Tender For Repair Of False Ceiling, Wall Panelling, Kitchen Cabinets At Gr Units, Repair Of Damage And Broken Roof Sheet, Welcome Maintenance Of Various Md Accn, Repair Of Kitchen Cabinets And Att And Paintaing Of Various Building At Engineer Line,
Tender Value
31 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
12 days left
EMD
62000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Of False Ceiling, Wall Panelling, Kitchen Cabinets At Gr Units, Repair Of Damage And Broken Roof Sheet, Welcome Maintenance Of Various Md Accn, Repair Of Kitchen Cabinets And Att And Paintaing Of Various Building At Engineer Line, Kurukshetra Line
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of wall and ceiling board any thickness/description including cover fillet. |
| 2 | M & L for 4 mm thick Asbestos cement plain building boards, fixed to timber framework with screws |
| 3 | M&L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre incl 2mm dia G.I. ( upto 1200 mm length ) adjusting level to Purlins/ Rafter. . |
| 4 | M&L 4mm thick non asbestos fibre cement designer building board of size 600X600 fixed or laid/inserted to timber/GI/Aluminium framework fixed in ceiling flat or sloping. |
| 5 | Taking down chowkhats or frame n exc 1.5 sqm with shutters (without taking off shutters from the frames). |
| 6 | Taking down Shutters of any description n exc 1 sqm. |
| 7 | M&L 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work |
| 8 | S&F 75 mm Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21. |
| 9 | S&F 100 mm long aluminium anodised barrel tower bolt of extruded section complete. |
| 10 | S&F of 100 mm size aluminium handles cast type anodised. |
| 11 | S&F Anodised aluminium Hasp and staple of size 100mm, with mild steel hinge pin including bolt to hinge plate and fixed with screws |
| 12 | M&L 2nd class hard wood Plain fillets. square, rectangular or triangular in section, wrought finish, secured with screws of sectional area exc 13 sqcm but n exc 25 sqcm. |
| 13 | M&L, applying two coats of synthetic enamel paint over a coat of pink primer including preparation of newly wooden surfaces of any description exc10cm width or girth not otherwise described complete. |
| 14 | M&L Post construstion Anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. |
| 15 | M&L Post construstion Anti-termiteTreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors. |
| 16 | M&L Post construstion Anti-termiteTreatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same. |
| 17 | S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples . |
| 18 | S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty/ glazing pins/spring clips in square n exc. 0.5 sq. m in each pane |
| 19 | S&F in repair 20mm dia Aluminium powder coated as in golden colour finish draphery rod complete all as specified and as approved by EIC. |
| 20 | S&F in repair aluminium anodised decorative bracket fixed to wall . |
| 21 | Dismantling water tanks Capacity in Exc 500 & n exc 1000 litres and removing to store |
| 22 | S & F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) Capacity in 1000 litres hoisted and fixed in position all as specified in SSR Part I |
| 23 | S&F 20mm bore PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule. |
| 24 | S&F PVC (SWR) pipes 110 mm single socketed in any length with rubberring joints, laid in trenches or in floors |
| 25 | S&F Brass Chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified. |
| 26 | S&F in repair white EWC sheet cover all as specified. |
| 27 | S&F in repairs Health fauset (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook incl making connections and fixed in position complete in all respect as specified. |
| 28 | S&F in repair vitreous china pedastal type water closet, white (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe etc complete and making good to floor. |
| 29 | S&F, in repair 10ltr capacity PVC low level flushing cistern, white inlet ball valve, float and handle and connection to pipe including bracket . |
| 30 | S&F brass Chromium plated shower rose 125 mm size with or without swivel joints any size incl fixing of steel pipe or union . |
| 31 | S & F in repair vitreous china wash hand basin, white flat back of size 550 mm x 440 mm including brackets and making necessary arrangement for fixing complete all as specified and as directed. |
| 32 | S&F 32 mm bore dia of discharge pipe Waste coupling of PTMT(half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms) |
| 33 | S&F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia & 90 cm long, for low level cistern |
| 34 | M&L complete removal of existing treatment on walls and applying two coats of oil bound distemper of approved colour and shade over one coat of putty complete. |
| 35 | M&L for preparation of old decorated surfaces on walls and applying one coat of oil bound distemper of approved colour and shade |
| 36 | M&L Applying 3mm thick wall care putty on wall surfaces in layers wise and rubbing till obtaining smooth surfaces. |
| 37 | M&L for preparation of old decorated surfaces on ceiling surfaces and applying one coat of oil bound distemper of approved colour and shade |
| 38 | M&L 12mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work fixed with screws to timber frame work |
| 39 | S&F 3D Hinges stainless steel (autoclosing) |
| 40 | M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 CM width or girth and applying one coat of synthetic enamel paint of approved colour and shade |
| 41 | M&L for preparation of old painted steel or iron surfaces of any description not otherwise described over 10 CM width or girth and applying one coat of synthetic enamel paint of approved colour and shade |
| 42 | M&L for preparation of existing old wall/ ceiling surfaces and applying Two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterioe paint of required shade with silicon additives @ 1.43 ltr/10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10sqm . |
| 43 | M&L for preparation of old plasterd wall surfaces and applying one coat of cement based paint of approved colour and shade |
| 44 | Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering. |
| 45 | S & F, 6 mm thick Non-asbestos cement corrugated sheet fixed with ‘L’ type or ‘J’ type or cranked hook bolts. |
| 46 | Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings. |
| 47 | S&F prepainted galvalume aluminium zink coating GI based corrugated/ semi - corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with coach screw as per manufacturers instrution complete. |
| 48 | S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall and ridge,fixed with self tapping srews complete. |
| 49 | Dismantling timber scantling 40 sqcm and over in section in any position in framed work complete. |
| 50 | S&F Mild Steel Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates |
| 51 | M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified. |
| 52 | Demolition of brick wk masonry built in cement mortar incl all quoins arches pillars etc |
| 53 | M & L Brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius in CM 1:6 |
| 54 | M&L Brick work with sub class 'B' Brick straight or curved on plan to any radius in half brick thick wall built in cm 1:4 |
| 55 | M&L Rendering 10mm thick on fair faces of brick work or concrete surfacesand making even and smooth complete all as specified. |
| 56 | M&L for preparation of newly plastered wall surfaces and applying two coats of acrylic distemper over a coat of primer complete all as specified. Please Enable Macros to View BoQ information |
| 57 | M&L for preparation of newly plastered wall surfaces and applying two coats of acrylic distemper over a coat of primer complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 days