Tender For Provn Of Wpc Based Cupboard Shutter Including Shelves For Type-Iv And Type-V Md Accn At Cgra Paradip Under Ge (I) (Cg) Bhubaneswar
Tender Value
42.57 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
17 days left
EMD
85140
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kendrapara → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Wpc Based Cupboard Shutter Including Shelves For Type-Iv And Type-V Md Accn At Cgra Paradip Under Ge (I) (Cg) Bhubaneswar
BOQ
| Sl. No. | Item Description |
| 1 | Taking down wooden frame with shutter whithout taken off shutter from the frame ,exceeding 1.5 sqm but not exceeding 4 sqm each including removing from site complete all as specified and directed. |
| 2 | Taking down wooden frame with shutter whithout taken off shutter from the frame ,not exceeding 1.5 sqm each including removing from site complete all as specified and directed. |
| 3 | Taking down shealves from inside of cupboards after taking down of cupbard shutters of any description and of any size complete all as specified and directed. |
| 4 | M&L for rendering 10 mm thick other than fair faces of brick work in CM 1 : 4 finished even and smooth (without using extra cement) complete all as specified and directed. |
| 5 | M&L for preparation of newly/old plastered surface of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant priming paint & smooth surface over a coat of alkali resistant priming coat etc complete all as specified and directed. |
| 6 | M & L for factory made inbuilt cabinet box type 500 mm (inner depth) made with 18 mm thick WPC board in sides, top, bottom,shelves and back shall be made of 12 mm thick WPC Board, edges finished with 0.8 mm thick PVC tape and shutter shall be of 18 mm thick WPC Board duly laminated with 0.8mm thick laminated of white colour on inner side, and all exposed surface of cabinate shall be laminated with 0.1 mm thick laminate of any colour as approved by GE on front, edges of shutter finished with 2mm thick PVC edge band tape of required No of site, screws etc complete all as specified and directed. Make of board : green / JKD or Equivalent. The unit includes hardwares like soft close auto hinge,L Tower Bolt, 150mm / 200 mm handle & lock of make :Hettich/Hafele / Godrej or equivalent as per requirement . Note : Only the front surface of the cabinet shutter shall be measured for payment purpose in this item. Rates of all materials, fittings and fixtures are included in this item. |
| 7 | M & L for factory made inbuilt above wardrobe cabinet box type (without middle shelf) 500 mm (inner depth) made with 18 mm thick WPC board in sides, top, bottom,shelves and back shall be made of 12 mm thick WPC Board, edges finished with 0.8 mm thick PVC tape and shutter shall be of 18 mm thick WPC Board duly laminated with 0.8mm thick laminate of white colour on inner side, and all exposed surface of cabinate shall be laminated with 0.1 mm thick laminate of any colour as approved by GE on front, edges of shutter finished with 2mm thick PVC edge band tape of required width including fixing of wall at appropriate height with SS dash through fasteners of size 80 mm long as required No of site, screws etc complete all as specified and directed. Make of board : green / JKD or Equivalent. The unit includes hardwares like soft close auto hinge,L Tower Bolt, 150mm / 200 mm handle & lock of make :Hettich/Hafele / Godrej or equivalent as per requirement . Note : Only the front surface of the cabinet shutter shall be measured for payment purpose in this item. Rates of all materials, fittings and fixtures are included in this item. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysJul 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender