Tender For Provn Of Certain Sanctioned Work At Old Air Field Under Ge 970 Ews
Tender Value
45.30 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
7 days left
EMD
91000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Budgam → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Certain Sanctioned Work At Old Air Field Under Ge 970 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n.exc 1.50m wide and n.exc 1.50m in depth and getting out in soft/loose soil complete all as specified. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed. |
| 3 | Removing excavated material/soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed |
| 4 | M & L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation, .complete all as specified and directed. |
| 5 | M & L RCC M25 (Design Mix) as in foundations, including rafts, footings, foundation beam, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 6 | M & L for RCC M 25 (Design mix) as in Columns, pillers, peir, posts, and struts complete all as specified and directed. |
| 7 | M & L for RCC M 25 (Design Mix) Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed |
| 8 | M & L for RCC M 25 (Design Mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies and in shelves and the like complete all as specified and directed |
| 9 | Use and waste form work to sides of concrete foundation, footing, bases of columns, plinth beam, side and soffits of plinth beam and similar works in vertical surfaces complete all as specified and directed. |
| 10 | Use and waste form work rough finished surface of concrete as in Square, rectangular or polygonal to sides of columns, pillars etc complete all as specified. |
| 11 | Use and waste form work to sides and soffits of floor or roof beams, lintel beam , cantilevers, shelves etc complete all as specified. |
| 12 | Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specifed . |
| 13 | S & F TMT bars 10 mm dia and over, cut to length, bent to shape as required incl cracking bending hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed |
| 14 | Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders etc. |
| 15 | M&L brick work with sub class 'B' modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 complete. |
| 16 | M & L Plastering 15 mm thick in in Cement Mortar 1:4 on Fair Faces of Brick Wall, Cement block wall or on Concrete Surfaces, Surface Finished Even and Smooth without using Extra Cement complete all as specified and as directed. |
| 17 | M&L for 12 mm thick rendering on brick work or concrete surfaces of internal wall in cement mortar 1:6 Surface Finished Even and Smooth without using Extra Cement complete all as specified and as directed. |
| 18 | M & L Preparation of newly plastered surface and applying two coat of cement base paint over coat of wall primer complete all as specified and directed. |
| 19 | M & L preparation on newly plastered surface apply two coat oilbound distemper over coat of wall primer complete all as specified and directed. |
| 20 | M&L for moorum / Red Bajari filling in floor or pavings, laid in layers n. exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed. |
| 21 | M & L 100 mm thick PCC 1:4:8 Type D 2 ( 40 mm graded aggregate ) as in Floor sub base complete all as specified and directed. |
| 22 | M & L 25 mm thick PCC Type B0 1:2:4 (12.5 mm graded aggregate) as in floor finish to receive top finish of floor complete all as specified and directed. |
| 23 | M&L vitrified ceramic tiles light shade pattern as required 10mm thick (Square/rectangular) polished, area of each exc 0.18 Sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matches with and including 15mm thick screed bed in CM 1:6 compete all as specified and directed by Engr-in-Charge |
| 24 | -ditto- all as per item No.23 above but on skirting over with and including 10mm thick backing coat in CM 1:4 complete all as specified and directed by Engr-in-Charge. |
| 25 | M&L Granite (of any type) tiles, 18-20 mm thick machine cut laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone as in slab , window sills sides fo slab etc including cutting and polishing with and including 20mm thick screed bed or bedding in cement mortar 1:4 and all as specified and directed by Engr-in-Charge. |
| 26 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engr-in-Charge. |
| 27 | M&L for Surface excavation n. exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soft and loose soil complete all as specified and directed |
| 28 | M&L for PCC (1:2:4) type B2 using 40mm graded crushed agg 150mm thick over rammed earth as in top layer of hard standing complete all as specified and directed. |
| 29 | M&L 75 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection/foot path etc. |
| 30 | M&L Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade A complete all as specified and directed. |
| 31 | M & L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, including welding gusset plate, welding at factory or at site fixing over roof beams as per direction of Engr-in-Charge , complete all as spcified and direction. ( Fe-290 Gde E-165) |
| 32 | S & F Rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, vertical post for verandha , fixed with angle cleats or other connecting plates etc confirming to Fe 410-W-(Gde-E-250)quality-A complete all as specified and directed. Note :- Fabrication of roof truss, purlins post , rafter etc cutting , welding, bending , or any other nature of work shall be at site or shop including in above rate. |
| 33 | S & F Plates (plain or chequered) channels , square or beams cut or notched (ordinary and counter sunk) forming holes, without any attachments or with rivetted, bolted ot welded attachments, etc confirming to Fe 410-W(Gde-E-250)quality-A complete all as specified and directed. Note - cutting to require size and welding or boulting to Beam , post, rafter shall be at site, rate included in this item. |
| 34 | S & F Pre-painted galvalum aluminium zinc coating GI based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength as in roof covering/clading to wall , it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering all as directed at site all as specified and dircted. |
| 35 | S & F Pre-painted galvalum aluminium zinc coating GI based plain steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws all as specified and directed. |
| 36 | S & F Mild steel bolts of exc 20 and not exc 25 mm dia , purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 30 cm long complete all as specified and directed. |
| 37 | M & L for preparation of new steel surfaces of any description over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer completed all as specified and directed. |
| 38 | S&F 12mm thick Gypsum board for ceiling fixed with GI Powder coated snap grid 605 x 605mm frame work as in false ceiling including hangers 4mm dia GI wire (upto 1200mm centre to centre upto length as required at site) and adjusting level fixed to roof wooden member by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners complete all as specified and directed by Engr-in-Charge. |
| 39 | S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars , dovetailed or welded complete all as specified. |
| 40 | S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars , dovetailed or welded complete all as specified. |
| 41 | M&L mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified. |
| 42 | S & F Galvanised steel wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified. |
| 43 | S & F 4 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane complete . Note :- Fixing only rate is included in window/door shutter items considered therein |
| 44 | M&L 2nd Class Hard wood ( Sal) Plain , solid , straight chowkhats and frames , wrought , framed rebated on the solid , rounded or chamfered , put together with glue, pinned at joints, supplied and fixed complete all as specified. |
| 45 | M&L Preaparation surfaces of wood and wood based materials and treated with tar to backs of chowkhats etc. area tarred exc 0.10 sqm but not exceeding 0.50 sqm each complete all as specified. |
| 46 | M&L preparing surfaces of wood and wood based materials , steel and iron work , new or old , of any description and girth, not otherwise described , and treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkhats, etc.'area tarred n exc 0.1 sq.m each with tar or coal tar black paint all as specified. |
| 47 | S & F 35mm thick 2nd class hard wood Plain framed panelled shutter(any number of panels) with panels ot timber flat on both sides (feather edged), or of veenerd pparticle board medium density, wood particle board with commercial face veneers, fixed to chowkats complete all as specified and directed. |
| 48 | M&L 35 mm thick, 2nd class Hard wood ( sal) Glazed and skeleton door shutters , open rebated and prepared to receive glass, gauze, etc. ( without sash bars), edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass/gauaze complete all as specified. |
| 49 | M & L for preparing new wood or wooden based surfaces of any description, not otherwise described over 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete. |
| 50 | S & F 100mm size butt hinges, medium weight, cold rolled mild steel complete. |
| 51 | S & F aluminium 200 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete. |
| 52 | S & F 150mm size aluminium handles cast type, anodised ISI marked complete |
| 53 | S & 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete. |
| 54 | M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM(1:4) complete all as specified and directed |
| 55 | M&L for rendering 10mm thick in CM 1:6 on brick work or concrete surfaces, finished the surface even and smooth without using extra cement , complete all as specified and directed. |
| 56 | S&F factory made Box type mild steel windows side hung glazed shutters with chowkhats with glazing bars to receive glass and other side of the window wire mesh shutters to receive wire mesh or wire guage dovetailed or welded and steel peg stay including 4mm thick plain glass, 1.18mm thick wire mesh, guard bars and filled with PCC 1:2:4 12.5 mm aggregate with and including necessary welding, reveting, tower bolt, handle, hold fast & hinges as per Drg No CESZ/TD-1018/2011 sheet No 1/3 complete all as specified and directed. |
| 57 | S&F 35mm factory made shutters plain framed, panelled shutter with lock rail and panel of 9 mm BWP commercial ply or 12 mm to 15mm veneered particle board with commercial veneering on both faces including all fittings and fixtures . The size of rail and stile as per IS-1003 (Part - I) kiln seasoned and chemically pressure treated complete all as specified and directed . |
| 58 | M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in flooring complete all as specified and directed. |
| 59 | M&L Forming 12mm thick expansion joints fillled with pre-formed bituminous filler for 250 mm thick slab and top 30mm primed and sealed with sealing compound, Grade 'A' complete all as specified and directed. |
| 60 | M&L Finishig surface of concrete roads, pavements, by brooming complete all as specified and directed. |
| 61 | M&L for preperation of new plastered surface of wall and applying two coat of white wash, complete all as speified and directed. |
| 62 | M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over priming plaster with alkali-resistant priming paint etc all as specified |
| 63 | M & L PCC 1:2:4 type B0 12 .5 mm graded aggregate cement concrete as filling to pressed steel frames complete all as specified and directed. |
| 64 | Material & labour Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary s&f lugs, Butt hinges, lock strike plate, etc complete, size of frame 105x60mm incl bottom of each chowkat to be welded with 2 nos 25x25x3mm thick flat iron projecting 10 cm on either side complete all as specified and directed. |
| 65 | M&L hard core of guage exc 63mm broken stone or boulders, deposited spread and levelled in layers n exc 15cm thick, watered, rolled and rammed to a true surface complete all as specified and diredted. |
| 66 | M&L Providing, cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregrate in roof kerbs or mud stops, rounded or chamfered on edges, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like includingweathering, slightly rounded or chamfered angles andthroating, as directed |
| 67 | M & L 60 mm thick interlocking tile of M-30 mix laid over dry sand cushioning, with grey cement and pigment conforming to IS-1658-2006, , filling of joints with sand & compaction after filling of joints and edges shall be secured with PCC 1:2:4 type B-0 complete all as specified and as directed. (Note : Supplying and spreading for sand cushioning shall be measured and paid separately) . |
| 68 | M & L Precast cement concrete block Type B1 1:2:4 (20 mm graded aggregate) masonry with solid blocks exc 10 cm in width and setting in mortar 1:6 complete all as directed and specified. |
| 69 | Dismantling floor hearth or wall tiling including cement mortar bedding(but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 70 | M&L non skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including laid over 15mm thick screed bed in CM (1:6) compete all as specified and directed by Engr-in-Charge |
| 71 | ditto all as per item no 70 above but on skirting over with and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed by Engr-in-charge. |
| 72 | Material and labour for point wiring with two single core 1.5 aqmm cable (nominal area) stranded copper conductor ,PVC insulated unsheathed cable ,1100 V grade in and including concealed PVC conduit of size not less than 20mm dia with modular metal flush box of suitable size modular metal flush box for mounting fittings/junction boxes and wiring to be terminated in modular metal flush box including all accessories and using single core 1.5 Sqmm unsheathed cable as in earth wire(green colour) connected to common earth dolly complete all as per specfied and directed for following:- |
| 73 | (a) One light/Fan point controlled by one switch. |
| 74 | All as per item above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size. |
| 75 | S&F for modular switch 6 Amps/module single pole one way 230 V, 50 Hz, AC , with outer strip complete all as specified and directed by Engr In charge. Make: Havells / Legrand/ Indo Asian |
| 76 | M&L Fan regulator, 120W - 2 module complete all as specified and directed. |
| 77 | S&F of ceiling rose surface backlite 65x50mm 3 terminals complete. |
| 78 | M&L in replacement Modular switch, 16 Amps 1Way, 1 module with modular plate light marking 230V AC complete all as specified and directed by Engineer in charge. |
| 79 | M&L in replacement Modular socket outlet 2/3 pin 6/16 Amp universal socket 2 module complete all as specified and directed by Engineer in charge. |
| 80 | Supply and fixing Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp, 240 Volts complete all as specified and directed. |
| 81 | Supply and install hi wall split units indoor/ outdoor complete with cordless remote control unit and with cooling and heating function of capacity 1.5 Ton complete not less than 3 star rating all as specified and as directed by Engr-In-Charge. |
| 82 | Supply and fix refrigerator, electric driven (single phase), capacity more than 195 Litres upto to 310 Litres.BEE 5 star rated |
| 83 | Supply & fixinf of Deep freezer glass top more than 320 litre and up to 400 Litre capacity having double door complete. |
| 84 | S&F Water heater storage type (Geyser) vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe with adopter for inlet and outlet water connection, having adjustable knob for temperature control and inner tank should be glass line coated competed all as specified of capacity 25 ltr having heating element 2 KW and not less than 5 star rating. |
| 85 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete. |
| 86 | M & L for cutting the existing GI tube pipe for insertation of new Tee branches, reducers in any position of 15 mm dia pipe line complete all as specified and directed. |
| 87 | S&F tubes, 'medium grade', galvanised, with all fitting; laid in trenches, fixing on wall complete of bore 15mm dia all as specified and directed. |
| 88 | S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of cap 15mm dia complete all as directed. |
| 89 | S&F PVC Hot and Cold connection 15 mm size with PTMT nuts of length 300 mm. |
| 90 | S&F Fancy type 15mm dia Stop valves, cast copper alloy,screwed down,high pressure,with crutch orbutterfly handle,screwed bothends for iron pipe or for unions and fixed |
| 91 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with Louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 300mm along with hole for fixing of ex fam complete all as specified and directed . |
| 92 | M&L for submain wiring with two single core FRLS insulated flexible copper conductor cable of sze 4 sqmm and one single core PVC FRLS insulated flexible copper conductor cable green colour of size 4 Sqmm as earth lead in & including concealed PVC conduit medium grade cutting chases to walls for laying conduit all as required at site or directed by Engr-in-Charge. |
| 93 | Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and as directed by Engr-In-Charge. |
| 94 | M&L for additional length of Copper pipe for installing split type air conditioner at site of suitable size /guage complete all as directed by Engineer in Charge.Note Additional quantity both suction and discharge pipe has cosidered as one RM) |
| 95 | S&F MCB DB SPN 8 way Horizontal, IP - 43 Protection single door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete |
| 96 | S&F MCB ISOLATOR SPN 40 Amp, 'C' curve, 16 KA, 50 HZ, 240 volts |
| 97 | S&F MCB SP 6-32 Amps 240 volts 'C' curve series 10 KA 50 HZ complete all as specified and directed. |
| 98 | M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 10 Sqmm, earth continuity conductor of size 6.0 Sqmm to be drawn through and including PVC conduit 20mm dia medium Grade concealed in walls all as directed by Engineer in Charge. |
| 99 | M & L for concealed Flame Proof point wiring with FRLS-H, PVC insulated, unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size (Phase and Neutral) alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including In Stove enamelled steel conduit terminated and suitable for modular metal flush box as per site requirement for fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit piping in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface. |
| 100 | Supply and fixing Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V |
| 101 | Supply and fixing LED light fitting 2x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver,holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size. |
| 102 | Supply and laying of XLPE insulated,sheathed,armoured,heavy duty LT 1100 volts grade cable 10 Sqmm 2 core with aluminium conductor laid in trenches/pipes, fixed to poles/walls with suitable saddle complete all as directed. |
| 103 | Supply and fixing rating 240V, 10KA 'B'curve miniature circuit breaker (MCB) SPN and current carrying capacity 32 Amps in the MCB DB complete with connection testing and commissioning Make: Havells/Legrand/Anchor IN 'B' Series |
| 104 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand corrosion resistant including thermal management in multiple optics complete withIP 65/66 protection complete. including connections with 2 run of 2.5 Sq mm aluminium unsheathed wire multistranded from MCB Box / junction box to the connector of fitting, complete all as specified. |
| 105 | Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. |
| 106 | S & F street light bracket made out of GI tubing 32 / 40 mm dia, light grade of approx length 1.2 mtr long bend to shape suitable for security light fittings with necessary MS clamps - 02 Nos with one coat of anti corrosive primer and two coats of aluminium paint including nut, bolt, washers etc all as specified. |
| 107 | Supply and Laying jointing & testing XLPE insulated PVC sheathed armoured heavy duty electric cable with stranded aluminium conductor LT 1100 volts grade, cross sectional area 25 Sqmm 2 core with aluminium conductor complete fixed to floor/walls/pole/ceiling with suitable size of clamp/saddles complete all as specified and directed. |
| 108 | Supplying, laying and cushioning for cable protection in trenches 8 cm deep before laying cable and 15 cm deep over the cable including well punning complete all as specified and dierected |
| 109 | Supplying, laying sub class 'B' bricks old size with axis of the bricks perpendicular to the axis of the cable as in cable protection complete all as specified and directed. |
| 110 | Supply & Fixing in replacement GI tubing light grade in trenches/fixed to wall/ceiling including required GI fitting of size 40mm dia complete all as specified and directed |
| 111 | Supply and install hi wall split units indoor/ outdoor complete with cordless remote control unit and with cooling and heating function of capacity 1.5 Ton complete not less than 3 star rating all as specified and as directed by Engr-In-Charge. |
| 112 | M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid PVC casing caping ISI Marked and all conduit accessories concealed in wall/ceiling/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated branded modular metal flush box / M S steel terminal boxes, concealed in walls with suitable modular inner and outer plate / 3 mm thick laminated top sheet cover for housing switches , socket out let and fan regulators etc , all as specified and as directed for the followings:- complete all as specified and directed by Engineer in charge. |
| 113 | One 5 pin socket outlet 5 hole 5 Amp independent including PVC unsheathed copper conductor 1.5 Sqmm cable as earth wire connected to common earth and to earth dully socket & switches to be measured and paid separately. |
| 114 | ditto as above item No 113 but Same board. |
| 115 | One power point with insulated stranded copper conductor cable 4 Sqmm single core and PVC insulated FRLS 1100 Volts unsheathed copper conductor 2.5 Sqmm stranded conductor as earth wire connected to dolly complete (socket and switches to be measured and paid separately) |
| 116 | M&L Modular socket outlet 2/3 pin 6 Amp socket 2 module complete all as specified and directed by Engineer in charge. |
| 117 | S & F MCB SPN 32/40 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified. |
| 118 | S & F MCB SP 06 to 32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified. |
| 119 | S & F Energy efficient surface Mounted LED Luminire 20 watts 4' long, with acrylic cover complete with all accessories incl necessary two core copper wire for connection from ceiling rose to connector of approx length 0.75 mtr all as directed. |
| 120 | S&F 60W High efficient LED Street light fitting with pressure die cast Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie should more than 110lm/W. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:65 protected. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<10%, High and low protection along with a surge protection of 4 KV including provision of suitable dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on wall fixed complete as specified and directed. |
| 121 | Supply and fixing in repair square shape 36 watt 220 volts AC recessed mounting type low depth aesthetically designed LED 2x2 feet flat (Warm/ Warm White) panels, with high efficiency PMMA diffuser soft glare free light (Warm/ Warm White) suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 122 | M&L for Earthing complete with GI earth plate 60x60cmx6mm thick, burried directly in ground (Earth pit not less then 2.25 metres deep below ground level) with top edge of the plate not less then 1.5 metre below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron as earthing lead or steel all as shown in electrical plate No.5 and incl earth work, PCC pit and RCC cover, watering pipe 20mm dia medium grade, funnel, wiremesh, charcoal dust, 15 mm dia light grade protection pipe and salt etc and connected to earthing test point incl necessary earth work complete all as specified and as directed. |
| 123 | Notes :- Amount of Credit Schedule for Schedule 'A' Part-ll shall be deducted from total quoted amount of BOQ to arrive at the contract sum Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender