Tender For Repair To Drain, Plain Cement Concrete Path, Fencing, Wall And Hardstanding In Crlc Line, Arjun Line And Map Line In Ra At Cad Pulgaon
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Jul 2026
13 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Wardha → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Drain, Plain Cement Concrete Path, Fencing, Wall And Hardstanding In Crlc Line, Arjun Line And Map Line In Ra At Cad Pulgaon
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of PCC in any descriptions and in any position etc. complete all as specified and as directed. |
| 2 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade including 50 mm sand cushioning with grey cement and pigment complete all as specified and as directed. |
| 3 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade including 50 mm sand cushioning with grey cement and pigment complete all as specified and as directed. |
| 4 | M&L for 100 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling mass concrete and sub base complete all as specified and as directed. |
| 5 | M&L(in repair) for hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 6 | M&L for 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection/ path/hardstanding even and smooth without using extra cement complete all as specified and as directed. |
| 7 | M&L for 100mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in path/paving/hard standing and finishing the surfaces even and smooth without using extra cement including forming of joints 03mtr and joint filled with bitumin and sand mixture in 1:1 ratio including demoltion of existing damaged PCC and disposal of rubbish complete all as specified and as directed. complete all as specified and as directed. |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and complete all as specified and directed |
| 9 | M&L for coloured, textured finish/ non skid ceramic tiles of th (8-10 mm), area of each tile n exc 0.36sqm, laid in floors/path/ hardstanding/wall etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 10 | M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, laid in floors/path/ hardstanding/wall etc set and jointed in neat cement slurry with a mixture of white and grey cement with no pigments and incl 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 11 | M&L in repairs granite (of any type) work (table rubbed and polished) of 14-16 mm th as in steps,floor, jambs, pillars, window-cills, cooking platforms and like laid over cement screed of 10mm th in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 12 | Dismantling post or post struts (wood steel or RCC) any section, including taking out embedded portion and making good posts embedded in concrete complete all as specified and as directed. |
| 13 | Dismantling wrought iron or mild steel work of any description not otherwise provided for fencing post complete all as specified and as directed. |
| 14 | Excavation in post holes (soft/loose soil) each n.exc.0.5 cum, getting out, RFR in and ramming earth or broken rubble mixed wth earth around in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc. 50m. |
| 15 | M&L PCC 1:3:6 type C2 (using 40 mm graded aggregade ) in foundation filling and mass concrete for post holes complete all as specified and as directed. |
| 16 | M&L for reinforced cement concrete type B-1 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts straining or terminal posts, struts etc for fencing averge sectional area exc 100 and n exc 250 sq cm with or without chamfered angles and flat, splayed rounded or mitered tops and including necessary form work complete all as specified and as directed. |
| 17 | M & L for mild steel angle, flat work and other steel Sections as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or rivetting etc conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 18 | M & L for preparing new or previously untreated of steel and applying two coats of synthetic enamel paint over a coat of red oxide over 10 cm in width or girth complete all as specified and as directed. |
| 19 | Supply only Chain link MS galvanisd fencing of any size and any type complete all specified and directed |
| 20 | Fixing only chain link fencing incl. Line wire any mesh size and any type to any type of standard rails, straining bolts etc incl. Provision of binding wire complete all specified and directed |
| 21 | S&F in repair galvanised 2 strand, steel barbed wire 2.2 mm dia barbed wire with 2 mm dia barbs at 75 mm spacing and straining and fixing as directed by EIC. |
| 22 | S&F Mild steel screw bolts (machine made) 11 mm to 15 mm dia exceeing 5cm & n exc 10cm long with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and as directed. |
| 23 | M&L mild steel TMT bars 10 mm dia and over cut to length, bend to shape required, incl cranking bending spirally for hooking for column, hooking ends and binding with 0.9 mm dia annealed wire confirming to ISI complete all as specified and as directed. |
| 24 | M&L mild steel 6 to 8mm mm dia TMT bars as in stirrups, spacers and binders, bend to shape required, incl cranking bending spirally for hooking for column, hooking ends and binding with 0.9 mm dia annealed wire confirming to IS complete all as specified and as directed. |
| 25 | Supply only mild steel round bars 10mm dia as line bars for fixing chain link fencing |
| 26 | M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc.complete all as specified. |
| 27 | M&L in repairs precast cement concrete jallies in PCC (1:2:4) type B0 (12.5 graded agg), 35 mm thick (measured solid) set in CM 1:6 including all moulding etc complete all as specified and as directed. |
| 28 | M&L for preparation of new or old plastered/unplastered surfaces of wall and applying two coats of cement base paint over a coat of white cement primer complete all as specified and as directed. |
| 29 | M&L for preparation of new or old plastered/unplastered surfaces of wall and applying three coats of whitewash complete all as specified and as directed. |
| 30 | M&L for preparing new or previously untreated surfaces, of steel and iron work of any description not otherwise described not exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed. |
| 31 | Demolition of Brick work or Stone boulder masonary built in cement mortar complete all as specified and directed |
| 32 | M&L for brick work with sub class B bricks straight or curved on plan exc 6m in radius but built in 1:6 cement mortar complete all as specified and as directed. |
| 33 | M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1 : 6 complete all as specified and as directed. |
| 34 | M&L for Raised pointing to random or polygonal rubble, un coursed or brought upto courses CM 1:4 complete all as specified and as directed. |
| 35 | Taking down cement plaster of any description on brick/ Stone Walls or from Concrete Surfaces incl raking out joints, hacking for key, scrubbing down with water etc all as specified and removing unserviceable material outside premises complete all as specified and as directed. |
| 36 | M&L for 15mm thick rendering in two coats on stone/ brick/ concrete surfaces (external) finished even and smooth without using extra cement etc. 1st coat 10 mm thick in CM 1:6 and 2nd coat 5mm thick in CM 1:4 mixed with water proofing compound as per manufacturer instructions complete all as specified and as directed. |
| 37 | Demolition of PCC in any descriptions and in any position etc. complete all as specified and as directed. |
| 38 | M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directe incuding necessary formwork required complete all as specified and as directed. |
| 39 | M&L for preparation of new or old plastered/unplastered surfaces of wall and applying three coats of whitewash complete all as specified and as directed. |
| 40 | M&L for PCC(1:2:4) type B-1 (using 20mm graded stone aggregate) as in surface channel in drains including demolition of cement concrete (un reinforced) of any description and in any position complete all as specified and as directed. |
| 41 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc |
| 42 | Add or deduct for each 25 mm girth or part thereof over or under 30cm |
| 43 | M&L in repairs Reinforced concrete pipes, 300mm inner dia class NP2, laid and jointed complete with collars complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender