Tender For Misc B/R Repairs To Certain Guard Post, Watch Tower At Depot Perimeter Area And Preventive Measures For Anti Termite Treatment Inside Depot Area At Cad Pulgaon.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Jul 2026
13 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Wardha → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Misc B/R Repairs To Certain Guard Post, Watch Tower At Depot Perimeter Area And Preventive Measures For Anti Termite Treatment Inside Depot Area At Cad Pulgaon.
BOQ
| Sl. No. | Item Description |
| 1 | M & L for preparation of old plastered or unplastered surfaces including brooming down or steel wire brushing and applying one coat of white wash on Ceiling complete all as specified and as directed. |
| 2 | Complete Removal of existing treatment on walls including removing dirt, nails, making good holes cracks etc brooming down with steel wire brushing scrapping down smoke soots etc and applying Two or more coats of weather proof exterior acrylic emulsion paint (Appex or equavalent) including providing and applying putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 3 | M & L for applying one coat of oil bound distemper including prepration of old decorated surfaces of wall by Washing, rubbing down and stopping of distempered and painted surfaces complete all as specified and directed. |
| 4 | M&L Preparation of old painted surfaces of wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified. |
| 5 | M & L two coats of synthetic enamel paint over one coat of pink primer on wood or wooden based surface exc. 10cm width or girth including preparation of new or previously untreated surfaces complete all as specified and directed. |
| 6 | M&L Preparation of old painted surfaces of steel and iron work over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified. |
| 7 | M&L for applying two coat of Synthetic enamal paint over a coat of red oxide primer on new steel based surfaces exc.10cm width or girth including preparation all as specified and directed. |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 9 | M&L ceramic coloured matt finish tiles 7 to 8 mm thick ( square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm screed bedding in cm 1:6 as in floors complete all as specified and as directed . |
| 10 | All as item No (09) here in before but on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:4 complete all as specified. |
| 11 | M&L ceramic coloured matt finish tiles 7 to 8 mm thick ( square/rectangular) area of each tile exc. 0.06 sqm but n. exc, 0.11 sqm and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm screed bedding in cm 1:6 as in floors complete all as specified and as directed . |
| 12 | M&L glazed coloured ceramic tiles 450 x 300m x 7mm thick on vertical surfaces of walls as dado etc set and joined in neat cement slurry and pointed in white or coloured cement over and including 10mm thick rendering in cm 1:4 complete all as specified and as directed . |
| 13 | Dismantling ballies, hard or soft wood, any position, except in posts and struts; including taking out iron straps, bolts and nuts, etc., if type 3 or any all as per direction by Engr In Charge. |
| 14 | M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified. |
| 15 | Taking down cement plaster on bricks etc including raking out joints racking for key scrubbing down with water etc. |
| 16 | M&L rendering 15mm thick in CM 1:6 on fair faces of brick/stone wall or concrete surface finished even and smooth without using extra cement complete all as specified and directed. |
| 17 | M&L for rendering 15mm thick on fair faces of brick work/stone or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement for mixed with integral water proofing compound at the rate of 3% by weight of cement all as per manufactures instructions incl necessary scaffolding etc for any height complete all as specified and directed. Note : Water proofing compound will be measured and paid separately |
| 18 | S&F for Precast cement Concrete louvres and jallies, 25mm thick Type B0 (1:2:4) using (12.5mm aggregate ) including all mouldings but excluding frame (measured solid), set in cement mortar 1:6 |
| 19 | M & L for preparing newly plastered wall surfaces and applying two coats of oil bound distemper incl one coat of wall care putty complete all as specified and as directed. |
| 20 | M & L for preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of white cement primer complete all as specified and as directed. |
| 21 | S & F GI tubing 15mm bore medium graded with all fitting and Fixed complete to walls and ceilings or laid in floors, including taking down complete all as specified. |
| 22 | Refixing old steel tubing and connection new or old position on wall or under floor 15 mm bore of pipe complete all as specified and directed by EIC. |
| 23 | S & F GI tubing 20mm bore medium graded with all fitting and Fixed complete to walls and ceilings or laid in floors , including taking down complete all as specified. |
| 24 | Refixing old steel tubing and connection new or old position on wall or under floor 20 mm bore of pipe complete all as specified and directed by EIC. |
| 25 | M&L for 75 mm thick PCC 1:4:8 in cement concrete sub floors, sub bases , floors and pavings (using 40 mm graded aggregade ) in foundation for post holes. |
| 26 | S&F in repair CP bib taps 15mm bore dia, fancy type, cast copper alloy capstan head chromium plated, screwed down, screwed for iron pipe complete all as specified and directed. |
| 27 | S&F in repairs vitreous china wash basin white of size 550x400 mm including 32 mm CP waste coupling & PVC flexible waste pipe of min 90 cm long, flat back or angle back type excluding taps, waste chain & plug but incuding cast iron brackets and cutting for and pinning in ends of brackets or erecting stand complete fixed in repairs all as specified and directed. |
| 28 | S&F (in repairs) vitreous china squatting pan 'orissa pattern' size 580 x 450 mm white with integral foot rest (ISI marked) with 'P' or 'S' trap, front or back inlet and foot rest any pattern, including connection to flushing pipe anti-syphonage pipe etc, including setting of pan & trap in lean PCC 1:5:10 complete and making good to distrubed floor with PCC or cement mortar 1:3 to match with sorroundings all as directed. |
| 29 | S&F (in repairs) vitreous china wash down water closet pan (Padestal pattern), white (ISI marked), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonoage pipe etc & with plastic WC seat cover (white) closed pattern with flat bottom and cover and suitable mild steel chromium plated or aluminised hinging device complete all as specified. (Make : Hindware/Cera as approved by GE). |
| 30 | S&F in repairs PVC low level flushing cistern 10 litrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of polythelene of low or high density of PVC 32mm dia for LLFC make Dolfine/Commander Champion, complete all as specified. |
| 31 | S&F in repairs for towel rails of 20mm dia tubular brass chromium plated 60cm long 'D' type fixed to all as directed by Engr-in-charge including taking down existing towel rail. |
| 32 | Supply and fix 110mm PVC (SWR) WC connector bent type all as specified and as directed. |
| 33 | S&F in repairs 15mm bore, stop valve/angle valve, chromium plated, fancy type cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed. |
| 34 | S&F in repairs 15 mm dia fancy type, pillar taps cast copper alloy with capstan head chromium plate screwed dwon high pressure long shank and fly nut screwed for iron pipecomplete all as specified and directed. |
| 35 | S&F PVC connection 15mm size with PTMT nuts, length 450 mm complete all as specified and directed. |
| 36 | S&F PVC flexible waste pipe with PVC cap suitable for fixing to WHB waste coupling in suitable length 32 mm dia omplete all as specified and directed. |
| 37 | Dismantling AC Pipe/ PVC pipes 75/110 mm dia |
| 38 | S&F 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors complete all as directed. |
| 39 | All as per item No 38 here in before but fixed to walls with clamps complete all as directed. |
| 40 | S&F 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors all as specified and directed. |
| 41 | S&F PVC(SWR) reducers 110mmX75mm dia. |
| 42 | S&F PVC (SWR) bends 75mm dia any radius complete all as directed. |
| 43 | S&F PVC (SWR) 75mm dia Floor Trap, plain with grating including jointing with solvent cement all as directed. |
| 44 | M & L for 40mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in flooring finished even and smooth without using extra cement complete all as specified and as directed. |
| 45 | M & L for 100mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in path/paving/hard standing and finishing the surfaces even and smooth without using exra cement complete all as specified and as directed. |
| 46 | Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' |
| 47 | Supply only Ingergral water proofing compound |
| 48 | M&L for Chequred cement concrete coloured tiles with glozy finish painted surface size 300 mm x 300 m x 22-25 mm thick laid over and including 20 mm thick cement mortar screed in CM 1:6 as in floors complete all as specified and directed. |
| 49 | Dismantling water tanks of capacity exceeding 250 & not exceeding 500 ltrs and removing to store |
| 50 | S&F Rotational moulded polyethylene water storage tanks, tripple layer (cylinderical vertical with closed top) of 500 ltrs capacity hoisted and fixed in position all as specified in SSR Part-I |
| 51 | S&F for Gun-metal, globe or gate valves 20mm dia, with iron wheel head, screwed both ends for iron pipe and fixed |
| 52 | S&F in repairs ball brass valves, high pressure, with polythene float and flynut complete, screwed for 20 mm dia iron pipe or brass ferrule. |
| 53 | S&F in repairs 15 mm dia fancy type, pillar taps cast copper alloy with capstan head chromium plate screwed dwon high pressure long shank and fly nut screwed for iron pipecomplete all as specified and directed. |
| 54 | Taking down chowkats or frames with shutters (without taking off shutters) of any description exc 1.50 Sqm but n.exc 4 Sqm each all as specified and directed. |
| 55 | Taking down chowkats or frames with shutters (without taking off shutters) of any description n exc 1.50 Sqm each all as specified and directed. |
| 56 | Hacking out old broken glass of any thickness/size & any description from wooden or steel frame fixed with clips/putty/wooden beading and S&F with 3.50mm thick ordinary sheet glass fixed with clips and oil putty/wooden beading completed in squares not exc 0.50 Sqm each pane all as specified and as directed. |
| 57 | S&F floor door stopper of aluminium alloy body and tounge anodised with hard drawn steel spring fixed in floor 140mm long overall length of cover plate complete all as spicified. |
| 58 | Supply & Fixing in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by EIC. |
| 59 | S&F for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, all as per specified and directed. |
| 60 | S & F 35mm thick, factory made panelled door shutter (two panel), plain, framed with 2nd class hard wood lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and stile as per IS-1003 (Part I), kiln seasoned and chemically pressure treated complete as specified and directed. |
| 61 | S & F 35 mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc (without sash bars) fitted with cut and mitred securing beads for securing glass etc complete as specified and directed sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (a) complete all as specified and directed. |
| 62 | -Ditto- as above if windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b) |
| 63 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm, single side prelam PVC sheet used and edges will be painted to match with printed to match with prelam sheet, reinforced with MS square tube & fixing in opening including hold fast. |
| 64 | S&F factory made solid PVC Moulded door shutter 28 to 30mm thick (Stiles) with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and directed. |
| 65 | S&F for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by EIC. |
| 66 | Supply and fix MS butt hinges, 100mm medium weight and fixed all as directed. |
| 67 | S & F 150 mm aluminium anodised barrel tower bolts of extruded section |
| 68 | S & F 150 mm extruded aluminium alloy handles , fabricated type, anodised |
| 69 | S&F Mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia, 300mm leng, with and including a minimum of 6 bolts and nut, four on bolt plate and two on staple plate and fixed |
| 70 | S&F door spring with 300mm mild steel rat rail rod pattern of standard quality including roller and roller plate complete Helical spring) |
| 71 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as specified. |
| 72 | M&L in repair for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete all as specified. |
| 73 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified |
| 74 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified |
| 75 | M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified |
| 76 | S&F for Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members |
| 77 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 78 | M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, and eves board fixed with self tapping screws as specified |
| 79 | M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified |
| 80 | Dismantling of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles. |
| 81 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15cm thick (below or above ground level) complete all as specified and directed |
| 82 | Demolition of reinforcement cement Concrete of any description and in any position (reinforcement cut as required to facilitte demolition) all as specified and as directed. |
| 83 | M&L for brick work with Old size Fly ash ’ bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 84 | M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate in foundations, filling and mass concrete. |
| 85 | M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in cement mortar 1:4 complete all as specified & as directed. |
| 86 | M&L for PCC 1:2:4 type B1 using 20mm graded stone aggragate as in coping/bed blocks, bed plates etc including weathering slightly rounded or chamfered angles and throating making groves for fixing of man hole cover including necessary form work |
| 87 | Material and labour for 25 mm thick Cement concrete type B-0, 1:2:4 (12.5 mm graded stone aggregate) as under floor tiles finished the surface even and fair complete all as specified and as directed by Engineer-In-Charge. |
| 88 | M & L for 75mm thick cement concrete (1:3:6) type C1 using 20 mm thick graded stone aggregate as in plinth protection laid in alternate bays n exc 2.5m length finished even & smooth and joint to be filled with Bituminous mastic filling including necessary form work complete all as specified and directed. |
| 89 | M&L for hard core of broken stone or boulders of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled/ rammed to a true surface complete all as specified and directed. |
| 90 | M&L for rendering 15mm thick in cement mortar 1:4 on brick/stone masonry surfaces or surfaces of brick/Stone work of walls, finishing the surface even & smooth without using extra cement complete all as specified. |
| 91 | Supply only Liquid water proofing admixture |
| 92 | M&L cement concrete 100mm thick 1:2:4 type B-2 using 40mm graded stone aggregate as in pathways/hardstanding/berms etc, laid in alternate ways, each panel not exceeding 3.00 Sqm finished the surface even and fair without using extra cement and joint to be filled with Bituminous mastic filling including necessary form work complete all as specified & directed. |
| 93 | M&L preparing new plastered surfaces of walls and applying two coats of cement paint over a coat of water primer complete as specified and directed. |
| 94 | M & L two coats of synthetic enamel paint on old steel surfaces of any description over 10cm width or girth including preparation all as specified and directed. |
| 95 | Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Hard/dense soil for repair of road side berms. |
| 96 | M&L Moorum/Red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering |
| 97 | Removing excvated soil n exc 50mtr and depositing where directed at a level n exc 1.5 above starting point. |
| 98 | M& L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed. |
| 99 | M& L for along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 100 | M& L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling andplugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 101 | M& L for of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 102 | M& L for at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed. |
| 103 | Taking down shutter of any description not exc 1 Sqm each all as specified and directed. |
| 104 | Taking down shutter of any description exc 1 Sqm and n.exc 2 sqm each all as specified and directed. |
| 105 | S&F in repairs 100 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed . |
| 106 | S&F in repairs 100 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed . |
| 107 | S&F 30 mm thick factory made glazed skeleton shutter of 2nd class HW, open rebated and prepared to receive glass/gauze, divided into squares with plain chamfered mitred and rebated sash bar as in window/ventilator, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(b) supplied and fitted to chowkats complete all as specified & directed . |
| 108 | M&L in repairs 8-9mm thick designer ceiling board in ceiling fixed with screw as per manufactures instructions, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33mm thick galvanized steel sheet & of size T 24x32mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 4mm dia fixed pipe or wall plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runners at 600mm c/c to form 600x600mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19x19mm of white colour all as per instruction complete all as specified and as directed. |
| 109 | S&F 300 mm aluminium alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jun 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender