. |
| 6 | Material and labour for ridge or hip tiles to suit Manglore pattern of roofing tiles,bedded and jointed in cement mortar (1:4) etc complete all as specified and as directed. |
| 7 | Material and labour for second class hard wood cover fillets, rectangular or triangular in section, clean sawn, secured with fevicol and nails, sectional area exc. 6 Sq.cm but not exc. 13 Sq.cm including dismantling complete all as specified and as directed. |
| 8 | Material and labour for second class hard wood cover fillets, bull nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails, sectional area exc. 3 Sq.cm but not exc. 6 Sq.cm including dismantling complete all as specified and as directed. |
| 9 | Dismantling plain or corrugated steel sheeting , any gauge or any thickness, as in roof coverings complete all as directed. |
| 10 | Supply and fix 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with 'J' Bolts and washers, in roofs, walls etc with grade of zinc coating 120gms/ Sqm complete all as specified and as directed. |
| 11 | Supply and fix in repairs 0.56mm thick plain, Aluminium sheeting, alloy 31000H4 in ridges, hips, valley gutter, crumple joint, drip and straight flashing (length and girth as fixed) complete all as specified and as directed. |
| 12 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed. |
| 13 | M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base including demolition of existing PCC and removing rubbish off the premises complete all as specified and directed. |
| 14 | M&L for 25mm thick coloured glossy rubber moulded chequered cement concrete tiles with grey cement & pigment of area exc. 0.08 Sqm and n.exc 0.16sqm each, set, jointed and pointed in net cement slurry mixed with grey cement and pigment in floors including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes including dismantling of existing complete all as specified and as directed. |
| 15 | M&L for machine pressed precast cement concrete interlocking paver block, coloured glossy any shape and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 with grey cement and pigments in floor/ pavement laid over and including 25mm thick sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles including dismantling existing tiling, cement mortar bedding (but not backing), rubbish off the premises complete all as specified and as directed. |
| 16 | M&L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06Sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including screed bed of 15 mm thick cement mortar 1:4 including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed. |
| 17 | M&L for Glazed coloured ceramic tiles in vertical surface 300mmx450mmx7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including backing coat of 10 mm thick in cement mortar 1:3 including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed. |
| 18 | M&L for coloured glazed ceramic tiles of size 600mm x 300mm x 7 to 8mm thick of colour and pattern as approved by GE, as in vertical surface, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar 1:3 including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premisescomplete all as specified & directed. |
| 19 | M&L granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like over and including 15 mm thick screed bed of CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade including dismantling of existing stone slabs/ tiles of any description or thickness laid bedded and pointed in cement mortar and removing rubbish off the premises complete all as specified and as directed. |
| 20 | M&L for Machine cut cudappah stone slab 20 to 25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of existing stone slabs/ tiles of any description or thickness laid bedded and pointed in cement mortar including dismantling of existing cudappah stone and removing rubbish off the premises complete all as specified and as directed. |
| 21 | Labour only for full round moulding to 18 to 20mm thick granite slab all as directed by Engineer-in-Charge. |
| 22 | M & L Machine cut kota stone 20-25 mm thick over cement screed base laid and Jointed with Grey cemnet slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (mirror polish) as in flooring / steps /slabs over and including 15 mm screed in CM (1:4) including dismantling of existing stone slabs /tiles of any description or thickness laid bedded and pointed in cement moratr and removing rubbish off the premises complete all as specified and as directed. |
| 23 | Supply and fix in repair fibre glass reinforced translucent corrugated/Plain sheeting 2.00 mm thick fixed with coach screw and washer in roof, wall etc. complete all as specified and as directed. |
| 24 | M&L 75 mm thick plain cement concrete (1:3:6) type C-2 using 20mm graded stone aggregates as in plinth protection, concrete shall be laid in alternate bays not exc 3.0m in length, finished even and fair including demolition of existing cement concrete removing rubbish off the premises complete all as specified and as directed. |
| 25 | M&L Brick work with fly ash old size bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar 1:6 including demolition of brickwork built in cement mortar and rubbish off the premises complete all as specified and directed. |
| 26 | M&L for pre-cast cement concrete block masonry with solid blocks exc10 cm in width, type C-1,1:3:6 (using 20mm graded stone aggregate) and setting in cement mortar 1:6 including demolition of existing complete all as directed |
| 27 | M&L for rendering 10mm thick in CM (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement with sagol finish including taking down cement plaster on brick/ stone wall , raking out joints, hacking for key scrubbing down with water etc. and removing rubbish off the premises complete all as specified and as directed. |
| 28 | M&L for 15mm thick cement plaster in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement with sponge finish using water proofing compound @3% or as per manufactuer's instructions and taking down cement plaster on brick/ stone wall including raking out joints, hacking for key scrubbing down with water etc. and removing rubbish off the premises complete all as specified and as directed. (Note: Waterproofing compound shall be measured and paid separately under relevant item as supply only). |
| 29 | Supply only liquid water proofing compound make pidicrete of pidilite /cement mix plus of berger complete all as specified and as directed. |
| 30 | M&L for preparation of new plastered surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over a coat of primer on wall complete all as specified and as directed by Engineer-in-charge. |
| 31 | Material and labour for preparation of New plastered wall surface and applying two coats of oil emulsion distemper over a coat of alkali reistant primer over a thin layer (1 to 1.5mm) complete all as specified and as directed. |
| 32 | Material and labour for removing of plants, bushes, weeds with roots from walls, roof, chajja, canopy, parapets, roof kerbs, around water tanks, stagings, outlets junctions of water pipe lines , waste water pipe, bends of area n exc 1.5 Sqm each and filling the disturbed area with cement concrete (1:1.5:3) or cement mortar (1:3) using water proofing compound as per manufacturer's instruction and making the patch finished as per surroundings complete all as specified and as directed. (Note: Rate quoted is deemed to be included for scaffolding, safety measured required for working on or up to height of 15 metres vertical slopes) |
| 33 | M&L for complete removal of existing treatment on walls using steel wire brush, sanding machine, rubbing with emery papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces plastered or unplastered surfaces to receive new finish complete all as specified and directed. |
| 34 | M&L for complete removal of existing treatment on ceilings using steel wire brush, sanding machine, rubbing emery papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces plastered or unplastered surfaces ready to receive new finish complete all as specified and directed. |
| 35 | M&L for applying wall care putty 1 to 1.5 mm thick on walls surfaces complete all as specified and as directed. |
| 36 | M&L for applying wall care putty 1 to 1.5 mm thick on celing surfaces complete all as specified and as directed. |
| 37 | M&L for two coats of Oil Bound distemper of approved tint on wall surfaces complete all as specified and as directed. |
| 38 | M&L for two coats of Oil Bound distemper of approved tint on ceiling surfaces complete all as specified and as directed. |
| 39 | Preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of acrcylic distemper complete all as specified and as directed. |
| 40 | Preparation of old treated plastered/ false ceiling surface of ceiling by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty to fill holes, nail spots etc. required, smoothen surface by sand paper and applying one coat of acrcylic distemper complete all as specified and as directed. |
| 41 | M&L for preparation of old surfaces of wood and wooden based material of any description over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed. |
| 42 | M&L for preparation of old painted steel surfaces of any description over 10 cm girth or width and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 43 | M&L for preparation of old painted wooden/asbestos surface in ceiling and applying one coat of synthetic enamel paint |
| 44 | Preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty to fill holes, nail spots etc. required, smoothen surface by sand paper and applying two coats of lustre paint of ASIAN paint or equivalent of Berger/ Nerolac complete all as specified and as directed. |
| 45 | Preparation of old treated plastered surface of ceiling by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty to fill holes, nail spots etc. required, smoothen surface by sand paper and applying two coats of lustre paint of ASIAN paint or equivalent of Berger/ Nerolac complete all as specified and as directed. |
| 46 | Preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or equivalent make , removing loose paints etc , removing nails etc and make good surface by applying white birla/JK wall putty to fill holes, nail spots etc. required, smoothen surface by sand paper and applying two coat of texture paint complete all as specified and as directed. |
| 47 | Material and labour for scrapping out old treated wooden surfaces in floors, staircase etc ,sanding the surfaces using sanding machine, application of pigment and hardener to desired colour and finally applying two coats of melamine polish with spray guns, compressor etc complete till glossy surface is obtained complete all as specified and as directed. |
| 48 | All as per serial item No.47 here-in-before but as in wooden doors, window and wall paneling. |
| 49 | M&L for preparation of old treated surfaces of wall and applying two coat of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/shalimar) to, roof parapet wall surface, floor etc complete all as specified and as directed. |
| 50 | Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete including dismantling Corrugated, Semi corrugated etc. sheets complete all as specified and as directed. |
| 51 | Material and labour for 7-8 mm thick PVC prelaminated Gypsum board false ceiling board on and including GI powder coated grid work of size 595 mm x 595 mm with using 32.0 mm x 20 mm x 1.5 mm thick main tee, 23.5 mm x 23.5 mm x 1.28 mm cross tee and 25 mm x 25 mm x 1.5 mm angle fixed to wall for false ceiling including necessary supporting hanger with 2.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, size of grid shall be 600 mm x 600 mm including dismantling of existing board complete all as specified and as directed. |
| 52 | M&L for 10 mm thick Gymsum board (mositure resistant) seamless as in the ceiling/ linning fixed with counter sunk screws on and incl GI channels frame work of stardard section as per manufacture,s instructions, fixed @ 1.2 m in one direction and 45 cm in center to center in other direction with necessary fixing arrangmentat their junction point at desired heights below roof slab and incl two coats of plastic emulsion paint over a coat of primer on exposed surfaces. (The frame work shall be fixed with the help of GI suspenders of suitable size with the help of dash fasteners and along wall, making good disturbed surfaces, smoothening the gypsum board, POP lining at joints as required) including dismantling of existing board complete all as specified and directed. |
| 53 | M&L in repairs for POP cornices of approved size and shape for seamles false ceiling incl necessary hanging arrangments atc complete all as specified and directed. |
| 54 | S&F in repair for 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof, fixed with L-type or J-type or cranked hook bolts etc. complete all as specified and as directed. |
| 55 | S&F in repair for 6mm thick asbestos cement, two piece adjustable serrated ridge for corrugated or semi corrugated sheets fixed with L-type or J-type or cranked hook bolts etc. complete all as specified and as directed. |
| 56 | Dismantling structural steel work including doors, gates, framed truss etc. complete all as specified and as directed. |
| 57 | Supply and fix mild steel work in tubular trusses including special shaped washer etc. complete using hollow mild steel sections round, square or rectangular for structural use as in main and cross beams, hip and jack rafters, purlins conforming to IS 4923:1997 fixed with angle cleats or other connecting plates complete all as specified and as directed. |
| 58 | M&L for mild steel framed work such as grill, gate etc with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed. |
| 59 | M&L Mild steel work of angle, channel plates etc as in framed roof truss , purlins brackets etc including bending and welding angles,bolts as necessary, gusset plates, riveting, etc , conforming to Fe 290 Gde-E-165 complete all as specified and as directed. |
| 60 | M&L for preparation of new steel surfaces of any description over 10cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 61 | Taking down shutters of any description area exc 1 Sqm but not exc 4 Sqm and refixing in same opening including easying adjusting and refixing builders hardware as required including renewal of unserviceable screws, welding etc complete all as specified and as directed. (Renewal of builder's hardware if specially ordered shall be measured and paid for separately) |
| 62 | Supply and fix in repair for powder coated aluminium door shutters, aluminium section weighing not less than .55kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, 150mm handles 2 Nos in each shutter,200mm tower bolt 01 No in each shutters, 100mm 03 Nos stainless steel hinges in each shutter, anodised aluminium snap beading screws etc complete all as specified and as directed. |
| 63 | Supply and fix in repair for aluminium powder coated partition using ‘Jindal’ aluminium SP/ DP section or equivalent make as specified with 5mm thick tinted glass, PVC rubber beading,12mm thick prelaminated particle board fixed with glazing clips etc complete all as specified and as directed. Sections : SP (Single partition) - 20033, DP (Double partition) - 20034,Glazing clips - 4407 |
| 64 | Supply and fix in repair aluminium powder coated louvered ventilator using rectangular tube of size 63.50 x 25x 1.5 mm with provision of space for exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed. |
| 65 | Supply and fix in repair aluminium powder coated three track sliding window with two glazed shutters, with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604. |
| 66 | M&L for GI tubing 15mm bore medium grade with all fittings & fixed complete to walls & ceiling or laid in floors including taking up or down steel tubing and connections complete all as specified and as directed. |
| 67 | M&L for GI tubing 20mm bore medium grade with all fittings & fixtures complete laid in trenches fixed including taking up or down steel tubing and connections complete all as specified and as directed. |
| 68 | S&F in repair 5 mm thick float glass looking mirror decorative type of size with 6 mm thick ply wood backing and 1st class hard wood frame including french polish all as specified and as directed. |
| 69 | S&F in repair brackets for drapery/ curtain rod, decorative type, of stainless steel as per sample kept in GE (N) Pune office complete all as specified and as directed. |
| 70 | S&F in repair decorative head for drapery/ curtain rod 25 mm dia of stainless steel complete all as specified and as directed. |
| 71 | S&F in repair for drapery/ curtain rod of 25mm dia, decorative type, of stainless steel complete all as specified and as directed. |
| 72 | S & F in repair 18 mm thick HDHMR board (glossy finish) duly edge banded with 0.8 mm thick PVC taping, as in cup board shutters, including taking down existing plywood. design and colour shall be as approved by GE complete all as specified and directed. |
| 73 | Material and labour for 18mm thick plywood, grade BWR, type BB, number of ply 14 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern including taking down existing plywood complete all as shown on drawing and as directed. |
| 74 | Material and labour for 12mm thick plywood, grade BWR, type BB, number of ply 2Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern including taking down existing plywood complete all as shown on drawing and as directed. |
| 75 | Material and labour for 6mm thick plywood, grade BWR, type BB, number of ply 2Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern including taking down existing plywood complete all as shown on drawing and as directed. |
| 76 | Material and labour for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer’s instruction complete all as specified and as directed. |
| 77 | S&F in repair stainless steel auto close/ hydraulic hinge of size 50 mm suitable for shutter of not exc 0.50 sqm area complete all as specified and as directed. Make Prayag Cat No. 5120 or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed. |
| 78 | S & F Stainless steel handle of 75 mm size (moduler selected quality of design as approved) fixed with self tapping screw all as specified and directed by Engr-in-Charge |
| 79 | S&F in repair stainless steel hinge 50 mm long for cupboard shutter fixed with Self Tapping screws complete all as specified and as directed. |
| 80 | S&F in repair 75 mm long stainless steel handles for cupboard shutter fixed with Self Tapping screws complete all as specified and as directed. |
| 81 | M&L for smartcare bathroom waterproofing triple layered (polypropylene- polyethylene-polypropylene) membrane 550 micron thickness, approx. weight 280gms/sqm over toilet floor fixed using smartcare tile adhesives as per manufacturer's instructions complete all as specified and as directed. Make: Asian or equivalent of burger/ pidilite complete all as specified and as directed. |
| 82 | S&F for rotational moulded polythelene water storage tanks 3 layer white colour water tank non toxic effect,algea formation protection (made from virgin grade of polyethylene material which is duly stablized with anti-oxident plastic) of capacity 1000 litres, (cylindrical vertical one piece moulded with closed top),the internal and external surfaces of tanks are smooth,clean and free from any hidden internal defects, hoisted and fixed in postion including S & F necessary GI fittings,inlet/outlet washout,overflow pieces long nipples,checknuts & washer,20mm dia PTMT valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball and 20 mm brass stop cock etc complete all as specified and as directed. |
| 83 | -Dito- all as per item No 82 here in before but 500ltr capacity |
| 84 | Supply and fix in repairs vitreous china coloured wash down water closet (pedestal / wall mounted Type) cascade type ‘P’ trap or 'S' Trap, in built seat cover and flushing cistern, low level, valveless, symphonic action type complete with inlet ball valve, float and handle complete all as specified and as directed. Make :- Hindware , catalogue No. 20028/20024 Constellation, 21038 cistern, pastel (complete set) or equivalent from Cera/Parryware. Note :- If Cat No. is revised, equivalent cat No. from latest catlauge shall be considered. |
| 85 | S&F in repairs Vitreous China wash down water closet pan EWC (P or S Trap) white, including trap connection to drain (outgoing pipe) and to flushing pipe, PVC connections 15mm size with PTMT nuts of length 600mm, antisyphonage pipe and plastic water closet seat of white in colour, back closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed. |
| 86 | S&F in repairs vitreous China squatting pan ‘Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern) including connection to trap and to flushing pipe, anti-syphonage pipe etc& making good to floor, trap set in con crete complete all as specified and as directed. |
| 87 | S&F in repair Vitreous china Urinal, full stall type, white with waste pipe and CP brass spreader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe including Cp Urinal spreader for fixing with 15 mm dia pipe complete all as specified and as directed Make - Cera, Cat Part-S4020104 (Ivory) or equivalent |
| 88 | S&F in repair vitreous china wash hand basin white of bowl size 550 x 400mm incl waste coupling and PVC waste pipe, 32mm dia, fixed with and incl M S brackets complete all as specified and as directed. |
| 89 | S&F in repair dual flush 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified. |
| 90 | S&F in repairs Two Way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified and as directed Make Cera Cat Part No F 1019161 CHROMO SERIES or equivalent of make as per Appx 'A' as approved by GE. |
| 91 | S&F in repair Cabinet mirror plastic body for toilet of size 350x450mm with 4mm thick looking mirror complete all as specified and as directed |
| 92 | S&F in repair glass shelf 450mm X 150mm X 8 mm thick with chromium plated railing fixed with and including chromium plated brackets complete all as specified and as directed. |
| 93 | S&F in repair corner glass shelf of size 300mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed. |
| 94 | S&F in repair 600mmx450mm beveled edge looking mirror of selected quality glass of thickness not less than 5.50mm, itched desined corners, fixed to wall with 12mm dia spacers at each corners, all as specified. |
| 95 | S&F in repairs hand shower chromium plated (health faucet) 15 mm bore, (ABS body) with 8mm dia. 1.20 metre long spirochrome flexible tube & wall hook, Cat No. F8030401AB of make Cera or equivalent of make as per Appx 'A' as approved by GE. complete all as specified and as directed. |
| 96 | S & F in repair brass Chromium plated soap dish , fixed to wall with CP brass screws, all as specified and directed. Make: Cera Cat part No: F5006106 or equivalent of make as per Appx 'A' as approved by GE. |
| 97 | S & F in repair Chromium plated towel rail size- 600mm all as specified and directed. Make: Cera Cat part No: F5007103 or equivalent of make as per Appx 'A' as approved by GE. |
| 98 | S&F in repair Brass Chromium plated towel ring all as specified and directed. Make: Cera Cat part No: F5002105 or equivalent of make as per Appx 'A' as approved by GE. |
| 99 | S&F in repairs Pillar taps Swan Neck suitable for 15mm bore pipe long body fancy type CP with Capstan head screwed down screwed for iron pipe or brass ferrule quarter turn (Right) complete all as specified and as directed Cat Part No QT F2006105 of Cera Ocean SERIES or equivalent of make as per Appx 'A' as approved by GE. |
| 100 | S&F in repairs wall 3-in-1 mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Cera Cat Part No F1019403 CHROMO SERIES or equivalent of make as per Appx 'A' as approved by GE. |
| 101 | S&F in repair angle cock with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified and as directed Make: Cera Cat Part No F1019201 CHROMO SERIES or of equivalent make as per Appx 'A' as approved by GE. |
| 102 | S&F in repair cast copper alloy CP shower arm 225mm long with flange complete all as specified and directed by Engr-in-charge. Make : Prayag: Cat Part No BOS-49 or equivalent of make as per Appx 'A' as approved by GE. |
| 103 | S&F in repair chromium plated overhead shower rose 200 mm size square (without arm) with swivel joints including fixing arm/ pipe complete all as specified and as directed Make Cera : Cat Part No F7010507AB or equivalent of make as per Appx 'A' as approved by GE. |
| 104 | S&F in repair Toilet paper holder of stainless steel, all as specified and directed. Make: Cera Cat part No: F5002109 or equivalent of make as per Appx 'A' as approved by GE. |
| 105 | S&F in repairs Center hole basin mixer brass chromium plated quarter turn and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Cera Cat Part No F1003461 TITANIUM SERIES or equivalent of make as per Appx 'A' as approved by GE. |
| 106 | S&F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including 32mm dia waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 780mm x 4100mm x 210 mm, bowl size 380mm x 330mm x 210mm complete all as specified and as directed Make Cera, Series- Bella, Cat Part No. B4722502 (pearl finish) or equivalent of make as per Appx 'A' as approved by GE. |
| 107 | S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including 32mm dia waste pipe and CP grating and bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mmx160mm bowl size 410mm x 330mm x 160mm all as specified. |
| 108 | S&F in repairs stainless steel plate rack of size 609mm X 762 X 254 mm all as specified CAT PART NO:- P-330 of Pryag or equivalent of make as per Appx 'A' as approved by GE. |
| 109 | S&F aluminium door seal up to 1200mm length best quality complete complete all as specified and as directed |
| 110 | S&F in repair aluminium die cast body Door closer hydraulically regulated designation No 2, universal type suitable for door shutter of 701 to 850 mm in width and of weight between 36 to 60kg ISI Marked complete all as specified and as directed |
| 111 | S&F in repair 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4, complete all as specified and as directed |
| 112 | Supply and fix in repair for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 113 | Supply and fix in repair for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 114 | Supply and fix in repair for PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed. |
| 115 | Supply and fix in repair for PVC (SWR) bends any radius of 110mm bore complete all as specified and as directed. |
| 116 | S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as specified. |
| 117 | S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as specified. |
| 118 | M&L for 2nd class softwood palin fillets, squar/rectangular in section, clean sawn, secured with nails or brads sec exc 13 sqcm but n exc 25 sqcm including dismantling of existing complete all as specified and directed. |
| 119 | M&L for 12mm thick plywood, grade BWR,type BB, number of ply 07 nos, fixed with fevicol and nails for working table/storage almirah to the size and pattern fixed with wooden frame work, including taking down existing plywood complete all as directed |
| 120 | S&F for 4mm thick laid of 3 No of ply veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face fixed with screws to timber frame work complete all as directed |
| 121 | Supply and fix in repair 10 to 12 mm thk AC borad as in eaves board and simillar work at height exc. 10 m and not exc 15 m including two coats of synthetic enaml paint over a coat of primer complete all as specified and directed. |
| 122 | labour only for Mirror polishing on marble/ granite/ Kota stone/ stone work by machine grinding where ever required to give high gloss finish complete. |
| 123 | M & L for preparing surface of previously treated concrete , plastered surface , kerb stone & applying two coat of synthetic enamel paint complete all as specified. |
| 124 | Taking down chowkats or frames not exc.1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed |
| 125 | Ditto- all as per Item No.124 above but exc. 1.5 sq. m but n exc 4 sqm each complete all as specified and directed |
| 126 | Taking down the shutter of size exc. 2 sqm each complete and refxing again in same opening after complete all as specified and directed |
| 127 | Taking down the shutter of size exc 1.00 sqm but n exc 2.00 sqm each complete all as specified and directed |
| 128 | Taking down the shutter of size n.exc 1.00 sqm each complete all as specified and directed |
| 129 | S&F Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 50 mm x 47mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. |
| 130 | S&F Factory made 100 % solid wood plastic composite(WPC) door frame, double rebate 50 mm x 125 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. |
| 131 | S&F 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 30X6mm all around the shutters complete including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and directed. |
| 132 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a VC sheet strip of 20mm width stuck inside with solvent cement for stiles and lain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. all as specified and directed by Engineer-in-Charge. |
| 133 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, ater/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: 1.stainless steel butt hinges and necessary S Sscrews shall be paid separately 2. All screws shall be self tapping and length of Screw not less than 50 mm. ) |
| 134 | Supply and fix second class hard wood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats. |
| 135 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified |
| 136 | S&F in repair Stainless steel sliding door bolts, plate type, bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250 mm long( selected quality as approved ) complete all as directed and specified. |
| 137 | S&F in repair Stainless steel Tower Bolt of 200 mm long ( selected quality as approved ) fixed with Self Tapping screws complete all as directed and specified. |
| 138 | S&F in repair Stainless steel Handle of 150 mm long ( selected quality as approved ) fixed with Self Tapping screws complete all as directed and specified. |
| 139 | S&F in repair floor door stopper of Stainless steel body and tongue 135 mm anodised with hard drawn steel spring fixed in floor complete all as directed and specified. |
| 140 | S&Fin repair 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed complete all as directed and specified. |
| 141 | S&F in repair brass Tower Bolt of 200 mm long ( selected quality as approved ) fixed with Self Tapping screws complete all as directed and specified. |
| 142 | S&F in repair brass sliding door bolts, plate type, bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250 mm long( selected quality as approved ) complete all as directed and specified. |
| 143 | S&F in repair brass Handle cost type polished of 150 mm long ( selected quality as approved ) fixed with Self Tapping screws complete all as directed and specified. |
| 144 | S&F in repair floor door stopper of brass type polished and tongue 150 mm anodised with hard drawn steel spring fixed in floor complete all as directed and specified. |
| 145 | S & F in repairs Magnetic and connected plate to shutters and frame complete all as specified and directed. |
| 146 | S&F in repair white counter top Basin (self-rimming) 615mm x 365mm x 120mm fixed in position including waste coupling and PVC waste pipe, 32mm dia. complete Make: Cat Part No – S2020191or of equivalent make as per Appx 'A' as approved by GE. |
| 147 | Supply and fix in repair SS square grating 5\\"x5\\"mm size and thickness 0.8 -1mm of grade SS 304 with/without hole complete all as specified. |
| 148 | S&F in repair 3mm thick sheet glass ordinary quality in any type of frames and glazing with oil putty (or beading) in square n. exc. 0.5 Sqm in each pane including hacking out old broken glass from wooden/steel frames complete all as specified and as directed |
| 149 | M&L for preparation of external surfaces of walls and appying two coats of chemical water proofing treatment on wall/chajja terrace and parapet walls,grooves etc. such as, CEMISTIK PU50 heavy Duty waterproofing coating or equivalent complete all as per manufacturer instruction as directed |
| 150 | M&L for preparation, cleaning of any type sunken portion area not exc 1 sqm applying a coat epoxy resin water proofing chemical treatment mixing with hardner complete all as per manufacturer instruction as directed.(make: pidlite or Eqivalent) |
| 151 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 152 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 153 | S & F in repair PVC zebra pattern 100 % polyster roller venetian blinds with acrylic acid coating on both sides of the fabric to ensure the norman light penetration all as specified and directed. |
| 154 | Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender