Tender For Repairs To Chajja/Parapets, Plain Cement Concrete Flooring, Tiles Flooring And Connected/Approach, Bldg Inside Drdl, Asl Labs Under Age B/R-I, Kanchanbagh, Hyderabad.
Tender Value
48.50 Lakhs
Estimated cost
Bid Submission
22 Jul 2026
16 days left
EMD
97000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Chajja/Parapets, Plain Cement Concrete Flooring, Tiles Flooring And Connected/Approach, Bldg Inside Drdl, Asl Labs Under Age B/R-I, Kanchanbagh, Hyderabad.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding /backing coat and removing rubbish off the premises, complete all as directed. |
| 2 | Demolition of cement concrete of any description not otherwise specifically provided for as in floor/foundation etc., complete all as directed. |
| 3 | Demolition of Brickwork or stone/boulder masonry, built in Cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles |
| 4 | Cleaning of Roof gutter including water outgoing holes at any hight of bldg,work shop and hangers and removing the materials leaves, vegitation mud or oter waste materials to distance n exc 50m, complete all as specified and directed by Engineer-in-Charge. |
| 5 | Cleaning of drains by excavating of the filled earth. Vegetation and all forged material average width 45 cm & depth 50cm and removing the excavated material to a distance exc. 50m and not exc. 250m complete all as specified and as directed |
| 6 | M&L for repairing the edge/corner of chajja/roof projection and similar work by removing of plastered width/girth exceeding 15cm & n.exc 30cm and making good with 15cm rendering in cment mortar 1:3 to match with including chicken wiremesh netting on exisiting surfaces including necessary form work complete all as specified.(Note L- Height of building upto G+2) |
| 7 | M&L brick work with sub class 'B' bricks (with old size bricks) straight or curved on plan exc 6.00m mean radious, built in CM (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L brick work with sub class 'B' bricks straight or curved on plan to any radious in half brick thick built in CM 1:6. |
| 9 | M&L PCC 1:4:8 type D2 using 40mm graded stone agg as in flooring, foundation and mass filling, complete all as specified and directed by Engineer-in-Charge. |
| 10 | M&L PCC 1:2:4 type B-0 (using 12.5 mm grade stone agg)concrete 25 mm thick as floor even and fair to receive top layer complete all as specified and directed |
| 11 | M&L PCC (1:2:4) type B-1 using 20mm graded stone aggregate, 100mm thick finished even & smooth w/out using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 12 | M&L Non skid coloured ceramic tiles 7 mm thick area of each tiles exc 0.06 sqm but n.exc 0.11 sqm as in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match to complete all as specified and as directed. |
| 13 | M&L Non skid coloured ceramic tiles 7 mm thick area of each tiles exc 0.11 sqm but n.exc 0.18 sqm as in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to matchto complete all as specified and as directed. |
| 14 | M & L for vitrified ceramic tiles light shade 09-10mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm over & including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge |
| 15 | M & L for vitrified ceramic tiles dark shade 09-10mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm over & including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge |
| 16 | M & L for coloured glazed ceramic tiles of size 350x250x7mm /450 x 300 x 7 mm thick on vertical surfaces such as skirting/dado, jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles, complete all as specified and as directed. |
| 17 | Rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces to back of tiles |
| 18 | Screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes |
| 19 | M & L for 18 to 20 mm thick granite (of any type) machine cut in floor/platform/tread, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match shade of granite stone including griding and polishing types over screedbed complete all as specified and as directed. |
| 20 | M & L for 18 to 20 mm thick granite (of any type) machine cut in skirting/dado/riser, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match shade of granite stone including griding and polishing types over screedbed complete all as specified and as directed. |
| 21 | M & L Rounding to edges of granite stone slabs one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed |
| 22 | M&L for 100 mm thick Cement Concrete (1:3:6) Type C2 (40mm Graded Stone Aggregate) as in Plinth protection , etc., finishing the cement concrete surface even and smooth without using extra cement, including Use and Waste of necessary Form Work, complete all as specified and directed by Engineer-in-Charge. |
| 23 | M&L for 30mm thick Paving tiles using white cement and pigments of size 380mm x 380mm with wear resistant coating of approved design laid with cement slurry @ 3Kg/ Sqm over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 24 | Taking down Cement Plaster, any description on Brick Walls or on Concrete Surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s),complete all as specified and directed by Engineer-in-Charge. |
| 25 | M&L 15 mm thick rendering in cm 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 26 | M&L Rendering 15mm thick in CM 1:6 on brick or concrete surfaces finished even and smooth without using extra cement. |
| 27 | Supply and fix 16 mm dia CPVC pipes 11 SDR & plain CPVC 11 SDR fittings, fixed on wall concealed or exposed /ceiling or laying in floors including taking up or down steel tubing all as specified and as directed by Engineer-in-Charge. Make : Astral/Finolex/Prince etc |
| 28 | Supply and fix 20 mm dia SDR 11 CPVC pipes & plain CPVC SDR 11 fittings, fixed on wall concealed or exposed /ceiling or laying in floors including taking up or down steel tubing all as specified and as directed by Engineer-in-Charge. Make : Astral/Finolex/Prince etc |
| 29 | S&F in repairs 40mm dia GI medium grade pipe as in spouts 45cm long including making in holes in RCC and making good in cement mortar 1:1/PCC 1:2:4 complete all as directed by Engr-in-charge. |
| 30 | S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) tripple layered 500 ltr capacity ISI mark, hoisted and fixed in position all as specified in SSR Part I including taking down old unserviceable water tank complete all as specified and as directed by Engineer-in-Charge. |
| 31 | S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) tripple layered 1000 ltr capacity ISI mark, hoisted and fixed in position all as specified in SSR Part I including taking down old unserviceable water tank complete all as specified and as directed by Engineer-in-Charge. |
| 32 | S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) tripple layered 2000 ltr capacity ISI mark,, hoisted and fixed in position all as specified in SSR Part I including taking down old unserviceable water tank complete all as specified and as directed by Engineer-in-Charge. |
| 33 | S & F in repair ball valves, PTMT epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed of 20 mm bore complete all as directed by Engineer-in-Charge. |
| 34 | S & F in repair ball valves, PTMT epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed of 25 mm bore complete all as directed by Engineer-in-Charge. |
| 35 | S & F in repairs PVC (SWR) pipes 160mm bore, single socketed in any length with rubber ring joints fixed to wall or laid in floors complete all as directed by Engineer -in-Charge. |
| 36 | S & F in repairs PVC (SWR) bends (any radius) suitable for 160 mm bore pipe complete all as directed by Engineer -in-Charge. |
| 37 | S & F Machine pressed precast concrete interlocking paver block any shape and size with gray cement and pigment (approved by GE) confirming to IS 15658-2006 of 60 mm thickness, M-35 grade including laid over , 40mm sand cushion bed and preparing the surface to uniform level to receive tiles and the corners shall be finished with 1:2:4 PCC (using 20 mm graded stone aggregate) finished the surface even and smooth including taking down old unserviceable tiles and depositing debries in low laying areas upto a lead of 500 mtrs complete all as specified and as directed by Engr-in-Charge. |
| 38 | M&L for preparation of old distempered surfaces of walls by washing, rubbing down and stopping and applying one coat of oil emulsion distemper complete all as directed. |
| 39 | M&L for preparation of old surfaces of walls by washing, rubbing down and stopping and applying one coat of weather proof antifungal exterior paint complete all as directed. |
| 40 | M & L for Preparation of new plastered surfaces and applying two coats of weather proof antifungal Acrylic Exterior emulsion paint of Apex Ultima and shade over a coat of approved primer as recommended by the manufacturer over a coat of putty to make surfaces smooth all as required and as directed. |
| 41 | M&L for Preparing newly plastered surfaces and applying two coats of distemper oil emulsion including priming plastered and other surfaces with alkali resistant priming paint on surfaces of walls over a coat of wall putty to make surfaces smooth. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender