Tender For Replacement Of Grill (Wire Net) On Static Water Tank Behind Choc, Upgradation Of Vip Rooms Of Trishul Officers Mess At Hq Wac Subroto Park
Tender Value
46 Lakhs
Estimated cost
Bid Submission
28 Jul 2026
5 days left
EMD
92000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Grill (Wire Net) On Static Water Tank Behind Choc, Upgradation Of Vip Rooms Of Trishul Officers Mess At Hq Wac Subroto Park
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Jul-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | S & F frame for hard drawn steel wire fabric square mesh of size of mesh (nominal pitch of wires 50 mm x 50mm and dia of wire each way 5 mm ,structure , roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe 410-W (Gde E- 250) quality A complete all as specified and as directed. |
| 2 | Demolition of concrete of any description and in any position not otherwise specifically provided for.complete all as specified and directed. |
| 3 | M & L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection complete all as specified and directed. |
| 4 | Taking down cement of cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 5 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed. |
| 6 | M&L for two coats synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed. |
| 7 | M & L for Preparing plastered or unplastered new surfaces of walls and applying two coats of weather proof emulsion paint of (white or tinted) over one coat of primer complete all as specified and directed. |
| 8 | Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and removal complete all as specified and directed. |
| 9 | M&L for PCC 1:2:4 type B-1(20mm graded aggregate), 25mm thick as in sub base to the tile flooring complete all as specified and directed. |
| 10 | M & L 15 mm thick screed bed or bedding layer of cement mortar (1:6), for laying of floor finishes complete all as specified and as directed. |
| 11 | M & L non-skid, ceramic coloured tiles 8mm thick, area of each tile exceeding 0.16 sqm but not exceeding 0.38 sqm, in floors, set and jointed in cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including screed bed 15mm thick average in cement mortar 1:6 complete all as specified and directed. |
| 12 | M&L for Virified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 13 | M&L for 200mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 14 | S&F satin finish and coloured ceramic tiles area of each tiles exceeding 0.06sqm but not exceeding 0.36 Sqm and as in floor set & jointed in neat cement slurry & pointed in coloured cement to match complete all as specified and as directed. |
| 15 | M&L for rendering 10 mm thick in cement mortar 1:4 on fair face of brick work or concrete for rough finish complete all as specified and directed. |
| 16 | M & L for joint free glazed coloured ceramic coloured tiles 7mm thick area of each tile not exceeding 1.00 sqm on vertical surface of walls set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles, over and including 10mm thick rendering in CM 1:4, all as specified and directed. |
| 17 | Taking down chowkhats with shutter without taking off shutters from the frames area n. exc. 1.50 sqm each & refixing the same in the same opening incl making good the disturbed surfaces complete all as specified and directed. |
| 18 | Taking up or down 15 mm dia steel tubing & connections including clearing for refixing or removal to store complete all as specified and directed. |
| 19 | Taking up or down 20 mm dia steel tubing & connections including clearing for refixing or removal to store complete all as specified and directed. |
| 20 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, Cleaning and removing all scale and dirt from RCC / PVC tank capacity of tanks exc. 500 ltrs and up to 1000 ltrs by emptying, drying, cleaning with chlorine/washing powder by scrubbing the dust with wire brush from tank by removing inlet and outlet pipe and refixing inlet and outlet pipe, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. |
| 21 | Dismantling un serviceable water tanks any description exc 500 but not exc 1000 Liters complete all as specified and as directed. |
| 22 | S&F 1000 litre capacity Rotational moulded polyethylene water storage tank, white colour, triple layers, conforming to IS, cylindrical vertical with closed top, hoisted and fixed in position complete all as specified and as directed. |
| 23 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 24 | Cutting chases, pining in making good to facings where required & pointing in cement mortar 1:3 to ends etc or edges of landings, steps cills,sunshades, shelves,lintels,etc and cutting chases for concealed water tubing and making good,cutting n.exc. 10cm girth in brick walls complete all as specified and directed. |
| 25 | S & F 15mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed. |
| 26 | S & F 20mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed. |
| 27 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore including necessary clumping complete all as specified and directed. |
| 28 | S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed. |
| 29 | S&F in repair Thin Rim Table top basin of size: 360mmx360mmx120 mm Jaquar code : SLS-WHT-6905 / AP Royal Bath Sense Code : TT-70-BGE / Somany in white colour with Click clack waste 32 mm size full thread with 130 mm height Colour Rose Gold Jaquar Code: ALD-BGP-727L130 / AP Royal Bath Sense Code : C230-BGE / Somany Code : 272150830011 modern design with Round shape, slim edges, with tap hole, anti bacterial glaze on ceramic, smooth glaze surface incl fixing on plateform with all required accessories/ fixtures complete in all respect complete all as specified and directed. |
| 30 | S&F in repair 15mm bore dia Exposed part kit of single lever basin mixer wall mounted consisting of operating lever, cartridge sleeve, nipple & spout, with colour Blush Gold PVD (Colour Rose Gold) Jaquar Code: KUP-BGP-35233NKPM / AP Royal Bath Sense Code : RGMYDV103U / Somany Code : 272111380111 with concealed body for single lever basin mixer wall mounted Jaquar code : ALD-CHR-233N / AP Royal Bath Sense Code : RGB2BD101 / Somany Code : 272110050101 incl all required accessories/ fixture to make operation complete in all respect complete all as specified and directed. |
| 31 | S&F in repair 32 mm bore dia Bottle Trap Size with 300 mm & 190 mm Long wall connection pipes & wall flange with colour : Blush Gold PVD (Colour Rose Gold) incl required concealed pipe upto trap with required accessories complete in all respect as specified and directed by Engr-in-Charge. Make : Jaquar Code: ALD-BGP-769L300X190 / AP Royal Bath Sense Code : REBT701 / Somany Code : 272150580021 |
| 32 | Supply and fixing in repair 6 mm thick looking mirror bevelled edge of selected quality glass of required shape and size with (Blush Gold PVD/ Black Matt Finish) as required 1st class hard wood desiner beading frame made around, mounted on 6 mm thick commercial ply or AC building board fitted to wooden plug with Gold finish brass screws complete all as specified and directed.Make of glass :- Atul /Modi Float/ Saint Goabain. |
| 33 | S&F in repair Towel rack 600 mm long with Lower Hangers, Stainless Steel Jaquar Code : AKP-BLM-35781PS / AP Royal Bath Sense Code : S2TW401 / Somany Code : 272151340261 of Colour : Black Matt complete in all respect complete all as specified and directed.. |
| 34 | S&F in repair Concealed Body for Joystick Diverter 40mm Cartridge with Button Assembly, (Button On Top) But without Exposed Parts complete all as specified and directed. (Code:ARC-CHR-87065C) |
| 35 | S&F in repair 15mm bore dia Blush Gold PVD (Colour Rose Gold) anglular stop cock with wall flange quarter turn full Antique including cover plate complete in all respect as specified and directed.. Make : Jaquar Code : KUP-BGP-35053PM / AP Royal Bath Sense Code : RGMYAC101 / Somany Code : 272211380151 |
| 36 | S&F in repair Wall Mixer Non-Telephonic Shower Arrangement with Connecting Legs & Wall Flanges Make : Jaquar Code:SOL-CHR-6219 complete all as specified and directed. |
| 37 | S&F in repair Overhead Shower 105mm Round Shape Single Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System.(CodeOHS-CHR-1709) complete all as specified and directed. |
| 38 | S&F compatible wall hung toilets cistern solution, wall hung with compatible Instaflush Pneumatic tank (SKU: 26351IN-P-NA)and Lynk Faceplate.(SKU: 75890IN-P-CP) Complete all as specified and directed. |
| 39 | S & F in repair Vitreous China wash down water closet pan (S-Trap) 1st quality (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including sheet cover complete all as specified and directed. Wall Mounted Toilet | True Rimless Ceramic Western Bathroom Commode with Advanced Germ Protection | Eco-Flush Technology Code:VGS-WHT-81953UF |
| 40 | S&F Towel Towel ring Square (Code : AKP-BGP-35721P) of Colour : Blush Gold PVD complete in all respect complete as specified and directed. Make : Jaquar Code : AKP-BGP-35721P or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 41 | S&F in repair Hand Shower (Health Faucet) Jaquar Code : ALD-BLM-565 / AP Royal Bath Sense Code : MBC232N / Somany Code : 272150680361 with 8 mm dia, 1 meter long easy Flex Tube & wall hook with Colour : Black Matt with check nut and washers complete all as specified and directed. |
| 42 | S&F in repair Toilet roll holder with stainless steel flap Jaquar AKP-BLM-35753PS / AP Royal Bath Sense Code : SQTP101 / Somany Code : 272151340241 with Black Matt paper holder complete in all respect complete as specified and directed. |
| 43 | S&F 12 mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes requiredcomplete all as specified and directed. |
| 44 | S&F factory made 18mm-19mm thick PVC foam board of density 600kg/cbm manufactured by an ISO-900-2008 certified company one side prelam and other side plain for kitchen cabinet shutter including machine pressed PVC edge banding in matching colour over all exposed edge Complete all as specified and directed. |
| 45 | S&F factory made 18mm-19mm thick plain PVC foam board of density 600kg/cum manufactured by an ISO-900-2008 certified company for Shelf / Partitions / Drawer Complete all as specified and directed. |
| 46 | M&L for Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and directed. |
| 47 | M&L for SS 304 Tile/Marble Insert Shower Channel Water Drainer for Bathroom with Anti-Foul Cockroach Trap (Center Hole, 30\\") complete all as specified and directed. |
| 48 | S&F Providing 25mm thick louvres and jallies precast cement concretein 1:2:4 type B0 (using 20mm graded stone aggregate) set in CM 1:4 (measured solid), including all mould- ings but excluding frame complete all as specified and directed. |
| 49 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 410-W (Gde E- 250 quality A) complete all as specified and directed. |
| 50 | M&L for Granite tiles 20mm thick grooved machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing types over & including screed bed 15mm thick rendered in CM 1:6 complete all as specified and directed. |
| 51 | Material & Labour for applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces Complete all as specified and directed. |
| 52 | M&L Providing and applying plaster of paris putty of 1-2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 53 | M&L Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work complete all as specified and directed. |
| 54 | Material and labour for complete removal of existing treatment old decorated surface of walls and applying two coat of oil bound distemper (white/ tinted) on walls complete all as specified and directed. |
| 55 | S&F Providing and fixing factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware[Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lorpayment purpose.) (A) Area not exceeding 2.00 sqm each incuding the following items Door Espag,Lever Door Handle,Standard Cylinder,Centre Striker, 3D Hinge Striker, Drainage, Glazing Bridge, Silicon Sealant Complete all as specified & directed |
| 56 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60(Suspension Grade), 2, 4, or 6 raised panel design calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. |
| 57 | Supply and fixing brass extruded handles of size 150 mm complete all as specified and directed. |
| 58 | S&F butt hinges heavy weight 100 mm long mild steel fixed with steel screw complete all as specified and directed. |
| 59 | S&F Brass barrel tower bolts 150mm with cast or sheet barrel and rolled or cast bolts with extruded sections and fixed Complete all as specified and directed. |
| 60 | S&F in repair brass four lever dead lock suitable for doors manufactured by Harrison Locks or Godrej as approved all as specified and directed . |
| 61 | S&F Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts 300 mm and fixed complete all as specified and directed. |
| 62 | Supply & fixing in repairs false ceiling with Semi perforated 12mm thick acoustical false ceiling, (fire retardant and sound absorbent) micro regular edged at all heights with mettalic false ceiling tiles of size 595x595 mm of approved texture, design and pattern minimum to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @ 120 grams per sqm including both sides) comprising of maint -T runners of size 15x32mm of length 300mm, cross -T of size 15x32 of length 600mm to form grid module of size 600x600mm , suspended from ceiling using galvanised mild steel items (galvanising @80 grams per sqmm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-Shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on perimeter wall /partition with the help of plastic rawl plugs at 450mm centre to canter and 40mm long dry wall screws. The work shall be carried out as per specification, drawing and as per direction of the Engr-in charge. Make- Diamond Ceiling/Brand Tm |
| 63 | Material and labour, Gunniting to existing RCC Chajja, facia, parapet, beams, landings and similar RCC members after removing all loose concrete & preparations of surface, application of derusting chemical such as Dr Fixit Rust Remover or equivalent, welding additional bars/welded steel wire fabric if found necessary, priming reinforcement bars with a coat of zinc primer of coating not less than 40 micron, provision of bonding agent with bonding material like Dr Fixit bonding agent and repair to external RCC structure with slurry light and steel/ply form work and shortcrete concrete of mixed 1:3:1 (one part of cement, three part of coarse sand and one part of 10mm and down aggregate) of minimum 50mm thick incl plastering 10 mm thick in CM mortar 1:3 all as specified in IS 9012-1978 (all priming and bonding epoxy based paint shall be of Dr Fixit epoxy zinc primer or equivalent) etc complete all as specified and directed, as below:- Note(s) : 1. The rates include for necessary formwork and scafolding etc. 2. Reinforcement and welded steel wire fabric will be measured and paid separately. |
| 64 | Demolition of cement Concrete of any description and in any position including any type of roof treatment , PCC padding, lime concrete etc, complete all as specified and directed. Note: All demolished material / debries will be disposed off out side the Airforce station Nal with out any extra cost to the contractor. He should arrange dumping site to dispose off material. |
| 65 | Roughening surface of old concrete floor by picking sweeping clean and washing down with water to remove dust etc and including brushing neat cement slurry with 3 Kg/Sqm in roofs, complete all as specified and directed. |
| 66 | M&L Cement concrete 1:3:6 type C1, (using 20 mm graded stone aggregate)mixed with water proofing compound pidi proof LW @ 200ml per 50Kg cement as per manufacturers instructions as in roof paddding, mass concrete finishing as required gradient cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 67 | M & L APP based polymeric membrane minium weight 3 Kg/Sqm and minium 3 mm thick, reinforced with polyster non wove fabric (wt. not less than 150 gms/Sqm ) laid by torch forced application over a coat of bitumen 85/25 grade applied hot @ 1.20 Kg/Sqm laid over and including a priming coat using bituminious primer @ 0.40litre/ sqm, complete all as specified and directed. |
| 68 | M&L for cutting grooves in brick wall for inserting APP membrane and other works size of grooves 75mm wide and 65mm deep and shapping horizontal face of grooves and making good with cement mortar 1:3 or PCC 1:2:4 complete all as specified and directed. |
| 69 | M&L Cement concrete 1:2:4 type B0,(using 12.5 mm graded stone aggregate) as in roof kerbs or mud stops, on junction of parapet, coping etc cement concrete surface finished even and smooth without using extra cement complete all as specified and directed. |
| 70 | Supply only Liquid water proofing compound ISI marked. |
| 71 | M&L for 100 mm thick PCC 1;4:8 type D2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 72 | M& L for Machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 60mm thickness, M-35 grade using grey cement & no pigment complete all as specified and directed. |
| 73 | M&L for sand cushioning 25 mm thick below paver block complete all as specified and directed. |
| 74 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding towall, fixed with self tapping screws as specified and directed. |
| 75 | Taking down old false ceilling any type and description & M&L for gypsum false ceilings with size 60cm x 60cmx9mm thick false ceiling tiles laminated on face and side with decorative PVC films and a metalize polyester film on back sides back in dew drop texture Ceiling tiles shall be fixed over and incl Powdered coated GI T- grid system of size 600X600 mm as per the manufactures instructions. Note Rates includes for taking down electrical fitting and refixing the same if required complete all as specified and directed. |
| 76 | S&F Stainless steel sink with draining board,made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets,connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 77 | Supply and fixing as in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC bend for required squat pattern etc, set with concrete and making good to floor, fixed as in repairs complete all as specified and directed. |
| 78 | Supply & fixing as in repair vitreous china wash hand basin, white flat back, size 300mm x 450mm including pillar tap 15mm dia chromium plated with capstan head with long screwed shanks and fly nuts, and brass chromium plated waste coupling 32mm dia complete all as specified and directed. |
| 79 | S&F as in repairs 100 mm dia mild steel chromium plated grating with or without waste pipe hole as per requirement complete all as specified and directed. |
| 80 | S&F in repair tubular towel Rail 20 mm dia D type 400mm length of brass chromium plated complete all as specified and directed. |
| 81 | S&F in repair soap dish vitreous China white, approximate size 160mmx 160mmx90mm , any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 82 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 83 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 84 | S & F in repairs vitreous china padastal pattern, \\"EWC\\" white with connection to trap, and to flushing pipe anti-syphonage pipe and including plastic water closet seat, closed pattern with flat bottom and cover and mild steel chromium plated & Health faucet 15mm dia pipe etc complete all as specified and directed. |
| 85 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 86 | M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft /loose soil complete all as specified and directed. |
| 87 | M&L for Cement concrete in foundations, filling and mass concrete type D2 1:4:8 (using40mm graded aggregate) complete all as specified and directed. |
| 88 | M&L for M-25 (using 20mm graded stone aggregate) design mix concrete for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 89 | M&L for M-25 (using 20mm graded stone aggregate) design mix concrete for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 90 | M&L for M-25 (using 20mm graded stone aggregate) design mix concrete for Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 91 | Form work to sides of concrete foundation, footing , base of columns, raft and raft beams, sides and so fits of foundation and plinth beams and similar work, flat complete all as specified and directed. |
| 92 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, flat complete all as specified and directed. |
| 93 | Formwork to square sides of pillars, posts, struts, piers, columns and stanchions; square, rectangular or polygoncomplete all as specified and directed. |
| 94 | M&L for Brickwork with subclass ‘B’ old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 95 | M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 96 | M&L for TMT steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 97 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 98 | Demolition of reinforced cement Concrete of any description and in any position (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 99 | Removing excavated material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 100 | M&L for Dholpur stone cladding gang saw cut 16-18 mm with machine cut edges, uniform colour of each stone size exceeding 0.5 sqm area fixed in cement mortar 1:4 with and including one number SS clamps (grade - 202) of flat-30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener,polishing, rubbing & including silicon treatment complete all as specified and directed. |
| 101 | M&L for Red sand stone jali gang saw cut 16-18 mm with machine cut edges, uniform colour of each stone size not exceeding 0.5 sqm area fixed in cement mortar 1:4 with made to shape in each slab, using red stone patti at top and bottom of stone and Stone pillar for supporting of stone patti & Stone jali & including polishhing & rubbing complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 28, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysJul 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysJul 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender