Tender For Periodical Services And Certain Misc Works At A & B Wing Of Dad Res Complex Under Age B/R-I Of Ge (S) Pune.
Tender Value
49.50 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
10 days left
EMD
99000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services And Certain Misc Works At A & B Wing Of Dad Res Complex Under Age B/R-I Of Ge (S) Pune.
BOQ
| Sl. No. | Item Description |
| 1 | M & L for preparation of old painted decorative surfaces of wall including scrapping and brooming and clean wherever necessary required and applying one coat of oil bound distemper ( White or tinted ) on walls complete all as specified and directed. |
| 2 | M&L for preparation of old painted surfaces of ceiling by brooming down, dusted, scrapping wherever necessary required and applying two coat of white washing on ceiling surfaces,etc. complete all as specified and directed |
| 3 | M& L for prepartation of old decorative surfaces of ceiling incl cornices of any description, sand papered, dusted and applying one coat of Oil bound distemper on Ceiling surfaces complete all as specified. |
| 4 | Complete removal of existing treatment, washing, scrubbing down, scrapping by sand papered to surfaces wherever necessary required preparing for and including providing two coats of oil bound distemper over a coat of 2 mm thick wall care putty,etc.complete on walls ,all as specified and directed. |
| 5 | M&L for preparation of old painted surfaces of wall and ceiling by washing rubbing down and stopping of one coat of weather proof APEX ULTIMA paint (white/tinted) of alkali & fungal resistance,dirt resistance exterior paint of required shade with silicon [email protected] ltrs/10 Sqm,etc.complete all as specified and directed. |
| 6 | M&L for preparation of old painted surfaces and applying one coats of cement base paint white or tinted, on walls, all as specified and directed. |
| 7 | M & L for one coat of synthetic enamel paint on wooden surfaces of any description not otherwise discribed over 10 cm width of girth including preparation of old painted surfaces complete all as specified. |
| 8 | M & L for one coat of synthetic enamel paint on steel surfaces of any description not otherwise discribed over 10 cm width of girth including preparation of old painted surfaces complete all as specified. |
| 9 | Rounding edges of stone slab ,one edge,such as in step treads,cooking plateform and other bsimilar situation,etc.complete all as specified and directed |
| 10 | M & L for Rendering 10mm thick in cement mortar 1:6 on brick/concrete surfaces finished even & smooth with a thin layer of sagol finish,incl taking down cement plaster on wall surfaces and removal of debries out side MD land,etc.complete all as specified and directed . |
| 11 | M/Lfor 10 mm thick rendering in cement mortar (1:3) on ceiling surfaces and finished even and smooth without using extra cement ,including taking down old cement plaster on ceiling and removal of debries out side MD land, etc.complete all as specified and directed. |
| 12 | M & L for Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 13 | M & L for preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of primer on ceiling complete all as directed by Engineer-in-Charge. |
| 14 | M&L for prepolished machine cut 20-25 mm thick kota stone slab as in staircase step, tread, landing,flooring,etc. over 15 mm th,in CM 1:4, screed bed laid and jointed and pointed in neat cement slurry mixed with pigment to match the shade of slab incl mirror polishing and rubbing,etc.and demolition/dismantling of stone slab and removal of debries out side MD land,etc,complete all as specified and directed. |
| 15 | M&L for coloured glazed ceramic tiles 600x300x7 to 8mm thick in vertical surfaces such as skirting dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry surfaces incl demolition /dismantling of old tiles and removal of debries out side MD land etc.complete all as specified and directed. |
| 16 | M&L Non skid ceramic colored tiles 7 to 8mm thick, (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc.set and jointed in neat cement slurry & pointed in white or coloured cement to match.including 15mm thick screed bed or bedding layer as in CM 1:6 incl demolition /dismantling of old tiles and removal of debries out side M D lands all as specified |
| 17 | M & L ( light shade) Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6,incl demolition/dismantling of old tiles and removal of debries out side MD land,etc.complete all as specified and directed. |
| 18 | M & L ( light shade) Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in skirting , set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick backing coat in CM 1:4 all as specified and as directed by Engr-in-Charge. |
| 19 | Demolition of stone slabs and tiles of any description of thickness in floors, aprons etc laid bedded and pointed in any mortar and including removal of debries out side MD land Complete all as specified and directed. |
| 20 | M & L granite 18 to 20 mm thick ( of any type ) work ( table rubbed and polished ) in steps, jambs, pillars, window cill , cooking platform and flooring in CM 1:4 including pointing in white cement or colour matching with 1:2 using marble dust with admixture of pigment to match with shade of granite with and including screed bed or bedding layer 15 mm thick, in CM 1:6 on stone masonry surfaces. |
| 21 | M&L Machine cut cudappah stone slab 20mm to 25mm thick, over cement screed base laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing,etc. complete all as specified and directed. |
| 22 | S & F 15 mm GI tubing medium grade with all fittings & fixed complete to walls / ceiling or laid in floors, etc. incl taking up or down old GI tubing and removal to store, etc. complete all as specified & as directed. |
| 23 | Cutting and chasings, pinning in, making good to facing where required and pointing in CM 1:3 for concealed GI tubing, etc.complete all as specified and directed |
| 24 | S&F in repairs of Fanlight pivot with plate catch spring of size 20mmx 50 mm and suitable for shutter cast brass of 25 mm thickness, etc.complete all as specified and directed |
| 25 | S & F 20 mm GI tubing medium grade with all fittings & fixed complete to walls / ceiling or laid in floors,incl taking down or up old GI tubing and removal to store,etc.complete all as specified & as directed. |
| 26 | S&F in repairs of PVC 32 mm bore flexible pipe,75/90 cm long,for WHB/Kitchen sink waste water discharge pipe,etc.complete all as specified and directed.. |
| 27 | S & F in repairs vitreous china squatting Pan \\" Orissa \\" pattern of size 580 mm X 440 mm white with integral foot rests ( excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete all as specified and directed. |
| 28 | S & F in repairs vitreous china wash down water closet pan ( pedesal pattern ), white including connection to drain ( or outgoing pipe ) and to flushing pipe with and including S & F plastic water closet seat white closed pattern with flat bottom, cover and mild steel hinging device complete all as specified and directed. |
| 29 | S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and CP coupling wastes and 32 mm bore pvc waste pipe; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm |
| 30 | S & F in repairs wash hand basins, vitreous china of size 550mm X 400mm ( flat back or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of supply and fixing CP coupling waste,32 mm bore PVC pipe,etc. complete all as specified and directed. |
| 31 | S&F cast brass fan light pivot with plate size 25x65 mm catch spring and suitable for shutter of 30 mm thickand fixed, etc.complete all as specified and directed. |
| 32 | S & F in repairs of 15 mm bore pillar taps,fancy type cast copper alloy with capstan heads, chromium plated , screwed down high pressure with or without lattered \\" HOT\\" or \\" COLD\\" with long screwed shanks and fly nuts, complete all as specified and directed. |
| 33 | S & F in repairs 15 mm bore bib taps,fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 34 | S & F in repairs 15 mm chromium plated 2 way bib cock with wall flange confirming to CAT No. F2002161 of \\" Cera\\" or of equivalent make specified here in after. |
| 35 | S & F in repairs of 32 mm bore waste coupling fittings chromium plated with long screwed shanks and fly nuts,screwed for iron pipe for kitchen sink,etc.complete all as specified and directed. . |
| 36 | S & F in repairs 15 mm bore, 600 mm long PVC connections with PTMT nuts complete fixed to iron pipe at both ends complete all as specified and directed. |
| 37 | S & F in repairs 15 mm stop valves, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed. |
| 38 | Ditto all as per item no 38 above but consealed long shank |
| 39 | S & F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, including flush pipe 32 mm dia.complete all as specified and directed. |
| 40 | S & F gratings 100 mm dia of PTMT ( minimum wt 25 gms) complete all as specified and directed. |
| 41 | S & F 125 mm dia swivel type brass chromium plated shower rose of approved quality in repairs complete all as specified and directed. |
| 42 | S & F in repairs for health faucet including flexible cod of minimum 1 mtr complete all as specified and directed. |
| 43 | S&F 125x60 mm size pressed steel door frames for doors with one or more rebates including necessary fixing luges,hinges,lock strike plate,etc.complete all as specified and directed. |
| 44 | S&F 105x60 mm size pressed steel door frames for doors with one or more rebates including necessary fixing luges,hinges,lock strike plate,etc.complete all as specified and directed. |
| 45 | S&F in repairs rotational moulded polythylene water storage tanks of double layers ISI Marked (cylindrical vertical with colsed top) hoisted and fixed in postion all as spd and directed of 500 ltrs capacity incl dismantling of old water tank and removing to stores,etc.complete all as specified and directed. |
| 46 | S&F rotational moulded polythylene water storage tanks of double layers ISI Marked (cylindrical vertical with colsed top) hoisted and fixed in postion all as spd and directed of 1000 ltrs capacity complete all as specified and directed. |
| 47 | S & F 600mm X 450mm X 5.5mm thick bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers with aluminium beading all around fixed in repairs complete all as specified and directed. |
| 48 | S&F PVC box type cabinet of approx size 35 x 40 x 12 cm with 3mm thick mirror mounted on shutter, with PVC shelves 2mm thick and outer frame having 4mm thickness fixed in existing opening with wooden plugd including taking down existing all as specified and directed. |
| 49 | S & F in repairs of Transparent Glass 7.5 x 7.5 inch corner bathroom shelves with bracket (set of 2) complete all as specified and directed. |
| 50 | S&F in repairs of stainless steel plate rack made of 1.00 mm thick sheet grade SS- 304 of standard size 30\\"x32\\"x8\\"/10\\" and of ISI mark approved quality of finish complete all as specified and directed. |
| 51 | S & F in repairs brass chromium plated Tubular towel rail 20mm dia \\"D\\" type 60cm long complete all as specified and directed. |
| 52 | Taking down wooden door shutter and refixing in including resecuring or easing and refixing in the same opening.nexc 1.00 sqm each complete all as specified and directed. |
| 53 | Taking down wooden door shutter and refixing in including resecuring or easing and adjusting in the same opening.exc 1.00 but nexc 2.00 sqm each complete all as specified and directed. |
| 54 | S&F in repairs Stainless Steel fancy type curtain rod 25mm bore with fixing with brackets and both end stops rollers etc complete complete all as specified and directed. |
| 55 | S & F Stainless Steel CP, brackets suitable for 25mm bore curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc and match with complete all as specified and directed by Engineer-in-Charge. |
| 56 | Providing one plumber (Possessing with all T&P) to attend day to day complain related to plumbering works, sanitary fitting such as repair to water pipe line, flushing cistern, WC, concealed stop cock, shower, hot & cold mixer, health faucet, PVC water tank clean and repairs float valve, gate valve, floor trap, PVC pipe and etc all working day i.e. from 9 AM to 5 PM (8 Hrs working) complete all as directed by Engr-in-Charge. Note:- 1. Plumber shall be presented in AGE office from 9 AM to 5 PM (8 hrs working) to note & got rectified the complaints. 2. Day to day complaint register shall be maintained by the contractor by showing area & building / Quarter No. in which the complaint attend & got rectified. User’s signature shall also be obtained on complaint register in support of proof of rectification of complaint. 3. Bath / Sanitary fittings (If any) required at site shall be provided by Engr-in-charge free for fixing only. |
| 57 | Providing one carpenter (Possessing with all T&P) to attend day to day complain related to joinery works such as repair to doors, windows, glass, wire mesh and hydraulic door closer, door stopper, sliding bolt, hinges, handles, tower bolt, wooden paneling, cupboard shutters and curtain rod and brackets etc and similar others works all working day i.e. from 9 AM to 5 PM (8 Hrs working) complete all as directed by Engr-in-Charge. Note:- 1. Carpenter shall be presented in AGE office from 9 AM to 5 PM (8 hrs working) to note & got rectified the complaints. 2. Day to day complaint register shall be maintained by the contractor by showing area & building / Quarter No. in which the complaint attend & got rectified. User’s signature shall also be obtained on complaint register in support of proof of rectification of complaint.3. Builders hardware such as handle, door closer, tower bolt or hinges etc. (If any) required at site shall be provided by Engr-in-charge free for fixing only. |
| 58 | Taking down angle iron/ wooden chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5 sq. m but n. exc.4sq m each and removed to store complete all as specified and directed. |
| 59 | S&F 30 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels,commercial type on both sidesipping/frame to match, supplied and fitted to chowkats complete all as specified and directed. |
| 60 | S & F 30 mm thick Il nd class hard wood glazed and skeleton shutters, devided into squres with plain, chamfered or rounded mitered and rebated sash bars any numbers, open rebated prepared to receive guaze, edges of framing plain, chamfered or rounded , fitted with cut and mitered beads for securing glass etc size of members of shutters in SSR Part- I, Section 8, Clause 8.24 (a) |
| 61 | M & L preparation of new or priviously untreated surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer to newly wood surfaces complete all as specified and directed. |
| 62 | S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm & fixed with stainless steel wire stapples complete all as specified and directed. |
| 63 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with M.S square tube, supplying & fixing in opening as per specifications, drawings complete all as specified and directed. |
| 64 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting, of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat molded plain co lour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck inside with solvent cement for steel & plain co lour PVC sheets for top rail, lock rail& bottom rail on either side & or gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet banding, and joints to gather with solvent cement, supplying & fixing in the frame at site as per specification & drawing. |
| 65 | Taking down door shutter of any description exc. 1 sq.m and n.exc. 2 sq.m each and removing to stores complete all as specified and directed. |
| 66 | S & F 100 mm long butt hinges medium weight , cold rolled Mild steel for door shutters complete all as specified and directed. |
| 67 | S&F 150 mm aluminium anodized barrel tower bolts of extruded section for door shutters complete all as specified and directed. |
| 68 | S & F 300 mm long aluminium alloy , anodised sliding door bolt with hasp , staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy and fixed complete all as specified and directed. |
| 69 | S & F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 70 | S & F sheet glass 4 mm thick plain or tinted, fixed to aluminium frame in partition/ three track sliding window of area exc.0.50 sqm,etc. incl removal and refixing in same opening and make easing for the smooth functioning,etc.complete all as specified and directed. Note:-replacement of damaged handle lock, Bearing / rubber packing is included in the rates for aluminium sections above. |
| 71 | S & F in repairs of 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations , fixed with screws to timber/ aluminium frame work complete all as specified and directed. |
| 72 | Taking down angle iron/ wooden chowkats or frames with shutters (without taking off shutters from the frame) not exc. 1.5 sq. m and removed to store complete all as specified and directed. |
| 73 | Taking down shutters of any description exc 1 sqm but n.exc. 2 Sqm each & removed to store complete all as specified and directed. |
| 74 | S&F continuous(piano) hings,mild steel,bright finish or electrogalvanised 30 mm flap width,etc.complete all as specified and directed |
| 75 | S&F 125 mm long size brass handles,cast type,polished bright,fixed with screws,etc.complete all as specified and directed. |
| 76 | S & F hasp and stapple aluminium anodised safety type with MS hinges pin including bolt to hinge plate and fixed with screw 100 mm size,fixed as in repairs complete all as specified and directed. |
| 77 | S&F in repairs CP brass mixer for mixing hot &cold water screwed down for iron pipe,etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 78 | S&F in repairs CP brass mixer for mixing hot &cold water screwed down for iron pipe,etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender